aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/i915_reg.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-04-20drm/i915: Fix DISP_POS_Y and DISP_HEIGHT definesHans de Goede1-2/+2
Commit 428cb15d5b00 ("drm/i915: Clean up pre-skl primary plane registers") introduced DISP_POS_Y and DISP_HEIGHT defines but accidentally set these their masks to REG_GENMASK(31, 0) instead of REG_GENMASK(31, 16). This breaks the primary display pane on at least pineview machines, fix the mask to fix the primary display pane only showing black. Tested on an Acer One AO532h with an Intel N450 SoC. Fixes: 428cb15d5b00 ("drm/i915: Clean up pre-skl primary plane registers") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220418150936.5499-1-hdegoede@redhat.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2022-04-12Merge drm/drm-next into drm-intel-gt-nextJoonas Lahtinen1-0/+1
Pull in TTM changes needed for DG2 CCS enabling from Ram. Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2022-04-11Merge drm/drm-next into drm-intel-nextJani Nikula1-6/+18
Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb ("drm/i915/xehpsdv: Add has_flat_ccs to device info"). Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-04-06drm/i915/adlp: Fix register corruption after DDI clock enablingImre Deak1-0/+1
Accessing the DDI_BUF_CTL register without the port's DDI clock being enabled (to set/clear the TypeC PHY ownership for the port) can lead to a corrupted value read during any i915 register access right after the DDI clock is enabled. The root cause is the way clock synchronization works for this register, controlled by the CHICKEN_DCPR_1 DDI_CLOCK_REG_ACCESS flag. Correctly this flag should be cleared on ADLP (see the Bspec link below), however after bootup the flag is set. One easily reproducible issue is an unclaimed register access of the PWR_WELL_CTL_DDI2 register, programmed right after DDI clock enabling to enable the port's DDI_IO power well (see the HSDES, VLK links below). With the correct setting above this problem can't be reproduced. Bspec: 49189 HSDES: 18019028154 VLK: 28328, 28655 Cc: Jouni Högander <jouni.hogander@intel.com> Cc: Arthur J Runyan <arthur.j.runyan@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Acked-by: Arthur J Runyan <arthur.j.runyan@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220323201749.288566-1-imre.deak@intel.com
2022-04-01drm/i915/dmc: split out dmc registers to a separate fileJani Nikula1-21/+0
Clean up the massive i915_reg.h a bit with this isolated set of registers. v2: Remove stale comment (Lucas) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220330113417.220964-3-jani.nikula@intel.com
2022-03-30drm/i915/display/tgl+: Set default values for all registers in PIPE_MBUS_DBOX_CTLJosé Roberto de Souza1-10/+15
MBUS_DBOX_B2B_TRANSACTIONS_MAX, MBUS_DBOX_B2B_TRANSACTIONS_DELAY and MBUS_DBOX_REGULATE_B2B_TRANSACTIONS_EN were being programmed with zeros while specification has different default values for this registers in display 12 and newer. While at it also converting all MBUS_DBOX macros to use REG_* macros. BSpec: 50343 BSpec: 20231 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220330155724.255226-1-jose.souza@intel.com
2022-03-24Merge tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-4737/+569
