aboutsummaryrefslogtreecommitdiffstats
path: root/arch/um/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-19um: Do not initialise statics to 0.Xin Gao4-4/+4
do not initialise statics to 0. Signed-off-by: Xin Gao <gaoxin@cdjrlc.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-09-19um: Improve panic notifiers consistency and orderingGuilherme G. Piccoli1-4/+3
Currently the panic notifiers from user mode linux don't follow the convention for most of the other notifiers present in the kernel (indentation, priority setting, numeric return). More important, the priorities could be improved, since it's a special case (userspace), hence we could run the notifiers earlier; user mode linux shouldn't care much with other panic notifiers but the ordering among the mconsole and arch notifier is important, given that the arch one effectively triggers a core dump. Fix that by running the mconsole notifier as the first panic notifier, followed by the architecture one (that coredumps). Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> V3: - No changes. V2: - Kept the notifier header to avoid implicit usage - thanks Johannes for the suggestion! Signed-off-by: Richard Weinberger <richard@nod.at>
2022-09-19um: remove unused reactivate_chan() declarationGaosheng Cui1-1/+0
All uses of reactivate_chan() were removed by commit 940b241d9050 ("um: Remove obsolete reenable_XX calls"), so remove the declaration, too. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-09-19um: mmaper: add __exit annotations to module exit funcsXiu Jianfeng1-1/+1
Add missing __exit annotations to module exit funcs. Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-09-19um: virt-pci: add __init/__exit annotations to module init/exit funcsXiu Jianfeng1-2/+2
Add missing __init/__exit annotations to module init/exit funcs. Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-09-19um: move from strlcpy with unused retval to strscpyWolfram Sang2-2/+2
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-09-19um: read multiple msg from virtio slave request fdBenjamin Beichler1-34/+37
If VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS is activated, the user mode linux virtio irq handler only read one msg from the corresponding socket. This creates issues, when the device emulation creates multiple call requests (e.g. for multiple virtqueues), as the socket buffer tend to fill up and the call requests are delayed. This creates a deadlock situation, when the device simulation blocks, because of sending a msg and the kernel side blocks because of synchronously waiting for an acknowledge of kick request. Actually inband notifications are meant to be used in combination with the time travel protocol, but it is not required, therefore this corner case needs to be handled. Anyways, in general it seems to be more natural to consume always all messages from a socket, instead of only a single one. Fixes: 2cd097ba8c05 ("um: virtio: Implement VHOST_USER_PROTOCOL_F_SLAVE_REQ") Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-08-16virtio: Revert "virtio: find_vqs() add arg sizes"Michael S. Tsirkin1-1/+1
This reverts commit a10fba0377145fccefea4dc4dd5915b7ed87e546: the proposed API isn't supported on all transports but no effort was made to address this. It might not be hard to fix if we want to: maybe just rename size to size_hint and make sure legacy transports ignore the hint. But it's not sure what the benefit is in any case, so let's drop it. Fixes: a10fba037714 ("virtio: find_vqs() add arg sizes") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20220816053602.173815-8-mst@redhat.com>
2022-08-12Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-1/+2
Pull virtio updates from Michael Tsirkin: - A huge patchset supporting vq resize using the new vq reset capability - Features, fixes, and cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits) vdpa/mlx5: Fix possible uninitialized return value vdpa_sim_blk: add support for discard and write-zeroes vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests vdpa_sim_blk: check if sector is 0 for commands other than read or write vdpa_sim: Implement suspend vdpa op vhost-vdpa: uAPI to suspend the device vhost-vdpa: introduce SUSPEND backend feature bit vdpa: Add suspend operation virtio-blk: Avoid use-after-free on suspend/resume virtio_vdpa: support the arg sizes of find_vqs() vhost-vdpa: Call ida_simple_remove() when failed vDPA: fix 'cast to restricted le16' warnings in vdpa.c vDPA: !FEATURES_OK should not block querying device config space vDPA/ifcvf: support userspace to query features and MQ of a management device vDPA/ifcvf: get_config_size should return a value no greater than dev implementation vhost scsi: Allow user to control num virtqueues vhost-scsi: Fix max number of virtqueues vdpa/mlx5: Support different address spaces for control and data vdpa/mlx5: Implement susupend virtqueue callback ...
