aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/realtek (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-09-14r8169: remove support for chip version RTL_GIGA_MAC_VER_27Heiner Kallweit3-99/+3
This patch is a follow-up to beb401ec5006 ("r8169: deprecate support for RTL_GIGA_MAC_VER_27") that came with 5.12. Nobody complained, so let's remove support for this chip version. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26r8169: add rtl_enable_exit_l1Heiner Kallweit1-11/+30
This adds a function for what has been magic register writes so far. It's based on recent changes to vendor drivers r8101, r8168, r8125, and deals with events that trigger an early ASPM L1 exit. Description of the bits has been kindly provided by Realtek. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo1-2/+8
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24r8169: enable ASPM L0s stateHeiner Kallweit1-3/+2
ASPM is disabled completely because we've seen different types of problems in the past. However it seems these problems occurred with L1 or L1 sub-states only. On all the chip versions I've seen the acceptable L0s exit latency is 512ns. This should be short enough not to cause problems. If the actual L0s exit latency of the PCIe link is bigger than 512ns then the PCI core will disable L0s anyway. So let's give it a try and disable L1 and L1 sub-states only. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23net: 8139cp: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-19/+12
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16r8169: rename rtl_csi_access_enable to rtl_set_aspm_entry_latencyHeiner Kallweit1-4/+7
Rename the function to reflect what it's doing. Also add a description of the register values as kindly provided by Realtek. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+4
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-07r8169: change the L0/L1 entrance latencies for RTL8106eHayes Wang1-0/+3
The original L0 and L1 entrance latencies of RTL8106e are 4us. And they cause the delay of link-up interrupt when enabling ASPM. Change the L0 entrance latency to 7us and L1 entrance latency to 32us. Then, they could avoid the issue. Tested-by: Koba Ko <koba.ko@canonical.com> Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-07Revert "r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM"Hayes Wang1-0/+1
This reverts commit 1ee8856de82faec9bc8bd0f2308a7f27e30ba207. This is used to re-enable ASPM on RTL8106e, if it is possible. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann3-3/+3
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21r8169: Avoid duplicate sysfs entry creation errorSayanta Pattanayak1-1/+2
When registering the MDIO bus for a r8169 device, we use the PCI bus/device specifier as a (seemingly) unique device identifier. However the very same BDF number can be used on another PCI segment, which makes the driver fail probing: [ 27.544136] r8169 0002:07:00.0: enabling device (0000 -> 0003) [ 27.559734] sysfs: cannot create duplicate filename '/class/mdio_bus/r8169-700' .... [ 27.684858] libphy: mii_bus r8169-700 failed to register [ 27.695602] r8169: probe of 0002:07:00.0 failed with error -22 Add the segment number to the device name to make it more unique. This fixes operation on ARM N1SDP boards, with two boards connected together to form an SMP system, and all on-board devices showing up twice, just on different PCI segments. A similar issue would occur on large systems with many PCI slots and multiple RTL8169 NICs. Fixes: f1e911d5d0dfd ("r8169: add basic phylib support") Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com> [Andre: expand commit message, use pci_domain_nr()] Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
Trivial conflicts in net/can/isotp.c and tools/testing/selftests/net/mptcp/mptcp_connect.sh scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c to include/linux/ptp_clock_kernel.h in -next so re-apply the fix there. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-16r8169: Avoid memcpy() over-reading of ETH_SS_STATSKees Cook1-1/+1
