aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91/pm_slowclock.S
blob: b6b00a1f612546eb463036214455336381560e37 (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
/*
 * arch/arm/mach-at91/pm_slow_clock.S
 *
 *  Copyright (C) 2006 Savin Zlobec
 *
 * AT91SAM9 support:
 *  Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 */

#include <linux/linkage.h>
#include <mach/hardware.h>
#include <mach/at91_pmc.h>

#if defined(CONFIG_ARCH_AT91RM9200)
#include <mach/at91rm9200_mc.h>
#elif defined(CONFIG_ARCH_AT91CAP9)
#include <mach/at91cap9_ddrsdr.h>
#elif defined(CONFIG_ARCH_AT91SAM9G45)
#include <mach/at91sam9_ddrsdr.h>
#else
#include <mach/at91sam9_sdramc.h>
#endif


#ifdef CONFIG_ARCH_AT91SAM9263
/*
 * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
 * handle those cases both here and in the Suspend-To-RAM support.
 */
#warning Assuming EB1 SDRAM controller is *NOT* used
#endif

/*
 * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
 * clock during suspend by adjusting its prescalar and divisor.
 * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
 *       are errata regarding adjusting the prescalar and divisor.
 */
#undef SLOWDOWN_MASTER_CLOCK

#define MCKRDY_TIMEOUT		1000
#define MOSCRDY_TIMEOUT 	1000
#define PLLALOCK_TIMEOUT	1000
#define PLLBLOCK_TIMEOUT	1000


/*
 * Wait until master clock is ready (after switching master clock source)
 */
	.macro wait_mckrdy
	mov	r4, #MCKRDY_TIMEOUT
1:	sub	r4, r4, #1
	cmp	r4, #0
	beq	2f
	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
	tst	r3, #AT91_PMC_MCKRDY
	beq	1b
2:
	.endm

/*
 * Wait until master oscillator has stabilized.
 */
	.macro wait_moscrdy
	mov	r4, #MOSCRDY_TIMEOUT
1:	sub	r4, r4, #1
	cmp	r4, #0
	beq	2f
	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
	tst	r3, #AT91_PMC_MOSCS
	beq	1b
2:
	.endm

/*
 * Wait until PLLA has locked.
 */
	.macro wait_pllalock
	mov	r4, #PLLALOCK_TIMEOUT
1:	sub	r4, r4, #1
	cmp	r4, #0
	beq	2f
	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
	tst	r3, #AT91_PMC_LOCKA
	beq	1b
2:
	.endm

/*
 * Wait until PLLB has locked.
 */
	.macro wait_pllblock
	mov	r4, #PLLBLOCK_TIMEOUT
1:	sub	r4, r4, #1
	cmp	r4, #0
	beq	2f
	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
	tst	r3, #AT91_PMC_LOCKB
	beq	1b
2:
	.endm

	.text

ENTRY(at91_slow_clock)
	/* Save registers on stack */
	stmfd	sp!, {r0 - r12, lr}

	/*
	 * Register usage:
	 *  R1 = Base address of AT91_PMC
	 *  R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
	 *  R3 = temporary register
	 *  R4 = temporary register
	 *  R5 = Base address of second RAM Controller or 0 if not present
	 */
	ldr	r1, .at91_va_base_pmc
	ldr	r2, .at91_va_base_sdramc
	ldr	r5, .at91_va_base_ramc1

	/* Drain write buffer */
	mcr	p15, 0, r0, c7, c10, 4

#ifdef CONFIG_ARCH_AT91RM9200
	/* Put SDRAM in self-refresh mode */
	mov	r3, #1
	str	r3, [r2, #AT91_SDRAMC_SRR]
#elif defined(CONFIG_ARCH_AT91CAP9) \
	|| defined(CONFIG_ARCH_AT91SAM9G45)

	/* prepare for DDRAM self-refresh mode */
	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
	str	r3, .saved_sam9_lpr
	bic	r3, #AT91_DDRSDRC_LPCB
	orr	r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH

	/* figure out if we use the second ram controller */
	cmp	r5, #0
	ldrne	r4, [r5, #AT91_DDRSDRC_LPR]
	strne	r4, .saved_sam9_lpr1
	bicne	r4, #AT91_DDRSDRC_LPCB
	orrne	r4, #AT91_DDRSDRC_LPCB_SELF_REFRESH

	/* Enable DDRAM self-refresh mode */
	str	r3, [r2, #AT91_DDRSDRC_LPR]
	strne	r4, [r5, #AT91_DDRSDRC_LPR]
#else
	/* Enable SDRAM self-refresh mode */
	ldr	r3, [r2, #AT91_SDRAMC_LPR]
	str	r3, .saved_sam9_lpr

	bic	r3, #AT91_SDRAMC_LPCB
	orr	r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
	str	r3, [r2, #AT91_SDRAMC_LPR]
#endif

