aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intel/iwlwifi/iwl-prph.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-05-18iwlwifi: mvm: add OTP info in case of init failureMordechay Goodstein1-0/+2
This helps to understand HW issues that can happen while initializing the nic. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20220517120045.48464938b27a.I9b381f0da5e0636ad6a5f6c13f98edb9031b50fb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-18iwlwifi: mvm: add additional info for boot info failuresMordechay Goodstein1-0/+2
This info helps for additional info in case we have issues with HPM state at boot time. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220205112029.e3530bf30f1f.Ib354675937352f6e4a992f1d5d49f2f38acfe2e5@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: mvm: add additional info for boot info failuresMordechay Goodstein1-1/+4
This info helps for additional info in case we have issues with OTP at boot time. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220205112029.7971a6d70653.Icb3ee1e5d52e5437531dadeda63e32719b44b645@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: read and print OTP minor versionLuca Coelho1-0/+2
Sometimes it can be useful to know the OTP minor version, so read it from the register and print it out. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220130115024.a90a1363558e.Ifc08db91cdc7d2e8353af55afaf899e10b2ef875@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: yoyo: remove DBGI_SRAM address reset writingRotem Saado1-2/+0
Due to preg protection we cannot write to this register while FW is running (when FW in Halt it is ok). since we have some cases that we need to dump this region while FW is running remove this writing from DRV. FW will do this writing. Signed-off-by: Rotem Saado <rotem.saado@intel.com> Fixes: 89639e06d0f3 ("iwlwifi: yoyo: support for new DBGI_SRAM region") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220129105618.209f3078bc74.I463530bd2f40daedb39f6d9df987bb7cee209033@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: yoyo: fix DBGI_SRAM ini dump header.Rotem Saado1-0/+2
DBGI SRAM is new type of monitor, therefore it should be dump as monitor type with ini dump monitor header. Signed-off-by: Rotem Saado <rotem.saado@intel.com> Fixes: 89639e06d0f3 ("iwlwifi: yoyo: support for new DBGI_SRAM region") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220129105618.6c31f6a2dcfc.If311c1d548bc5f7157a449e848ea01f71f5592eb@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: Read the correct addresses when getting the crf idMatti Gottlieb1-2/+0
The original implementation checked the HW family, and as a result of that used different addresses for the prph registers. The old HWs addresses start with 0xa****** and the newer ones start with 0xd******. For this there are iwl_read/write_umac_prph functions that just add the diff in the address automatically (in this case 0x300000), so the code will be common for all HWs In the original implementation the address given already had the 0xd****** causing the address to become 0x10***** (after adding the offset) Change the registers to start with 0xa*****. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211210090244.db2722547eb2.I03dce63698befc2fd9105111c3015b8d6e36868a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: pcie: support Bz suspend/resume triggerHaim Dreyfuss1-0/+7
Instead of using two bits in the doorbell interrupt, the new Bz devices have a new CSR_IPC_SLEEP_CONTROL register to let drivers indicate the desired transition before triggering the doorbell interrupt. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083238.63f3d150689a.Iaeb6f9b007e81b1a5a02144b0281935e4613cb78@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: Add support for more BZ HWsMatti Gottlieb1-0/+1
Add support for GA and for BZ with FM rf. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.64ab5278fb9f.I4f2a547dc04c3d14cacdbc739da0b056fc04923d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: Add support for getting rf id with blank otpMatti Gottlieb1-0/+35
When having a blank OTP the only way to get the rf id and the cdb info is from prph registers. Currently there is some implementation for this, but it is located in the wrong place in the code (should be before trying to understand what HW is connected and not after), and it has a partial implementation. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.820c2ae18c2b.Iec9b2e2615ce65e6aff5ce896589227a7030f4cf@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: yoyo: support for new DBGI_SRAM regionMukesh Sisodiya1-0/+7
new region handling is added for dump collection. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210819183728.af9a24b82396.I53c5f82bd2d0f56fd699e3841c922082d99f1c90@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-06-22iwlwifi: pcie: identify the RF moduleJohannes Berg1-1/+3
Identify and print out the RF module to be able to identify (from logs and through debugfs) which one (and version) is present on the system. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210617100544.cd1ef97b2c04.Iad42a59902a87a50b45b9ce88705863686a83b54@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-08Merge tag 'iwlwifi-next-for-kalle-2021-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-nextKalle Valo1-0/+1
