aboutsummaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/bpf/test_progs.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-09selftests/bpf: Deduplicate write_sysctl() to test_progs.cYiFei Zhu1-0/+17
This helper is needed in multiple tests. Instead of copying it over and over, better to deduplicate this helper to test_progs.c. test_progs.c is chosen over testing_helpers.c because of this helper's use of CHECK / ASSERT_*, and the CHECK was modified to use ASSERT_* so it does not rely on a duration variable. Suggested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: YiFei Zhu <zhuyifei@google.com> Link: https://lore.kernel.org/r/9b4fc9a27bd52f771b657b4c4090fc8d61f3a6b5.1662682323.git.zhuyifei@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2022-07-29selftests/bpf: Bump internal send_signal/send_signal_tracepoint timeoutDaniel Müller1-5/+2
The send_signal/send_signal_tracepoint is pretty flaky, with at least one failure in every ten runs on a few attempts I've tried it: > test_send_signal_common:PASS:pipe_c2p 0 nsec > test_send_signal_common:PASS:pipe_p2c 0 nsec > test_send_signal_common:PASS:fork 0 nsec > test_send_signal_common:PASS:skel_open_and_load 0 nsec > test_send_signal_common:PASS:skel_attach 0 nsec > test_send_signal_common:PASS:pipe_read 0 nsec > test_send_signal_common:PASS:pipe_write 0 nsec > test_send_signal_common:PASS:reading pipe 0 nsec > test_send_signal_common:PASS:reading pipe error: size 0 0 nsec > test_send_signal_common:FAIL:incorrect result unexpected incorrect result: actual 48 != expected 50 > test_send_signal_common:PASS:pipe_write 0 nsec > #139/1 send_signal/send_signal_tracepoint:FAIL The reason does not appear to be a correctness issue in the strict sense. Rather, we merely do not receive the signal we are waiting for within the provided timeout. Let's bump the timeout by a factor of ten. With that change I have not been able to reproduce the failure in 150+ iterations. I am also sneaking in a small simplification to the test_progs test selection logic. Signed-off-by: Daniel Müller <deso@posteo.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220727182955.4044988-1-deso@posteo.net
2022-05-20selftests/bpf: Remove filtered subtests from outputMykola Lysenko1-2/+6
Currently filtered subtests show up in the output as skipped. Before: $ sudo ./test_progs -t log_fixup/missing_map #94 /1 log_fixup/bad_core_relo_trunc_none:SKIP #94 /2 log_fixup/bad_core_relo_trunc_partial:SKIP #94 /3 log_fixup/bad_core_relo_trunc_full:SKIP #94 /4 log_fixup/bad_core_relo_subprog:SKIP #94 /5 log_fixup/missing_map:OK #94 log_fixup:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED After: $ sudo ./test_progs -t log_fixup/missing_map #94 /5 log_fixup/missing_map:OK #94 log_fixup:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220520061303.4004808-1-mykolal@fb.com
2022-05-20selftests/bpf: Fix subtest number formatting in test_progsMykola Lysenko1-3/+9
Remove weird spaces around / while preserving proper indentation Signed-off-by: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Daniel Müller <deso@posteo.net> Link: https://lore.kernel.org/bpf/20220520070144.10312-1-mykolal@fb.com
2022-04-28selftests/bpf: Fix two memory leaks in prog_testsMykola Lysenko1-6/+11
Fix log_fp memory leak in dispatch_thread_read_log. Remove obsolete log_fp clean-up code in dispatch_thread. Also, release memory of subtest_selector. This can be reproduced with -n 2/1 parameters. Signed-off-by: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220428225744.1961643-1-mykolal@fb.com
2022-04-27bpf/selftests: Add granular subtest output for prog_testMykola Lysenko1-168/+458
Implement per subtest log collection for both parallel and sequential test execution. This allows granular per-subtest error output in the 'All error logs' section. Add subtest log transfer into the protocol during the parallel test execution. Move all test log printing logic into dump_test_log function. One exception is the output of test names when verbose printing is enabled. Move test name/result printing into separate functions to avoid repetition. Print all successful subtest results in the log. Print only failed test logs when test does not have subtests. Or only failed subtests' logs when test has subtests. Disable 'All error logs' output when verbose mode is enabled. This functionality was already broken and is causing confusion. Signed-off-by: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220427041353.246007-1-mykolal@fb.com
2022-04-18selftests/bpf: Refactor prog_tests logging and test executionMykola Lysenko1-211/+117
