| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The /proc/self/auxv contains information about "platform" on any system.
Also "base platform" which is an indication about platform string
corresponding to the real PVR. When systems are booted in compat mode,
say, power10 booted in power9 mode, "platform" will point to power9
whereas base platform will point to power10. Incase, if the distro
doesn't support platform indicated by real PVR, base platform will have
a default value.
The mismatch of platform/base platform is an indication of system booted
in compat mode. In such cases, distro will have a Generic Compat
registered which supports basic features for performance monitoring.
Some of the selftest needs to be handled differently ( ex: generic
events, alternative events, bhrb filter map) in Generic Compat PMU.
Hence selftest framework needs utility functions to identify such cases.
One way is make sure of auxv information. Below condition can be used to
detect if Generic Compat PMU is registered. ie:
if ((AT_PLATFORM != AT_BASE_PLATFORM) && (AT_BASE_PLATFORM != PVR))
this indicates Generic Compat PMU.
Add utility function in "include/utils.h" to return:
AT_PLATFORM and AT_BASE_PLATFORM from auxv. Also update misc.c in
"sampling_tests" folder to add function to use above check to determine
presence of generic compat pmu.
In other architecture ( like x86 ), pmu_name is exposed via
"/sys/bus/event_source/devices/cpu/caps". The same could be used in
powerpc in future. Since currently we don't have the "caps" support in
powerpc, patch uses auxv information to detect platform type and compat
mode. But as placeholder utility function is added considering
possiblity of getting "caps" information via sysfs. If that doesn't
exist, fallback to using auxv information.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-3-atrajeev@linux.vnet.ibm.com
|
|
Adds a simple test of some basic matrix multiply assist (MMA)
instructions.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200622021832.15870-1-alistair@popple.id.au
|
|
For simplicity in backporting, the original entry_flush test contained
a lot of duplicated code from the rfi_flush test. De-duplicate that code.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
utils.h provides have_hwcap() and have_hwcap2() which check for a
feature bit. Those bits are defined in asm/cputable.h, so include it
in utils.h so users of utils.h don't have to do it manually.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015727.1977134-4-mpe@ellerman.id.au
|
|
This version of set_dscr() was added for the RFI flush test, and is
fairly specific to it. It also clashes with the version of set_dscr()
in dscr/dscr.h. So move it into the RFI flush test where it's used.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015727.1977134-3-mpe@ellerman.id.au
|
|
The gettid() syscall wrapper was first introduced in
glibc 2.30. This adds a wrapper for use in distros
running older versions.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8ca3b0eeda989707815d1cf337cc33f090408965.1595821792.git.sandipan@linux.ibm.com
|
|
This adds a helper similar to FAIL_IF() which lets a
program exit with code 1 (to indicate failure) when
the given condition is true.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dac282d5c2e96e7816dc522e4e20d56d7c79c898.1595821792.git.sandipan@linux.ibm.com
|
|
This moves all the pkey-related helpers to a new header
file and also a helper to print error messages in signal
handlers to the existing utils header file.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/28e633fa9ec1a6500c12188e09ea1887b10a10c1.1595821792.git.sandipan@linux.ibm.com
|
|
This moves a function to test if the MMU is in Hash mode
under the generic test utilities.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200604125610.649668-3-sandipan@linux.ibm.com
|
|
Extend the alignment handler selftest to exercise prefixed load store
instructions. Add tests for prefixed VSX, floating point and integer
instructions.
Skip prefix tests if ISA version does not support prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Tested-by: Alistair Popple <alistair@popple.id.au>
[mpe: Fixup PPC_FEATURE2_ARCH_3_1 naming as noted by Alistair]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520021103.19798-2-jniethe5@gmail.com
|
|
This test uses the PMU to count branch prediction hits/misses for a
known loop, and compare the result to the reported spectre v2
mitigation.
This gives us a way of sanity checking that the reported mitigation is
actually in effect.