Pull drm updates from Dave Airlie: "Lots of work all over, Intel improving DG2 support, amdkfd CRIU support, msm new hw support, and faster fbdev support. dma-buf: - rename dma-buf-map to iosys-map core: - move buddy allocator to core - add pci/platform init macros - improve EDID parser deep color handling - EDID timing type 7 support - add GPD Win Max quirk - add yes/no helpers to string_helpers - flatten syncobj chains - add nomodeset support to lots of drivers - improve fb-helper clipping support - add default property value interface fbdev: - improve fbdev ops speed ttm: - add a backpointer from ttm bo->ttm resource dp: - move displayport headers - add a dp helper module bridge: - anx7625 atomic support, HDCP support panel: - split out panel-lvds and lvds bindings - find panels in OF subnodes privacy: - add chromeos privacy screen support fb: - hot unplug fw fb on forced removal simpledrm: - request region instead of marking ioresource busy - add panel oreintation property udmabuf: - fix oops with 0 pages amdgpu: - power management code cleanup - Enable freesync video mode by default - RAS code cleanup - Improve VRAM access for debug using SDMA - SR-IOV rework special register access and fixes - profiling power state request ioctl - expose IP discovery via sysfs - Cyan skillfish updates - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates - expose benchmark tests via debugfs - add module param to disable XGMI for testing - GPU reset debugfs register dumping support amdkfd: - CRIU support - SDMA queue fixes radeon: - UVD suspend fix - iMac backlight fix i915: - minimal parallel submission for execlists - DG2-G12 subplatform added - DG2 programming workarounds - DG2 accelerated migration support - flat CCS and CCS engine support for XeHP - initial small BAR support - drop fake LMEM support - ADL-N PCH support - bigjoiner updates - introduce VMA resources and async unbinding - register definitions cleanups - multi-FBC refactoring - DG1 OPROM over SPI support - ADL-N platform enabling - opregion mailbox #5 support - DP MST ESI improvements - drm device based logging - async flip optimisation for DG2 - CPU arch abstraction fixes - improve GuC ADS init to work on aarch64 - tweak TTM LRU priority hint - GuC 69.0.3 support - remove short term execbuf pins nouveau: - higher DP/eDP bitrates - backlight fixes msm: - dpu + dp support for sc8180x - dp support for sm8350 - dpu + dsi support for qcm2290 - 10nm dsi phy tuning support - bridge support for dp encoder - gpu support for additional 7c3 SKUs ingenic: - HDMI support for JZ4780 - aux channel EDID support ast: - AST2600 support - add wide screen support - create DP/DVI connectors omapdrm: - fix implicit dma_buf fencing vc4: - add CSC + full range support - better display firmware handoff panfrost: - add initial dual-core GPU support stm: - new revision support - fb handover support mediatek: - transfer display binding document to yaml format. - add mt8195 display device binding. - allow commands to be sent during video mode. - add wait_for_event for crtc disable by cmdq. tegra: - YUV format support rcar-du: - LVDS support for M3-W+ (R8A77961) exynos: - BGR pixel format for FIMD device" * tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits) drm/i915/display: Do not re-enable PSR after it was marked as not reliable drm/i915/display: Fix HPD short pulse handling for eDP drm/amdgpu: Use drm_mode_copy() drm/radeon: Use drm_mode_copy() drm/amdgpu: Use ternary operator in `vcn_v1_0_start()` drm/amdgpu: Remove pointless on stack mode copies drm/amd/pm: fix indenting in __smu_cmn_reg_print_error() drm/amdgpu/dc: fix typos in comments drm/amdgpu: fix typos in comments drm/amd/pm: fix typos in comments drm/amdgpu: Add stolen reserved memory for MI25 SRIOV. drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations. drm/amdkfd: evict svm bo worker handle error drm/amdgpu/vcn: fix vcn ring test failure in igt reload test drm/amdgpu: only allow secure submission on rings which support that drm/amdgpu: fixed the warnings reported by kernel test robot drm/amd/display: 3.2.177 drm/amd/display: [FW Promotion] Release 0.0.108.0 drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2 drm/amd/display: Wait for hubp read line for Pollock ...
