aboutsummaryrefslogtreecommitdiffstats
path: root/arch/s390/mm/fault.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-14Merge branch 'fixes' into featuresVasily Gorbik1-2/+0
* fixes: s390/smp: enforce lowcore protection on CPU restart s390/boot: fix absolute zero lowcore corruption on boot s390/hugetlb: fix prepare_hugepage_range() check for 2 GB hugepages s390: update defconfigs s390: fix nospec table alignments s390/mm: remove useless hugepage address alignment Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-08-30s390/mm: remove unused access parameter from do_fault_error()Heiko Carstens1-8/+7
Remove unused access parameter from do_fault_error() which also makes the code a bit more readable since quite some callers can be simplified. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-08-30s390/mm: remove useless hugepage address alignmentGerald Schaefer1-2/+0
The failing address alignment to HPAGE_MASK in do_exception(), for hugetlb faults, was useless from the beginning. With 2 GB hugepage support it became wrong, but w/o further negative impact. Now it could have negative performance impact because it breaks the cacheline optimization for process_huge_page(). Therefore, remove it. Note that we still have failing address alignment by HW to PAGE_SIZE, for all page faults, not just hugetlb faults. So this patch will not fix UFFD_FEATURE_EXACT_ADDRESS for userfaultfd handling. It will just move the failing address for hugetlb faults a bit closer to the real address, at 4K page granularity, similar to normal page faults. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-08-25s390/mm: do not trigger write fault when vma does not allow VM_WRITEGerald Schaefer1-1/+3
For non-protection pXd_none() page faults in do_dat_exception(), we call do_exception() with access == (VM_READ | VM_WRITE | VM_EXEC). In do_exception(), vma->vm_flags is checked against that before calling handle_mm_fault(). Since commit 92f842eac7ee3 ("[S390] store indication fault optimization"), we call handle_mm_fault() with FAULT_FLAG_WRITE, when recognizing that it was a write access. However, the vma flags check is still only checking against (VM_READ | VM_WRITE | VM_EXEC), and therefore also calling handle_mm_fault() with FAULT_FLAG_WRITE in cases where the vma does not allow VM_WRITE. Fix this by changing access check in do_exception() to VM_WRITE only, when recognizing write access. Link: https://lkml.kernel.org/r/20220811103435.188481-3-david@redhat.com Fixes: 92f842eac7ee3 ("[S390] store indication fault optimization") Cc: <stable@vger.kernel.org> Reported-by: David Hildenbrand <david@redhat.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-08-05Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds1-0/+12
Pull MM updates from Andrew Morton: "Most of the MM queue. A few things are still pending. Liam's maple tree rework didn't make it. This has resulted in a few other minor patch series being held over for next time. Multi-gen LRU still isn't merged as we were waiting for mapletree to stabilize. The current plan is to merge MGLRU into -mm soon and to later reintroduce mapletree, with a view to hopefully getting both into 6.1-rc1. Summary: - The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe Lin, Yang Shi, Anshuman Khandual and Mike Rapoport - Some kmemleak fixes from Patrick Wang and Waiman Long - DAMON updates from SeongJae Park - memcg debug/visibility work from Roman Gushchin - vmalloc speedup from Uladzislau Rezki - more folio conversion work from Matthew Wilcox - enhancements for coherent device memory mapping from Alex Sierra - addition of shared pages tracking and CoW support for fsdax, from Shiyang Ruan - hugetlb optimizations from Mike Kravetz - Mel Gorman has contributed some pagealloc changes to improve latency and realtime behaviour. - mprotect soft-dirty checking has been improved by Peter Xu - Many other singleton patches all over the place" [ XFS merge from hell as per Darrick Wong in https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ] * tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits) tools/testing/selftests/vm/hmm-tests.c: fix build mm: Kconfig: fix typo mm: memory-failure: convert to pr_fmt() mm: use is_zone_movable_page() helper hugetlbfs: fix inaccurate comment in hugetlbfs_statfs() hugetlbfs: cleanup some comments in inode.c hugetlbfs: remove unneeded header file hugetlbfs: remove unneeded hugetlbfs_ops forward declaration hugetlbfs: use helper macro SZ_1{K,M} mm: cleanup is_highmem() mm/hmm: add a test for cross device private faults selftests: add soft-dirty into run_vmtests.sh selftests: soft-dirty: add test for mprotect mm/mprotect: fix soft-dirty check in can_change_pte_writable() mm: memcontrol: fix potential oom_lock recursion deadlock mm/gup.c: fix formatting in check_and_migrate_movable_page() xfs: fail dax mount if reflink is enabled on a partition mm/memcontrol.c: remove the redundant updating of stats_flush_threshold userfaultfd: don't fail on unrecognized features hugetlb_cgroup: fix wrong hugetlb cgroup numa stat ...