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally reading across neighboring array fields. The memcpy() is copying the entire structure, not just the first array. Adjust the source argument so the compiler can do appropriate bounds checking. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPMHeiner Kallweit1-1/+0
It has been reported that on RTL8106e the link-up interrupt may be significantly delayed if the user enables ASPM L1. Per default ASPM is disabled. The change leaves L1 enabled on the PCIe link (thus still allowing to reach higher package power saving states), but the NIC won't actively trigger it. Reported-by: Koba Ko <koba.ko@canonical.com> Tested-by: Koba Ko <koba.ko@canonical.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-28r8169: Fix fall-through warning for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20210528202327.GA39994@embeddedor Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-19net: realtek: remove leading spaces before tabsHui Tang3-8/+8
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17r8169: use KBUILD_MODNAME instead of own module name definitionHeiner Kallweit1-5/+3
Remove own module name definition and use KBUILD_MODNAME instead. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-05Merge tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-14/+0
Pull pci updates from Bjorn Helgaas: "Enumeration: - Release OF node when pci_scan_device() fails (Dmitry Baryshkov) - Add pci_disable_parity() (Bjorn Helgaas) - Disable Mellanox Tavor parity reporting (Heiner Kallweit) - Disable N2100 r8169 parity reporting (Heiner Kallweit) - Fix RCiEP device to RCEC association (Qiuxu Zhuo) - Convert sysfs "config", "rom", "reset", "label", "index", "acpi_index" to static attributes to help fix races in device enumeration (Krzysztof Wilczyński) - Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof Wilczyński) - Use sysfs_emit() in "show" functions (Krzysztof Wilczyński) - Remove unused alloc_pci_root_info() return value (Krzysztof Wilczyński) PCI device hotplug: - Fix acpiphp reference count leak (Feilong Lin) Power management: - Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki) - Fix runtime PM imbalance (Dinghao Liu) Virtualization: - Increase delay after FLR to work around Intel DC P4510 NVMe erratum (Raphael Norwitz) MSI: - Convert rcar, tegra, xilinx to MSI domains (Marc Zyngier) - For rcar, xilinx, use controller address as MSI doorbell (Marc Zyngier) - Remove unused hv msi_controller struct (Marc Zyngier) - Remove unused PCI core msi_controller support (Marc Zyngier) - Remove struct msi_controller altogether (Marc Zyngier) - Remove unused default_teardown_msi_irqs() (Marc Zyngier) - Let host bridges declare their reliance on MSI domains (Marc Zyngier) - Make pci_host_common_probe() declare its reliance on MSI domains (Marc Zyngier) - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner) - Document ways of ending up with NO_MSI (Marc Zyngier) - Refactor HT advertising of NO_MSI flag (Marc Zyngier) VPD: - Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner Kallweit) - Remove sysfs VPD size checking dead code (Heiner Kallweit) - Convert VPF sysfs file to static attribute (Heiner Kallweit) - Remove unnecessary pci_set_vpd_size() (Heiner Kallweit) - Tone down "missing VPD" message (Heiner Kallweit) Endpoint framework: - Fix NULL pointer dereference when epc_features not implemented (Shradha Todi) - Add missing destroy_workqueue() in endpoint test (Yang Yingliang) Amazon Annapurna Labs PCIe controller driver: - Fix compile testing without CONFIG_PCI_ECAM (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) APM X-Gene PCIe controller driver: - Fix cfg resource mapping regression (Dejin Zheng) Broadcom iProc PCIe controller driver: - Return zero for success of iproc_msi_irq_domain_alloc() (Pali Rohár) Broadcom STB PCIe controller driver: - Add reset_control_rearm() stub for !CONFIG_RESET_CONTROLLER (Jim Quinlan) - Fix use of BCM7216 reset controller (Jim Quinlan) - Use