This is a pre-req to add separate logging for each subtest in test_progs. Move all the mutable test data to the test_result struct. Move per-test init/de-init into the run_one_test function. Consolidate data aggregation and final log output in calculate_and_print_summary function. As a side effect, this patch fixes double counting of errors for subtests and possible duplicate output of subtest log on failures. Also, add prog_tests_framework.c test to verify some of the counting logic. As part of verification, confirmed that number of reported tests is the same before and after the change for both parallel and sequential test execution. Signed-off-by: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220418222507.1726259-1-mykolal@fb.com
2022-04-10selftests/bpf: Improve by-name subtest selection logic in prog_testsMykola Lysenko1-83/+74
Improve subtest selection logic when using -t/-a/-d parameters. In particular, more than one subtest can be specified or a combination of tests / subtests. -a send_signal -d send_signal/send_signal_nmi* - runs send_signal test without nmi tests -a send_signal/send_signal_nmi*,find_vma - runs two send_signal subtests and find_vma test -a 'send_signal*' -a find_vma -d send_signal/send_signal_nmi* - runs 2 send_signal test and find_vma test. Disables two send_signal nmi subtests -t send_signal -t find_vma - runs two *send_signal* tests and one *find_vma* test This will allow us to have granular control over which subtests to disable in the CI system instead of disabling whole tests. Also, add new selftest to avoid possible regression when changing prog_test test name selection logic. Signed-off-by: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220409001750.529930-1-mykolal@fb.com
2022-04-03selftests/bpf: Fix cd_flavor_subdir() of test_progsYuntao Wang1-2/+4
Currently, when we run test_progs with just executable file name, for example 'PATH=. test_progs-no_alu32', cd_flavor_subdir() will not check if test_progs is running as a flavored test runner and switch into corresponding sub-directory. This will cause test_progs-no_alu32 executed by the 'PATH=. test_progs-no_alu32' command to run in the wrong directory and load the wrong BPF objects. Signed-off-by: Yuntao Wang <ytcoode@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220403135245.1713283-1-ytcoode@gmail.com
2021-12-14selftests/bpf: Remove explicit setrlimit(RLIMIT_MEMLOCK) in main selftestsAndrii Nakryiko1-2/+0
As libbpf now is able to automatically take care of RLIMIT_MEMLOCK increase (or skip it altogether on recent enough kernels), remove explicit setrlimit() invocations in bench, test_maps, test_verifier, and test_progs. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211214195904.1785155-3-andrii@kernel.org
2021-11-16selftests/bpf: Mark variable as staticYucong Sun1-2/+2
Fix warnings from checkstyle.pl Signed-off-by: Yucong Sun <sunyucong@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211112192535.898352-4-fallentree@fb.com
2021-11-16selftests/bpf: Variable naming fixYucong Sun1-8/+8
Change log_fd to log_fp to reflect its type correctly. Signed-off-by: Yucong Sun <sunyucong@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211112192535.898352-3-fallentree@fb.com
2021-11-16selftests/bpf: Move summary line after the error logsYucong Sun1-4/+4
Makes it easier to find the summary line when there is a lot of logs to scroll back. Signed-off-by: Yucong Sun <sunyucong@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211112192535.898352-2-fallentree@fb.com
2021-10-29selftests/bpf: Fix fclose/pclose mismatch in test_progsAndrea Righi1-2/+2
Make sure to use pclose() to properly close the pipe opened by popen(). Fixes: 81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID") Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20211026143409.42666-1-andrea.righi@canonical.com
2021-10-08selftests/bpf: Allow some tests to be executed in sequenceYucong Sun1-6/+54
This patch allows tests to define serial_test_name() instead of test_name(), and this will make test_progs execute those in sequence after all other tests finished executing concurrently. Signed-off-by: Yucong Sun <sunyucong@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211006185619.364369-3-fallentree@fb.com
2021-10-08selftests/bpf: Add parallelism to test_progsYucong Sun1-36/+575