2022-07-13KVM: s390: pv: handle secure storage exceptions for normal guestsClaudio Imbrenda1-1/+12
With upcoming patches, normal guests might touch secure pages. This patch extends the existing exception handler to convert the pages to non secure also when the exception is triggered by a normal guest. This can happen for example when a secure guest reboots; the first stage of a secure guest is non secure, and in general a secure guest can reboot into non-secure mode. If the secure memory of the previous boot has not been cleared up completely yet (which will be allowed to happen in an upcoming patch), a non-secure guest might touch secure memory, which will need to be handled properly. This means that gmap faults must be handled and not cause termination of the process. The handling is the same as userspace accesses, it's enough to translate the gmap address to a user address and then let the normal user fault code handle it. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Link: https://lore.kernel.org/r/20220628135619.32410-4-imbrenda@linux.ibm.com Message-Id: <20220628135619.32410-4-imbrenda@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-07-13KVM: s390: pv: handle secure storage violations for protected guestsClaudio Imbrenda1-0/+10
A secure storage violation is triggered when a protected guest tries to access secure memory that has been mapped erroneously, or that belongs to a different protected guest or to the ultravisor. With upcoming patches, protected guests will be able to trigger secure storage violations in normal operation. This happens for example if a protected guest is rebooted with deferred destroy enabled and the new guest is also protected. When the new protected guest touches pages that have not yet been destroyed, and thus are accounted to the previous protected guest, a secure storage violation is raised. This patch adds handling of secure storage violations for protected guests. This exception is handled by first trying to destroy the page, because it is expected to belong to a defunct protected guest where a destroy should be possible. Note that a secure page can only be destroyed if its protected VM does not have any CPUs, which only happens when the protected VM is being terminated. If that fails, a normal export of the page is attempted. This means that pages that trigger the exception will be made non-secure (in one way or another) before attempting to use them again for a different secure guest. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Link: https://lore.kernel.org/r/20220628135619.32410-3-imbrenda@linux.ibm.com Message-Id: <20220628135619.32410-3-imbrenda@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-06-16mm: avoid unnecessary page fault retires on shared memory typesPeter Xu1-0/+12
I observed that for each of the shared file-backed page faults, we're very likely to retry one more time for the 1st write fault upon no page. It's because we'll need to release the mmap lock for dirty rate limit purpose with balance_dirty_pages_ratelimited() (in fault_dirty_shared_page()). Then after that throttling we return VM_FAULT_RETRY. We did that probably because VM_FAULT_RETRY is the only way we can return to the fault handler at that time telling it we've released the mmap lock. However that's not ideal because it's very likely the fault does not need to be retried at all since the pgtable was well installed before the throttling, so the next continuous fault (including taking mmap read lock, walk the pgtable, etc.) could be in most cases unnecessary. It's not only slowing down page faults for shared file-backed, but also add more mmap lock contention which is in most cases not needed at all. To observe this, one could try to write to some shmem page and look at "pgfault" value in /proc/vmstat, then we should expect 2 counts for each shmem write simply because we retried, and vm event "pgfault" will capture that. To make it more efficient, add a new VM_FAULT_COMPLETED return code just to show that we've completed the whole fault and released the lock. It's also a hint that we should very possibly not need another fault immediately on this page because we've just completed it. This patch provides a ~12% perf boost on my aarch64 test VM with a simple program sequentially dirtying 400MB shmem file being mmap()ed and these are the time it needs: Before: 650.980 ms (+-1.94%) After: 569.396 ms (+-1.38%) I believe it could help more than that. We need some special care on GUP and the s390 pgfault handler (for gmap code before returning from pgfault), the rest changes in the page fault handlers should be relatively straightforward. Another thing to mention is that mm_account_fault() does take this new fault as a generic fault to be accounted, unlike VM_FAULT_RETRY. I explicitly didn't touch hmm_vma_fault() and break_ksm() because they do not handle VM_FAULT_RETRY even with existing code, so I'm literally keeping them as-is. Link: https://lkml.kernel.org/r/20220530183450.42886-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vineet Gupta <vgupta@kernel.org> Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm part] Acked-by: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Brian Cain <bcain@quicinc.