2022-03-21drm/i915/gt: Add sysfs throttle frequency interfacesSujaritha Sundaresan1-0/+11
Throttling here refers to the GT frequency being clipped. Each of the throttle reason attributes will have a 0 or 1 value depending upon whether there is throttling and also the specific reason for it. The following is a brief description of the sysfs throttle frequency attributes added: - throttle_reason_status: when set indicates that there is GT frequency clipping. - throttle_reason_pl1: when set indicates that PBM PL1 (platform or package PL1) has caused GT frequency clipping. - throttle_reason_pl2: when set indicates that PBM PL2 or PL3 (platform or package PL2 or PL3) has caused GT frequency clipping. - throttle_reason_pl4: when set indicates that PL4 or IccMax has caused GT frequency clipping. - throttle_reason_thermal: when set indicates that Thermal event has caused GT frequency clipping. - throttle_reason_prochot: when set indicates that PROCHOT# has caused GT frequency clipping. - throttle_reason_ratl: when set indicates that Running Average Thermal Limit has caused GT frequency clipping. - throttle_reason_vr_thermalert: when set indicates that Hot VR (any processor VR) has caused GT frequency clipping. - throttle_reason_vr_tdc: when set indicates that VR TDC (Thermal Design Current) has caused GT frequency clipping. Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Dale B Stimson <dale.b.stimson@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220318233938.149744-8-andi.shyti@linux.intel.com
2022-03-18drm/i915: Rename QGV request/response bitsVille Syrjälä1-6/+12
Name all the ICL_PCODE_SAGV_DE_MEM_SS_CONFIG request/response bits in a manner that we can actually understand what they're doing. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-9-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2022-03-18drm/i915: Unconfuses QGV vs. PSF point masksVille Syrjälä1-1/+2
Use separate bitmasks for QGV vs. PSF GV points during the computation. Makes the whole thing a lot less confusing. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-8-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2022-03-16drm/i915/stolen: don't treat small BAR as an errorAkeem G Abodunrin1-0/+3
On client platforms with reduced LMEM BAR, we should be able to continue with driver load with reduced io_size. Instead of using the BAR size to determine the how large stolen should be, we should instead use the ADDR_RANGE register to figure this out(at least on platforms like DG2). For simplicity we don't attempt to support partially mappable stolen. v2: rearrange the io_mapping_init_wc slightly, since the stolen setup might result in reduced io_size. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Co-developed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220315181425.576828-2-matthew.auld@intel.com
2022-03-10drm/i915: Rename PIPECONF refresh select bitsVille Syrjälä1-2/+2
Rename the PIPECONF refresh rate select bits to be less cryptic. Also nothing eDP specific about these as they also select between FP0 vs. FP1 for the DPLL and thus can be used to change the refresh rate on other output types as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220310004802.16310-9-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-10drm/i915: Program MSA timing delay on ilk/snb/ivbVille Syrjälä1-0/+2
Grab the DRRS MSA timing delay value from the VBT and program things accordingly. Only ilk/snb/ivb have this so presumably on hsw+ we don't need it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220310004802.16310-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-10drm/i915: Clean up bxt/glk PLL registersVille Syrjälä1-31/+31
Use REG_BIT() & co. for bxt/glk PLL registers. v2: Reorder a few bits for consistency Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220307233940.4161-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-07drm/i915/psr: Set "SF Partial Frame Enable" also on full updateJouni Högander1-0/+1