2022-08-11virtio: find_vqs() add arg sizesXuan Zhuo1-1/+1
find_vqs() adds a new parameter sizes to specify the size of each vq vring. NULL as sizes means that all queues in find_vqs() use the maximum size. A value in the array is 0, which means that the corresponding queue uses the maximum size. In the split scenario, the meaning of size is the largest size, because it may be limited by memory, the virtio core will try a smaller size. And the size is power of 2. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-34-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio: record the maximum queue num supported by the device.Xuan Zhuo1-0/+1
virtio-net can display the maximum (supported by hardware) ring size in ethtool -g eth0. When the subsequent patch implements vring reset, it can judge whether the ring size passed by the driver is legal based on this. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-2-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-05Merge tag 'for-linus-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds2-28/+28
Pull UML updates from Richard Weinberger: - KASAN support for x86_64 - noreboot command line option, just like qemu's -no-reboot - Various fixes and cleanups * tag 'for-linus-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: include sys/types.h for size_t um: Replace to_phys() and to_virt() with less generic function names um: Add missing apply_returns() um: add "noreboot" command line option for PANIC_TIMEOUT=-1 setups um: include linux/stddef.h for __always_inline UML: add support for KASAN under x86_64 mm: Add PAGE_ALIGN_DOWN macro um: random: Don't initialise hwrng struct with zero um: remove unused mm_copy_segments um: remove unused variable um: Remove straying parenthesis um: x86: print RIP with symbol arch: um: Fix build for statically linked UML w/ constructors x86/um: Kconfig: Fix indentation um/drivers: Kconfig: Fix indentation um: Kconfig: Fix indentation
2022-07-17um: random: Don't initialise hwrng struct with zeroChristopher Obbard1-1/+1
Initialising the hwrng struct with zeros causes a compile-time sparse warning: $ ARCH=um make -j10 W=1 C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' ... CHECK arch/um/drivers/random.c arch/um/drivers/random.c:31:31: sparse: warning: Using plain integer as NULL pointer Fix the warning by not initialising the hwrng struct with zeros as it is initialised anyway during module init. Fixes: 72d3e093afae ("um: random: Register random as hwrng-core device") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christopher Obbard <chris.obbard@collabora.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-07-17um/drivers: Kconfig: Fix indentationJuerg Haefliger1-27/+27
The convention for indentation seems to be a single tab. Help text is further indented by an additional two whitespaces. Fix the lines that violate these rules. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-07-14um: Use enum req_op where appropriateBart Van Assche1-2/+2
Improve static type checking by using type enum req_op instead of int where appropriate. Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-21-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-28block: remove blk_cleanup_diskChristoph Hellwig1-2/+2
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-10um: virt-pci: set device ready in probe()Vincent Whitchurch1-1/+6
Call virtio_device_ready() to make this driver work after commit b4ec69d7e09 ("virtio: harden vring IRQ"), since the driver uses the virtqueues in the probe function. (The virtio core sets the device ready when probe returns.) Fixes: 8b4ec69d7e09 ("virtio: harden vring IRQ") Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Message-Id: <20220610151203.3492541-1-vincent.whitchurch@axis.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Johannes Berg <johannes@sipsolutions.net>
2022-06-03Merge tag 'for-linus-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds11-38/+70
Pull UML updates from Richard Weinberger: - Various cleanups and fixes: xterm, serial line, time travel - Set ARCH_HAS_GCOV_PROFILE_ALL * tag 'for-linus-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Fix out-of-bounds read in LDT setup um: chan_user: Fix winch_tramp() return value um: virtio_uml: Fix broken device handling in time-travel um: line: Use separate IRQs per line um: Enable ARCH_HAS_GCOV_PROFILE_ALL um: Use asm-generic/dma-mapping.h um: daemon: Make default socket configurable um: xterm: Make default terminal emulator configurable
2022-05-27um: chan_user: Fix winch_tramp() return valueJohannes Berg1-4/+5
The previous fix here was only partially correct, it did result in returning a proper error value in case of error, but it also clobbered the pid that we need to return from this function (not just zero for success). As a result, it returned 0 here, but later this is treated as a pid and used to kill the process, but since it's now 0 we kill(0, SIGKILL), which makes UML kill itself rather than just the helper thread. Fix that and make it more obvious by using a separate variable for the pid. Fixes: ccf1236ecac4 ("um: fix error return code in winch_tramp()") Reported-and-tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at>
2022-05-27um: virtio_uml: Fix broken device handling in time-travelJohannes Berg1-10/+23