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Weinberger <richard@nod.at> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Will Deacon <will@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Simek <monstr@monstr.eu> Cc: Matt Turner <mattst88@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: David Hildenbrand <david@redhat.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Chris Zankel <chris@zankel.net> Cc: Hugh Dickins <hughd@google.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Helge Deller <deller@gmx.de> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-03-08s390/extable: add and use fixup_exception helper functionHeiko Carstens1-6/+1
Add and use fixup_exception helper function in order to remove the duplicated exception handler fixup code at several places. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/extable: move extable related functions to mm/extable.cHeiko Carstens1-12/+0
Just like arm64, riscv, and x86 move extable related functions to mm/extable.c. This is currently only one function, but this will change with subsequent changes. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/extable: move EX_TABLE define to asm-extable.hHeiko Carstens1-0/+1
Follow arm64 and riscv and move the EX_TABLE define to asm-extable.h which is a lot less generic than the current linkage.h. Also make sure that all files which contain EX_TABLE usages actually include the new header file. This should make sure that the files always compile and there won't be any random compile breakage due to other header file dependencies. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/extable: search amode31 extable lastHeiko Carstens1-6/+6
It is very unlikely that an exception happens within the amode31 text section, therefore safe a couple of cycles for the common case, and search the amode31 extable last. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-01-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-14/+14
Merge misc updates from Andrew Morton: "146 patches. Subsystems affected by this patch series: kthread, ia64, scripts, ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak, dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap, memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb, userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp, ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits) mm/damon: hide kernel pointer from tracepoint event mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging mm/damon/dbgfs: remove an unnecessary variable mm/damon: move the implementation of damon_insert_region to damon.h mm/damon: add access checking for hugetlb pages Docs/admin-guide/mm/damon/usage: update for schemes statistics mm/damon/dbgfs: support all DAMOS stats Docs/admin-guide/mm/damon/reclaim: document statistics parameters mm/damon/reclaim: provide reclamation statistics mm/damon/schemes: account how many times quota limit has exceeded mm/damon/schemes: account scheme actions that successfully applied mm/damon: remove a mistakenly added comment for a future feature Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning Docs/admin-guide/mm/damon/usage: remove redundant information Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks mm/damon: convert macro functions to static inline functions mm/damon: modify damon_rand() macro to static inline function mm/damon: move damon_rand() definition into damon.h ...
2022-01-15mm: remove redundant check about FAULT_FLAG_ALLOW_RETRY bitQi Zheng1-14/+14
Since commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times") allowed VM_FAULT_RETRY for multiple times, the FAULT_FLAG_ALLOW_RETRY bit of fault_flag will not be changed in the page fault path, so the following check is no longer needed: flags & FAULT_FLAG_ALLOW_RETRY So just remove it. [akpm@linux-foundation.org: coding style fixes] Link: https://lkml.kernel.org/r/20211110123358.36511-1-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kirill Shutemov <kirill@shutemov.name> Cc: Peter Xu <peterx@redhat.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-10s390/mm: add missing phys_to_virt translation to page table dumperHeiko Carstens1-4/+4
The page table dumper walks page table tables without using standard page table primitives in order to also dump broken entries. However it currently does not translate physical to virtual addresses before dereferencing them. Therefore add this missing translation. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-10-20exit: Remove calls of do_exit after noreturn versions of dieEric W. Biederman1-2/+0
