aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-07net: hns3: add support to query and set lane number by ethtoolHao Chen1-1/+1
When serdes lane support setting 25Gb/s or 50Gb/s speed and user wants to set port speed as 50Gb/s, it can be setted as one 50Gb/s serdes lane or two 25Gb/s serdes lanes. So, this patch adds support to query and set lane number by ethtool to satisfy this scenario. Signed-off-by: Hao Chen <chenhao418@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-26net: hns3: fix phy can not link up when autoneg off and resetGuangbin Huang1-2/+2
Currently, function hclge_mdio_read() will return 0 if during reset(the cmd state will be set to disable). If use general phy driver, the phy_state_machine() will update phy speed every second in function genphy_read_status_fixed() when PHY is set to autoneg off, no matter of link down or link up. If phy driver happens to read BMCR register during reset, phy speed will be updated to 10Mpbs as BMCR register value is 0. So it may call phy can not link up if previous speed is not 10Mpbs. To fix this problem, function hclge_mdio_read() should return -EBUSY if the cmd state is disable. So does function hclge_mdio_write(). Fixes: 1c1249380992 ("net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31net: hns3: refactor hclge_cmd_send with new hclge_comm_cmd_send APIJie Wang1-2/+2
This patch firstly uses new hardware description struct hclge_comm_hw as child member of hclge_hw and deletes the original child memebers of hclge_hw. All the hclge_hw variables used in PF module is modified according to the new hclge_hw. Secondly hclge_cmd_send is refactored to use hclge_comm_cmd_send APIs. The old functions called by hclge_cmd_send are deleted and hclge_cmd_send is kept to avoid too many meaningless modifications. Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-30net: hns3: disable phy loopback setting in hclge_mac_start_phyYufeng Mo1-0/+2
If selftest and reset are performed at the same time, the phy loopback setting may be still in enable state after the reset, and device cannot link up. So fix this issue by disabling phy loopback before phy_start(). Fixes: 256727da7395 ("net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-13net: hns3: add ioctl support for imp-controlled PHYsGuangbin Huang1-0/+39
When the imp-controlled PHYs feature is enabled, driver will not register mdio bus. In order to support ioctl ops for phy tool to read or write phy register in this case, the firmware implement a new command for driver and driver implement ioctl by using this new command. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: fix a print format issue in hclge_mac_mdio_config()Huazhong Tan1-1/+1
Use %d to print int variable 'ret' in hclge_mac_mdio_config(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: cleanup some print format warningGuojia Liao1-1/+1
Using '%d' for printing type unsigned int or '%u' for type int would cause static tools to give false warnings, so this patch cleanups this warning by using the suitable format specifier of the type of variable. BTW, modifies the type of some variables and macro to synchronize with their usage. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18net: hns3: add phy_attached_info() to the hns3 driverYonglong Liu1-0/+2
This patch adds the call to phy_attached_info() to the hns3 driver to identify which exact PHY drivers and models is in use. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: add Asym Pause support to fix autoneg problemYonglong Liu1-0/+7
Local device and link partner config auto-negotiation on both, local device config pause frame use as: rx on/tx off, link partner config pause frame use as: rx off/tx on. We except the result is: Local device: Autonegotiate: on RX: on TX: off RX negotiated: on TX negotiated: off Link partner: Autonegotiate: on RX: off TX: on RX negotiated: off TX negotiated: on But actually, the result of Local device and link partner is both: Autonegotiate: on RX: off TX: off RX negotiated: off TX negotiated: off The root cause is that the supported flag is has only Pause, reference to the function genphy_config_advert(): static int genphy_config_advert(struct phy_device *phydev) { ... linkmode_and(phydev->advertising, phydev->advertising, phydev->supported); ... } The pause frame use of link partner is rx off/tx on, so its advertising only set the bit Asym_Pause, and the supported is only set the bit Pause, so the result of linkmode_and(), is rx off/tx off. This patch adds Asym_Pause to the supported flag to fix it. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: hns3: some variable modificationWeihang Li1-4/+4
This patch does following things: 1. add the keyword const before some variables which won't be modified in functions. 2. changes some variables from signed to unsigned to avoid bitwise operation on signed variables. 3. adds or removes initialization of some variables. 4. defines a new structure to help parsing mailbox messages instead of using an array which is harder to get the meaning of each element. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23net: phy: marvell: add new default led configure for m88e151xJian Shen1-0/+3