If a device implementation crashes, virtio_uml will mark it as dead by calling virtio_break_device() and scheduling the work that will remove it. This still seems like the right thing to do, but it's done directly while reading the message, and if time-travel is used, this is in the time-travel handler, outside of the normal Linux machinery. Therefore, we cannot acquire locks or do normal "linux-y" things because e.g. lockdep will be confused about the context. Move handling this situation out of the read function and into the actual IRQ handler and response handling instead, so that in the case of time-travel we don't call it in the wrong context. Chances are the system will still crash immediately, since the device implementation crashing may also cause the time- travel controller to go down, but at least all of that now happens without strange warnings from lockdep. Fixes: c8177aba37ca ("um: time-travel: rework interrupt handling in ext mode") Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-05-27um: line: Use separate IRQs per lineJohannes Berg5-20/+20
Today, all possible serial lines (ssl*=) as well as all possible consoles (con*=) each share a single interrupt (with a fixed number) with others of the same type. Now, if you have two lines, say ssl0 and ssl1, and one of them is connected to an fd you cannot read (e.g. a file), but the other gets a read interrupt, then both of them get the interrupt since it's shared. Then, the read() call will return EOF, since it's a file being written and there's nothing to read (at least not at the current offset, at the end). Unfortunately, this is treated as a read error, and we close this line, losing all the possible output. It might be possible to work around this and make the IRQ sharing work, however, now that we have dynamically allocated IRQs that are easy to use, simply use that to achieve separating between the events; then there's no interrupt for that line and we never attempt the read in the first place, thus not closing the line. This manifested itself in the wifi hostap/hwsim tests where the parallel script communicates via one serial console and the kernel messages go to another (a file) and sending data on the communication console caused the kernel messages to stop flowing into the file. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: anton ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-05-27um: daemon: Make default socket configurableJohannes Berg2-1/+9
Even if daemon network is deprecated, some configurations may still use it (e.g. Debian), and not want to default to the /tmp/uml.ctl socket location. Allow configuring the default socket location. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-by: Ritesh Raj Sarraf <ritesh@collabora.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-05-27um: xterm: Make default terminal emulator configurableJohannes Berg3-3/+13
Make the default terminal emulator configurable so e.g. Debian can set it to x-terminal-emulator instead of the current default of xterm. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-by: Ritesh Raj Sarraf <ritesh@collabora.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-05-25Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds1-1/+2
Pull networking updates from Jakub Kicinski: "Core ---- - Support TCPv6 segmentation offload with super-segments larger than 64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP). - Generalize skb freeing deferral to per-cpu lists, instead of per-socket lists. - Add a netdev statistic for packets dropped due to L2 address mismatch (rx_otherhost_dropped). - Continue work annotating skb drop reasons. - Accept alternative netdev names (ALT_IFNAME) in more netlink requests. - Add VLAN support for AF_PACKET SOCK_RAW GSO. - Allow receiving skb mark from the socket as a cmsg. - Enable memcg accounting for veth queues, sysctl tables and IPv6. BPF --- - Add libbpf support for User Statically-Defined Tracing (USDTs). - Speed up symbol resolution for kprobes multi-link attachments. - Support storing typed pointers to referenced and unreferenced objects in BPF maps. - Add support for BPF link iterator. - Introduce access to remote CPU map elements in BPF per-cpu map. - Allow middle-of-the-road settings for the kernel.unprivileged_bpf_disabled sysctl. - Implement basic types of dynamic pointers e.g. to allow for dynamically sized ringbuf reservations without extra memory copies. Protocols --------- - Retire port only listening_hash table, add a second bind table hashed by port and address. Avoid linear list walk when binding to very popular ports (e.g. 443). - Add bridge FDB bulk flush filtering support allowing user space to remove all FDB entries matching a condition. - Introduce accept_unsolicited_na sysctl for IPv6 to implement router-side changes for RFC9131. - Support for MPTCP path manager in user space. - Add MPTCP support for fallback to regular TCP for connections that have never connected additional subflows or transmitted out-of-sequence data (partial support for RFC8684 fallback). - Avoid races in MPTCP-level window tracking, stabilize and improve throughput. - Support lockless operation of GRE tunnels with seq numbers enabled. - WiFi support for host based BSS color collision detection. - Add support for SO_TXTIME/SCM_TXTIME on CAN sockets. - Support transmission w/o flow control in CAN ISOTP (ISO 15765-2). - Support zero-copy Tx with TLS 1.2 crypto offload (sendfile). - Allow matching on the number of VLAN tags via tc-flower. - Add tracepoint for tcp_set_ca_state(). Driver API ---------- - Improve error reporting from classifier and action offload. - Add support for listing line cards in switches (devlink). - Add helpers for reporting page pool statistics with ethtool -S. - Add support for reading clock cycles when using PTP virtual clocks, instead of having the driver convert to time before reporting. This makes it possible to report time from different vclocks. - Support configuring low-latency Tx descriptor push via ethtool. - Separate Clause 22 and Clause 45 MDIO accesses more explicitly. New hardware / drivers ---------------------- - Ethernet: - Marvell's Octeon NIC PCI Endpoint support (octeon_ep) - Sunplus SP7021 SoC (sp7021_emac) - Add support for Renesas RZ/V2M (in ravb) - Add support for MediaTek mt7986 switches (in mtk_eth_soc) - Ethernet