On nds32, openrisc, s390, sh, and xtensa the function die never returns. Mark die __noreturn so that no one expects die to return. Remove the do_exit calls after die as they will never be reached. Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: openrisc@lists.librecores.org Cc: Nick Hu <nickhu@andestech.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: linux-sh@vger.kernel.org Cc: linux-xtensa@linux-xtensa.org Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Fixes: 2.3.16 Fixes: 2.3.99-pre8 Fixes: 3f65ce4d141e ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 5") Fixes: 664eec400bf8 ("nds32: MMU fault handling and page table management") Fixes: 61e85e367535 ("OpenRISC: Memory management") Link: https://lkml.kernel.org/r/20211020174406.17889-2-ebiederm@xmission.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2021-09-07Revert "mm/gup: remove try_get_page(), call try_get_compound_head() directly"Linus Torvalds1-1/+1
This reverts commit 9857a17f206ff374aea78bccfb687f145368be2e. That commit was completely broken, and I should have caught on to it earlier. But happily, the kernel test robot noticed the breakage fairly quickly. The breakage is because "try_get_page()" is about avoiding the page reference count overflow case, but is otherwise the exact same as a plain "get_page()". In contrast, "try_get_compound_head()" is an entirely different beast, and uses __page_cache_add_speculative() because it's not just about the page reference count, but also about possibly racing with the underlying page going away. So all the commentary about how "try_get_page() has fallen a little behind in terms of maintenance, try_get_compound_head() handles speculative page references more thoroughly" was just completely wrong: yes, try_get_compound_head() handles speculative page references, but the point is that try_get_page() does not, and must not. So there's no lack of maintainance - there are fundamentally different semantics. A speculative page reference would be entirely wrong in "get_page()", and it's entirely wrong in "try_get_page()". It's not about speculation, it's purely about "uhhuh, you can't get this page because you've tried to increment the reference count too much already". The reason the kernel test robot noticed this bug was that it hit the VM_BUG_ON() in __page_cache_add_speculative(), which is all about verifying that the context of any speculative page access is correct. But since that isn't what try_get_page() is all about, the VM_BUG_ON() tests things that are not correct to test for try_get_page(). Reported-by: kernel test robot <oliver.sang@intel.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge misc updates from Andrew Morton: "173 patches. Subsystems affected by this series: ia64, ocfs2, block, and mm (debug, pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap, bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock, oom-kill, migration, ksm, percpu, vmstat, and madvise)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits) mm/madvise: add MADV_WILLNEED to process_madvise() mm/vmstat: remove unneeded return value mm/vmstat: simplify the array size calculation mm/vmstat: correct some wrong comments mm/percpu,c: remove obsolete comments of pcpu_chunk_populated() selftests: vm: add COW time test for KSM pages selftests: vm: add KSM merging time test mm: KSM: fix data type selftests: vm: add KSM merging across nodes test selftests: vm: add KSM zero page merging test selftests: vm: add KSM unmerge test selftests: vm: add KSM merge test mm/migrate: correct kernel-doc notation mm: wire up syscall process_mrelease mm: introduce process_mrelease system call memblock: make memblock_find_in_range method private mm/mempolicy.c: use in_task() in mempolicy_slab_node() mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies mm/mempolicy: advertise new MPOL_PREFERRED_MANY mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY ...
2021-09-03mm/gup: remove try_get_page(), call try_get_compound_head() directlyJohn Hubbard1-1/+1
try_get_page() is very similar to try_get_compound_head(), and in fact try_get_page() has fallen a little behind in terms of maintenance: try_get_compound_head() handles speculative page references more thoroughly. There are only two try_get_page() callsites, so just call try_get_compound_head() directly from those, and remove try_get_page() entirely. Also, seeing as how this changes try_get_compound_head() into a non-static function, provide some kerneldoc documentation for it. Link: https://lkml.kernel.org/r/20210813044133.1536842-4-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-08-05s390: rename dma section to amode31Heiko Carstens1-2/+2
The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-30s390: add support for KFENCESven Schnelle1-2/+7
Signed-off-by: Sven Schnelle <svens@linux.ibm.com> [hca@linux.ibm.com: simplify/rework code] Link: https://lore.kernel.org/r/20210728190254.3921642-4-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-08s390/signal: remove sigreturn on stackSven Schnelle1-23/+0
{rt_}sigreturn is now called from the vdso, so we no longer need the svc on the stack, and therefore no hack to support that mechanism on machines with non-executable stack. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-05s390: mm: Fix secure storage access exception handlingJanosch Frank1-0/+26