reset/rearm for Broadcom STB pulse reset instead of deassert/assert (Jim Quinlan) - Fix brcm_pcie_probe() error return for unsupported revision (Wei Yongjun) Cavium ThunderX PCIe controller driver: - Fix compile testing (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) Freescale Layerscape PCIe controller driver: - Fix ls_pcie_ep_probe() syntax error (comma for semicolon) (Krzysztof Wilczyński) - Remove layerscape-gen4 dependencies on OF and ARM64, add dependency on ARCH_LAYERSCAPE (Geert Uytterhoeven) HiSilicon HIP PCIe controller driver: - Remove obsolete HiSilicon PCIe DT description (Dongdong Liu) Intel Gateway PCIe controller driver: - Remove unused pcie_app_rd() (Jiapeng Chong) Intel VMD host bridge driver: - Program IRTE with Requester ID of VMD endpoint, not child device (Jon Derrick) - Disable VMD MSI-X remapping when possible so children can use more MSI-X vectors (Jon Derrick) MediaTek PCIe controller driver: - Configure FC and FTS for functions other than 0 (Ryder Lee) - Add YAML schema for MediaTek (Jianjun Wang) - Export pci_pio_to_address() for module use (Jianjun Wang) - Add MediaTek MT8192 PCIe controller driver (Jianjun Wang) - Add MediaTek MT8192 INTx support (Jianjun Wang) - Add MediaTek MT8192 MSI support (Jianjun Wang) - Add MediaTek MT8192 system power management support (Jianjun Wang) - Add missing MODULE_DEVICE_TABLE (Qiheng Lin) Microchip PolarFlare PCIe controller driver: - Make several symbols static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Add MCFG quirks for Tegra194 ECAM errata (Vidya Sagar) - Make several symbols const (Rikard Falkeborn) - Fix Kconfig host/endpoint typo (Wesley Sheng) SiFive FU740 PCIe controller driver: - Add pcie_aux clock to prci driver (Greentime Hu) - Use reset-simple in prci driver for PCIe (Greentime Hu) - Add SiFive FU740 PCIe host controller driver and DT binding (Paul Walmsley, Greentime Hu) Synopsys DesignWare PCIe controller driver: - Move MSI Receiver init to dw_pcie_host_init() so it is re-initialized along with the RC in resume (Jisheng Zhang) - Move iATU detection earlier to fix regression (Hou Zhiqiang) TI J721E PCIe driver: - Add DT binding and TI j721e support for refclk to PCIe connector (Kishon Vijay Abraham I) - Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon Vijay Abraham I) TI Keystone PCIe controller driver: - Use generic config accessors for TI AM65x (K3) to fix regression (Kishon Vijay Abraham I) Xilinx NWL PCIe controller driver: - Add support for coherent PCIe DMA traffic using CCI (Bharat Kumar Gogada) - Add optional "dma-coherent" DT property (Bharat Kumar Gogada) Miscellaneous: - Fix kernel-doc warnings (Krzysztof Wilczyński) - Remove unused MicroGate SyncLink device IDs (Jiri Slaby) - Remove redundant dev_err() for devm_ioremap_resource() failure (Chen Hui) - Remove redundant initialization (Colin Ian King) - Drop redundant dev_err() for platform_get_irq() errors (Krzysztof Wilczyński)" * tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (98 commits) riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC PCI: fu740: Add SiFive FU740 PCIe host controller driver dt-bindings: PCI: Add SiFive FU740 PCIe host controller MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver clk: sifive: Use reset-simple in prci driver for PCIe driver clk: sifive: Add pcie_aux clock in prci driver for PCIe driver PCI: brcmstb: Use reset/rearm instead of deassert/assert ata: ahci_brcm: Fix use of BCM7216 reset controller reset: add missing empty function reset_control_rearm() PCI: Allow VPD access for QLogic ISP2722 PCI/VPD: Add helper pci_get_func0_dev() PCI/VPD: Remove pci_vpd_find_tag() SRDT handling PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument PCI/VPD: Change pci_vpd_init() return type to void PCI/VPD: Make missing VPD message less alarming PCI/VPD: Remove pci_set_vpd_size() x86/PCI: Remove unused alloc_pci_root_info() return value MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer PCI: mediatek-gen3: Add system PM support PCI: mediatek-gen3: Add MSI support ...