PHYs: - ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting) - TI DP83TD510 PHY - Microchip LAN8742/LAN88xx PHYs - WiFi: - Driver for pureLiFi X, XL, XC devices (plfxlc) - Driver for Silicon Labs devices (wfx) - Support for WCN6750 (in ath11k) - Support Realtek 8852ce devices (in rtw89) - Mobile: - MediaTek T700 modems (Intel 5G 5000 M.2 cards) - CAN: - ctucanfd: add support for CTU CAN FD open-source IP core from Czech Technical University in Prague Drivers ------- - Delete a number of old drivers still using virt_to_bus(). - Ethernet NICs: - intel: support TSO on tunnels MPLS - broadcom: support multi-buffer XDP - nfp: support VF rate limiting - sfc: use hardware tx timestamps for more than PTP - mlx5: multi-port eswitch support - hyper-v: add support for XDP_REDIRECT - atlantic: XDP support (including multi-buffer) - macb: improve real-time perf by deferring Tx processing to NAPI - High-speed Ethernet switches: - mlxsw: implement basic line card information querying - prestera: add support for traffic policing on ingress and egress - Embedded Ethernet switches: - lan966x: add support for packet DMA (FDMA) - lan966x: add support for PTP programmable pins - ti: cpsw_new: enable bc/mc storm prevention - Qualcomm 802.11ax WiFi (ath11k): - Wake-on-WLAN support for QCA6390 and WCN6855 - device recovery (firmware restart) support - support setting Specific Absorption Rate (SAR) for WCN6855 - read country code from SMBIOS for WCN6855/QCA6390 - enable keep-alive during WoWLAN suspend - implement remain-on-channel support - MediaTek WiFi (mt76): - support Wireless Ethernet Dispatch offloading packet movement between the Ethernet switch and WiFi interfaces - non-standard VHT MCS10-11 support - mt7921 AP mode support - mt7921 IPv6 NS offload support - Ethernet PHYs: - micrel: ksz9031/ksz9131: cabletest support - lan87xx: SQI support for T1 PHYs - lan937x: add interrupt support for link detection" * tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits) ptp: ocp: Add firmware header checks ptp: ocp: fix PPS source selector debugfs reporting ptp: ocp: add .init function for sma_op vector ptp: ocp: vectorize the sma accessor functions ptp: ocp: constify selectors ptp: ocp: parameterize input/output sma selectors ptp: ocp: revise firmware display ptp: ocp: add Celestica timecard PCI ids ptp: ocp: Remove #ifdefs around PCI IDs ptp: ocp: 32-bit fixups for pci start address Revert "net/smc: fix listen processing for SMC-Rv2" ath6kl: Use cc-disable-warning to disable -Wdangling-pointer selftests/bpf: Dynptr tests bpf: Add dynptr data slices bpf: Add bpf_dynptr_read and bpf_dynptr_write bpf: Dynptr support for ring buffers bpf: Add bpf_dynptr_from_mem for local dynptrs bpf: Add verifier support for dynptrs bpf: Suppress 'passing zero to PTR_ERR' warning bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack ...
2022-05-08um: vector: switch to netif_napi_add_weight()Jakub Kicinski1-1/+2
UM's netdev driver uses a custom napi weight, switch to the new API for setting custom weight. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-03ubd: don't set the discard_alignment queue limitChristoph Hellwig1-1/+0
The discard_alignment queue limit is named a bit misleading means the offset into the block device at which the discard granularity starts. Setting it to the discard granularity as done by ubd is mostly harmless but also useless. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220418045314.360785-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-17block: remove QUEUE_FLAG_DISCARDChristoph Hellwig1-2/+0
Just use a non-zero max_discard_sectors as an indicator for discard support, similar to what is done for write zeroes. The only places where needs special attention is the RAID5 driver, which must clear discard support for security reasons by default, even if the default stacking rules would allow for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd] Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390] Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: David Sterba <dsterba@suse.com> [btrfs] Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-11um: port_user: Improve error handling when port-helper is not foundGlenn Washburn1-0/+12
Check if port-helper exists and is executable. If not, write an error message to the kernel log with information to help the user diagnose the issue and exit with an error. If UML_PORT_HELPER was not set, write a message suggesting that the user set it. This makes it easier to understand why telneting to the UML instance is failing and what can be done to fix it. Signed-off-by: Glenn Washburn <development@efficientek.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-03-11um: port_user: Allow setting path to port-helper using UML_PORT_HELPER envvarGlenn Washburn1-0/+4
This is useful when the uml-utilities user-space package has not been installed by the administrator and an unprivileged user wants to be able to telnet into a UML instance. The user can install the port-helper binary to a writable path and set UML_PORT_HELPER. Fallback to using hardcoded path to port-helper if environment variable is not set. Signed-off-by: Glenn Washburn <development@efficientek.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-03-11um: port_user: Search for in.telnetd in PATHGlenn Washburn1-1/+1
This allows in.telnetd to be run from non-standard installation locations and is especially useful when running a UML instance as an unprivileged user on a system where the administrator has not installed the in.telnetd binary. Signed-off-by: Glenn Washburn <development@efficientek.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-03-11um: Fix uml_mconsole stop/goAnton Ivanov1-1/+2