Turns out that the bit 61 in the TEID is not always 1 and if that's the case the address space ID and the address are unpredictable. Without an address and its address space ID we can't export memory and hence we can only send a SIGSEGV to the process or panic the kernel depending on who caused the exception. Unfortunately bit 61 is only reliable if we have the "misc" UV feature bit. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: 084ea4d611a3d ("s390/mm: add (non)secure page access exceptions handlers") Cc: stable@vger.kernel.org Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18sched: Introduce task_is_running()Peter Zijlstra1-1/+1
Replace a bunch of 'p->state == TASK_RUNNING' with a new helper: task_is_running(p). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210611082838.222401495@infradead.org
2021-04-12s390/traps,mm: add conditional trap handlersHeiko Carstens1-16/+2
Add conditional trap handlers similar to conditional system calls (COND_SYSCALL), to reduce the number of ifdefs. Trap handlers which may or may not exist depending on config options are supposed to have a COND_TRAP entry, which redirects to default_trap_handler() for non-existent trap handlers during link time. This allows to get rid of the secure execution trap handlers for the !PGSTE case. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-01-19s390: convert to generic entrySven Schnelle1-1/+1
This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-23s390/mm: remove set_fs / rework address space handlingHeiko Carstens1-22/+7
Remove set_fs support from s390. With doing this rework address space handling and simplify it. As a result address spaces are now setup like this: CPU running in | %cr1 ASCE | %cr7 ASCE | %cr13 ASCE ----------------------------|-----------|-----------|----------- user space | user | user | kernel kernel, normal execution | kernel | user | kernel kernel, kvm guest execution | gmap | user | kernel To achieve this the getcpu vdso syscall is removed in order to avoid secondary address mode and a separate vdso address space in for user space. The getcpu vdso syscall will be implemented differently with a subsequent patch. The kernel accesses user space always via secondary address space. This happens in different ways: - with mvcos in home space mode and directly read/write to secondary address space - with mvcs/mvcp in primary space mode and copy from primary space to secondary space or vice versa - with e.g. cs in secondary space mode and access secondary space Switching translation modes happens with sacf before and after instructions which access user space, like before. Lazy handling of control register reloading is removed in the hope to make everything simpler, but at the cost of making kernel entry and exit a bit slower. That is: on kernel entry the primary asce is always changed to contain the kernel asce, and on kernel exit the primary asce is changed again so it contains the user asce. In kernel mode there is only one exception to the primary asce: when kvm guests are executed the primary asce contains the gmap asce (which describes the guest address space). The primary asce is reset to kernel asce whenever kvm guest execution is interrupted, so that this doesn't has to be taken into account for any user space accesses. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-09-14s390: add 3f program exception handlerJanosch Frank1-0/+20
Program exception 3f (secure storage violation) can only be detected when the CPU is running in SIE with a format 4 state description, e.g. running a protected guest. Because of this and because user space partly controls the guest memory mapping and can trigger this exception, we want to send a SIGSEGV to the process running the guest and not panic the kernel. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Cc: <stable@vger.kernel.org> # 5.7 Fixes: 084ea4d611a3 ("s390/mm: add (non)secure page access exceptions handlers") Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-08-12mm/s390: use general page fault accountingPeter Xu1-15/+1
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Link: http://lkml.kernel.org/r/20200707225021.200906-19-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12mm: do page fault accounting in handle_mm_faultPeter Xu1-1/+1
Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-20s390/kernel: expand exception table logic to allow new handling optionsIlya Leoshkevich1-3/+1
This is a s390 port of commit 548acf19234d ("x86/mm: Expand the exception table logic to allow new handling options"), which is needed for implementing BPF_PROBE_MEM on s390. The new handler field is made 64-bit in order to allow pointing from dynamically allocated entries to handlers in kernel text. Unlike on x86, NULL is used instead of ex_handler_default. This is because exception tables are used by boot/text_dma.S, and it would be a pain to preserve ex_handler_default. The new infrastructure is ignored in early_pgm_check_handler, since there is no pt_regs. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/mm: fix typo in commentHeiko Carstens1-1/+1
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-06-18maccess: rename probe_kernel_address to get_kernel_nofaultChristoph Hellwig1-1/+1