Sample output for some cases, eg:
Power9:
sysfs reports: 'Vulnerable'
PM_BR_PRED_CCACHE: result 368 running/enabled 5792777124
PM_BR_MPRED_CCACHE: result 319 running/enabled 5792775546
PM_BR_PRED_PCACHE: result 2147483281 running/enabled 5792773128
PM_BR_MPRED_PCACHE: result 213604201 running/enabled 5792771640
Miss percent 9 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
sysfs reports: 'Mitigation: Indirect branch serialisation (kernel only)'
PM_BR_PRED_CCACHE: result 895 running/enabled 5780320920
PM_BR_MPRED_CCACHE: result 822 running/enabled 5780312414
PM_BR_PRED_PCACHE: result 2147482754 running/enabled 5780308836
PM_BR_MPRED_PCACHE: result 213639731 running/enabled 5780307912
Miss percent 9 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
sysfs reports: 'Mitigation: Indirect branch cache disabled'
PM_BR_PRED_CCACHE: result 2147483649 running/enabled 20540186160
PM_BR_MPRED_CCACHE: result 2147483649 running/enabled 20540180056
PM_BR_PRED_PCACHE: result 0 running/enabled 20540176090
PM_BR_MPRED_PCACHE: result 0 running/enabled 20540174182
Miss percent 100 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
Power8:
sysfs reports: 'Vulnerable'
PM_BR_PRED_CCACHE: result 2147483649 running/enabled 3505888142
PM_BR_MPRED_CCACHE: result 9 running/enabled 3505882788
Miss percent 0 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
sysfs reports: 'Mitigation: Indirect branch cache disabled'
PM_BR_PRED_CCACHE: result 2147483649 running/enabled 16931421988
PM_BR_MPRED_CCACHE: result 2147483649 running/enabled 16931416478
Miss percent 100 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
success: spectre_v2
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190520105520.22274-1-mpe@ellerman.id.au
|
|
Based on 1 normalized pattern(s):
licensed under gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 99 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170027.163048684@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A new self test that forces MSR[TS] to be set without calling any TM
instruction. This test also tries to cause a page fault at a signal
handler, exactly between MSR[TS] set and tm_recheckpoint(), forcing
thread->texasr to be rewritten with TEXASR[FS] = 0, which will cause a BUG
when tm_recheckpoint() is called.
This test is not deterministic, since it is hard to guarantee that the page
access will cause a page fault. In order to force more page faults at
signal context, the signal handler and the ucontext are being mapped into a
MADV_DONTNEED memory chunks.
Tests have shown that the bug could be exposed with few interactions in a
buggy kernel. This test is configured to loop 5000x, having a good chance
to hit the kernel issue in just one run. This self test takes less than
two seconds to run.
This test uses set/getcontext because the kernel will recheckpoint
zeroed structures, causing the test to segfault, which is undesired because
the test needs to rerun, so, there is a signal handler for SIGSEGV which
will restart the test.
v2: Uses the MADV_DONTNEED memory advice
v3: Fix memcpy and 32-bits compilation
v4: Does not define unused macros
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This patch creates a new macro that skips a test and prints a message to
stderr. This is useful to give an idea why the tests is being skipped,
other than just skipping the test blindly.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This adds a test to verify proper functioning of the rfi flush
capability implemented to mitigate meltdown. The test works by
measuring the number of L1d cache misses encountered while loading
data from memory. Across a system call, since the L1d cache is flushed
when rfi_flush is enabled, the number of cache misses is expected to
be relative to the number of cachelines corresponding to the data
being loaded.
The current system setting is reflected via powerpc/rfi_flush under
debugfs (assumed to be /sys/kernel/debug/). This test verifies the
expected result with rfi_flush enabled as well as when it is disabled.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Add SPDX tags, clang format, skip if the debugfs is missing, use
__u64 and SANE_USERSPACE_TYPES to avoid printf() build errors.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
... so that it can be used by others.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Some of our selftests have only been tested on ppc64le and crash or
behave weirdly on ppc64/ppc32. So add a helper for checking the UTS
machine.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Refactor the AUXV routines so they are more composable. In a future test
we want to look for many AUXV entries and we don't want to have to read
/proc/self/auxv each time.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
There are some functions, especially register related, which can
be shared across multiple selftests/powerpc test directories.
This patch creates a new include directory to store those shared
files, so that the file layout becomes more neat.
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
[mpe: Reworked to move the headers only]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
Athira Rajeev
Alistair Popple
Daniel Axtens
Michael Ellerman
Sandipan Das
Jordan Niethe
Thomas Gleixner
Breno Leitao
Naveen N. Rao
Simon Guo