Moving to an EPOLL based IRQ controller broke uml_mconsole stop/go commands. This fixes it and restores stop/go functionality. Fixes: ff6a17989c08 ("Epoll based IRQ controller") Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-03-11uml: net: vector: fix const issueJohannes Berg2-2/+2
Since the constification of MAC addresses, the argument to uml_vector_default_bpf() must be const. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: anton ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-03-11um: Fix WRITE_ZEROES in the UBD DriverFrédéric Danis1-1/+7
Call to fallocate with FALLOC_FL_PUNCH_HOLE on a device backed by a sparse file can end up by missing data, zeroes data range, if the underlying file is used with a tool like bmaptool which will referenced only used spaces. Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-03-11um: Migrate vector drivers to NAPIAnton Ivanov2-57/+51
Migrate UML vector drivers from a bespoke scheduling mechanism to NAPI. Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-01-18Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-1/+1
Pull virtio updates from Michael Tsirkin: "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes. - partial support for < MAX_ORDER - 1 granularity for virtio-mem - driver_override for vdpa - sysfs ABI documentation for vdpa - multiqueue config support for mlx5 vdpa - and misc fixes, cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits) vdpa/mlx5: Fix tracking of current number of VQs vdpa/mlx5: Fix is_index_valid() to refer to features vdpa: Protect vdpa reset with cf_mutex vdpa: Avoid taking cf_mutex lock on get status vdpa/vdpa_sim_net: Report max device capabilities vdpa: Use BIT_ULL for bit operations vdpa/vdpa_sim: Configure max supported virtqueues vdpa/mlx5: Report max device capabilities vdpa: Support reporting max device capabilities vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps() vdpa: Add support for returning device configuration information vdpa/mlx5: Support configuring max data virtqueue vdpa/mlx5: Fix config_attr_mask assignment vdpa: Allow to configure max data virtqueues vdpa: Read device configuration only if FEATURES_OK vdpa: Sync calls set/get config/status with cf_mutex vdpa/mlx5: Distribute RX virtqueues in RQT object vdpa: Provide interface to read driver features vdpa: clean up get_config_size ret value handling virtio_ring: mark ring unused on error ...
2022-01-14virtio: wrap config->reset callsMichael S. Tsirkin1-1/+1
This will enable cleanups down the road. The idea is to disable cbs, then add "flush_queued_cbs" callback as a parameter, this way drivers can flush any work queued after callbacks have been disabled. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-11Merge tag 'for-linus-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds2-7/+55
Pull UML updates from Richard Weinberger: - set_fs removal - Devicetree support - Many cleanups from Al - Various virtio and build related fixes * tag 'for-linus-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (31 commits) um: virtio_uml: Allow probing from devicetree um: Add devicetree support um: Extract load file helper from initrd.c um: remove set_fs hostfs: Fix writeback of dirty pages um: Use swap() to make code cleaner um: header debriding - sigio.h um: header debriding - os.h um: header debriding - net_*.h um: header debriding - mem_user.h um: header debriding - activate_ipi() um: common-offsets.h debriding... um, x86: bury crypto_tfm_ctx_offset um: unexport handle_page_fault() um: remove a dangling extern of syscall_trace() um: kill unused cpu() uml/i386: missing include in barrier.h um: stop polluting the namespace with registers.h contents logic_io instance of iounmap() needs volatile on argument um: move amd64 variant of mmap(2) to arch/x86/um/syscalls_64.c ...
2021-12-22um: virtio_uml: Allow probing from devicetreeVincent Whitchurch1-3/+47
Allow the virtio_uml device to be probed from the devicetree so that sub-devices can be specified using the standard virtio bindings, for example: virtio@1 { compatible = "virtio,uml"; socket-path = "i2c.sock"; virtio-device-id = <0x22>; i2c-controller { compatible = "virtio,device22"; #address-cells = <0x01>; #size-cells = <0x00>; light-sensor@01 { compatible = "ti,opt3001"; reg = <0x01>; }; }; }; Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-12-21um: virtio_uml: Fix time-travel external time propagationJohannes Berg1-0/+4
When creating an external event, the current time needs to be propagated to other participants of a simulation. This is done in the places here where we kick a virtq etc. However, it must be done for _all_ external events, and that includes making the initial socket connection and later closing it. Call time_travel_propagate_time() to do this before making or closing the socket connection. Apparently, at least for the initial connection creation, due to the remote side in my use cases using microseconds (rather than nanoseconds), this wasn't a problem yet; only started failing between 5.14-rc1 and 5.15-rc1 (didn't test others much), or possibly depending on the configuration, where more delays happen before the virtio devices are initialized. Fixes: 88ce64249233 ("um: Implement time-travel=ext") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-12-21um: virt-pci: Fix 32-bit compileJohannes Berg1-4/+4
There were a few 32-bit compile warnings that of course turned into errors with -Werror, fix the 32-bit build. Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen1-1/+3
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-02Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds1-1/+2
