aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2018-11-30mt76x0: pci: add missing MODULE_FIRMWARE macroLorenzo Bianconi3-3/+5
Add missing firmware declaration for mt76x0e driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: init: simplify mt76x0_init_mac_registersLorenzo Bianconi1-17/+10
Simplify mt76x0_init_mac_registers routine using mt76_set, mt76_clear and mt76_rmw utility routines Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: antenna select correctionsStanislaw Gruszka2-17/+43
Update mt76x0_phy_ant_select() to conform vendor driver, most notably add dual antenna mode support, read configuration from EEPROM and move ant select out of channel config to init phase. Plus small MT7630E quirk for MT_CMB_CTRL register which vendor driver dedicated to this chip do. This make MT7630E workable with mt76x0e driver and do not cause any problems on MT7610U for me. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: usb: fix static tracepointsLorenzo Bianconi10-347/+38
Add submit_urb and rx_urb static tracepoints in mt76-usb module. Move trace_mac_txstat_fetch in mt76x02_mac_load_tx_status routine in order to be available to usb drivers. Moreover remove no longer used mt76x0/trace.{c,h} Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: mt76x0: handle chip specific initval differencesFelix Fietkau2-4/+49
Some RF registers need different values for various chips. For at least mt76x0_rf_central_tab registers, overwriting them later does not work, as the wrong values can cause the entire system to hang on some devices with MT7610E Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: clean up unused leftover EXPORT_SYMBOLsFelix Fietkau6-18/+3
Make previously exported functions static where possible Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: do not perform MCU calibration for MT7630Stanislaw Gruszka2-0/+8
Driver works better for MT7630 without MCU calibration, which looks like it can hangs the firmware. Vendor driver do not perform it for MT7630 as well. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: phy: unify calibration between mt76x0u and mt76x0eLorenzo Bianconi4-84/+4
Align phy calibration logic between mt76x0u and mt76x0e drivers This patch improves connection stability with low SNR Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x2u: introduce mac workqueue supportLorenzo Bianconi4-1/+5
Add mac workqueue support to mt76x2u driver in order to compute device statistics and add mac stuck routine Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: use mt76x02_mac_work as stats handlerLorenzo Bianconi5-81/+20
Use mt76x02_mac_work utility routine as stats workqueue handler and remove duplicated code. Moreover run mac stuck check in mt76x02_mac_work for client interfaces. Remove no longer used avg_ampdu_len and mt76x02_mac_stats data structure in mt76x02_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: use shared debugfs implementationLorenzo Bianconi4-92/+3
Use mt76x02 debugfs implementation and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move mt76x02_debugfs in mt76x02-lib moduleLorenzo Bianconi7-16/+17
Move mt76x02_debugfs in mt76x02-lib module in order to be reused by mt76x0 driver and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move mt76x02_mac_work routine in mt76x02-lib moduleLorenzo Bianconi8-25/+23
Move mt76x02_mac_work routine in mt76x02_mac.c in order to be reused by mt76x0 driver to read device statistics Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: pci: add get_survey supportLorenzo Bianconi8-21/+30
Move mt76x02_update_channel routine in mt76x02-lib module in order to be reused by mt76x0 driver adding get_survey support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: phy: improve code readability in initvals_phy.hLorenzo Bianconi1-722/+591
Improve initvals_phy.h code readability (there are no actual changes of original values) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: phy: simplify rf configuration routinesLorenzo Bianconi2-143/+105
Simplify mt76x0_phy_vco_cal and mt76x0_phy_set_chan_rf_params routines using mt76x0_rf_wr, mt76x0_rf_set and mt76x0_rf_clear helper routines. Moreover over get rid of magic numbers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: phy: use proper name conventionLorenzo Bianconi3-113/+113
Use mt76x0_phy as prefix for routines in mt76x0/phy.c Moreover use mt76x0_rf_set to enable vco calibration in mt76x0_phy_vco_cal Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x2u: align channel gain logic to mt76x2 oneLorenzo Bianconi8-177/+114