Currently we are observing occasional screen flickering when PSR2 selective fetch is enabled. More specifically glitch seems to happen on full frame update when cursor moves to coords x = -1 or y = -1. According to Bspec SF Single full frame should not be set if SF Partial Frame Enable is not set. This happened to be true for ADLP as PSR2_MAN_TRK_CTL_ENABLE is always set and for ADL_P it's actually "SF Partial Frame Enable" (Bit 31). Setting "SF Partial Frame Enable" bit also on full update seems to fix screen flickering. Also make code more clear by setting PSR2_MAN_TRK_CTL_ENABLE only if not on ADL_P. Bit 31 has different meaning in ADL_P. Bspec: 49274 v2: Fix Mihai Harpau email address v3: Modify commit message and remove unnecessary comment Tested-by: Lyude Paul <lyude@redhat.com> Fixes: 7f6002e58025 ("drm/i915/display: Enable PSR2 selective fetch by default") Reported-by: Lyude Paul <lyude@redhat.com> Cc: Mihai Harpau <mharpau@gmail.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/5077 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220225070228.855138-1-jouni.hogander@intel.com (cherry picked from commit 8d5516d18b323cf7274d1cf5fe76f4a691f879c6) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-03-03drm/i915/psr: Set "SF Partial Frame Enable" also on full updateJouni Högander1-0/+1
Currently we are observing occasional screen flickering when PSR2 selective fetch is enabled. More specifically glitch seems to happen on full frame update when cursor moves to coords x = -1 or y = -1. According to Bspec SF Single full frame should not be set if SF Partial Frame Enable is not set. This happened to be true for ADLP as PSR2_MAN_TRK_CTL_ENABLE is always set and for ADL_P it's actually "SF Partial Frame Enable" (Bit 31). Setting "SF Partial Frame Enable" bit also on full update seems to fix screen flickering. Also make code more clear by setting PSR2_MAN_TRK_CTL_ENABLE only if not on ADL_P. Bit 31 has different meaning in ADL_P. Bspec: 49274 v2: Fix Mihai Harpau email address v3: Modify commit message and remove unnecessary comment Tested-by: Lyude Paul <lyude@redhat.com> Fixes: 7f6002e58025 ("drm/i915/display: Enable PSR2 selective fetch by default") Reported-by: Lyude Paul <lyude@redhat.com> Cc: Mihai Harpau <mharpau@gmail.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/5077 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220225070228.855138-1-jouni.hogander@intel.com
2022-03-02drm/i915/xehp: Define compute class and engineMatt Roper1-0/+4
Introduce a Compute Command Streamer (CCS), which has access to the media and GPGPU pipelines (but not the 3D pipeline). To begin with, define the compute class/engine common functions, based on the existing render ones. v2: - Add kerneldoc for drm_i915_gem_engine_class since we're adding a new element to it. (Daniel) - Make engine class <-> guc class converters use lookup tables to make it more clear/explicit how the IDs map. (Tvrtko) v3: - Don't update uapi for now; we'll just include the driver-internal changes for the time being. Bspec: 46167, 45544 Original-author: Michel Thierry Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-2-matthew.d.roper@intel.com
2022-02-25Merge drm/drm-next into drm-intel-gt-nextTvrtko Ursulin1-4737/+559
Matt needed some buddy allocator changes for landing DG2 small BAR support patches. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-02-24drm/i915/dg2: Tile 4 plane format supportStanislav Lisovskiy1-0/+1
Tile4 in bspec format is 4K tile organized into 64B subtiles with same basic shape as for legacy TileY which will be supported by Display13. v2: - Moved Tile4 associating struct for modifier/display to the beginning(Imre Deak) - Removed unneeded case I915_FORMAT_MOD_4_TILED modifier checks(Imre Deak) - Fixed I915_FORMAT_MOD_4_TILED to be 9 instead of 12 (Imre Deak) v3: - Rebased patch on top of new changes related to plane_caps. - Added static assert to check that PLANE_CTL_TILING_YF matches PLANE_CTL_TILING_4(Nanley Chery) - Fixed naming and layout description for Tile 4 in drm uapi header(Nanley Chery) v4: - Extracted drm_fourcc changes to separate patch(Nanley Chery) Reviewed-by: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220118115544.15116-3-stanislav.lisovskiy@intel.com
2022-02-23Merge tag 'drm-intel-gt-next-2022-02-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-nextRodrigo Vivi1-0/+4