This patch adds "-j" mode to test_progs, executing tests in multiple process. "-j" mode is optional, and works with all existing test selection mechanism, as well as "-v", "-l" etc. In "-j" mode, main process use UDS/SEQPACKET to communicate to each forked worker, commanding it to run tests and collect logs. After all tests are finished, a summary is printed. main process use multiple competing threads to dispatch work to worker, trying to keep them all busy. The test status will be printed as soon as it is finished, if there are error logs, it will be printed after the final summary line. By specifying "--debug", additional debug information on server/worker communication will be printed. Example output: > ./test_progs -n 15-20 -j [ 12.801730] bpf_testmod: loading out-of-tree module taints kernel. Launching 8 workers. #20 btf_split:OK #16 btf_endian:OK #18 btf_module:OK #17 btf_map_in_map:OK #19 btf_skc_cls_ingress:OK #15 btf_dump:OK Summary: 6/20 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Yucong Sun <sunyucong@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211006185619.364369-2-fallentree@fb.com
2021-10-08bpf/selftests: Add test for writable bare tracepointHou Tao1-2/+2
Add a writable bare tracepoint in bpf_testmod module, and trigger its calling when reading /sys/kernel/bpf_testmod with a specific buffer length. The reading will return the value in writable context if the early return flag is enabled in writable context. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211004094857.30868-4-hotforest@gmail.com
2021-09-13selftests/bpf: Add test for bpf_get_branch_snapshotSong Liu1-0/+39
This test uses bpf_get_branch_snapshot from a fexit program. The test uses a target function (bpf_testmod_loop_test) and compares the record against kallsyms. If there isn't enough record matching kallsyms, the test fails. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20210910183352.3151445-4-songliubraving@fb.com
2021-08-17selftests/bpf: Support glob matching for test selector.Yucong Sun1-16/+62
This patch adds '-a' and '-d' arguments supporting both exact string match as well as using '*' wildcard in test/subtests selection. '-a' and '-t' can co-exists, same as '-d' and '-b', in which case they just add to the list of allowed or denied test selectors. Caveat: Same as the current substring matching mechanism, test and subtest selector applies independently, 'a*/b*' will execute all tests matching "a*", and with subtest name matching "b*", but tests matching "a*" that has no subtests will also be executed. Signed-off-by: Yucong Sun <fallentree@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210817044732.3263066-5-fallentree@fb.com
2021-08-17selftests/bpf: Also print test name in subtest status messageYucong Sun1-2/+2
This patch add test name in subtest status message line, making it possible to grep ':OK' in the output to generate a list of passed test+subtest names, which can be processed to generate argument list to be used with "-a", "-d" exact string matching. Example: #1/1 align/mov:OK .. #1/12 align/pointer variable subtraction:OK #1 align:OK Signed-off-by: Yucong Sun <fallentree@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210817044732.3263066-4-fallentree@fb.com
2021-08-17selftests/bpf: Correctly display subtest skip statusYucong Sun1-12/+13
In skip_account(), test->skip_cnt is set to 0 at the end, this makes next print statement never display SKIP status for the subtest. This patch moves the accounting logic after the print statement, fixing the issue. This patch also added SKIP status display for normal tests. Signed-off-by: Yucong Sun <fallentree@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210817044732.3263066-3-fallentree@fb.com
2021-08-17selftests/bpf: Skip loading bpf_testmod when using -l to list tests.Yucong Sun1-2/+2
When using "-l", test_progs often is executed as non-root user, load_bpf_testmod() will fail and output errors. This patch skips loading bpf testmod when "-l" is specified, making output cleaner. Signed-off-by: Yucong Sun <fallentree@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210817044732.3263066-2-fallentree@fb.com
2021-05-25selftests/bpf: Turn on libbpf 1.0 mode and fix all IS_ERR checksAndrii Nakryiko1-0/+3
Turn ony libbpf 1.0 mode. Fix all the explicit IS_ERR checks that now will be broken because libbpf returns NULL on error (and sets errno). Fix ASSERT_OK_PTR and ASSERT_ERR_PTR to work for both old mode and new modes and use them throughout selftests. This is trivial to do by using libbpf_get_error() API that all libbpf users are supposed to use, instead of IS_ERR checks. A bunch of checks also did explicit -1 comparison for various fd-returning APIs. Such checks are replaced with >= 0 or < 0 cases. There were also few misuses of bpf_object__find_map_by_name() in test_maps. Those are fixed in this patch as well. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20210525035935.1461796-3-andrii@kernel.org
2021-01-26selftests/bpf: Don't exit on failed bpf_testmod unloadAndrii Nakryiko1-1/+1
Fix bug in handling bpf_testmod unloading that will cause test_progs exiting prematurely if bpf_testmod unloading failed. This is especially problematic when running a subset of test_progs that doesn't require root permissions and doesn't rely on bpf_testmod, yet will fail immediately due to exit(1) in unload_bpf_testmod(). Fixes: 9f7fa225894c ("selftests/bpf: Add bpf_testmod kernel module for testing") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210126065019.1268027-1-andrii@kernel.org