iwlwifi patches intended for v5.12 * Check FW notification sizes for robustness; * Improvements in the NAPI implementation; * Implement a workaround for CCA-EXT; * Add new FW API support; * Fix a CSA bug; * Implement PHY integration version parsing; * A bit of refactoring; * One more CSA bug fix, this time in the AP side; * Support for new So devices and a bit of reorg; * Per Platform Antenna Gain (PPAG) fixes and improvements; * Improvements in the debug framework; * Some other clean-ups and small fixes. # gpg: Signature made Fri 05 Feb 2021 12:04:21 PM EET using RSA key ID 1A3CC5FA # gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>" # gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"
2021-02-05iwlwifi: mvm: add IML/ROM information for other HW familiesMordechay Goodstein1-0/+1
This makes it easier to debug IML/ROM errors for other HW families as well. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210131201907.4a802b308a0f.I77855abbf6dc1a6edf9c914f3313a87bd78de4df@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-01-25iwlwifi: pcie: set LTR on more devicesJohannes Berg1-0/+6
To avoid completion timeouts during device boot, set up the LTR timeouts on more devices - similar to what we had before for AX210. This also corrects the AX210 workaround to be done only on discrete (non-integrated) devices, otherwise the registers have no effect. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: edb625208d84 ("iwlwifi: pcie: set LTR to avoid completion timeout") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.fb819e19530b.I0396f82922db66426f52fbb70d32a29c8fd66951@changeid
2020-12-10iwlwifi: support firmware reset handshakeJohannes Berg1-0/+2
There are some races in the hardware that can possibly lead to a bus lockup later during a restart when we manage to kill the firmware at a bad time (while it's accessing the bus). To work around this, add support for a new handshake between firmware and driver to ensure that the firmware is in a well- known state before we kill it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.7756fcc9865c.I13de65e0ffcb4186dd4c1a465f66df2e98c9a947@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: use SPDX tagsJohannes Berg1-61/+6
Use SPDX tags instead of the long copyright notices. Also cleanup some duplicate copyright notices and combine the years where possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: mvm: fix 22000 series driver NMIJohannes Berg1-1/+1
For triggering an NMI in the firmware, we should only set BIT(24) in the corresponding register, not the entire mask that's usable by the driver. This currently doesn't matter because the firmware only enables BIT(24), but we'll start using BIT(25) for other purposes with an upcoming API change. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.2f982365d085.Id09daabfd331ba9e120abcbbedd2ad6448902ed0@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: pcie: remove obsolete pre-release support codeEmmanuel Grumbach1-4/+0
We no longer need code that was introduced to differentiate between two early versions of 8260. We can remove this convoluted way to get the hardware version that was needed because of a bug in the register's configuration. Moreover, since we no longer need to access the PRPH registers, we no longer need to wake up the device, request ownership, etc... Remove all that. This allows us to get the rid of the obsolete comment about the AUX bus MISC address space which should have been moved when this code was moved away from here. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.4a5665ccd8a6.Iff3879405c15758ba661c430e77dc2160ddada1c@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: yoyo: add the ability to dump phy peripheryMordechay Goodstein1-0/+18
This enables analyzing phy/HW bugs. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231351.53bce4f8353d.Ia6944582bd2c748387aaef96755d8919c5d25dc1@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-08iwlwifi: mvm: ring the doorbell and wait for PNVM load completionLuca Coelho1-0/+1
When we receive a non-zero SKU_ID in the alive notification, we need to ring the doorbell and wait for the FW to send us a PNVM load complete notification before we continue the init phase. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.a10e8b6bbcf9.Ib5d10b3d508a4d2d4e6b7b629af89d76f4f03d81@changeid
2020-05-08iwlwifi: yoyo: add support for parsing SHARED_MEM_ALLOC version 4Mordechay Goodstein1-6/+5
The new version adds the information for RX2C FIFO addresses. Use the new addresses to parse the FIFO info when dumping. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200424182643.97cc25d96b53.I65fd0400d80f505bd6d7eed442f12db24b25bbe3@changeid
2020-01-04iwlwifi: prph: remove some unused register definitionsJohannes Berg1-7/+0
There are some unused register definitions, remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-01-04iwlwifi: mvm: print out extended secboot status before dumpJohannes Berg1-0/+3
