aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-02-19drm/amd/display: Fix BT2020 YCbCr limited/full range inputIlya Bakoulin1-1/+1
[Why] BT2020 YCbCr input is not handled properly when full range quantization is used and limited range is not supported at all. [How] - Add enums for BT2020 YCbCr limited/full range - Add limited range CSC matrix Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Robert Mader <robert.mader@collabora.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Do not wait for PSR disable on vbl enableLeo Li1-1/+1
[Why] Outside of a modeset/link configuration change, we should not have to wait for the panel to exit PSR. Depending on the panel and it's state, it may take multiple frames for it to exit PSR. Therefore, waiting in all scenarios may cause perceived stuttering, especially in combination with faster vblank shutdown. [How] PSR1 disable is hooked up to the vblank enable event, and vice versa. In case of vblank enable, do not wait for panel to exit PSR, but still wait in all other cases. We also avoid a call to unnecessarily change power_opts on disable - this ends up sending another command to dmcub fw. When testing against IGT, some crc tests like kms_plane_alpha_blend and amd_hotplug were failing due to CRC timeouts. This was found to be caused by the early return before HW has fully exited PSR1. Fix this by first making sure we grab a vblank reference, then waiting for panel to exit PSR1, before programming hw for CRC generation. Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3743 Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: add CEC notifier to amdgpu driverKun Liu1-1/+65
This patch adds the cec_notifier feature to amdgpu driver. The changes will allow amdgpu driver code to notify EDID and HPD changes to an eventual CEC adapter. Signed-off-by: Kun Liu <Kun.Liu2@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Adjust dm to use supported interfaces for setting multiple crc windowsWayne Lin1-15/+16
[Why & How] We actually have the capability to calculate independent CRC for 2 crc window at the same time. Extend dm with the capability by having array to configure/maintain multiple crc windows. Add the flexibility but use 1st CRC instance only for now. Can change to use the 2nd CRC instance if needed. Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-18drm/amd/display: Fix NULL pointer dereference in dmub_tracebuffer_showSrinivasan Shanmugam1-1/+4
It corrects the issue by checking if 'adev->dm.dmub_srv' is NULL before accessing its 'meta_info' member. This ensures that we do not dereference a NULL pointer. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:917 dmub_tracebuffer_show() warn: address of 'adev->dm.dmub_srv->meta_info' is non-NULL drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c 901 static int dmub_tracebuffer_show(struct seq_file *m, void *data) 902 { 903 struct amdgpu_device *adev = m->private; 904 struct dmub_srv_fb_info *fb_info = adev->dm.dmub_fb_info; 905 struct dmub_fw_meta_info *fw_meta_info = &adev->dm.dmub_srv->meta_info; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Even if adev->dm.dmub_srv is NULL, the address of ->meta_info can't be NULL 906 struct dmub_debugfs_trace_entry *entries; 907 uint8_t *tbuf_base; 908 uint32_t tbuf_size, max_entries, num_entries, first_entry, i; 909 910 if (!fb_info) 911 return 0; 912 913 tbuf_base = (uint8_t *)fb_info->fb[DMUB_WINDOW_5_TRACEBUFF].cpu_addr; 914 if (!tbuf_base) 915 return 0; 916 --> 917 tbuf_size = fw_meta_info ? fw_meta_info->trace_buffer_size : ^^^^^^^^^^^^ Always non-NULL 918 DMUB_TRACE_BUFFER_SIZE; 919 max_entries = (tbuf_size - sizeof(struct dmub_debugfs_trace_header)) / 920 sizeof(struct dmub_debugfs_trace_entry); 921 922 num_entries = v2: Initialize struct dmub_fw_meta_info *fw_meta_info to NULL (Dan Carpenter) Fixes: 5a498172c8d0 ("drm/amd/display: Make DMCUB tracebuffer debugfs chronological") Cc: Leo Li <sunpeng.li@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-18drm/amd/display: Fix uninitialized variables in amdgpu_dm_debugfsAlex Hung1-4/+4
[WHAT] Some fields in struct dc_link_settings and link_training_settings are not initialized and using them can cause unexpected results. [HOW] Initialize struct dc_link_settings and link_training_settings to zero. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/display: Make DMCUB tracebuffer debugfs chronologicalLeo Li1-3/+23
[Why] Previously, the debugfs did a simple dump of the tracebuffer region. Because the tracebuffer is a ring, it meant that the entries printed may not be in chronological order if the ring rolled over. This makes parsing the tracelog cumbersome. [How] Since dmcub provides the current entry count, use that to determine the latest tracelog entry and output the log chronologically. Also, the fb region size is not accurate of the actual tracebuffer size; it has been padded to alignment requirements. Use the tracebuffer size reported by the fw meta_info, if available. If not, a fallback to the hardcoded default is needed. To make this value available to other .c files, its define was moved to dmub_srv.h. Also, print a indicator at the start of the log if rollover occurred. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: Removed unused assignments and variablesAlex Hung1-40/+8
[WHAT] A number of values are assigned to variables but the stored values are not used afterwards. [HOW] The assignments are removed. If the variables are not used, they are removed as well. This fixes 9 UNUSED_VALUE issues reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: Add MST debug message when link detection failsAlex Hung1-1/+4
[WHY & HOW] dc_link_detect returns a boolean value which can be used to print debug messages when it fails. This fixes 1 CHECKED_RETURN issue reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-27drm/amd/display: Check and log for function error codesAlex Hung1-1/+4
[WHAT & HOW] dm_dmub_hw_init and drm_dp_mst_topology_mgr_set_mst can return error codes and errors should be reported. This fixes 2 CHECKED_RETURN issues reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-19drm/amd/display: Remove redundant null checksAlex Hung1-1/+1