The default m88e151x LED configuration is 0x1177, used LED[0] for 1000M link, LED[1] for 100M link, and LED[2] for active. But for some boards, which use LED[0] for link, and LED[1] for active, prefer to be 0x1040. To be compatible with this case, this patch defines a new dev_flag, and set it before connect phy in HNS3 driver. When phy initializing, using the new LED configuration if this dev_flag is set. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-14net: hns3: do not initialize MDIO bus when PHY is inexistentJian Shen1-1/+7
For some cases, PHY may not be connected to MDIO bus, then the driver will initialize fail since MDIO bus initialization fails. This patch fixes it by skipping the MDIO bus initialization when PHY is inexistent. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: fix port info query issue for copper portJian Shen1-15/+2
In original codes, for copper port which doesn't connect to phy, it always returns -EOPNOTSUPP when query port information. This patch fixes it by return the port information of MAC. Fixes: 5f373b158523 ("net: hns3: Fix speed/duplex information loss problem when executing ethtool ethx cmd of VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: hns3: Fix NULL deref when unloading driverHuazhong Tan1-2/+6
When the driver is unloading, if there is a calling of ndo_open occurs between phy_disconnect() and unregister_netdev(), it will end up causing the kernel to eventually hit a NULL deref: [14942.417828] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048 [14942.529878] Mem abort info: [14942.551166] ESR = 0x96000006 [14942.567070] Exception class = DABT (current EL), IL = 32 bits [14942.623081] SET = 0, FnV = 0 [14942.639112] EA = 0, S1PTW = 0 [14942.643628] Data abort info: [14942.659227] ISV = 0, ISS = 0x00000006 [14942.674870] CM = 0, WnR = 0 [14942.679449] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000224ad6ad [14942.695595] [0000000000000048] pgd=00000021e6673003, pud=00000021dbf01003, pmd=0000000000000000 [14942.723163] Internal error: Oops: 96000006 [#1] PREEMPT SMP [14942.729358] Modules linked in: hns3(O) hclge(O) pv680_mii(O) hnae3(O) [last unloaded: hclge] [14942.738907] CPU: 1 PID: 26629 Comm: kworker/u4:13 Tainted: G O 4.18.0-rc1-12928-ga960791-dirty #145 [14942.749491] Hardware name: Huawei Technologies Co., Ltd. D05/D05, BIOS Hi1620 FPGA TB BOOT BIOS B763 08/17/2018 [14942.760392] Workqueue: events_power_efficient phy_state_machine [14942.766644] pstate: 80c00009 (Nzcv daif +PAN +UAO) [14942.771918] pc : test_and_set_bit+0x18/0x38 [14942.776589] lr : netif_carrier_off+0x24/0x70 [14942.781033] sp : ffff0000121abd20 [14942.784518] x29: ffff0000121abd20 x28: 0000000000000000 [14942.790208] x27: ffff0000164d3cd8 x26: ffff8021da68b7b8 [14942.795832] x25: 0000000000000000 x24: ffff8021eb407800 [14942.801445] x23: 0000000000000000 x22: 0000000000000000 [14942.807046] x21: 0000000000000001 x20: 0000000000000000 [14942.812672] x19: 0000000000000000 x18: ffff000009781708 [14942.818284] x17: 00000000004970e8 x16: ffff00000816ad48 [14942.823900] x15: 0000000000000000 x14: 0000000000000008 [14942.829528] x13: 0000000000000000 x12: 0000000000000f65 [14942.835149] x11: 0000000000000001 x10: 00000000000009d0 [14942.840753] x9 : ffff0000121abaa0 x8 : 0000000000000000 [14942.846360] x7 : ffff000009781708 x6 : 0000000000000003 [14942.851970] x5 : 0000000000000020 x4 : 0000000000000004 [14942.857575] x3 : 0000000000000002 x2 : 0000000000000001 [14942.863180] x1 : 0000000000000048 x0 : 0000000000000000 [14942.868875] Process kworker/u4:13 (pid: 26629, stack limit = 0x00000000c909dbf3) [14942.876464] Call trace: [14942.879200] test_and_set_bit+0x18/0x38 [14942.883376] phy_link_change+0x38/0x78 [14942.887378] phy_state_machine+0x3dc/0x4f8 [14942.891968] process_one_work+0x158/0x470 [14942.896223] worker_thread+0x50/0x470 [14942.900219] kthread+0x104/0x130 [14942.903905] ret_from_fork+0x10/0x1c [14942.907755] Code: d2800022 8b400c21 f9800031 9ac32044 (c85f7c22) [14942.914185] ---[ end trace 968c9e12eb740b23 ]--- So this patch fixes it by modifying the timing to do phy_connect_direct() and phy_disconnect(). Fixes: 256727da7395 ("net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: hns3: synchronize speed and duplex from phy when phy link upPeng Li1-0/+4
Driver calls phy_connect_direct and registers hclge_mac_adjust_link to synchronize mac speed and duplex from phy. It is better to synchronize mac speed and duplex from phy when phy link up. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: hns3: remove 1000M/half support of phyFuyun Liang1-1/+1
Our phy does not support 1000M/half, this patch removes 1000M/half from PHY_SUPPORTED_FEATURES. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: ethernet: Convert phydev advertize and supported from u32 to link modeAndrew Lunn1-2/+11
There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31net: hns3: bugfix for hclge_mdio_write and hclge_mdio_readHuazhong Tan1-2/+2