Print out the secure boot status, extended by the PCs of LMACs and the UMAC. This needs to be before dumping, as dumping will corrupt the PC (if the NMI is handled), so move that down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-05Merge tag 'wireless-drivers-next-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-nextDavid S. Miller1-0/+7
Kalle Valo says: ==================== wireless-drivers-next patches for 5.5 First set of patches for 5.5. The most active driver here clearly is rtw88, lots of patches for it. More quiet on other drivers, smaller fixes and cleanups all over. This pull request also has a trivial conflict, the report and example resolution here: https://lkml.kernel.org/r/20191031111242.50ab1eca@canb.auug.org.au Major changes: rtw88 * add deep power save support * add mac80211 software tx queue (wake_tx_queue) support * enable hardware rate control * add TX-AMSDU support * add NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 support * add power tracking support * add 802.11ac beamformee support * add set_bitrate_mask support * add phy_info debugfs to show Tx/Rx physical status * add RFE type 3 support for 8822b ath10k * add support for hardware rfkill on devices where firmware supports it rtl8xxxu * add bluetooth co-existence support for single antenna iwlwifi * Revamp the debugging infrastructure ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-25iwlwifi: dbg_ini: add monitor dumping supportShahar S Matityahu1-0/+7
Allow collecting monitor data in ini debug mode. Implement both SMEM and DRAM monitor regions dumping. For DRAM monitor, support DBGC1, DBGC2 and DBGC3 and support several DRAM fragments per DBGC. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-23iwlwifi: pcie: add workaround for power gating in integrated 22000Luca Coelho1-0/+5
Add a workaround that forces power gating to be enabled on integrated 22000 devices. This improves power saving in certain situations. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-06iwlwifi: add support for suspend-resume flow for new device generationHaim Dreyfuss1-0/+5
The new device generation has a slightly different suspend resume flow Currently, the way the driver instruct the device to move to D3 is by sending D3_CONFIG_CMD. Instead of using the host command the indication is by writing to the doorbell interrupt. The FW will respond with interrupt to indicate transition completion. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-01iwlwifi: print fseq info upon fw assertShahar S Matityahu1-1/+14
Read fseq info from FW registers and print it upon fw assert. The print is needed since the fseq version coming from the TLV might not be the actual version that is used. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-01iwlwifi: clear persistence bit according to device familyShahar S Matityahu1-1/+6
The driver attempts to clear persistence bit on any device familiy even though only 9000 and 22000 families require it. Clear the bit only on the relevant device families. Each HW has different address to the write protection register. Use the right register for each HW Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Fixes: 8954e1eb2270 ("iwlwifi: trans: Clear persistence bit when starting the FW") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-03-22iwlwifi: dbg: add DRAM monitor support for AX210 device familyShahar S Matityahu1-0/+6
Allows to perform monitor dumping on AX210 device family Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: add force NMI for AX210 devicesShaul Triebitz1-2/+5
For AX210 devices, the periphry for forcing NMI has changed. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwiwifi: fix bad monitor buffer register addressesShahar S Matityahu1-2/+2
The monitor buffer register address is wrong. Set the right address Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Fixes: c2d202017da1 ("iwlwifi: pcie: add firmware monitor capabilities") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: dbg: dump data according to the new ini TLVsSara Sharon1-0/+6
When ini TLVs are loaded, dump data according to the stored configuration. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11iwlwifi: trans: Clear persistence bit when starting the FWShahar S Matityahu1-0/+7
In D3 suspend flow in 9260 gen2 HW, the NIC receives two PERST signals. The first PERST is expected and indicates the device on coming resume flow. The second PERST causes FW restart FW restart. In order to avoid this issue, the FW set the persistence bit on. Once this bit is set, the FW ignores reset attempts. The problem is when the FW gets assert during D3 and then the persistence bit is set and causes the FW to ignore reset. To handle this issue, the FW opens the preg bit which allows access to the persistence bit, so that the driver clear the persistence bit and reset the NIC. The flow is as follows: the driver checks if the persistence bit is set. If the bit is set, the driver checks if he can clear the bit. If the driver can not clear the bit then there is no point to continue configuring the NIC since it will fail. The fix was added is in start HW flow instead of the resume flow since in general, if the persistence bit is set, the driver can not start the FW. So it is good to check it when we start configuring the NIC. The driver does not need to close the preg bit since the FW close it during the start flow. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: remove all occurrences of the FSF address paragraphLuca Coelho1-5/+0