2021-01-12selftests/bpf: Sync RCU before unloading bpf_testmodAndrii Nakryiko1-0/+11
If some of the subtests use module BTFs through ksyms, they will cause bpf_prog to take a refcount on bpf_testmod module, which will prevent it from successfully unloading. Module's refcnt is decremented when bpf_prog is freed, which generally happens in RCU callback. So we need to trigger syncronize_rcu() in the kernel, which can be achieved nicely with membarrier(MEMBARRIER_CMD_SHARED) or membarrier(MEMBARRIER_CMD_GLOBAL) syscall. So do that in kernel_sync_rcu() and make it available to other test inside the test_progs. This synchronize_rcu() is called before attempting to unload bpf_testmod. Fixes: 9f7fa225894c ("selftests/bpf: Add bpf_testmod kernel module for testing") Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/bpf/20210112075520.4103414-5-andrii@kernel.org
2020-12-10selftests/bpf: Silence ima_setup.sh when not running in verbose mode.KP Singh1-0/+10
Currently, ima_setup.sh spews outputs from commands like mkfs and dd on the terminal without taking into account the verbosity level of the test framework. Update test_progs to set the environment variable SELFTESTS_VERBOSE=1 when a verbose output is requested. This environment variable is then used by ima_setup.sh (and can be used by other similar scripts) to obey the verbosity level of the test harness without needing to re-implement command line options for verbosity. In "silent" mode, the script saves the output to a temporary file, the contents of which are echoed back to stderr when the script encounters an error. Fixes: 34b82d3ac105 ("bpf: Add a selftest for bpf_ima_inode_hash") Reported-by: Andrii Nakryiko <andrii@kernel.org> Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: KP Singh <kpsingh@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201211010711.3716917-1-kpsingh@kernel.org
2020-12-03selftests/bpf: Add support for marking sub-tests as skippedAndrii Nakryiko1-3/+3
Previously skipped sub-tests would be counted as passing with ":OK" appened in the log. Change that to be accounted as ":SKIP". Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201203204634.1325171-8-andrii@kernel.org
2020-12-03selftests/bpf: Add bpf_testmod kernel module for testingAndrii Nakryiko1-0/+59
Add bpf_testmod module, which is conceptually out-of-tree module and provides ways for selftests/bpf to test various kernel module-related functionality: raw tracepoint, fentry/fexit/fmod_ret, etc. This module will be auto-loaded by test_progs test runner and expected by some of selftests to be present and loaded. Pahole currently isn't able to generate BTF for static functions in kernel modules, so make sure traced function is global. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20201203204634.1325171-7-andrii@kernel.org
2020-08-24selftests/bpf: Fix test_progs-flavor run getting number of testsJesper Dangaard Brouer1-1/+3
Commit 643e7233aa94 ("selftests/bpf: Test_progs option for getting number of tests") introduced ability to getting number of tests, which is targeted towards scripting. As demonstrate in the commit the number can be use as a shell variable for further scripting. The test_progs program support "flavor", which is detected by the binary have a "-flavor" in the executable name. One example is test_progs-no_alu32, which load bpf-progs compiled with disabled alu32, located in dir 'no_alu32/'. The problem is that invoking a "flavor" binary prints to stdout e.g.: "Switching to flavor 'no_alu32' subdirectory..." Thus, intermixing with the number of tests, making it unusable for scripting. Fix the issue by only printing "flavor" info when verbose -v option is used. Fixes: 643e7233aa94 ("selftests/bpf: Test_progs option for getting number of tests") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159827024012.923543.7104106594870150597.stgit@firesoul
2020-07-09selftests/bpf: test_progs avoid minus shell exit codesJesper Dangaard Brouer1-4/+5
There are a number of places in test_progs that use minus-1 as the argument to exit(). This is confusing as a process exit status is masked to be a number between 0 and 255 as defined in man exit(3). Thus, users will see status 255 instead of minus-1. This patch use positive exit code 3 instead of minus-1. These cases are put in the same group of infrastructure setup errors. Fixes: fd27b1835e70 ("selftests/bpf: Reset process and thread affinity after each test/sub-test") Fixes: 811d7e375d08 ("bpf: selftests: Restore netns after each test") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159410594499.1093222.11080787853132708654.stgit@firesoul
