aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/mediatek/mt76/mt7615
AgeCommit message (Collapse)AuthorFilesLines
2022-10-11wifi: mt76: fix rx checksum offload on mt7615/mt7915/mt7921Felix Fietkau1-1/+3
Checking the relevant rxd bits for the checksum information only indicates if the checksum verification was performed by the hardware and doesn't show actual checksum errors. Checksum errors are indicated in the info field of the DMA descriptor. Fix packets erroneously marked as CHECKSUM_UNNECESSARY by checking the extra bits as well. Those bits are only passed to the driver for MMIO devices at the moment, so limit checksum offload to those. Fixes: 2122dfbfd0bd ("mt76: mt7615: add rx checksum offload support") Fixes: 94244d2ea503 ("mt76: mt7915: add rx checksum offload support") Fixes: 0e75732764e8 ("mt76: mt7921: enable rx csum offload") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005130824.23371-2-nbd@nbd.name
2022-10-11wifi: mt76: fix receiving LLC packets on mt7615/mt7915Felix Fietkau1-4/+4
When 802.3 decap offload is enabled, the hardware indicates header translation failure, whenever either the LLC-SNAP header was not found, or a VLAN header with an unregcognized tag is present. In that case, the hardware inserts a 2-byte length fields after the MAC addresses. For VLAN packets, this tag needs to be removed. However, for 802.3 LLC packets, the length bytes should be preserved, since there is no separate ethertype field in the data. This fixes an issue where the length field was omitted for LLC frames, causing them to be malformed after hardware decap. Fixes: 1eeff0b4c1a6 ("mt76: mt7915: fix decap offload corner case with 4-addr VLAN frames") Reported-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005130824.23371-1-nbd@nbd.name
2022-09-30Merge tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-nextJakub Kicinski3-12/+9
Kalle Valo says: ==================== wireless-next patches for v6.1 Few stack changes and lots of driver changes in this round. brcmfmac has more activity as usual and it gets new hardware support. ath11k improves WCN6750 support and also other smaller features. And of course changes all over. Note: in early September wireless tree was merged to wireless-next to avoid some conflicts with mac80211 patches, this shouldn't cause any problems but wanted to mention anyway. Major changes: mac80211 - refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO) feature continues brcmfmac - support CYW43439 SDIO chipset - support BCM4378 on Apple platforms - support CYW89459 PCIe chipset rtw89 - more work to get rtw8852c supported - P2P support - support for enabling and disabling MSDU aggregation via nl80211 mt76 - tx status reporting improvements ath11k - cold boot calibration support on WCN6750 - Target Wake Time (TWT) debugfs support for STA interface - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - implement SRAM dump debugfs interface - enable threaded NAPI on all hardware - WoW support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz wcn36xx - add SNR from a received frame as a source of system entropy * tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits) wifi: rtl8xxxu: Improve rtl8xxxu_queue_select wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM wifi: rtl8xxxu: gen2: Enable 40 MHz channel width wifi: rtw89: 8852b: configure DLE mem wifi: rtw89: check DLE FIFO size with reserved size wifi: rtw89: mac: correct register of report IMR wifi: rtw89: pci: set power cut closed for 8852be wifi: rtw89: pci: add to do PCI auto calibration wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf wifi: rtw89: add DMA busy checking bits to chip info wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels wifi: rtw89: pci: mask out unsupported TX channels iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper wifi: iwlwifi: Track scan_cmd allocation size explicitly brcmfmac: Remove the call to "dtim_assoc" IOVAR brcmfmac: increase dcmd maximum buffer size brcmfmac: Support 89459 pcie brcmfmac: increase default max WOWL patterns to 16 cw1200: fix incorrect check to determine if no element is found in list ... ==================== Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15wifi: mt76: mt7663s: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Deren Wu1-12/+3
Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to handle the .suspend/.resume callbacks. The new macros allow suspend and resume functions to be automatically dropped without any #ifdef guards. Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-15wifi: mt76: mt7663s: add rx_check callbackLorenzo Bianconi1-0/+1
Introduce rx_check callback support for mt7663s driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-15wifi: mt76: mt7615: add mt7615_mutex_acquire/release in mt7615_sta_set_decap_offloadLorenzo Bianconi1-0/+4
Similar to mt7921 driver, introduce mt7615_mutex_acquire/release in mt7615_sta_set_decap_offload in order to avoid sending mcu commands while the device is in low-power state. Fixes: d4b98c63d7a77 ("mt76: mt7615: add support for rx decapsulation offload") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-15wifi: mt76: add rx_check callback for usb devicesLorenzo Bianconi1-0/+1