Update vga tuning algorithm to the one used in mt76x2 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x2: align mt76x2 and mt76x2u firmwareLorenzo Bianconi3-7/+4
Unify firmware version used on mt76x2e and mt76x2u drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-29brcmfmac: Fix out of bounds memory access during fw loadLyude Paul1-2/+6
I ended up tracking down some rather nasty issues with f2fs (and other filesystem modules) constantly crashing on my kernel down to a combination of out of bounds memory accesses, one of which was coming from brcmfmac during module load: [ 30.891382] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2 [ 30.894437] ================================================================== [ 30.901581] BUG: KASAN: global-out-of-bounds in brcmf_fw_alloc_request+0x42c/0x480 [brcmfmac] [ 30.909935] Read of size 1 at addr ffff2000024865df by task kworker/6:2/387 [ 30.916805] [ 30.918261] CPU: 6 PID: 387 Comm: kworker/6:2 Tainted: G O 4.20.0-rc3Lyude-Test+ #19 [ 30.927251] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018 [ 30.935964] Workqueue: events brcmf_driver_register [brcmfmac] [ 30.941641] Call trace: [ 30.944058] dump_backtrace+0x0/0x3e8 [ 30.947676] show_stack+0x14/0x20 [ 30.950968] dump_stack+0x130/0x1c4 [ 30.954406] print_address_description+0x60/0x25c [ 30.959066] kasan_report+0x1b4/0x368 [ 30.962683] __asan_report_load1_noabort+0x18/0x20 [ 30.967547] brcmf_fw_alloc_request+0x42c/0x480 [brcmfmac] [ 30.967639] brcmf_sdio_probe+0x163c/0x2050 [brcmfmac] [ 30.978035] brcmf_ops_sdio_probe+0x598/0xa08 [brcmfmac] [ 30.983254] sdio_bus_probe+0x190/0x398 [ 30.983270] really_probe+0x2a0/0xa70 [ 30.983296] driver_probe_device+0x1b4/0x2d8 [ 30.994901] __driver_attach+0x200/0x280 [ 30.994914] bus_for_each_dev+0x10c/0x1a8 [ 30.994925] driver_attach+0x38/0x50 [ 30.994935] bus_add_driver+0x330/0x608 [ 30.994953] driver_register+0x140/0x388 [ 31.013965] sdio_register_driver+0x74/0xa0 [ 31.014076] brcmf_sdio_register+0x14/0x60 [brcmfmac] [ 31.023177] brcmf_driver_register+0xc/0x18 [brcmfmac] [ 31.023209] process_one_work+0x654/0x1080 [ 31.032266] worker_thread+0x4f0/0x1308 [ 31.032286] kthread+0x2a8/0x320 [ 31.039254] ret_from_fork+0x10/0x1c [ 31.039269] [ 31.044226] The buggy address belongs to the variable: [ 31.044351] brcmf_firmware_path+0x11f/0xfffffffffffd3b40 [brcmfmac] [ 31.055601] [ 31.057031] Memory state around the buggy address: [ 31.061800] ffff200002486480: 04 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 [ 31.068983] ffff200002486500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 31.068993] >ffff200002486580: 00 00 00 00 00 00 00 00 fa fa fa fa 00 00 00 00 [ 31.068999] ^ [ 31.069017] ffff200002486600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 31.096521] ffff200002486680: 00 00 00 00 00 00 00 00 00 00 00 00 fa fa fa fa [ 31.096528] ================================================================== [ 31.096533] Disabling lock debugging due to kernel taint It appears that when trying to determine the length of the string in the alternate firmware path, we make the mistake of not handling the case where the firmware path is empty correctly. Since strlen(mp_path) can return 0, we'll end up accessing mp_path[-1] when the firmware_path isn't provided through the module arguments. So, fix this by just setting the end char to '\0' by default, and only changing it if we have a non-zero length. Additionally, use strnlen() with BRCMF_FW_ALTPATH_LEN instead of strlen() just to be extra safe. Fixes: 2baa3aaee27f ("brcmfmac: introduce brcmf_fw_alloc_request() function") Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Arend Van Spriel <arend.vanspriel@broadcom.com> Cc: Himanshu Jha <himanshujha199640@gmail.com> Cc: Dan Haab <dhaab@luxul.com> Cc: Jia-Shyr Chuang <saint.chuang@cypress.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-29brcmfmac: Call brcmf_dmi_probe before brcmf_of_probeHans de Goede1-1/+1
ARM systems with UEFI may have both devicetree (of) and DMI data in this case we end up setting brcmf_mp_device.board_type twice. In this case we should prefer the devicetree data, because: 1) The devicerree data is more reliable 2) Some ARM systems (e.g. the Raspberry Pi 3 models) support both UEFI and classic uboot booting, the devicetree data is always there, so using it makes sure we ask for the same nvram file independent of how we booted. This commit moves the brcmf_dmi_probe call to before the brcmf_of_probe call, so that the latter can override the value of the first if both are set. Fixes: bd1e82bb420a ("brcmfmac: Set board_type from DMI on x86 based ...") Cc: Peter Robinson <pbrobinson@gmail.com> Tested-and-reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-29brcmfmac: support STA info struct v7Dan Haab1-7/+33