When there is a PHY, the driver needs to complete some operations through MDIO during reset reinitialization, so HCLGE_STATE_CMD_DISABLE is more suitable than HCLGE_STATE_RST_HANDLING to prevent the MDIO operation from being sent during the hardware reset. Fixes: b50ae26c57cb ("net: hns3: never send command queue message to IMP when reset) Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Add helper for MACs which support asym pauseAndrew Lunn1-3/+1
Rather than have the MAC drivers manipulate phydev members to indicate they support Asym Pause, add a helper function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Fix up drivers masking pause supportAndrew Lunn1-2/+2
PHY drivers don't indicate they support pause. They expect MAC drivers to enable its support if the MAC has the needed hardware. Thus MAC drivers should not mask Pause support, but enable it. Change a few ANDs to ORs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-14net: hns3: Fix for phy link issue when using marvell phy driverJian Shen1-0/+2
For marvell phy m88e1510, bit SUPPORTED_FIBRE of phydev->supported is default on. Both phy_resume() and phy_suspend() will check the SUPPORTED_FIBRE bit and write register of fibre page. Currently in hns3 driver, the SUPPORTED_FIBRE bit will be cleared after phy_connect_direct() finished. Because phy_resume() is called in phy_connect_direct(), and phy_suspend() is called when disconnect phy device, so the operation for fibre page register is not symmetrical. It will cause phy link issue when reload hns3 driver. This patch fixes it by disable the SUPPORTED_FIBRE before connecting phy. Fixes: 256727da7395 ("net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-14net: hns3: Fix for information of phydev lost problem when down/upFuyun Liang1-4/+21
Function call of phy_connect_direct will reinitialize phydev. Some information like advertising will be lost. Phy_connect_direct only needs to be called once. And driver can run well. This patch adds some functions to ensure that phy_connect_direct is called only once to solve the information of phydev lost problem occurring when we stop the net and open it again. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21net: hns3: Add SPDX tags to HNS3 PF driverJian Shen1-8/+2
Add the SPDX identifiers to HNS3 PF driver. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02net: hns3: modify hnae_ to hnae3_Peng Li1-19/+19
For consistency, prefix hnae_ should be modified to hnae3_. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-01net: hns3: fix for phy_addr error in hclge_mac_mdio_configHuazhong Tan1-2/+5
When phy exists, phy_addr must less than PHY_MAX_ADDR. If not, hclge_mac_mdio_config should return error. And for fiber(phy_addr=0xff), it does not need hclge_mac_mdio_config. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26net: hns3: never send command queue message to IMP when resetPeng Li1-0/+6
IMP will not handle and command queue message any more when it is in core/global, driver should not send command queue message to IMP until reinitialize the NIC HW. This patch checks the status and avoid the message sent to IMP when reset. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27net: hns3: add Asym Pause support to phy default featuresFuyun Liang1-0/+1
commit c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature initialization") adds default supported features for phy, but our hardware also supports Asym Pause. This patch adds Asym Pause support to phy default features to prevent Asym Pause can not be advertised when the phy negotiates flow control. Fixes: c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature initialization") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27net: hns3: add support to update flow control settings after autonegPeng Li1-0/+4
When auto-negotiation is enabled, the MAC flow control settings is based on the flow control negotiation result. And it should be configured after a valid link has been established. This patch adds support to update flow control settings after auto-negotiation has completed. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net: hns3: fix a bug for phy supported feature initializationFuyun Liang1-0/+10
This patch fixes a bug for phy supported feature initialization. Currently, the value of phydev->supported is initialized by kernel. So it includes many features that we do not support, such as SUPPORTED_FIBRE and SUPPORTED_BNC. This patch fixes it. Fixes: 256727d (net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC) Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30net: hns3: Fixes the wrong IS_ERR check on the returned phydev valueSalil Mehta1-1/+1
This patch removes the wrong check being done for the phy device being returned by the mdiobus_get_phy() function. This function never returns the error pointers. Fixes: 256727da7395 ("net: hns3: Add MDIO support to HNS3 Ethernet Driver for hip08 SoC") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoCSalil1-0/+213
This patch adds the support of MDIO bus interface for HNS3 driver. Code provides various interfaces to start and stop the PHY layer and to read and write the MDIO bus or PHY. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.