Pull networking updates from Jakub Kicinski: "Core: - Remove socket skb caches - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and avoid memory accounting overhead on each message sent - Introduce managed neighbor entries - added by control plane and resolved by the kernel for use in acceleration paths (BPF / XDP right now, HW offload users will benefit as well) - Make neighbor eviction on link down controllable by userspace to work around WiFi networks with bad roaming implementations - vrf: Rework interaction with netfilter/conntrack - fq_codel: implement L4S style ce_threshold_ect1 marking - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap() BPF: - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging as implemented in LLVM14 - Introduce bpf_get_branch_snapshot() to capture Last Branch Records - Implement variadic trace_printk helper - Add a new Bloomfilter map type - Track <8-byte scalar spill and refill - Access hw timestamp through BPF's __sk_buff - Disallow unprivileged BPF by default - Document BPF licensing Netfilter: - Introduce egress hook for looking at raw outgoing packets - Allow matching on and modifying inner headers / payload data - Add NFT_META_IFTYPE to match on the interface type either from ingress or egress Protocols: - Multi-Path TCP: - increase default max additional subflows to 2 - rework forward memory allocation - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS - MCTP flow support allowing lower layer drivers to configure msg muxing as needed - Automatic Multicast Tunneling (AMT) driver based on RFC7450 - HSR support the redbox supervision frames (IEC-62439-3:2018) - Support for the ip6ip6 encapsulation of IOAM - Netlink interface for CAN-FD's Transmitter Delay Compensation - Support SMC-Rv2 eliminating the current same-subnet restriction, by exploiting the UDP encapsulation feature of RoCE adapters - TLS: add SM4 GCM/CCM crypto support - Bluetooth: initial support for link quality and audio/codec offload Driver APIs: - Add a batched interface for RX buffer allocation in AF_XDP buffer pool - ethtool: Add ability to control transceiver modules' power mode - phy: Introduce supported interfaces bitmap to express MAC capabilities and simplify PHY code - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks New drivers: - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89) - Ethernet driver for ASIX AX88796C SPI device (x88796c) Drivers: - Broadcom PHYs - support 72165, 7712 16nm PHYs - support IDDQ-SR for additional power savings - PHY support for QCA8081, QCA9561 PHYs - NXP DPAA2: support for IRQ coalescing - NXP Ethernet (enetc): support for software TCP segmentation - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of Gigabit-capable IP found on RZ/G2L SoC - Intel 100G Ethernet - support for eswitch offload of TC/OvS flow API, including offload of GRE, VxLAN, Geneve tunneling - support application device queues - ability to assign Rx and Tx queues to application threads - PTP and PPS (pulse-per-second) extensions - Broadcom Ethernet (bnxt) - devlink health reporting and device reload extensions - Mellanox Ethernet (mlx5) - offload macvlan interfaces - support HW offload of TC rules involving OVS internal ports - support HW-GRO and header/data split - support application device queues - Marvell OcteonTx2: - add XDP support for PF - add PTP support for VF - Qualcomm Ethernet switch (qca8k): support for QCA8328 - Realtek Ethernet DSA switch (rtl8366rb) - support bridge offload - support STP, fast aging, disabling address learning - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch - Mellanox Ethernet/IB switch (mlxsw) - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping) - offload root TBF qdisc as port shaper - support multiple routing interface MAC address prefixes - support for IP-in-IP with IPv6 underlay - MediaTek WiFi (mt76) - mt7921 - ASPM, 6GHz, SDIO and testmode support - mt7915 - LED and TWT support - Qualcomm WiFi (ath11k) - include channel rx and tx time in survey dump statistics - support for 80P80 and 160 MHz bandwidths - support channel 2 in 6 GHz band - spectral scan support for QCN9074 - support for rx decapsulation offload (data frames in 802.3 format) - Qualcomm phone SoC WiFi (wcn36xx) - enable Idle Mode Power Save (IMPS) to reduce power consumption during idle - Bluetooth driver support for MediaTek MT7922 and MT7921 - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and Realtek 8822C/8852A - Microsoft vNIC driver (mana) - support hibernation and kexec - Google vNIC driver (gve) - support for jumbo frames - implement Rx page reuse Refactor: - Make all writes to netdev->dev_addr go thru helpers, so that we can add this address to the address rbtree and handle the updates - Various TCP cleanups and optimizations including improvements to CPU cache use - Simplify the gnet_stats, Qdisc stats' handling and remove qdisc->running sequence counter - Driver changes and API updates to address devlink locking deficiencies" * tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits) Revert "net: avoid double accounting for pure zerocopy skbs" selftests: net: add arp_ndisc_evict_nocarrier net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter net: arp: introduce arp_evict_nocarrier sysctl parameter libbpf: Deprecate AF_XDP support kbuild: Unify options for BTF generation for vmlinux and modules selftests/bpf: Add a testcase for 64-bit bounds propagation issue. bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit. bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off. net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c net: avoid double accounting for pure zerocopy skbs tcp: rename sk_wmem_free_skb netdevsim: fix uninit value in nsim_drv_configure_vfs() selftests/bpf: Fix also no-alu32 strobemeta selftest bpf: Add missing map_delete_elem method to bloom filter map selftests/bpf: Add bloom map success test for userspace calls bpf: Add alignment padding for "map_extra" + consolidate holes bpf: Bloom filter map naming fixups selftests/bpf: Add test cases for struct_ops prog bpf: Add dummy BPF STRUCT_OPS for test purpose ...