Introduce rx_check callback support for mt7663u and mt7921u drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-12wifi: mt76: fix reading current per-tid starting sequence number for aggregationFelix Fietkau1-1/+1
The code was accidentally shifting register values down by tid % 32 instead of (tid * field_size) % 32. Cc: stable@vger.kernel.org Fixes: a28bef561a5c ("mt76: mt7615: re-enable offloading of sequence number assignment") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220826182329.18155-1-nbd@nbd.name
2022-07-18Merge tag 'mt76-for-kvalo-2022-07-11' of https://github.com/nbd168/wirelessKalle Valo11-322/+110
mt76 patches for 5.20 - preparation for new chipset support - fixes - VHT/HE related improvements - ACPI SAR support [kvalo@kernel.org: fix mac80211 API changes in start_ap() and stop_ap()]
2022-07-15wifi: mac80211: change QoS settings API to take link into accountJohannes Berg1-1/+2
Take the link into account in the QoS settings (EDCA parameters) APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-11mt76: convert MT_TX_HW_QUEUE_EXT_PHY to MT_TX_HW_QUEUE_PHYLorenzo Bianconi3-9/+8
Report phy_indx in tx_info->hw_queue. This is a preliminary patch to add newer chipset support Co-developed-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: add phy_idx to mt76_wcidLorenzo Bianconi2-5/+5
Introduce phy_idx to mt76_wcid structure instead of ext_phy. This is a preliminary patch to add newer chipset support. Co-developed-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: introduce phys array in mt76_dev structureLorenzo Bianconi5-38/+44
Introduce phys array in mt76_dev structure to reference mt76_phy supported by the chipset. This is a preliminary patch to introduce newer chipset support. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: add phy_idx in mt76_rx_statusLorenzo Bianconi1-1/+1
Introduce phy_idx mt76_rx_status instead of ext_idx. This is a preliminary patch to add newer chipset support Co-developed-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move tx initialization/cleanup in mt76_connac moduleLorenzo Bianconi1-6/+3
Move mt76_connac_init_tx_queues and mt76_connac_tx_cleanup routines in mt76_connac module. This is a preliminary patch to add mt7990 chipset support. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: do not use skb_set_queue_mapping for internal purposesFelix Fietkau5-7/+9
Previously the code used skb_set_queue_mapping for management or non-bufferable powersave frames that need to be sent to a different hardware queue. This can confuse AQL, which expects the value to remain the same until the tx status report. The only place that currently uses the altered skb queue mapping is the txwi write function. Change the code to pass the hardware queue id as a function parameter instead. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7615: fix throughput regression on DFS channelsFelix Fietkau4-25/+7
For some reason, mt7615 reacts badly to repeatedly enabling/disabling the radar detector without also switching the channel. This results in very bad throughput on DFS channels, because hw->conf.radar_enabled can get toggled a few times after CAC ends. Fix this by always leaving the DFS detector enabled on DFS channels and instead suppress unwanted detection events. Fixes: 2c86f6752046 ("mt76: mt7615: fix/rewrite the dfs state handling logic") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7615: add sta_rec with EXTRA_INFO_NEW for the first time onlyFelix Fietkau2-1/+9
Set EXTRA_INFO_NEW for the first time only to prevent adding the same starec entry, otherwise the entry might be removed in fw. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: move mt76_connac2_mcu_fill_message in mt76_connac moduleLorenzo Bianconi1-3/+0
Move mt76_connac2_mcu_fill_message routine in shared module in order to reuse it for mt7921 and mt7915e drivers. This is a preliminary patch to add mt7990 driver support. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move mt7615_txp_skb_unmap in common codeLorenzo Bianconi2-57/+1
Move mt7615_txp_skb_unmap in shared code and reuse it in mt7915e and mt7921e driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move mt76_connac_write_hw_txp in shared codeLorenzo Bianconi2-45/+1
Now we can move mt76_connac_write_hw_txp routine in mt76-connac module and reuse it in mt7921e and mt7615e driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move mt76_connac_tx_complete_skb in shared codeLorenzo Bianconi4-35/+1
Since now txp structures are in common code we can reuse mt76_connac_tx_complete_skb routine in mt7921e, mt7915e and mt7615e drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move mt76_connac_tx_free in shared codeLorenzo Bianconi2-11/+4
Move mt76_connac_tx_free structure in mt76_connac module since it is shared by mt7615 and mt7921 drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: move mt7615_txp_ptr in mt76_connac moduleLorenzo Bianconi4-30/+8