The Free Software Foundation address is superfluous and causes checkpatch to issue a warning when present. Remove all paragraphs with FSF's address to prevent that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: fix nmi triggering from hostGolan Ben-Ami1-4/+3
Although nmi was triggered fine till now, it appears that the driver didn't write the exact correct values to the correct addresses for each HW. Fix the nmi triggering by setting the correct addresses and values. Fixes: 4c9706dc2f29 ("iwlwifi: update nmi register") Signed-off-by: Golan Ben-Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: add support of FPGA fwTzipi Peres1-0/+6
Load FW according to NIC type, taking into account simulation, if exists. This is determined by a prph register. Signed-off-by: Tzipi Peres <tzipi.peres@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-23iwlwifi: use bitfield.h for some registersJohannes Berg1-8/+9
Letting the preprocessor/compiler generate the shift/mask by itself is a win for readability, so use bitfield.h for some registers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-05iwlwifi: mvm: fix firmware debug restart recordingEmmanuel Grumbach1-0/+1
When we want to stop the recording of the firmware debug and restart it later without reloading the firmware we don't need to resend the configuration that comes with host commands. Sending those commands confused the hardware and led to an NMI 0x66. Change the flow as following: * read the relevant registers (DBGC_IN_SAMPLE, DBGC_OUT_CTRL) * clear those registers * wait for the hardware to complete its write to the buffer * get the data * restore the value of those registers (to restart the recording) For early start (where the configuration is already compiled in the firmware), we don't need to set those registers after the firmware has been loaded, but only when we want to restart the recording without having restarted the firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: gen2: support nmi triggering from hostLiad Kaufman1-0/+1
For gen2 there is a new register. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: mvm: support change to a000 smem APISara Sharon1-0/+2
API was changed once more to support 2 LMACs. Adapt to change while preserving current functionality. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: mvm: remove unneeded reg write in iwl_mvm_up()Liad Kaufman1-3/+0
Not only that this write is not needed (as FW does this itself), on newer HW this register is write protected so trying to write there will cause problems. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: mvm: read new secure boot registersSara Sharon1-0/+2
Addresses were changed for a000 devices. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: pcie: add context information supportSara Sharon1-0/+1
Context information structure is going to be used in a000 devices for firmware self init. The self init includes firmware self loading from DRAM by ROM. This means the TFH relevant firmware loading can be cleaned up. The firmware loading includes the paging memory as well, so op mode can stop initializing the paging and sending the DRAM_BLOCK_CMD. Firmware is doing RFH, TFH and SCD configuration, while driver only fills the required configurations and addresses in the context information structure. The only remaining access to RFH is the write pointer, which is updated upon alive interrupt after FW configured the RFH. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: pcie: use WFPM_GP for debugging D3 flowsSara Sharon1-0/+1
This register is helpful for debugging D3 issues. Driver turns all bits on, and then on exit reads the updated value there. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-08-30iwlwifi: pcie: remove dead codeSara Sharon1-13/+0
If device family is 8000 then iwl_pcie_load_cpu_sections() won't be called at all (iwl_pcie_load_cpu_sections_8000() is called in that case) so this piece of code never gets called. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-08-30iwlwifi: pcie: fix ucode load flow for a000 devicesSara Sharon1-0/+8
Turns out we should access TFH relative addresses. Also, the FH_UCODE_LOAD_STATUS was replaced by UREG_UCODE_LOAD_STATUS. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: pcie: Enable MSI mode when using MSI interruptsIdo Yariv1-0/+1
On some of the chipsets MSI & INTA interrupts are disabled by default in the HW registers, and need to be explicitly enabled to be used. In case MSI-X isn't used, make sure MSI mode is enabled by setting the relevant HW register. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-03-20iwlwifi: mvm: support dumping UMAC internal txfifosGolan Ben-Ami1-0/+12
In case of FW error, support dumping the UMAC internal txfifos. To do so, support version 2 of shared memory cfg command, which contains the sizes of the internal txfifos, and move the command to the system group. Signed-off-by: Golan Ben-Ami <golan.ben.ami@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.