2021-10-29net: um: use eth_hw_addr_set()Jakub Kicinski1-1/+2
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21um/drivers/ubd_kern: add error handling support for add_disk()Luis Chamberlain1-4/+9
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. ubd_disk_register() never returned an error, so just fix that now and let the caller handle the error condition. Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211015233028.2167651-8-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: drop unused includes in <linux/genhd.h>Christoph Hellwig1-0/+1
Drop various include not actually used in genhd.h itself, and move the remaning includes closer together. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-09Merge tag 'for-linus-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds2-29/+84
Pull UML updates from Richard Weinberger: - Support for VMAP_STACK - Support for splice_write in hostfs - Fixes for virt-pci - Fixes for virtio_uml - Various fixes * tag 'for-linus-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: fix stub location calculation um: virt-pci: fix uapi documentation um: enable VMAP_STACK um: virt-pci: don't do DMA from stack hostfs: support splice_write um: virtio_uml: fix memory leak on init failures um: virtio_uml: include linux/virtio-uml.h lib/logic_iomem: fix sparse warnings um: make PCI emulation driver init/exit static
2021-09-03Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds2-0/+2
Pull Kbuild updates from Masahiro Yamada: - Add -s option (strict mode) to merge_config.sh to make it fail when any symbol is redefined. - Show a warning if a different compiler is used for building external modules. - Infer --target from ARCH for CC=clang to let you cross-compile the kernel without CROSS_COMPILE. - Make the integrated assembler default (LLVM_IAS=1) for CC=clang. - Add <linux/stdarg.h> to the kernel source instead of borrowing <stdarg.h> from the compiler. - Add Nick Desaulniers as a Kbuild reviewer. - Drop stale cc-option tests. - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG to handle symbols in inline assembly. - Show a warning if 'FORCE' is missing for if_changed rules. - Various cleanups * tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kbuild: redo fake deps at include/ksym/*.h kbuild: clean up objtool_args slightly modpost: get the *.mod file path more simply checkkconfigsymbols.py: Fix the '--ignore' option kbuild: merge vmlinux_link() between ARCH=um and other architectures kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh kbuild: merge vmlinux_link() between the ordinary link and Clang LTO kbuild: remove stale *.symversions kbuild: remove unused quiet_cmd_update_lto_symversions gen_compile_commands: extract compiler command from a series of commands x86: remove cc-option-yn test for -mtune= arc: replace cc-option-yn uses with cc-option s390: replace cc-option-yn uses with cc-option ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild sparc: move the install rule to arch/sparc/Makefile security: remove unneeded subdir-$(CONFIG_...) kbuild: sh: remove unused install script kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y kbuild: Switch to 'f' variants of integrated assembler flag kbuild: Shuffle blank line to improve comment meaning ...
2021-09-01Merge tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds1-6/+7
Pull tty / serial updates from Greg KH: "Here is the "big" set of tty/serial driver patches for 5.15-rc1 Nothing major in here at all, just some driver updates and more cleanups on old tty apis and code that needed it that includes: - tty.h cleanup of things that didn't belong in it - other tty cleanups by Jiri - driver cleanups - rs485 support added to amba-pl011 driver - dts updates - stm32 serial driver updates - other minor fixes and driver updates All have been in linux-next for a while with no reported problems" * tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits) tty: serial: uartlite: Use read_poll_timeout for a polling loop tty: serial: uartlite: Use constants in early_uartlite_putc tty: Fix data race between tiocsti() and flush_to_ldisc() serial: vt8500: Use of_device_get_match_data serial: tegra: Use of_device_get_match_data serial: 8250_ingenic: Use of_device_get_match_data tty: serial: linflexuart: Remove redundant check to simplify the code tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp tty: serial: fsl_lpuart: enable two stop bits for lpuart32 tty: serial: fsl_lpuart: fix the wrong mapbase value mxser: use semi-colons instead of commas tty: moxa: use semi-colons instead of commas tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback tty: replace in_irq() with in_hardirq() serial: sh-sci: fix break handling for sysrq serial: stm32: use devm_platform_get_and_ioremap_resource() serial: stm32: use the defined variable to simplify code Revert "arm pl011 serial: support multi-irq request" tty: serial: samsung: Add Exynos850 SoC data tty: serial: samsung: Fix driver data macros style ...