Since mt7615_txp_ptr is shared between mt7615 and mt7921 move it in mt76_connac module. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move mt76_connac_fw_txp in common moduleLorenzo Bianconi3-37/+7
Since mt76_connac_fw_txp struct is shared between mt7615e, mt7915e and mt7921e, move it in mt76_connac module. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7615: do not update pm stats in case of errorLorenzo Bianconi1-4/+5
Do not update pm stats if mt7615_mcu_fw_pmctrl returns an error. Fixes: abe912ae3cd42 ("mt76: mt7663: add awake and doze time accounting") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: enable the VHT extended NSS BW featureDeren Wu1-0/+1
According IEEE Std 802.11-2020, its definition is: Indicates whether the STA is capable of interpreting the Extended NSS BW Support subfield of the VHT Capabilities Information field. Some APs, such as Xiaomi AX6000, would check this one for BW settings. mt76 driver can get max BW capability only if the this field is confgured properly. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7663: rely on mt76_connac2_fw_trailerLorenzo Bianconi1-16/+2
Remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7615: add missing bh-disable around rx napi scheduleFelix Fietkau1-0/+2
napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq handling, so it must not be called in a pure process context with BH enabled. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: add DBDC rxq handlings into mac_reset_workRyder Lee1-7/+7
Enable/disable rx napi for DBDC. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-06-20wifi: mac80211: return a beacon for a specific linkShaul Triebitz1-2/+2
Pass the link id through to the get_beacon and return the beacon for a specific link id. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: split bss_info_changed methodJohannes Berg1-1/+1
Split the bss_info_changed method to vif_cfg_changed and link_info_changed, with the latter getting a link ID. Also change the 'changed' parameter to u64 already, we know we need that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move interface config to new structJohannes Berg2-2/+2
We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move some future per-link data to bss_confJohannes Berg1-1/+1
To add MLD, reuse the bss_conf structure later for per-link information, so move some things into it that are per link. Most transformations were done with the following spatch: @@ expression sdata; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -sdata->vif.var +sdata->vif.bss_conf.var @@ struct ieee80211_vif *vif; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -vif->var +vif->bss_conf.var Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-13mt76: mt7615/mt7915: do reset_work with mt76's work queueBo Jiao1-1/+1
reset_work may be blocked when mcu message timeout occurs Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: add Wireless Ethernet Dispatch supportFelix Fietkau1-3/+3
This is used to support hardware flow offloading from Ethernet to WLAN Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: fix MBSS index condition in DBDC modeEvelyn Tsai1-3/+3
MT7915_MAX_INTERFACES is per-band declaration in MT7915/MT7986/MT7916. Enlarge vif_mask to 64 bits wide, including the bit operation. Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: fix use-after-free by removing a non-RCU wcid pointerFelix Fietkau1-1/+1
Fixes an issue caught by KASAN about use-after-free in mt76_txq_schedule by protecting mtxq->wcid with rcu_lock between mt76_txq_schedule and sta_info_[alloc, free]. [18853.876689] ================================================================== [18853.876751] BUG: KASAN: use-after-free in mt76_txq_schedule+0x204/0xaf8 [mt76] [18853.876773] Read of size 8 at addr ffffffaf989a2138 by task mt76-tx phy0/883 [18853.876786] [18853.876810] CPU: 5 PID: 883 Comm: mt76-tx phy0 Not tainted 5.10.100-fix-510-56778d365941-kasan #5 0b01fbbcf41a530f52043508fec2e31a4215 [18853.876840] Call trace: [18853.876861] dump_backtrace+0x0/0x3ec [18853.876878] show_stack+0x20/0x2c [18853.876899] dump_stack+0x11c/0x1ac [18853.876918] print_address_description+0x74/0x514 [18853.876934] kasan_report+0x134/0x174 [18853.876948] __asan_report_load8_noabort+0x44/0x50 [18853.876976] mt76_txq_schedule+0x204/0xaf8 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877002] mt76_txq_schedule_all+0x2c/0x48 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877030] mt7921_tx_worker+0xa0/0x1cc [mt7921_common f0875ebac9d7b4754e1010549e7db50fbd90a047] [18853.877054] __mt76_worker_fn+0x190/0x22c [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877071] kthread+0x2f8/0x3b8 [18853.877087] ret_from_fork+0x10/0x30 [18853.877098] [18853.877112] Allocated by task 941: [18853.877131] kasan_save_stack+0x38/0x68 [18853.877147] __kasan_kmalloc+0xd4/0xfc [18853.877163] kasan_kmalloc+0x10/0x1c [18853.877177] __kmalloc+0x264/0x3c4 [18853.877294] sta_info_alloc+0x460/0xf88 [mac80211] [18853.877410] ieee80211_prep_connection+0x204/0x1ee0 [mac80211] [18853.877523] ieee80211_mgd_auth+0x6c4/0xa4c [mac80211] [18853.877635] ieee80211_auth+0x20/0x2c [mac80211] [18853.877733] rdev_auth+0x7c/0x438 [cfg80211] [18853.877826] cfg80211_mlme_auth+0x26c/0x390 [cfg80211] [18853.877919] nl80211_authenticate+0x6d4/0x904 [cfg80211] [18853.877938] genl_rcv_msg+0x748/0x93c [18853.877954] netlink_rcv_skb+0x160/0x2a8 [18853.877969] genl_rcv+0x3c/0x54 [18853.877985] netlink_unicast_kernel+0x104/0x1ec [18853.877999] netlink_unicast+0x178/0x268 [18853.878015] netlink_sendmsg+0x3cc/0x5f0 [18853.878030] sock_sendmsg+0xb4/0xd8 [18853.878043] ____sys_sendmsg+0x2f8/0x53c [18853.878058] ___sys_sendmsg+0xe8/0x150 [18853.878071] __sys_sendmsg+0xc4/0x1f4 [18853.878087] __arm64_compat_sys_sendmsg+0x88/0x9c [18853.878101] el0_svc_common+0x1b4/0x390 [18853.878115] do_el0_svc_compat+0x8c/0xdc [18853.878131] el0_svc_compat+0x10/0x1c [18853.878146] el0_sync_compat_handler+0xa8/0xcc [18853.878161] el0_sync_compat+0x188/0x1c0 [18853.878171] [18853.878183] Freed by task 10927: [18853.878200] kasan_save_stack+0x38/0x68 [18853.878215] kasan_set_track+0x28/0x3c [18853.878228] kasan_set_free_info+0x24/0x48 [18853.878244] __kasan_slab_free+0x11c/0x154 [18853.878259] kasan_slab_free+0x14/0x24 [18853.878273] slab_free_freelist_hook+0xac/0x1b0 [18853.878287] kfree+0x104/0x390 [18853.878402] sta_info_free+0x198/0x210 [mac80211] [18853.878515] __sta_info_destroy_part2+0x230/0x2d4 [mac80211] [18853.878628] __sta_info_flush+0x300/0x37c [mac80211] [18853.878740] ieee80211_set_disassoc+0x2cc/0xa7c [mac80211] [18853.878851] ieee80211_mgd_deauth+0x4a4/0x10a0 [mac80211] [18853.878962] ieee80211_deauth+0x20/0x2c [mac80211] [18853.879057] rdev_deauth+0x7c/0x438 [cfg80211] [18853.879150] cfg80211_mlme_deauth+0x274/0x414 [cfg80211] [18853.879243] cfg80211_mlme_down+0xe4/0x118 [cfg80211] [18853.879335] cfg80211_disconnect+0x218/0x2d8 [cfg80211] [18853.879427] __cfg80211_leave+0x17c/0x240 [cfg80211] [18853.879519] cfg80211_leave+0x3c/0x58 [cfg80211] [18853.879611] wiphy_suspend+0xdc/0x200 [cfg80211] [18853.879628] dpm_run_callback+0x58/0x408 [18853.879642] __device_suspend+0x4cc/0x864 [18853.879658] async_suspend+0x34/0xf4 [18853.879673] async_run_entry_fn+0xe0/0x37c [18853.879689] process_one_work+0x508/0xb98 [18853.879702] worker_thread+0x7f4/0xcd4 [18853.879717] kthread+0x2f8/0x3b8 [18853.879731] ret_from_fork+0x10/0x30 [18853.879741] [18853.879757] The buggy address belongs to the object at ffffffaf989a2000 [18853.879757] which belongs to the cache kmalloc-8k of size 8192 [18853.879774] The buggy address is located 312 bytes inside of [18853.879774] 8192-byte region [ffffffaf989a2000, ffffffaf989a4000) [18853.879787] The buggy address belongs to the page: [18853.879807] page:000000004bda2a59 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d89a0 [18853.879823] head:000000004bda2a59 order:3 compound_mapcount:0 compound_pincount:0 [18853.879839] flags: 0x8000000000010200(slab|head) [18853.879857] raw: 8000000000010200 ffffffffbc89e208 ffffffffb7fb5208 ffffffaec000cc80 [18853.879873] raw: 0000000000000000 0000000000010001 00000001ffffffff 0000000000000000 [18853.879885] page dumped because: kasan: bad access detected [18853.879896] [18853.879907] Memory state around the buggy address: [18853.879922] ffffffaf989a2000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879935] ffffffaf989a2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879948] >ffffffaf989a2100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879961] ^ [18853.879973] ffffffaf989a2180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879986] ffffffaf989a2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879998] ================================================================== Cc: stable@vger.kernel.org Reported-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-06mt76: switch to netif_napi_add_tx()Jakub Kicinski1-2/+2
Switch to the new API not requiring passing in NAPI_POLL_WEIGHT. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504163316.549648-3-kuba@kernel.org
2022-03-16mt76: fix monitor rx FCS error in DFS channelDeren Wu1-1/+2
When setup monitor mode in DFS channel, mt76 send CH_SWITCH_DFS to fw for channel config. This would cause rx performance bad while monitoring frames. Settings CH_SWITCH_NORMAL in monitor mode would get the same performance as normal channels. Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: usb: introduce __mt76u_init utility routineLorenzo Bianconi1-1/+67
Introduce __mt76u_init unitility routine and move mt7615 usb bus ops into mt7615 module in order to allow specifying driver specific parameter. This is a preliminary patch to add usb support to mt7921 driver. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: use le32/16_get_bits() whenever possibleRyder Lee1-11/+9
Switch to use le32/16_get_bits() to simplfy codes and specify the size explicitly to avoid potential issues. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: split single ldpc cap bit into bitsMeiChia Chiu1-1/+1