Better describe what this helper does, and match the naming of copy_from_kernel_nofault. Also switch the argument order around, so that it acts and looks like get_user(). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mmap locking API: convert mmap_sem commentsMichel Lespinasse1-1/+1
Convert comments that reference mmap_sem to reference mmap_lock instead. [akpm@linux-foundation.org: fix up linux-next leftovers] [akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil] [akpm@linux-foundation.org: more linux-next fixups, per Michel] Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse1-7/+7
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport1-1/+0
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge yet more updates from Andrew Morton: - Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc, gup, hugetlb, pagemap, memremap) - Various other things (hfs, ocfs2, kmod, misc, seqfile) * akpm: (34 commits) ipc/util.c: sysvipc_find_ipc() should increase position index kernel/gcov/fs.c: gcov_seq_next() should increase position index fs/seq_file.c: seq_read(): add info message about buggy .next functions drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings change email address for Pali Rohár selftests: kmod: test disabling module autoloading selftests: kmod: fix handling test numbers above 9 docs: admin-guide: document the kernel.modprobe sysctl fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once() kmod: make request_module() return an error when autoloading is disabled mm/memremap: set caching mode for PCI P2PDMA memory to WC mm/memory_hotplug: add pgprot_t to mhp_params powerpc/mm: thread pgprot_t through create_section_mapping() x86/mm: introduce __set_memory_prot() x86/mm: thread pgprot_t through init_memory_mapping() mm/memory_hotplug: rename mhp_restrictions to mhp_params mm/memory_hotplug: drop the flags field from struct mhp_restrictions mm/special: create generic fallbacks for pte_special() and pte_mkspecial() mm/vma: introduce VM_ACCESS_FLAGS mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS ...
2020-04-10mm/vma: introduce VM_ACCESS_FLAGSAnshuman Khandual1-1/+1
There are many places where all basic VMA access flags (read, write, exec) are initialized or checked against as a group. One such example is during page fault. Existing vma_is_accessible() wrapper already creates the notion of VMA accessibility as a group access permissions. Hence lets just create VM_ACCESS_FLAGS (VM_READ|VM_WRITE|VM_EXEC) which will not only reduce code duplication but also extend the VMA accessibility concept in general. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Salter <msalter@redhat.com> Cc: Nick Hu <nickhu@andestech.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Springer <rspringer@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/1583391014-8170-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-06s390/mm: use fallthrough;Joe Perches1-2/+0
Convert the various uses of fallthrough comments to fallthrough; Done via script Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe.com/ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-04Merge tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds1-11/+10
Pull s390 updates from Vasily Gorbik: - Update maintainers. Niklas Schnelle takes over zpci and Vineeth Vijayan common io code. - Extend cpuinfo to include topology information. - Add new extended counters for IBM z15 and sampling buffer allocation rework in perf code. - Add control over zeroing out memory during system restart. - CCA protected key block version 2 support and other fixes/improvements in crypto code. - Convert to new fallthrough; annotations. - Replace zero-length arrays with flexible-arrays. - QDIO debugfs and other small improvements. - Drop 2-level paging support optimization for compat tasks. Varios mm cleanups. - Remove broken and unused hibernate / power management support. - Remove fake numa support which does not bring any benefits. - Exclude offline CPUs from CPU topology masks to be more consistent with other architectures. - Prevent last branching instruction address leaking to userspace. - Other small various fixes and improvements all over the code. * tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (57 commits) s390/mm: cleanup init_new_context() callback s390/mm: cleanup virtual memory constants usage s390/mm: remove page table downgrade support s390/qdio: set qdio_irq->cdev at allocation time s390/qdio: remove unused function declarations s390/ccwgroup: remove pm support s390/ap: remove power management code from ap bus and drivers s390/zcrypt: use kvmalloc instead of kmalloc for 256k alloc s390/mm: cleanup arch_get_unmapped_area() and friends s390/ism: remove pm support s390/cio: use fallthrough; s390/vfio: use fallthrough; s390/zcrypt: use fallthrough; s390: use fallthrough; s390/cpum_sf: Fix wrong page count in error message s390/diag: fix display of diagnose call statistics s390/ap: Remove ap device suspend and resume callbacks s390/pci: Improve handling of unset UID s390/pci: Fix zpci_alloc_domain() over allocation s390/qdio: pass ISC as parameter to chsc_sadc() ...