2020-07-09selftests/bpf: test_progs use another shell exit on non-actionsJesper Dangaard Brouer1-1/+3
This is a follow up adjustment to commit 6c92bd5cd465 ("selftests/bpf: Test_progs indicate to shell on non-actions"), that returns shell exit indication EXIT_FAILURE (value 1) when user selects a non-existing test. The problem with using EXIT_FAILURE is that a shell script cannot tell the difference between a non-existing test and the test failing. This patch uses value 2 as shell exit indication. (Aside note unrecognized option parameters use value 64). Fixes: 6c92bd5cd465 ("selftests/bpf: Test_progs indicate to shell on non-actions") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159410593992.1093222.90072558386094370.stgit@firesoul
2020-07-02bpf: selftests: Restore netns after each testMartin KaFai Lau1-2/+21
It is common for networking tests creating its netns and making its own setting under this new netns (e.g. changing tcp sysctl). If the test forgot to restore to the original netns, it would affect the result of other tests. This patch saves the original netns at the beginning and then restores it after every test. Since the restore "setns()" is not expensive, it does it on all tests without tracking if a test has created a new netns or not. The new restore_netns() could also be done in test__end_subtest() such that each subtest will get an automatic netns reset. However, the individual test would lose flexibility to have total control on netns for its own subtests. In some cases, forcing a test to do unnecessary netns re-configure for each subtest is time consuming. e.g. In my vm, forcing netns re-configure on each subtest in sk_assign.c increased the runtime from 1s to 8s. On top of that, test_progs.c is also doing per-test (instead of per-subtest) cleanup for cgroup. Thus, this patch also does per-test restore_netns(). The only existing per-subtest cleanup is reset_affinity() and no test is depending on this. Thus, it is removed from test__end_subtest() to give a consistent expectation to the individual tests. test_progs.c only ensures any affinity/netns/cgroup change made by an earlier test does not affect the following tests. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200702004858.2103728-1-kafai@fb.com
2020-07-01selftests/bpf: Test_progs option for listing test namesJesper Dangaard Brouer1-0/+15
The program test_progs have some very useful ability to specify a list of test name substrings for selecting which tests to run. This patch add the ability to list the selected test names without running them. This is practical for seeing which tests gets selected with given select arguments (which can also contain a exclude list via --name-blacklist). This output can also be used by shell-scripts in a for-loop: for N in $(./test_progs --list -t xdp); do \ ./test_progs -t $N 2>&1 > result_test_${N}.log & \ done ; wait This features can also be used for looking up a test number and returning a testname. If the selection was empty then a shell EXIT_FAILURE is returned. This is useful for scripting. e.g. like this: n=1; while [ $(./test_progs --list -n $n) ] ; do \ ./test_progs -n $n ; n=$(( n+1 )); \ done Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159363985751.930467.9610992940793316982.stgit@firesoul
2020-07-01selftests/bpf: Test_progs option for getting number of testsJesper Dangaard Brouer1-0/+18
It can be practial to get the number of tests that test_progs contain. This could for example be used to create a shell for-loop construct that runs the individual tests. Like: for N in $(seq 1 $(./test_progs -c)); do ./test_progs -n $N 2>&1 > result_test_${N}.log & done ; wait V2: Add the ability to return the count for the selected tests. This is useful for getting a count e.g. after excluding some tests with option -b. The current beakers test script like to report the max test count upfront. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159363985244.930467.12617117873058936829.stgit@firesoul
2020-07-01selftests/bpf: Test_progs indicate to shell on non-actionsJesper Dangaard Brouer1-0/+3
When a user selects a non-existing test the summary is printed with indication 0 for all info types, and shell "success" (EXIT_SUCCESS) is indicated. This can be understood by a human end-user, but for shell scripting is it useful to indicate a shell failure (EXIT_FAILURE). Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159363984736.930467.17956007131403952343.stgit@firesoul
2020-05-13selftests/bpf: Extract parse_num_list into generic testing_helpers.cAndrii Nakryiko1-63/+4