2021-04-17r8169: keep pause settings on interface down/up cycleHeiner Kallweit1-5/+9
Currently, if the user changes the pause settings, the default settings will be restored after an interface down/up cycle, and also when resuming from suspend. This doesn't seem to provide the best user experience. Change this to keep user settings, and just ensure that in jumbo mode pause is disabled. Small drawback: When switching back mtu from jumbo to non-jumbo then pause remains disabled (but user can enable it using ethtool). I think that's a not too common scenario and acceptable. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+7
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c - keep the ZC code, drop the code related to reinit net/bridge/netfilter/ebtables.c - fix build after move to net_generic Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-14r8169: don't advertise pause in jumbo modeHeiner Kallweit1-2/+7
It has been reported [0] that using pause frames in jumbo mode impacts performance. There's no available chip documentation, but vendor drivers r8168 and r8125 don't advertise pause in jumbo mode. So let's do the same, according to Roman it fixes the issue. [0] https://bugzilla.kernel.org/show_bug.cgi?id=212617 Fixes: 9cf9b84cc701 ("r8169: make use of phy_set_asym_pause") Reported-by: Roman Mamedov <rm+bko@romanrm.net> Tested-by: Roman Mamedov <rm+bko@romanrm.net> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14r8169: add support for pause ethtool opsHeiner Kallweit1-0/+28
This adds support for the [g|s]et_pauseparam ethtool ops. It considers that the chip doesn't support pause frame use in jumbo mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-09r8169: use mac-managed PHY PMHeiner Kallweit1-0/+3
Use the new mac_managed_pm flag to indicate that the driver takes care of PHY power management. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-03-31ARM: iop32x: disable N2100 PCI parity reportingHeiner Kallweit1-14/+0
On the N2100, instead of just marking the r8169 chips as having broken_parity_status, disable parity error reporting for them entirely. This was the only relevant place that set broken_parity_status, so we no longer need to check for it in the r8169 error interrupt handler. [bhelgaas: squash into one patch, commit log] Link: https://lore.kernel.org/r/20210330174318.1289680-4-helgaas@kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-03-25r8169: remove rtl_hw_start_8168c_3Heiner Kallweit1-6/+1
We can simply use rtl_hw_start_8168c_2() also for chip version 21. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+4
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-20r8169: add support for ethtool get_ringparamHeiner Kallweit1-0/+10
Add support for the ethtool get_ringparam operation. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-20r8169: fix DMA being used after buffer free if WoL is enabledHeiner Kallweit1-2/+4
IOMMU errors have been reported if WoL is enabled and interface is brought down. It turned out that the network chip triggers DMA transfers after the DMA buffers have been freed. For WoL to work we need to leave rx enabled, therefore simply stop the chip from being a DMA busmaster. Fixes: 567ca57faa62 ("r8169: add rtl8169_up") Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-19r8169: use lower_32_bits/upper_32_bits macrosHeiner Kallweit1-4/+2
Use the lower_32_bits/upper_32_bits macros to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-05r8169: fix r8168fp_adjust_ocp_cmd functionHayes Wang1-1/+1
The (0xBAF70000 & 0x00FFF000) << 6 should be (0xf70 << 18). Fixes: 561535b0f239 ("r8169: fix OCP access on RTL8117") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-25r8169: fix jumbo packet handling on RTL8168eHeiner Kallweit1-2/+2
Josef reported [0] that using jumbo packets fails on RTL8168e. Aligning the values for register MaxTxPacketSize with the vendor driver fixes the problem. [0] https://bugzilla.kernel.org/show_bug.cgi?id=211827 Fixes: d58d46b5d851 ("r8169: jumbo fixes.") Reported-by: Josef Oškera <joskera@redhat.com> Tested-by: Josef Oškera <joskera@redhat.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/b15ddef7-0d50-4320-18f4-6a3f86fbfd3e@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-17r8169: use macro pm_ptrHeiner Kallweit1-3/+1
Use macro pm_ptr(), this helps to avoid some ifdeffery. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: re-solve some conflicts after net -> net-next mergeJakub Kicinski1-25/+0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+25
2021-02-15net: phy: rename PHY_IGNORE_INTERRUPT to PHY_MAC_INTERRUPTHeiner Kallweit1-1/+1
Some internal PHY's have their events like link change reported by the MAC interrupt. We have PHY_IGNORE_INTERRUPT to deal with this scenario. I'm not too happy with this name. We don't ignore interrupts, typically there is no interrupt exposed at a PHY level. So let's rename it to PHY_MAC_INTERRUPT. This is in line with phy_mac_interrupt(), which is called from the MAC interrupt handler to handle PHY events. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15r8169: fix resuming from suspend on RTL8105e if machine runs on batteryHeiner Kallweit1-0/+2
Armin reported that after referenced commit his RTL8105e is dead when resuming from suspend and machine runs on battery. This patch has been confirmed to fix the issue. Fixes: e80bd76fbf56 ("r8169: work around power-saving bug on some chip versions") Reported-by: Armin Wolf <W_Armin@gmx.de> Tested-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15r8169: fix resuming from suspend on RTL8105e if machine runs on batteryHeiner Kallweit1-0/+1