2020-04-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+78
Pull kvm updates from Paolo Bonzini: "ARM: - GICv4.1 support - 32bit host removal PPC: - secure (encrypted) using under the Protected Execution Framework ultravisor s390: - allow disabling GISA (hardware interrupt injection) and protected VMs/ultravisor support. x86: - New dirty bitmap flag that sets all bits in the bitmap when dirty page logging is enabled; this is faster because it doesn't require bulk modification of the page tables. - Initial work on making nested SVM event injection more similar to VMX, and less buggy. - Various cleanups to MMU code (though the big ones and related optimizations were delayed to 5.8). Instead of using cr3 in function names which occasionally means eptp, KVM too has standardized on "pgd". - A large refactoring of CPUID features, which now use an array that parallels the core x86_features. - Some removal of pointer chasing from kvm_x86_ops, which will also be switched to static calls as soon as they are available. - New Tigerlake CPUID features. - More bugfixes, optimizations and cleanups. Generic: - selftests: cleanups, new MMU notifier stress test, steal-time test - CSV output for kvm_stat" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits) x86/kvm: fix a missing-prototypes "vmread_error" KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y KVM: VMX: Add a trampoline to fix VMREAD error handling KVM: SVM: Annotate svm_x86_ops as __initdata KVM: VMX: Annotate vmx_x86_ops as __initdata KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup() KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes KVM: VMX: Configure runtime hooks using vmx_x86_ops KVM: VMX: Move hardware_setup() definition below vmx_x86_ops KVM: x86: Move init-only kvm_x86_ops to separate struct KVM: Pass kvm_init()'s opaque param to additional arch funcs s390/gmap: return proper error code on ksm unsharing KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move() KVM: Fix out of range accesses to memslots KVM: X86: Micro-optimize IPI fastpath delay KVM: X86: Delay read msr data iff writes ICR MSR KVM: PPC: Book3S HV: Add a capability for enabling secure guests KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs ...
2020-04-02mm: allow VM_FAULT_RETRY for multiple timesPeter Xu1-4/+1
The idea comes from a discussion between Linus and Andrea [1]. Before this patch we only allow a page fault to retry once. We achieved this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing handle_mm_fault() the second time. This was majorly used to avoid unexpected starvation of the system by looping over forever to handle the page fault on a single page. However that should hardly happen, and after all for each code path to return a VM_FAULT_RETRY we'll first wait for a condition (during which time we should possibly yield the cpu) to happen before VM_FAULT_RETRY is really returned. This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY flag when we receive VM_FAULT_RETRY. It means that the page fault handler now can retry the page fault for multiple times if necessary without the need to generate another page fault event. Meanwhile we still keep the FAULT_FLAG_TRIED flag so page fault handler can still identify whether a page fault is the first attempt or not. Then we'll have these combinations of fault flags (only considering ALLOW_RETRY flag and TRIED flag): - ALLOW_RETRY and !TRIED: this means the page fault allows to retry, and this is the first try - ALLOW_RETRY and TRIED: this means the page fault allows to retry, and this is not the first try - !ALLOW_RETRY and !TRIED: this means the page fault does not allow to retry at all - !ALLOW_RETRY and TRIED: this is forbidden and should never be used In existing code we have multiple places that has taken special care of the first condition above by checking against (fault_flags & FAULT_FLAG_ALLOW_RETRY). This patch introduces a simple helper to detect the first retry of a page fault by checking against both (fault_flags & FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now even the 2nd try will have the ALLOW_RETRY set, then use that helper in all existing special paths. One example is in __lock_page_or_retry(), now we'll drop the mmap_sem only in the first attempt of page fault and we'll keep it in follow up retries, so old locking behavior will be retained. This will be a nice enhancement for current code [2] at the same time a supporting material for the future userfaultfd-writeprotect work, since in that work there will always be an explicit userfault writeprotect retry for protected pages, and if that cannot resolve the page fault (e.g., when userfaultfd-writeprotect is used in conjunction with swapped pages) then we'll possibly need a 3rd retry of the page fault. It might also benefit other potential users who will have similar requirement like userfault write-protection. GUP code is not touched yet and will be covered in follow up patch. Please read the thread below for more information. [1] https://lore.kernel.org/lkml/20171102193644.GB22686@redhat.com/ [2] https://lore.kernel.org/lkml/20181230154648.GB9832@redhat.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Brian Geffon <bgeffon@google.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Matthew Wilcox <willy@infradead.org> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Link: http://lkml.kernel.org/r/20200220160246.9790-1-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02mm: introduce FAULT_FLAG_DEFAULTPeter Xu1-1/+1