UAPI Changes: - Weak parallel submission support for execlists Minimal implementation of the parallel submission support for execlists backend that was previously only implemented for GuC. Support one sibling non-virtual engine. Core Changes: - Two backmerges of drm/drm-next for header file renames/changes and i915_regs reorganization Driver Changes: - Add new DG2 subplatform: DG2-G12 (Matt R) - Add new DG2 workarounds (Matt R, Ram, Bruce) - Handle pre-programmed WOPCM registers for DG2+ (Daniele) - Update guc shim control programming on XeHP SDV+ (Daniele) - Add RPL-S C0/D0 stepping information (Anusha) - Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas) - Fix KMD and GuC race on accessing PMU busyness (Umesh) - Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh) - Report error on invalid reset notification from GuC (John) - Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston) - Fixes to parallel submission implementation (Matt B.) - Improve GuC loading status check/error reports (John) - Tweak TTM LRU priority hint selection (Matt A.) - Align the plane_vma to min_page_size of stolen mem (Ram) - Introduce vma resources and implement async unbinding (Thomas) - Use struct vma_resource instead of struct vma_snapshot (Thomas) - Return some TTM accel move errors instead of trying memcpy move (Thomas) - Fix a race between vma / object destruction and unbinding (Thomas) - Remove short-term pins from execbuf (Maarten) - Update to GuC version 69.0.3 (John, Michal Wa.) - Improvements to GT reset paths in GuC backend (Matt B.) - Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko) - Use trylock instead of blocking lock when freeing GEM objects (Maarten) - Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.) - Fixes to object unmapping and purging (Matt A) - Check for wedged device in GuC backend (John) - Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten) - Allow dead vm to unbind vma's without lock (Maarten) - s/engine->i915/i915/ for DG2 engine workarounds (Matt R) - Use to_gt() helper for GGTT accesses (Michal Wi.) - Selftest improvements (Matt B., Thomas, Ram) - Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan) From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch from drm-rerere's 1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip rerere cache update")]
2022-02-23drm/i915/tgl: Simply subplatform detectionJosé Roberto de Souza1-6/+0
In the past we had a need to differentiate TGL U and TGL Y, there was a different voltage swing table for each subplatform and some PCI ids of this subplatforms are shared but it turned out that it was a specification mistake and the voltage swing table was indeed the same but we went ahead with that patch because we needed to differentiate TGL U and Y from TGL H and by that time TGL H was embargoed so that was the perfect way to land it upstream. Now the embargo for TGL H is long past and now we even have INTEL_TGL_12_GT1_IDS with all TGL H ids, so we can drop this PCI root check and only rely in the PCI ids to differentiate TGL U and Y from TGL H that actually has code differences. Besides the simplification this will fix issues in virtualization environments where the PCI root is virtualized and don't have the same id as actual hardware. v2: - add and set INTEL_SUBPLATFORM_UY Cc: Fred Gao <fred.gao@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Tested-by: Yu He <yu.he@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220222141424.35165-1-jose.souza@intel.com
2022-02-21drm/i915/adlp: Add TypeC PHY TBT->DP-alt/legacy mode switch workaroundImre Deak1-0/+6
Add display workaround # 1309179469 , which fixes a PHY hang when switching from TBT mode to DP-alt/legacy mode. The workaround also requires an IFWI/PHY firmware change, before that this change has no effect (the DKL_PCS_DW5/SOFTRESET flag is always cleared). HSDES: 18018237866 HSDES: 16014473319 Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220218122611.767974-1-imre.deak@intel.com
2022-02-21drm/i915/reg: split out icl_dsi_regs.hJani Nikula1-333/+0
The ICL DSI registers have fairly isolated usage. Split the register macros to a separate file. Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-4-jani.nikula@intel.com
2022-02-21drm/i915/reg: split out vlv_dsi_regs.h and vlv_dsi_pll_regs.hJani Nikula1-574/+0
The VLV (including CHV, BXT, and GLK) DSI registers have fairly isolated usage. Split the register macros to separated files. Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-3-jani.nikula@intel.com
2022-02-21drm/i915/dsi: add separate init timer mask definition for ICL DSIJani Nikula1-0/+1