	/* Save Master clock setting */
	ldr	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
	str	r3, .saved_mckr

	/*
	 * Set the Master clock source to slow clock
	 */
	bic	r3, r3, #AT91_PMC_CSS
	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]

	wait_mckrdy

#ifdef SLOWDOWN_MASTER_CLOCK
	/*
	 * Set the Master Clock PRES and MDIV fields.
	 *
	 * See AT91RM9200 errata #27 and #28 for details.
	 */
	mov	r3, #0
	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]

	wait_mckrdy
#endif

	/* Save PLLA setting and disable it */
	ldr	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
	str	r3, .saved_pllar

	mov	r3, #AT91_PMC_PLLCOUNT
	orr	r3, r3, #(1 << 29)		/* bit 29 always set */
	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]

	/* Save PLLB setting and disable it */
	ldr	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
	str	r3, .saved_pllbr

	mov	r3, #AT91_PMC_PLLCOUNT
	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]

	/* Turn off the main oscillator */
	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
	bic	r3, r3, #AT91_PMC_MOSCEN
	str	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]

	/* Wait for interrupt */
	mcr	p15, 0, r0, c7, c0, 4

	/* Turn on the main oscillator */
	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
	orr	r3, r3, #AT91_PMC_MOSCEN
	str	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]

	wait_moscrdy

	/* Restore PLLB setting */
	ldr	r3, .saved_pllbr
	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]

	tst	r3, #(AT91_PMC_MUL &  0xff0000)
	bne	1f
	tst	r3, #(AT91_PMC_MUL & ~0xff0000)
	beq	2f
1:
	wait_pllblock
2:

	/* Restore PLLA setting */
	ldr	r3, .saved_pllar
	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]

	tst	r3, #(AT91_PMC_MUL &  0xff0000)
	bne	3f
	tst	r3, #(AT91_PMC_MUL & ~0xff0000)
	beq	4f
3:
	wait_pllalock
4:

#ifdef SLOWDOWN_MASTER_CLOCK
	/*
	 * First set PRES if it was not 0,
	 * than set CSS and MDIV fields.
	 *
	 * See AT91RM9200 errata #27 and #28 for details.
	 */
	ldr	r3, .saved_mckr
	tst	r3, #AT91_PMC_PRES
	beq	2f
	and	r3, r3, #AT91_PMC_PRES
	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]

	wait_mckrdy
#endif

	/*
	 * Restore master clock setting
	 */
2:	ldr	r3, .saved_mckr
	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]

	wait_mckrdy

#ifdef CONFIG_ARCH_AT91RM9200
	/* Do nothing - self-refresh is automatically disabled. */
#elif defined(CONFIG_ARCH_AT91CAP9) \
	|| defined(CONFIG_ARCH_AT91SAM9G45)
	/* Restore LPR on AT91 with DDRAM */
	ldr	r3, .saved_sam9_lpr
	str	r3, [r2, #AT91_DDRSDRC_LPR]

	/* if we use the second ram controller */
	cmp	r5, #0
	ldrne	r4, .saved_sam9_lpr1
	strne	r4, [r5, #AT91_DDRSDRC_LPR]

#else
	/* Restore LPR on AT91 with SDRAM */
	ldr	r3, .saved_sam9_lpr
	str	r3, [r2, #AT91_SDRAMC_LPR]
#endif

	/* Restore registers, and return */
	ldmfd	sp!, {r0 - r12, pc}


.saved_mckr:
	.word 0

.saved_pllar:
	.word 0

.saved_pllbr:
	.word 0

.saved_sam9_lpr:
	.word 0

.saved_sam9_lpr1:
	.word 0

.at91_va_base_pmc:
	.word AT91_VA_BASE_SYS + AT91_PMC

#ifdef CONFIG_ARCH_AT91RM9200
.at91_va_base_sdramc:
	.word AT91_VA_BASE_SYS
#elif defined(CONFIG_ARCH_AT91CAP9) \
	|| defined(CONFIG_ARCH_AT91SAM9G45)
.at91_va_base_sdramc:
	.word AT91_VA_BASE_SYS + AT91_DDRSDRC0
#else
.at91_va_base_sdramc:
	.word AT91_VA_BASE_SYS + AT91_SDRAMC0
#endif

.at91_va_base_ramc1:
#if defined(CONFIG_ARCH_AT91SAM9G45)
	.word AT91_VA_BASE_SYS + AT91_DDRSDRC1
#else
	.word 0
#endif

ENTRY(at91_slow_clock_sz)
	.word .-at91_slow_clock