The newest firmwares provide STA info using v7 of the struct. As v7 isn't backward compatible, a union is needed. Even though brcmfmac does not use any of the new info it's important to provide the proper struct buffer. Without this change new firmwares will fallback to the very limited v3 instead of something in between such as v4. Signed-off-by: Dan Haab <dan.haab@luxul.com> Reviewed-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-29b43: Use cordic algorithm from kernel libraryPriit Laes5-68/+15
Kernel library has a common cordic algorithm which is identical to internally implemented one, so use it and drop the duplicate implementation. Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-29b43: Fix error in cordic routineLarry Finger1-1/+1
The cordic routine for calculating sines and cosines that was added in commit 6f98e62a9f1b ("b43: update cordic code to match current specs") contains an error whereby a quantity declared u32 can in fact go negative. This problem was detected by Priit Laes who is switching b43 to use the routine in the library functions of the kernel. Fixes: 986504540306 ("b43: make cordic common (LP-PHY and N-PHY need it)") Reported-by: Priit Laes <plaes@plaes.org> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Stable <stable@vger.kernel.org> # 2.6.34 Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-29brcmsmac: Use cordic-related macros from common cordic libraryPriit Laes3-11/+4
Current driver includes macro that is available from general cordic library. Use that and drop unused duplicate and unneeded internal definitions. Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller16-38/+82
2018-11-23iwlwifi: mvm: set HW capability VHT_EXT_NSS_BWShaul Triebitz1-0/+1
Enable the VHT extended NSS BW feature in iwlwifi/mvm. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: mvm: send the STA_HE_CTXT command in AP modeShaul Triebitz1-0/+3
In AP mode, if AP supports HE (and the STA), send the STA_HE_CTXT command. This is needed mainly for PPE (packet extension) params. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: mvm: set MAC_FILTER_IN_11AX in AP modeShaul Triebitz1-0/+3
In AP mode, if AP supports 11ax, add the MAC_FILTER_IN_11AX flag in MAC_CTXT command (needed for various 11ax stuff). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: fw: support API change to debug TLVsSara Sharon1-0/+2
A new field was added. Since the code isn't operational (yet) no need to worry about backward compatibility. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: add debugfs file to read fw debug data recordingLior Cohen6-0/+228
FW debug data will oneshot read all data available in DRAM and fill the supplied user buffer. In case the read request is greater than the new data in DRAM, the driver will write all data it has and return the buffer immediately. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Lior Cohen <lior2.cohen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: dbg: add apply point logicSara Sharon6-2/+244
Add a function to be called when apply point occurs. For each of the TLVs, the function will perform the apply point logic: - For HCMD - send the stored host command - For buffer allocation - allocate the memory and send the buffer allocation command - For trigger and region - update the stored configuration Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: dbg: disable triggers for iniSara Sharon4-0/+9
When ini is loaded, disable all legacy trigger configuration. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: trans: support loading ini TLVs from external fileSara Sharon4-11/+89
Support loading and storing ini TLVs from external file. Those TLVs are appended to the default TLVs, so store them separately. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: trans: parse and store debug ini TLVsSara Sharon7-0/+269
The new debug ini TLVs can be either packed into firmware binary or written in external file. Support loading them from both. Store the data per apply point. Apply point is a point during driver runtime, where the TLV becomes active. For example, a trigger of hardware error may be configured to collect a subset of data pre-alive, as a opposed to HW error that occurs after alive. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: fw: add FW API of new TLV infrastructureSara Sharon1-0/+399