Having a separate definition will be useful for splitting VLV and ICL register files. Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-2-jani.nikula@intel.com
2022-02-19drm/i915/lmem: Enable lmem for platforms with Flat CCSAbdiel Janulgue1-0/+3
A portion of device memory is reserved for Flat CCS so usable device memory will be reduced by size of Flat CCS. Size of Flat CCS is specified in “XEHPSDV_FLAT_CCS_BASE_ADDR”. So to get effective device memory we need to subtract total device memory by Flat CCS memory size. v2: Addressed the small bar related issue [Matt] Removed a reduntant check [Matt] v3: removed a variable s/DRM_ERROR/drm_err [Lucas] Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220218184752.7524-15-ramalingam.c@intel.com
2022-02-18drm/i915/dg2: Enable 5th portMatt Roper1-0/+1
DG2 supports a 5th display output which the hardware refers to as "TC1," even though it isn't a Type-C output. This behaves similarly to the TC1 on past platforms with just a couple minor differences: * DG2's TC1 bit in SDEISR is at bit 25 rather than 24 as it is on ICP/TGP/ADP. * DG2 doesn't need the hpd inversion setting that we had to use on DG1 v2: intel_ddi_init(dev_priv, PORT_TC1); [Matt] Cc: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220218010328.183423-3-lucas.demarchi@intel.com
2022-02-18drm/i915: Fix for PHY_MISC_TC1 offsetJouni Högander1-2/+4
Currently ICL_PHY_MISC macro is returning offset 0x64C10 for PHY_E. The PORT_TC1 port is not yet enabled properly in the driver, but intel_phy_snps.c is relying on intel_phy_is_snps() to filter out unavailable phys. That function was already considering the last phy as available. Just correct the offset of the last phy to 0x64C14 as the rest of the support for it is coming on next commits. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220218010328.183423-1-lucas.demarchi@intel.com
2022-02-18drm/i915/display: Implement Wa_16013835468José Roberto de Souza1-5/+8
PSR2 workaround required when mode has delayed vblank. BSpec: 52890 BSpec: 49421 Cc: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220210185223.95399-2-jose.souza@intel.com
2022-02-18drm/i915/display/tgl+: Implement new PLL programming stepJosé Roberto de Souza1-0/+12
A new programming step was added to combo and TC PLL sequences. If override_AFC_startup is set in VBT, driver should overwrite AFC_startup value to 0x0 or 0x7 in PLL's div0 register. The current understating is that only TGL needs this and all other display 12 and newer platforms will have a older VBT or a newer VBT with override_AFC_startup set to 0 but in any case there is a drm_warn_on_once() to let us know if this is not true. v2: - specification updated, now AFC can be override to 0x0 or 0x7 - not using a union for div0 (Imre) - following previous wrong vbt naming: bits instead of bytes (Imre) BSpec: 49204 BSpec: 20122 BSpec: 49968 BSpec: 71360 Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220216134059.25348-1-jose.souza@intel.com
2022-02-18drm/i915: Polish ilk+ wm register bitsVille Syrjälä1-21/+20
Use REG_GENMASK() & co. for ilk+ watermark registers. v2: Stick to the current bitmask sizes (Jani) Fix "watermarm" typo (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220216232806.6194-4-ville.syrjala@linux.intel.com
2022-02-18drm/i915: Clean up SSKPD/MLTR definesVille Syrjälä1-8/+0
Give names to the SSKPD/MLTR fields, and use the REG_GENMASK* and REG_FIELD_GET*. Also drop the bogus non-mirrored SSKP register define. v2: Rebase due to intel_mchbar_regs.h Leave gen6_check_mch_setup() in place for the moment Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220216232806.6194-3-ville.syrjala@linux.intel.com
2022-02-16drm/i915: Move MCHBAR registers to their own headerMatt Roper1-203/+0
Registers that exist within the MCH BAR and are mirrored into the GPU's MMIO space are a good candidate to separate out into their own header. For reference, the mirror of the MCH BAR starts at the following locations in the graphics MMIO space (the end of the MCHBAR range differs slightly on each platform): * Pre-gen6: 0x10000 * Gen6-Gen11 + RKL: 0x140000 v2: - Create separate patch to swtich a few register definitions to be relative to the MCHBAR mirror base. - Drop upper bound of MCHBAR mirror from commit message; there are too many different combinations between various platforms to list out, and the documentation is spotty for the older pre-gen6 platforms anyway. Bspec: 134, 51771 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220215061342.2055952-2-matthew.d.roper@intel.com
