aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/mediatek/mt76/mt76x2/pci_init.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-12-19mt76: mt76x02: introduce SAR supportLorenzo Bianconi1-2/+3
Add SAR spec support to mt76x02 driver to allow configuring SAR power limitations on the frequency ranges from the userland. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: move mac_work in mt76_core moduleLorenzo Bianconi1-1/+1
Move mac_work delayed_work and mac_work_count in mt76_phy since it is used by all drivers. This is a preliminary patch to create a common mcu library used by mt7615 and mt7921 drivers Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move hw mac_addr in mt76_phyLorenzo Bianconi1-1/+1
This is a preliminary patch to properly support mt7915 dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: convert from tx tasklet to tx worker threadFelix Fietkau1-1/+1
This improves performance by allowing the scheduler to move the tx scheduling work to idle CPUs. Since tx scheduling work is very latency sensitive and kept short via AQL, sched_set_fifo_low is used to keep worker priority above normal tasks Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt76x2: fix pci suspend/resume on mt7612eLorenzo Bianconi1-0/+17
Fix the following mt7612e hw hangs during suspend/resume reported on Dell Vostro 3360 mt76x2e 0000:01:00.0: MCU message 2 (seq 11) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 12) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 13) timed out mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 mt76x2e 0000:01:00.0: Build: 1 mt76x2e 0000:01:00.0: Build Time: 201507311614____ mt76x2e 0000:01:00.0: Firmware running! ieee80211 phy0: Hardware restart was requested mt76x2e 0000:01:00.0: MCU message 2 (seq 1) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 2) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 3) timed out mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 mt76x2e 0000:01:00.0: Build: 1 mt76x2e 0000:01:00.0: Build Time: 201507311614____ mt76x2e 0000:01:00.0: Firmware running! ieee80211 phy0: Hardware restart was requested mt76x2e 0000:01:00.0: MCU message 31 (seq 5) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 6) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 7) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 8) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 9) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 10) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 11) timed out mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 mt76x2e 0000:01:00.0: Build: 1 mt76x2e 0000:01:00.0: Build Time: 201507311614____ mt76x2e 0000:01:00.0: Firmware running! ieee80211 phy0: Hardware restart was requested ------------[ cut here ]----------- CPU: 3 PID: 11956 Comm: kworker/3:1 Not tainted 5.7.0-pf2 #1 Hardware name: Dell Inc. Vostro 3360/0F5DWF, BIOS A18 09/25/2013 Workqueue: events_freezable ieee80211_restart_work [mac80211] RIP: 0010:ieee80211_reconfig+0x234/0x1700 [mac80211] RSP: 0018:ffffb803c23ffdf0 EFLAGS: 00010286 RAX: 00000000fffffff0 RBX: ffff9595a7564900 RCX: 0000000000000008 RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000100 RBP: ffff9595a7ec07e0 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff9595a7ec18d0 R13: 00000000ffffffff R14: 0000000000000000 R15: 00000000fffffff0 FS: 0000000000000000(0000) GS:ffff9595af2c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e56d7de000 CR3: 000000042200a001 CR4: 00000000001706e0 Call Trace: ieee80211_restart_work+0xb7/0xe0 [mac80211] process_one_work+0x1d4/0x3c0 worker_thread+0x228/0x470 ? process_one_work+0x3c0/0x3c0 kthread+0x19c/0x1c0 ? __kthread_init_worker+0x30/0x30 ret_from_fork+0x35/0x40 wlp1s0: Failed check-sdata-in-driver check, flags: 0x0 CPU: 3 PID: 11956 Comm: kworker/3:1 Tainted: G W 5.7.0-pf2 #1 Hardware name: Dell Inc. Vostro 3360/0F5DWF, BIOS A18 09/25/2013 Workqueue: events_freezable ieee80211_restart_work [mac80211] RIP: 0010:drv_remove_interface+0x11f/0x130 [mac80211] RSP: 0018:ffffb803c23ffc80 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9595a7564900 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000082 RDI: 00000000ffffffff RBP: ffff9595a7ec1930 R08: 00000000000004b6 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000006f08 R12: ffff9595a7ec1000 R13: ffff9595a75654b8 R14: ffff9595a7ec0ca0 R15: ffff9595a7ec07e0 FS: 0000000000000000(0000) GS:ffff9595af2c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e56d7de000 CR3: 000000042200a001 CR4: 00000000001706e0 Call Trace: ieee80211_do_stop+0x5af/0x8c0 [mac80211] ieee80211_stop+0x16/0x20 [mac80211] __dev_close_many+0xaa/0x120 dev_close_many+0xa1/0x2b0 dev_close+0x6d/0x90 cfg80211_shutdown_all_interfaces+0x71/0xd0 [cfg80211] ieee80211_reconfig+0xa2/0x1700 [mac80211] ieee80211_restart_work+0xb7/0xe0 [mac80211] process_one_work+0x1d4/0x3c0 worker_thread+0x228/0x470 ? process_one_work+0x3c0/0x3c0 kthread+0x19c/0x1c0 ? __kthread_init_worker+0x30/0x30 ret_from_fork+0x35/0x40 Fixes: 7bc04215a66b ("mt76: add driver code for MT76x2e") Tested-by: Oleksandr Natalenko <oleksandr@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x02: fix handling MCU timeouts during hw restartFelix Fietkau1-0/+1
If a MCU timeout occurs before a hw restart completes, another hw restart is scheduled, and the station state gets corrupted. To speed up dealing with that, do not issue any MCU commands after the first timeout, and defer handling timeouts until the reset has completed. Also ignore errors in MCU commands during start/config to avoid making user space fail on this condition. If it happens, another restart is scheduled quickly, and that usually recovers the hardware properly. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move state from struct mt76_dev to mt76_phyFelix Fietkau1-1/+1
Allows keeping per-wiphy state separate Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move channel state to struct mt76_phyFelix Fietkau1-2/+2
Add support for an extra wiphy in mt76_set_channel and mt76_get_survey This is preparation for supporting multiple wiphys per device to support the concurrent dual-band feature of MT7615D Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02: move MT_CH_TIME_CFG init to mt76x02_mac_cc_resetFelix Fietkau1-9/+0
Reduces code duplication and adds missing bits for USB variants Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x2: move mt76x02_mac_reset_counters in mt76x02_mac_startLorenzo Bianconi1-11/+2
Move mt76x02_mac_reset_counters in mt76x02_mac_start and get rid of mt76x2_mac_start since it is just a wrapper for mt76x02_mac_start Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02: move mac_reset_counter in mt76x02_lib moduleLorenzo Bianconi1-9/+1
Unify mac_reset_counter routine and move it in mt76x02_lib module since it is shared by all mt76x02 drivers (pci/usb) Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: switch to SPDX tag instead of verbose boilerplate textRyder Lee1-12/+1
No functional change intended. Add SPDX identifiers to all remaining files in /mt76. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x02: fix some checkpatch warningsRyder Lee1-1/+0
This fixes the following checkpatch warnings: ERROR: code indent should use tabs where possible CHECK: Alignment should match open parenthesis CHECK: No space is necessary after a cast CHECK: Please don't use multiple blank lines CHECK: Avoid precedence issues in macro WARNING: Statements should start on a tabstop WARNING: Unnecessary space before function pointer arguments Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: move pre_tbtt_tasklet in mt76_devLorenzo Bianconi1-1/+1
Move pre_tbtt_tasklet tasklet in mt76_dev data structure since it is used by all drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: move mac_work in mt76_devLorenzo Bianconi1-1/+1
Move mac_work delayed work in mt76_dev data structure since it is used by all drivers and it will be reused adding mac work to mt7615 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02: introduce mt76x02_beacon.cStanislaw Gruszka1-1/+1
Move most of beaconing code into separate file and separate beacon initialization for USB and MMIO as pre TBTT implementation for USB will be different. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-03-07mt76: mt76x2: implement full device restart on watchdog resetFelix Fietkau1-1/+1
Restart the firmware and re-initialize the MAC to be able to recover from more kinds of hang states Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-26mt76: mt76x2: unify mt76x2[u]_mac_resumeFelix Fietkau1-7/+0