The original single LDPC cap bit cannot be used to differentiate LDPC cap in each PHY mode. This modification split the single bit into 3 bits, ht_ldpc, vht_ldpc, and he_ldpc. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Suggested-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7663u: introduce mt7663u_mcu_power_on routineLorenzo Bianconi3-27/+27
Introduce mt7663u_mcu_power_on utility routine since the code is shared between mt7663u_mcu_init() and mt7663u_probe(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7615: honor ret from mt7615_mcu_restart in mt7663u_mcu_initLorenzo Bianconi1-1/+4
Check return value of mt7615_mcu_restart routine in mt7663u_mcu_init(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: fix dfs state issue with 160 MHz channelsFelix Fietkau1-3/+5
When operating on a mix of DFS and non-DFS channels, the driver only checks the CAC status of the control channel. This causes beacons/tx to fail if the control channel is on a non-DFS channel. Fix this by calling cfg80211_reg_can_beacon to determine the DFS status of all affected channels Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: improve signal strength reportingFelix Fietkau1-9/+0
Instead of just taking the maximum per-chain signal strength values, add an approximation for the sum of the combined signal. This should more accurately reflect the real signal strength, especially if the per-chain signal strength values are close to each other Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7615: Fix assigning negative values to unsigned variableYang Li1-1/+1
Smatch reports the following: drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865 mt7615_mac_adjust_sensitivity() warn: assigning (-110) to unsigned variable 'def_th' drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865 mt7615_mac_adjust_sensitivity() warn: assigning (-98) to unsigned variable 'def_th' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7615: fix compiler warning on frame sizeDeren Wu1-3/+11
The following error is see from the compiler: mt7615/debugfs.c: In function ‘mt7615_ext_mac_addr_read’: mt7615/debugfs.c:465:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] The issue is due to allocating a buffer as string storage. Fix by converting to a dynamical allocation of the buffer. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-23mt76: fix endianness errors in reverse_frag0_hdr_transLorenzo Bianconi1-12/+19
Fix ht ctl field size in mt{7615,7915,7921}_reverse_frag0_hdr_trans. Fix the following endianness warnings in mt{7615,7915,7921}_reverse_frag0_hdr_trans: drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:29: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:29: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:29: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:27: warning: incorrect type in assignment (different base types) drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:27: expected restricted __le16 [usertype] frame_control drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:27: got unsigned long drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:24: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:24: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:24: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:22: expected restricted __le16 [usertype] seq_ctrl drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:22: got unsigned long drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:20: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:20: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:20: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:18: expected restricted __le32 [usertype] qos_ctrl drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:18: got unsigned long drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:19: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:19: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:19: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:17: warning: incorrect type in assignment (different base types) drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:17: expected restricted __le32 [usertype] ht_ctrl drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:17: got unsigned long drivers/net/wireless/mediatek/mt76/mt7915/mac.c:448:25: warning: restricted __be16 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:448:38: warning: restricted __be16 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1450:23: warning: incorrect type in assignment (different base types) drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1450:23: expected unsigned int [usertype] *cur_info drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1450:23: got restricted __le32 * drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1451:34: warning: cast to restricted __le32 Fixes: dc5399a50b45f ("mt76: reverse the first fragmented frame to 802.11") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.