Add the FW API of the new debug infrastructure. Next patches will introduce the utilization of this infra. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: mvm: add support for TWT capabilitiesEmmanuel Grumbach2-5/+35
We need to check the TWT support of the peer and to propagte the capability to the firmware. The current implementation will enable TWT only if the TWT support is advertised in the HE CAP IE and in the Extended Capability IE. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: add fw dump upon RT ucode start failureLior Cohen3-0/+11
FW dump was missing in case the RT FW ucode section failed to load. This failure happens when the RT section of the FW file is corrupted. Signed-off-by: Lior Cohen <lior2.cohen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: fix cfg structs for 22000 with different RF modulesLuca Coelho3-4/+21
We have to choose different configuration and different firmwares depending on the external RF module that is installed. Since the external module is not represented in the PCI IDs, we need to change the configuration at runtime, after checking the RF ID of the module installed. We have a bit of a mess in the code that does this, because it applies cfg's according to the RF ID only, ignoring the integrated module that is in use. Fix that for some devices by adding correct configurations for them and not ignoring the integrated module's type when making the decision. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: mvm: remove assignment of the reciprocalEmmanuel Grumbach2-29/+10
The firmware stopped looking at this field long ago. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: dbg: split fifos dumpSara Sharon1-13/+39
Split the dump of RXF and TXF. This is in order to enable code reuse for INI, which may decide to dump only RXF and not TXF, and vice versa. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: dbg: don't limit dump decisions to all or monitorSara Sharon4-24/+22
Currently opmode is limited to asking transport to either dump all the dumps configured at startup, or monitor only. Instead, pass to transport a bitmask, to allow flexibility. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-20crypto: drop mask=CRYPTO_ALG_ASYNC from 'shash' tfm allocationsEric Biggers1-4/+2
'shash' algorithms are always synchronous, so passing CRYPTO_ALG_ASYNC in the mask to crypto_alloc_shash() has no effect. Many users therefore already don't pass it, but some still do. This inconsistency can cause confusion, especially since the way the 'mask' argument works is somewhat counterintuitive. Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags. This patch shouldn't change any actual behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-20crypto: drop mask=CRYPTO_ALG_ASYNC from 'cipher' tfm allocationsEric Biggers1-1/+1
'cipher' algorithms (single block ciphers) are always synchronous, so passing CRYPTO_ALG_ASYNC in the mask to crypto_alloc_cipher() has no effect. Many users therefore already don't pass it, but some still do. This inconsistency can cause confusion, especially since the way the 'mask' argument works is somewhat counterintuitive. Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags. This patch shouldn't change any actual behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16mt76: fix uninitialized mutex access setting rts thresholdLorenzo Bianconi2-3/+2
Fix following crash due to a leftover uninitialized mutex access in mt76x2_set_rts_threshold routine. [ 31.018059] Call Trace: [ 31.018341] register_lock_class+0x51f/0x530 [ 31.018828] __lock_acquire+0x6c/0x1580 [ 31.019247] lock_acquire+0x88/0x120 [ 31.021089] __mutex_lock+0x4a/0x4f0 [ 31.023343] mt76x2_set_rts_threshold+0x28/0x50 [ 31.023831] ieee80211_set_wiphy_params+0x16d/0x4e0 [ 31.024344] nl80211_set_wiphy+0x72b/0xbc0 [ 31.024781] genl_family_rcv_msg+0x192/0x3a0 [ 31.025233] genl_rcv_msg+0x42/0x89 [ 31.026079] netlink_rcv_skb+0x38/0x100 [ 31.026475] genl_rcv+0x1f/0x30 [ 31.026804] netlink_unicast+0x19c/0x250 [ 31.027212] netlink_sendmsg+0x1ed/0x390 [ 31.027615] sock_sendmsg+0x31/0x40 [ 31.027973] ___sys_sendmsg+0x23c/0x280 [ 31.030414] __sys_sendmsg+0x42/0x80 [ 31.030783] do_syscall_64+0x4a/0x170 [ 31.031160] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 31.031677] RIP: 0033:0x7f3498b39ba7 [ 31.033953] RSP: 002b:00007fffe19675b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 