They are now the same and short enough to be turned into an inline function Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x2: remove mt76x2_alloc_device routineLorenzo Bianconi1-26/+0
Remove mt76x2_alloc_device since it just runs mt76_alloc_device. Move mt76_alloc_device call in mt76x2_probe Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: move alloc_device common code in mt76_alloc_deviceLorenzo Bianconi1-3/+2
Move mt76x{0,2} alloc_device common code in mt76_alloc_device and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02: initialize mutli bss mode when set up addressStanislaw Gruszka1-3/+1
BSSID is not strtirct related with beaconing (for example we can have 2 STA vifs) and more related with MAC address, so initaize BSSID when setting MAC address. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-11mt76: add led support to mt76x0e driverLorenzo Bianconi1-54/+0
Move mt76x02 led support in mt76x02-lib module in order to add tpt led trigger to mt76x0e driver Tested-by: LGA1150 <dqfext@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-11mt76: mmio: introduce mt76x02_check_tx_hang watchdogLorenzo Bianconi1-0/+1
Port mt76x02_check_tx_hang watchdog from vendor driver in order to perform a device reset when tx mac/dma logic hangs. Tx mac/dma stuck has been observed when the device is heavy loaded or in a noisy environment. Moreover introduce wdt delayed work in order to run tx_hang watchdog. For the moment run mt76x02_check_tx_hang watchdog just on mt76x2 devices since the issue has not been observed on mt76x0 driver yet Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-11mt76: add energy detect CCA support to mt76x{0,2}e driversLorenzo Bianconi1-0/+1
Ported from the reference driver. Should fix compliance with ETSI regulatories on preventing transmission while energy detect values are above the threshold. The code has been tested using an ath9k device running tx99 as noise generator Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-11mt76x2: add static qualifier to mt76x2_init_hardwareLorenzo Bianconi1-1/+1
Add static qualifier to mt76x2_init_hardware routine since it is used just in pci_init.c Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-12-13Merge tag 'mt76-for-kvalo-2018-11-30' of https://github.com/nbd168/wirelessKalle Valo1-119/+15
first batch of mt76 patches for 4.21 * use the same firmware for mt76x2e and mt76x2u * mt76x2 fixes * mt76x0 fixes * mt76x0e survey support * more unification between mt76x2 and mt76x0 * mt76x0e AP mode support * mt76x0e DFS support * rework and fix tx status handling for mt76x0 and mt76x2 kvalo: fixed a conflict in drivers/net/wireless/mediatek/mt76/mt76x2/pci_main.c and a build problem in drivers/net/wireless/mediatek/mt76/mt76x02_util.c
2018-11-30mt76: replace sta_add/remove ops with common sta_state functionFelix Fietkau1-0/+2
Allows adding unassociated stations from mac80211 Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
2018-11-30mt76x0: pci: enable VHT rates in IBSS modeLorenzo Bianconi1-3/+0
Enable VHT tx rates in ad-hoc mode for mt76x0e driver. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: introduce mt76x02_config_mac_addr_list routineLorenzo Bianconi1-15/+2
Add mt76x02_config_mac_addr_list routine in order to set the mac address list supported by the driver. Initialize wiphy->addresses/n_addresses for mt76x0e driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: remove wait argument from mt76x02_mcu_set_radio_stateStanislaw Gruszka1-1/+1
Remove wait argument from mt76x02_mcu_set_radio_state and newer wait for response when sending CMD_POWER_SAVING_OP mcu command. Note this change behaviour for PCIe devices, but the change is in align with vendor driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x2: move wcid_tx_rate conf at bootstrapLorenzo Bianconi1-1/+4
Move WCID tx rate configuration at device bootstrap since the related register are always set to 0 Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: pci: add DFS supportLorenzo Bianconi1-7/+0
Introduce dfs support in mt76x0e driver and unlock radar channels Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move dfs support in mt76x02-lib moduleLorenzo Bianconi1-11/+2
Move mt76x2 DFS support in mt76x02-lib module in order to be reused by mt76x0 driver and unlock DFS frequencies Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move mt76x02_set_tx_ackto in mt76x02-lib moduleLorenzo Bianconi1-18/+1