Add testing_helpers.c, which will contain generic helpers for test runners and tests needing some common generic functionality, like parsing a set of numbers. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200512192445.2351848-2-andriin@fb.com
2020-05-09selftests/bpf: Move existing common networking parts into network_helpersStanislav Fomichev1-30/+0
1. Move pkt_v4 and pkt_v6 into network_helpers and adjust the users. 2. Copy-paste spin_lock_thread into two tests that use it. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Andrey Ignatov <rdna@fb.com> Link: https://lore.kernel.org/bpf/20200508174611.228805-3-sdf@google.com
2020-04-28selftests/bpf: Fix memory leak in extract_build_id()Andrii Nakryiko1-0/+1
getline() allocates string, which has to be freed. Fixes: 81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200429012111.277390-7-andriin@fb.com
2020-04-28selftests/bpf: Fix memory leak in test selectorAndrii Nakryiko1-4/+16
Free test selector substrings, which were strdup()'ed. Fixes: b65053cd94f4 ("selftests/bpf: Add whitelist/blacklist of test names to test_progs") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200429012111.277390-6-andriin@fb.com
2020-03-17selftests/bpf: Reset process and thread affinity after each test/sub-testAndrii Nakryiko1-1/+41
Some tests and sub-tests are setting "custom" thread/process affinity and don't reset it back. Instead of requiring each test to undo all this, ensure that thread affinity is restored by test_progs test runner itself. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200314013932.4035712-3-andriin@fb.com
2020-03-17selftests/bpf: Fix test_progs's parsing of test numbersAndrii Nakryiko1-6/+7
When specifying disjoint set of tests, test_progs doesn't set skipped test's array elements to false. This leads to spurious execution of tests that should have been skipped. Fix it by explicitly initializing them to false. Fixes: 3a516a0a3a7b ("selftests/bpf: add sub-tests support for test_progs") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200314013932.4035712-2-andriin@fb.com
2020-03-17selftests/bpf: Fix nanosleep for real this timeAndrii Nakryiko1-10/+6
Amazingly, some libc implementations don't call __NR_nanosleep syscall from their nanosleep() APIs. Hammer it down with explicit syscall() call and never get back to it again. Also simplify code for timespec initialization. I verified that nanosleep is called w/ printk and in exactly same Linux image that is used in Travis CI. So it should both sleep and call correct syscall. v1->v2: - math is too hard, fix usec -> nsec convertion (Martin); - test_vmlinux has explicit nanosleep() call, convert that one as well. Fixes: 4e1fd25d19e8 ("selftests/bpf: Fix usleep() implementation") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200314002743.3782677-1-andriin@fb.com
2020-03-13selftests/bpf: Ensure consistent test failure outputAndrii Nakryiko1-5/+5
printf() doesn't seem to honor using overwritten stdout/stderr (as part of stdio hijacking), so ensure all "standard" invocations of printf() do fprintf(stdout, ...) instead. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200313172336.1879637-2-andriin@fb.com
2020-03-13selftests/bpf: Fix usleep() implementationAndrii Nakryiko1-1/+10
nanosleep syscall expects pointer to struct timespec, not nanoseconds directly. Current implementation fulfills its purpose of invoking nanosleep syscall, but doesn't really provide sleeping capabilities, which can cause flakiness for tests relying on usleep() to wait for something. Fixes: ec12a57b822c ("selftests/bpf: Guarantee that useep() calls nanosleep() syscall") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200313061837.3685572-1-andriin@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-03-13selftests/bpf: Guarantee that useep() calls nanosleep() syscallAndrii Nakryiko1-0/+9
Some implementations of C runtime library won't call nanosleep() syscall from usleep(). But a bunch of kprobe/tracepoint selftests rely on nanosleep being called to trigger them. To make this more reliable, "override" usleep implementation and call nanosleep explicitly. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Julia Kartseva <hex@fb.com> Link: https://lore.kernel.org/bpf/20200311185345.3874602-1-andriin@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-02-25selftests/bpf: Print backtrace on SIGSEGV in test_progsAndrii Nakryiko1-0/+25