31.034883] RAX: ffffffffffffffda RBX: 00000000012d5350 RCX: 00007f3498b39ba7 [ 31.035756] RDX: 0000000000000000 RSI: 00007fffe19675f0 RDI: 0000000000000003 [ 31.036587] RBP: 00000000012da740 R08: 0000000000000002 R09: 0000000000000000 [ 31.037422] R10: 0000000000000006 R11: 0000000000000246 R12: 00000000012da880 [ 31.038252] R13: 00007fffe19675f0 R14: 00007fffe19678c0 R15: 00000000012da880 Fixes: 108a4861ef19 ("mt76: create new mt76x02-lib module for common mt76x{0,2} code") Reported-by: lorenzo.trisolini@fluidmesh.com Reported-by: luca.bisti@fluidmesh.com Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-16brcmfmac: fix reporting support for 160 MHz channelsRafał Miłecki1-1/+2
Driver can report IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ so it's important to provide valid & complete info about supported bands for each channel. By default no support for 160 MHz should be assumed unless firmware reports it for a given channel later. This fixes info passed to the userspace. Without that change userspace could try to use invalid channel and fail to start an interface. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-16ath10k: don't assume 'vif' is non-NULL in flush()Brian Norris1-1/+1
mac80211 may call us with vif == NULL, if the station is not currently active (e.g., not associated). It is trivially easy to reproduce a crash by suspending the system when not connected to an AP: [ 65.533934] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... [ 65.574521] pc : ath10k_flush+0x30/0xd0 [ath10k_core] [ 65.574538] lr : __ieee80211_flush_queues+0x180/0x244 [mac80211] [ 65.599680] Process kworker/u12:1 (pid: 57, stack limit = 0x(____ptrval____)) [ 65.599682] Call trace: [ 65.599695] ath10k_flush+0x30/0xd0 [ath10k_core] [ 65.642064] __ieee80211_flush_queues+0x180/0x244 [mac80211] [ 65.642079] ieee80211_flush_queues+0x34/0x40 [mac80211] [ 65.642095] __ieee80211_suspend+0xfc/0x47c [mac80211] [ 65.658611] ieee80211_suspend+0x30/0x3c [mac80211] [ 65.658627] wiphy_suspend+0x15c/0x3a8 [cfg80211] [ 65.672810] dpm_run_callback+0xf0/0x1f0 [ 65.672814] __device_suspend+0x3ac/0x4f8 [ 65.672819] async_suspend+0x34/0xbc [ 65.684096] async_run_entry_fn+0x54/0x104 [ 65.684099] worker_thread+0x4cc/0x72c [ 65.684102] kthread+0x134/0x13c [ 65.684105] ret_from_fork+0x10/0x18 Fixes: 9de4162f0999 ("ath10k: add peer flush in ath10k_flush for STATION") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-15iwlwifi: mvm: don't use SAR Geo if basic SAR is not usedLuca Coelho1-8/+28
We can't use SAR Geo if basic SAR is not enabled, since the SAR Geo tables define offsets in relation to the basic SAR table in use. To fix this, make iwl_mvm_sar_init() return one in case WRDS is not available, so we can skip reading WGDS entirely. Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-15iwlwifi: fix D3 debug data buffer memory leakShahar S Matityahu2-1/+7
If the driver is unloaded when D3 debug data pulling is enabled but not triggered, it doesn't release the data buffer. Fix this by adding iwl_fw_runtime_free and calling it from the relevant places. Fixes: 2d8c261511ab ("iwlwifi: add d3 debug data support") Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-15iwlwifi: mvm: fix regulatory domain update when the firmware startsEmmanuel Grumbach2-5/+8
When the firmware starts, it doesn't have any regulatory information, hence it uses the world wide limitations. The driver can feed the firmware with previous knowledge that was kept in the driver, but the firmware may still not update its internal tables. This happens when we start a BSS interface, and then the firmware can change the regulatory tables based on our location and it'll use more lenient, location specific rules. Then, if the firmware is shut down (when the interface is brought down), and then an AP interface is created, the firmware will forget the country specific rules. The host will think that we are in a certain country that may allow channels and will try to teach the firmware about our location, but the firmware may still not allow to drop the world wide limitations and apply country specific rules because it was just re-started. In this case, the firmware will reply with MCC_RESP_ILLEGAL to the MCC_UPDATE_CMD. In that case, iwlwifi needs to let the upper layers (cfg80211 / hostapd) know that the channel list they know about has been updated. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201105 Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.