Move mt76x02_set_tx_ackto and mt76x02_set_coverage_class routines in mt76x02-lib module in order to be reused by mt76x0 driver. This is a preliminary patch to unify drv_bss_info_changed mac80211 callback between mt76x0 and mt76x2 drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: introduce mt76x02_init_beacon_config routineLorenzo Bianconi1-18/+1
Add mt76x02_init_beacon_config utility routine in mt76x02-lib module in order to be reused by mt76x0 driver configuring BSSID registers and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move mt76x02_sta_ps in mt76x02-lib moduleLorenzo Bianconi1-1/+1
Move mt76x02_sta_ps utility routine in mt76x02_util.c in order to be reused by mt76x0 driver adding AP support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: pci: add pre_tbtt_tasklet supportLorenzo Bianconi1-3/+0
Enable/disable pre_tbtt_tasklet in mt76x0 driver in order to add AP support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move tx beacon routines in mt76x02-lib moduleLorenzo Bianconi1-1/+1
Move mt76x02_tx beacon utility routines in mt76x02_mmio.c in order to be reused by mt76x0 driver adding AP support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move mac beacon routines in mt76x02-lib moduleLorenzo Bianconi1-2/+2
Move mt76x02_beacon mac routines in mt76x02_mac.c in order to be reused by mt76x0 driver adding AP support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move mt76x02_init_device in mt76x02-lib moduleLorenzo Bianconi1-40/+1
Move mt76x02_init_device routine in mt76x02_util.c in order to be reused by mt76x0 driver and remove duplicated code. Move interface combo definition supported by the driver in mt76x02_init_device routine Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x2u: introduce mac workqueue supportLorenzo Bianconi1-1/+0
Add mac workqueue support to mt76x2u driver in order to compute device statistics and add mac stuck routine Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move mt76x02_debugfs in mt76x02-lib moduleLorenzo Bianconi1-1/+1
Move mt76x02_debugfs in mt76x02-lib module in order to be reused by mt76x0 driver and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move mt76x02_mac_work routine in mt76x02-lib moduleLorenzo Bianconi1-1/+1
Move mt76x02_mac_work routine in mt76x02_mac.c in order to be reused by mt76x0 driver to read device statistics Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: pci: add get_survey supportLorenzo Bianconi1-1/+1
Move mt76x02_update_channel routine in mt76x02-lib module in order to be reused by mt76x0 driver adding get_survey support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-06mt76: fix building without CONFIG_LEDS_CLASSArnd Bergmann1-2/+4
When CONFIG_LEDS_CLASS is disabled, or it is a loadable module while mt76 is built-in, we run into a link error: drivers/net/wireless/mediatek/mt76/mac80211.o: In function `mt76_register_device': mac80211.c:(.text+0xb78): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `devm_of_led_classdev_register' We don't really need a hard dependency here as the driver can presumably work just fine without LEDs, so this follows the iwlwifi example and adds a separate Kconfig option for the LED support, this will be available whenever it will link, and otherwise the respective code gets left out from the driver object. Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.cLorenzo Bianconi1-3/+3
Use mt76x02_dev data structure as reference in mt76x02_eeprom.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.cLorenzo Bianconi1-3/+3
Use mt76x02_dev data structure as reference in mt76x02_mac.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_util.cLorenzo Bianconi1-1/+1
Use mt76x02_dev data structure as reference in mt76x02_util.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.cLorenzo Bianconi1-2/+2
Use mt76x02_dev data structure as reference in mt76x02_mcu.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: move irq handler in mt76x02-lib moudleLorenzo Bianconi1-1/+1
Move mt76x02_irq_handler handler in mt76x02_mmio.c in order to be reused in mt76x0 driver. Move mt76x02_rx_poll_complete routine in mt76x02-lib module. Moreover remove pci_core.c and mt76x2/trace.{c,h} since are empty files Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.