Although there're tons of arch-specific page fault handlers, most of them are still sharing the same initial value of the page fault flags. Say, merely all of the page fault handlers would allow the fault to be retried, and they also allow the fault to respond to SIGKILL. Let's define a default value for the fault flags to replace those initial page fault flags that were copied over. With this, it'll be far easier to introduce new fault flag that can be used by all the architectures instead of touching all the archs. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Brian Geffon <bgeffon@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Matthew Wilcox <willy@infradead.org> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Link: http://lkml.kernel.org/r/20200220160238.9694-1-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02mm: introduce fault_signal_pending()Peter Xu1-2/+1
For most architectures, we've got a quick path to detect fatal signal after a handle_mm_fault(). Introduce a helper for that quick path. It cleans the current codes a bit so we don't need to duplicate the same check across archs. More importantly, this will be an unified place that we handle the signal immediately right after an interrupted page fault, so it'll be much easier for us if we want to change the behavior of handling signals later on for all the archs. Note that currently only part of the archs are using this new helper, because some archs have their own way to handle signals. In the follow up patches, we'll try to apply this helper to all the rest of archs. Another note is that the "regs" parameter in the new helper is not used yet. It'll be used very soon. Now we kept it in this patch only to avoid touching all the archs again in the follow up patches. [peterx@redhat.com: fix sparse warnings] Link: http://lkml.kernel.org/r/20200311145921.GD479302@xz-x1 Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Brian Geffon <bgeffon@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Matthew Wilcox <willy@infradead.org> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Link: http://lkml.kernel.org/r/20200220155353.8676-4-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-25s390: use fallthrough;Joe Perches1-6/+5
Convert the various uses of fallthrough comments to fallthrough; Done via script Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe.com/ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-04s390/mm: mark private defines for vm_fault_t as suchChristian Borntraeger1-5/+5
This fixes several sparse warnings for fault.c: arch/s390/mm/fault.c:336:36: warning: restricted vm_fault_t degrades to integer arch/s390/mm/fault.c:573:23: warning: incorrect type in assignment (different base types) arch/s390/mm/fault.c:573:23: expected restricted vm_fault_t [usertype] fault arch/s390/mm/fault.c:573:23: got int Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-27s390/mm: add (non)secure page access exceptions handlersVasily Gorbik1-0/+78
Add exceptions handlers performing transparent transition of non-secure pages to secure (import) upon guest access and secure pages to non-secure (export) upon hypervisor access. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> [frankja@linux.ibm.com: adding checks for failures] Signed-off-by: Janosch Frank <frankja@linux.ibm.com> [imbrenda@linux.ibm.com: adding a check for gmap fault] Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-07-29s390/mm: add fallthrough annotationsHeiko Carstens1-0/+3
Commit a035d552a93b ("Makefile: Globally enable fall-through warning") enables fall-through warnings globally. Add missing annotations. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-16mm, kprobes: generalize and rename notify_page_fault() as kprobe_page_fault()Anshuman Khandual1-15/+1
Architectures which support kprobes have very similar boilerplate around calling kprobe_fault_handler(). Use a helper function in kprobes.h to unify them, based on the x86 code. This changes the behaviour for other architectures when preemption is enabled. Previously, they would have disabled preemption while calling the kprobe handler. However, preemption would be disabled if this fault was due to a kprobe, so we know the fault was not due to a kprobe handler and can simply return failure. This behaviour was introduced in commit a980c0ef9f6d ("x86/kprobes: Refactor kprobes_fault() like kprobe_exceptions_notify()") [anshuman.khandual@arm.com: export kprobe_fault_handler()] Link: http://lkml.kernel.org/r/1561133358-8876-1-git-send-email-anshuman.khandual@arm.com Link: http://lkml.kernel.org/r/1560420444-25737-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: James Hogan <jhogan@kernel.org> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-08Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds1-4/+2
Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...