Armin reported that after referenced commit his RTL8105e is dead when resuming from suspend and machine runs on battery. This patch has been confirmed to fix the issue. Fixes: e80bd76fbf56 ("r8169: work around power-saving bug on some chip versions") Reported-by: Armin Wolf <W_Armin@gmx.de> Tested-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11r8169: handle tx before rx in napi pollHeiner Kallweit1-2/+2
Cleaning up tx descriptors first increases the chance that rtl_rx() can allocate new skb's from the cache. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11r8169: disable detection of bogus xid's 308/388Heiner Kallweit1-3/+6
Several years ago these two entries have been added, but it's not clear why. There's no trace that there has ever been such a chip version, and not even the r8101 vendor driver knows these id's. So let's disable detection, and if nobody complains remove them completely later. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11r8169: re-configure WOL settings on resume from hibernationHeiner Kallweit1-11/+5
So far we don't re-configure WOL-related register bits when waking up from hibernation. I'm not aware of any problem reports, but better play safe and call __rtl8169_set_wol() in the resume() path too. To achieve this move calling __rtl8169_set_wol() to rtl8169_net_resume() and rename the function to rtl8169_runtime_resume(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-06r8169: don't try to disable interrupts if NAPI is scheduled alreadyHeiner Kallweit1-2/+4
There's no benefit in trying to disable interrupts if NAPI is scheduled already. This allows us to save a PCI write in this case. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/78c7f2fb-9772-1015-8c1d-632cbdff253f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02r8169: Add support for another RTL8168FPKai-Heng Feng3-6/+13
According to the vendor driver, the new chip with XID 0x54b is essentially the same as the one with XID 0x54a, but it doesn't need the firmware. So add support accordingly. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20210202044813.1304266-1-kai.heng.feng@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-8/+67
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02r8169: fix WoL on shutdown if CONFIG_DEBUG_SHIRQ is setHeiner Kallweit1-2/+2
So far phy_disconnect() is called before free_irq(). If CONFIG_DEBUG_SHIRQ is set and interrupt is shared, then free_irq() creates an "artificial" interrupt by calling the interrupt handler. The "link change" flag is set in the interrupt status register, causing phylib to eventually call phy_suspend(). Because the net_device is detached from the PHY already, the PHY driver can't recognize that WoL is configured and powers down the PHY. Fixes: f1e911d5d0df ("r8169: add basic phylib support") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/fe732c2c-a473-9088-3974-df83cfbd6efd@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29r8169: work around RTL8125 UDP hw bugHeiner Kallweit1-6/+65
It was reported that on RTL8125 network breaks under heavy UDP load, e.g. torrent traffic ([0], from comment 27). Realtek confirmed a hw bug and provided me with a test version of the r8125 driver including a workaround. Tests confirmed that the workaround fixes the issue. I modified the original version of the workaround to meet mainline code style. [0] https://bugzilla.kernel.org/show_bug.cgi?id=209839 v2: - rebased to net v3: - make rtl_skb_is_udp() more robust and use skb_header_pointer() to access the ip(v6) header v4: - remove dependency on ptp_classify.h - replace magic number with offsetof(struct udphdr, len) Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Tested-by: xplo <xplo.bn@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/6e453d49-1801-e6de-d5f7-d7e6c7526c8f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27r8169: remove not needed call to rtl_wol_enable_rx from rtl_shutdownHeiner Kallweit1-3/+1
rtl_wol_enable_rx() is called via the following call chain if WoL is enabled: rtl8169_down() -> rtl_prepare_power_down() -> rtl_wol_enable_rx() Therefore we don't have to call this function here. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/34ce78e2-596c-e2ac-16aa-c550fa624c22@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12r8169: improve DASH supportHeiner Kallweit1-31/+22
Instead of doing the full DASH check each time r8168_check_dash() is called, let's do it once in probe and store DASH capabilities in a new rtl8169_private member. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12r8169: improve rtl8169_rx_csumHeiner Kallweit1-3/+5
Extend the mask to include the checksum failure bits. This allows to simplify the condition in rtl8169_rx_csum(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12r8169: align rtl_wol_suspend_quirk with vendor driver and rename itHeiner Kallweit1-16/+4
At least from chip version 25 the vendor driver sets these rx flags for all chip versions if WOL is enabled. Therefore I wouldn't consider it a quirk, so let's rename the function. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11r8169: clean up rtl_pll_power_down/up functionsHeiner Kallweit1-8/+3
Clean up the remainings of rtl_pll_power_down/up and rename rtl_pll_power_down() to rtl_prepare_power_down(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.