Due to various bugs in tests clean up code (usually), if host system is misconfigured, it happens that test_progs will just crash in the middle of running a test with little to no indication of where and why the crash happened. For cases where coredump is not readily available (e.g., inside a CI), it's very helpful to have a stack trace, which lead to crash, to be printed out. This change adds a signal handler that will capture and print out symbolized backtrace: $ sudo ./test_progs -t mmap test_mmap:PASS:skel_open_and_load 0 nsec test_mmap:PASS:bss_mmap 0 nsec test_mmap:PASS:data_mmap 0 nsec Caught signal #11! Stack trace: ./test_progs(crash_handler+0x18)[0x42a888] /lib64/libpthread.so.0(+0xf5d0)[0x7f2aab5175d0] ./test_progs(test_mmap+0x3c0)[0x41f0a0] ./test_progs(main+0x160)[0x407d10] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f2aab15d3d5] ./test_progs[0x407ebc] [1] 1988412 segmentation fault (core dumped) sudo ./test_progs -t mmap Unfortunately, glibc's symbolization support is unable to symbolize static functions, only global ones will be present in stack trace. But it's still a step forward without adding extra libraries to get a better symbolization. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200225000847.3965188-1-andriin@fb.com
2020-01-15selftests/bpf: Add whitelist/blacklist of test names to test_progsAndrii Nakryiko1-10/+73
Add ability to specify a list of test name substrings for selecting which tests to run. So now -t is accepting a comma-separated list of strings, similarly to how -n accepts a comma-separated list of test numbers. Additionally, add ability to blacklist tests by name. Blacklist takes precedence over whitelist. Blacklisting is important for cases where it's known that some tests can't pass (e.g., due to perf hardware events that are not available within VM). This is going to be used for libbpf testing in Travis CI in its Github repo. Example runs with just whitelist and whitelist + blacklist: $ sudo ./test_progs -tattach,core/existence #1 attach_probe:OK #6 cgroup_attach_autodetach:OK #7 cgroup_attach_multi:OK #8 cgroup_attach_override:OK #9 core_extern:OK #10/44 existence:OK #10/45 existence___minimal:OK #10/46 existence__err_int_sz:OK #10/47 existence__err_int_type:OK #10/48 existence__err_int_kind:OK #10/49 existence__err_arr_kind:OK #10/50 existence__err_arr_value_type:OK #10/51 existence__err_struct_type:OK #10 core_reloc:OK #19 flow_dissector_reattach:OK #60 tp_attach_query:OK Summary: 8/8 PASSED, 0 SKIPPED, 0 FAILED $ sudo ./test_progs -tattach,core/existence -bcgroup,flow/arr #1 attach_probe:OK #9 core_extern:OK #10/44 existence:OK #10/45 existence___minimal:OK #10/46 existence__err_int_sz:OK #10/47 existence__err_int_type:OK #10/48 existence__err_int_kind:OK #10/51 existence__err_struct_type:OK #10 core_reloc:OK #60 tp_attach_query:OK Summary: 4/6 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Julia Kartseva <hex@fb.com> Link: https://lore.kernel.org/bpf/20200116005549.3644118-1-andriin@fb.com
2019-11-24selftests/bpf: Integrate verbose verifier log into test_progsAndrii Nakryiko1-6/+12
Add exra level of verboseness, activated by -vvv argument. When -vv is specified, verbose libbpf and verifier log (level 1) is output, even for successful tests. With -vvv, verifier log goes to level 2. This is extremely useful to debug verifier failures, as well as just see the state and flow of verification. Before this, you'd have to go and modify load_program()'s source code inside libbpf to specify extra log_level flags, which is suboptimal to say the least. Currently -vv and -vvv triggering verifier output is integrated into test_stub's bpf_prog_load as well as bpf_verif_scale.c tests. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191120003548.4159797-1-andriin@fb.com
2019-10-21selftests/bpf: Make a copy of subtest nameAndrii Nakryiko1-5/+12
test_progs never created a copy of subtest name, rather just stored pointer to whatever string test provided. This is bad as that string might be freed or modified by the end of subtest. Fix this by creating a copy of given subtest name when subtest starts. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191021033902.3856966-6-andriin@fb.com
2019-10-17selftests/bpf: Teach test_progs to cd into subdirAndrii Nakryiko1-1/+32
We are building a bunch of "flavors" of test_progs, e.g., w/ alu32 flag for Clang when building BPF object. test_progs setup is relying on having all the BPF object files and extra resources to be available in current working directory, though. But we actually build all these files into a separate sub-directory. Next set of patches establishes convention of naming "flavored" test_progs (and test runner binaries in general) as test_progs-flavor (e.g., test_progs-alu32), for each such extra flavor. This patch teaches test_progs binary to automatically detect its own extra flavor based on its argv[0], and if present, to change current directory to a flavor-specific subdirectory. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191016060051.2024182-2-andriin@fb.com
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.