2022-02-16drm/i915: Define MCH registers relative to MCHBAR_MIRROR_BASEMatt Roper1-6/+6
A few of our MCH registers are defined with absolute register offsets. For consistency, let's switch their definitions to be relative offsets from MCHBAR_MIRROR_BASE. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220215061342.2055952-1-matthew.d.roper@intel.com
2022-02-14drm/i915/dg1: Update DMC_DEBUG3 registerChuansheng Liu1-1/+2
Current DMC_DEBUG3(_MMIO(0x101090)) address is for TGL, it is wrong for DG1. Just like commit 5bcc95ca382e ("drm/i915/dg1: Update DMC_DEBUG register"), correct this issue for DG1 platform to avoid wrong register being read. BSpec: 49788 v2: fix "not wrong" typo. (Jani) Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220211002933.84240-1-chuansheng.liu@intel.com
2022-02-11drm/i915/dg2: Add Wa_22011450934Ramalingam C1-0/+4
An indirect ctx wabb is implemented as per Wa_22011450934 to avoid rcs restore hang during context restore of a preempted context in GPGPU mode Signed-off-by: Ramalingam C <ramalingam.c@intel.com> cc: Chris Wilson <chris.p.wilson@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220128185209.18077-2-ramalingam.c@intel.com
2022-02-03Merge drm/drm-next into drm-intel-gt-nextJoonas Lahtinen1-2/+17
Backmerge to bring in 5.17-rc2 to introduce a common baseline to merge i915_regs changes from drm-intel-next. Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2022-02-02drm/i915: Move [more] GT registers to their own header fileMatt Roper1-125/+0
A couple hunks didn't get applied while resolving the conflicts on commit 0d6419e9c855 ("drm/i915: Move GT registers to their own header file"). Add the second half of the patch as a follow-up commit. Fixes: 0d6419e9c855 ("drm/i915: Move GT registers to their own header file") Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-6-matthew.d.roper@intel.com
2022-02-02drm/i915: Only include i915_reg.h from .c filesMatt Roper1-3/+0
Several of our i915 header files, have been including i915_reg.h. This means that any change to i915_reg.h will trigger a full rebuild of pretty much every file of the driver, even those that don't have any kind of register access. Let's delete the i915_reg.h include from all headers and add an explicit include from the .c files that truly need the register definitions; those that need a definition of i915_reg_t for a function definition can get it from i915_reg_defs.h instead. We also remove two non-register #define's (VLV_DISPLAY_BASE and GEN12_SFC_DONE_MAX) into i915_reg_defs.h to allow us to drop the i915_reg.h include from a couple of headers. There's probably a lot more header dependency optimization possible, but the changes here roughly cut the number of files compiled after 'touch i915_reg.h' in half --- a good first step. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-7-matthew.d.roper@intel.com
2022-02-02drm/i915: Move GT registers to their own header fileMatt Roper1-1426/+0
This is a huge, chaotic mass of registers copied over as-is without any real cleanup. We'll come back and organize these better, align on consistent coding style, remove dead code, etc. in separate patches later that will be easier to review. v2: - Add missing include in intel_pxp_irq.c v3: - Correct a few indentation errors (Lucas) - Minor conflict resolution Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-6-matthew.d.roper@intel.com
2022-02-02drm/i915: Parameterize MI_PREDICATE registersMatt Roper1-10/+1
The various MI_PREDICATE registers have per-engine instances. Today we only utilize the RCS0 instance of each, but that will likely change in the future; switch to parameterized register definitions to make these easier to work with going forward. Of special note is MI_PREDICATE_RESULT_2; we only use it in one place in the driver today in HSW-specific code. It turns out that the bspec (page 94) lists two different offsets for this register on HSW; one is in the standard location shared by all other platforms (base + 0x3bc) and the other is an unusual location (0x2214). We're using the second, non-standard offset in i915 today; that offset doesn't exist on any other platforms (and it's not even 100% clear that it's correct for HSW) so I've renamed the current non-standard definition to HSW_MI_PREDICATE_RESULT_2; the new cross-platform parameterized macro (which is still unused at the moment) uses the standard offset. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-5-matthew.d.roper@intel.com