2021-08-31Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds1-2/+6
Pull networking updates from Jakub Kicinski: "Core: - Enable memcg accounting for various networking objects. BPF: - Introduce bpf timers. - Add perf link and opaque bpf_cookie which the program can read out again, to be used in libbpf-based USDT library. - Add bpf_task_pt_regs() helper to access user space pt_regs in kprobes, to help user space stack unwinding. - Add support for UNIX sockets for BPF sockmap. - Extend BPF iterator support for UNIX domain sockets. - Allow BPF TCP congestion control progs and bpf iterators to call bpf_setsockopt(), e.g. to switch to another congestion control algorithm. Protocols: - Support IOAM Pre-allocated Trace with IPv6. - Support Management Component Transport Protocol. - bridge: multicast: add vlan support. - netfilter: add hooks for the SRv6 lightweight tunnel driver. - tcp: - enable mid-stream window clamping (by user space or BPF) - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD - more accurate DSACK processing for RACK-TLP - mptcp: - add full mesh path manager option - add partial support for MP_FAIL - improve use of backup subflows - optimize option processing - af_unix: add OOB notification support. - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the router. - mac80211: Target Wake Time support in AP mode. - can: j1939: extend UAPI to notify about RX status. Driver APIs: - Add page frag support in page pool API. - Many improvements to the DSA (distributed switch) APIs. - ethtool: extend IRQ coalesce uAPI with timer reset modes. - devlink: control which auxiliary devices are created. - Support CAN PHYs via the generic PHY subsystem. - Proper cross-chip support for tag_8021q. - Allow TX forwarding for the software bridge data path to be offloaded to capable devices. Drivers: - veth: more flexible channels number configuration. - openvswitch: introduce per-cpu upcall dispatch. - Add internet mix (IMIX) mode to pktgen. - Transparently handle XDP operations in the bonding driver. - Add LiteETH network driver. - Renesas (ravb): - support Gigabit Ethernet IP - NXP Ethernet switch (sja1105): - fast aging support - support for "H" switch topologies - traffic termination for ports under VLAN-aware bridge - Intel 1G Ethernet - support getcrosststamp() with PCIe PTM (Precision Time Measurement) for better time sync - support Credit-Based Shaper (CBS) offload, enabling HW traffic prioritization and bandwidth reservation - Broadcom Ethernet (bnxt) - support pulse-per-second output - support larger Rx rings - Mellanox Ethernet (mlx5) - support ethtool RSS contexts and MQPRIO channel mode - support LAG offload with bridging - support devlink rate limit API - support packet sampling on tunnels - Huawei Ethernet (hns3): - basic devlink support - add extended IRQ coalescing support - report extended link state - Netronome Ethernet (nfp): - add conntrack offload support - Broadcom WiFi (brcmfmac): - add WPA3 Personal with FT to supported cipher suites - support 43752 SDIO device - Intel WiFi (iwlwifi): - support scanning hidden 6GHz networks - support for a new hardware family (Bz) - Xen pv driver: - harden netfront against malicious backends - Qualcomm mobile - ipa: refactor power management and enable automatic suspend - mhi: move MBIM to WWAN subsystem interfaces Refactor: - Ambient BPF run context and cgroup storage cleanup. - Compat rework for ndo_ioctl. Old code removal: - prism54 remove the obsoleted driver, deprecated by the p54 driver. - wan: remove sbni/granch driver" * tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits) net: Add depends on OF_NET for LiteX's LiteETH ipv6: seg6: remove duplicated include net: hns3: remove unnecessary spaces net: hns3: add some required spaces net: hns3: clean up a type mismatch warning net: hns3: refine function hns3_set_default_feature() ipv6: remove duplicated 'net/lwtunnel.h' include net: w5100: check return value after calling platform_get_resource() net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource() net: mdio-ipq4019: Make use of devm_platform_ioremap_resource() fou: remove sparse errors ipv4: fix endianness issue in inet_rtm_getroute_build_skb() octeontx2-af: Set proper errorcode for IPv4 checksum errors octeontx2-af: Fix static code analyzer reported issues octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg octeontx2-af: Fix loop in free and unmap counter af_unix: fix potential NULL deref in unix_dgram_connect() dpaa2-eth: Replace strlcpy with strscpy octeontx2-af: Use NDC TX for transmit packet data ...
2021-08-27um: vector: adjust to coalesce API changesJohannes Berg1-2/+6
The API changes were propagated to most drivers, but clearly arch/um/drivers/ was missed, perhaps due to looking only at the drivers/ folder. Fix that. Fixes: f3ccfda19319 ("ethtool: extend coalesce setting uAPI with CQE mode") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20210827094759.f3ab06684bd0.I985181cc00fe017cfe6413d9e1bb720cbe852e6d@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.