2022-02-02drm/i915: Parameterize R_PWR_CLK_STATE register definitionMatt Roper1-15/+0
At the moment we only use R_PWR_CLK_STATE in the context of the RCS engine, but upcoming support for compute engines will start using instances relative to the CCS engine base offsets. Let's parameterize the register and move it to the engine reg header. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-4-matthew.d.roper@intel.com
2022-02-02drm/i915/perf: Move OA regs to their own headerMatt Roper1-485/+0
The OA unit registers are only used by the perf code; move them to their own header file. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-2-matthew.d.roper@intel.com
2022-02-02drm/i915: remove VGA register definitionsJani Nikula1-41/+0
The only user of the VGA registers has switched to using the definitions in linux/vga.h, so these have become redundant. Remove them. Suggested-by: Matt Roper <matthew.d.roper@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220202112509.1886660-2-jani.nikula@intel.com
2022-01-31Merge drm/drm-next into drm-intel-nextRodrigo Vivi1-16/+155
Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next for a possible topic branch for merging the split of i915_regs... Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-01-31drm/i915/pmu: Use PM timestamp instead of RING TIMESTAMP for referenceUmesh Nerlige Ramappa1-1/+2
All timestamps returned by GuC for GuC PMU busyness are captured from GUC PM TIMESTAMP. Since this timestamp does not tick when GuC goes idle, kmd uses RING_TIMESTAMP to measure busyness of an engine with an active context. In further stress testing, the MMIO read of the RING_TIMESTAMP is seen to cause a rare hang. Resolve the issue by using gt specific timestamp from PM which is in sync with the GuC PM timestamp. Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220111015523.225562-1-umesh.nerlige.ramappa@intel.com (cherry picked from commit 721fd84ea1fe957453587efad5fdc44dfba58e04) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-01-28drm/i915/dg2: Add Wa_14015227452Matt Roper1-0/+1
Note that the bspec doesn't list the bit we're programming here (bit 11) as being present on DG2, but we've confirmed with the hardware team that this is a documentation mistake and the bit does indeed exist on all Xe_HP-based platforms. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220127194855.3963296-1-matthew.d.roper@intel.com Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
2022-01-28drm/i915: Clean up M/N register definesVille Syrjälä1-19/+3
Use REG_GENMASK() & co. for the M/N register values. There are also a lot of weird unused defines (eg. *_OFFSET) we can just throw out. Also let's mask out the unused bits during readout for good measure. Previously we only masked out the TU_SIZE from one of the registers, which was a bit too inconsistent for my taste. v2: Mention the readout masking in the commit msg (Jani) Deal wth gvt Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220127120219.20143-1-ville.syrjala@linux.intel.com
2022-01-26drm/i915: Clean up PIPESRC definesVille Syrjälä1-0/+4
Use REG_GENMASK() & co. when dealing with PIPESRC. Note that i9xx_get_initial_plane_config() will now use the full 16 bit mask whereas previously it used 12 bits only. But intel_get_pipe_src_size() already used the full 16 bits on all platforms anyway, so at least we're consistent now. The high bits beyond the max supported pipe source size should not be set in any case so this seems fine. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211112193813.8224-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-01-26drm/i915: Clean up PCH_TRANSCONF/TRANS_DP_CTL bit definesVille Syrjälä1-32/+26
Use REG_BIT & co. for PCH_TRANSCONF/TRANS_DP_CTL bits, and adjust the naming a some bits to be more consistent. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211112193813.8224-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.