The null checks for aconnector and aconnector->dc_link and stream redundant as they were already dereferenced previously as reported by Coverity; therefore the null checks are removed. This fixes 4 REVERSE_INULL issues reported by Coverity. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Add config support entry to replay caps debugfsRoman Li1-0/+1
[Why] replay_capability debugfs tells whether sink and driver support replay feature. However replay enablement also depends on whether it is enabled/disabled via amdgpu module params. [How] Add 'Config support' entry to output current replay config. Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Extend PSRSU residency modeJack Chang1-1/+1
1. To support multiple PSRSU residency measurement mode Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-20drm/amd/display: Add ips status info to debugfsRoman Li1-0/+47
[Why] For debugging and testing purposes. [How] If IPS is supported create ips_status debugfs entry. Usage: cat /sys/kernel/debug/dri/0/amdgpu_dm_ips_status Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-08drm/amd/display: Add Replay capability and state in debugfsTom Chung1-0/+74
[Why & How] User can get the panel replay capability and state for debug. sudo cat /sys/kernel/debug/dri/0/eDP-1/replay_capability "Sink support: no" - if panel doesn't support Replay "Sink support: yes" - if panel supports Replay "Driver support: no\n" - if driver doesn't support Replay "Driver support: yes\n" - if driver supports Replay sudo cat /sys/kernel/debug/dri/0/eDP-1/replay_state It will return current panel replay state Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Fix incorrect DSC instance for MSTHersen Wu1-12/+36
[Why] DSC debugfs, such as dp_dsc_clock_en_read, use aconnector->dc_link to find pipe_ctx for display. Displays connected to MST hub share the same dc_link. DSC instance is from pipe_ctx. This causes incorrect DSC instance for display connected to MST hub. [How] Add aconnector->sink check to find pipe_ctx. CC: stable@vger.kernel.org Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amd/display: Fix uninitialized variables in DMAlex Hung1-2/+2
This fixes 11 UNINIT issues reported by Coverity. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: add debugfs disallow edp psrHersen Wu1-0/+53
[Why] fix reading edp rx crc timeout failure. after bootup, kernel setup psr with dpcd 0x170 = 5. this notify rx psr enable and let rx fw start checking crc for fw internal logic. rx fw may not update crc read count within dpcd 0x246. read count is always 0. this will lead tx crc reading timeout. [How] add debugfs to let test app to disbable rx crc checking for rx internal logic. then test app can read rx crc dpcd 0x246 successfully. expected app sequence is as below: 1. disable eDP PHY and notify eDP rx with dpcd 0x600 = 2. 2. echo 0x1 /sys/kernel/debug/dri/0/eDP-X/disallow_edp_enter_psr 3. enable eDP PHY and notify eDP rx with dpcd 0x600 = 1 but without dpcd 0x170 = 5. 4. read crc from rx dpcd 0x270, 0x246, etc. 5. echo 0x0 /sys/kernel/debug/dri/0/eDP-X/disallow_edp_enter_psr. this will let eDP back to normal with psr setup dpcd 0x170 = 5. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Fix a potential buffer overflow in 'dp_dsc_clock_en_read()'Srinivasan Shanmugam1-1/+1
Tell snprintf() to store at most 10 bytes in the output buffer instead of 30. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1508 dp_dsc_clock_en_read() error: snprintf() is printing too much 30 vs 10 Fixes: c06e09b76639 ("drm/amd/display: Add DSC parameters logging to debugfs") Cc: Alex Hung <alex.hung@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Wake DMCUB before executing GPINT commandsNicholas Kazlauskas1-24/+5
[Why] DMCUB can be in idle when we attempt to interface with the HW through the GPINT mailbox resulting in a system hang. [How] Add dc_wake_and_execute_gpint() to wrap the wake, execute, sleep sequence. If the GPINT executes successfully then DMCUB will be put back into sleep after the optional response is returned. It functions similar to the inbox command interface. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amd/display: add a debugfs interface for the DMUB trace maskHamza Mahfooz1-0/+101
For features that are implemented primarily in DMUB (e.g. PSR), it is useful to be able to trace them at a DMUB level from the kernel, especially when debugging issues. So, introduce a debugfs interface that is able to read and set the DMUB trace mask dynamically at runtime and document how to use it. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amd/display: Fix a debugfs null pointer errorAurabindo Pillai1-1/+5
[WHY & HOW] Check whether get_subvp_en() callback exists before calling it. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Hung <alex.hung@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-26drm/amd/display: add interface to query SubVP statusAurabindo Pillai1-0/+4
[Why&How] To enable automated testing through IGT, expose an API that is accessible through debugfs to query current status of SubVP feature. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-11drm/amd/display: Add DCHUBBUB callback to report MALL statusAurabindo Pillai1-3/+10
[Why&How] For enabling automated testing, add a hook to DCHUBBUB interface so that mall status can be queried by userspace through debugfs. This removes dependence on requiring a userspace tool like UMR for querying status for MALL static screen IGT test. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-11drm/amd/display: set default return value for ODM Combine debugfsAurabindo Pillai1-1/+1
[Why&How] Set a default return value of -ENOTSUPP to indicate that the hardware does not support querying ODM Combine mode. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Add debugfs interface for ODM combine infoAurabindo Pillai1-1/+32
[Why] For use with IGT tests in userspace, the number of ODM segments in use is required to be exposed to userspace to verify that ODM Combine is working as expected when special timings are committed. [How] Add a connector specific debugfs entry that prints the number of ODM segments in use. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Fix incorrect commentAurabindo Pillai1-2/+1
Fix incorrect comment about hardware capabilities debugfs interface. Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Expose mall capabilityAurabindo Pillai1-0/+19
[Why&How] Export a debugfs file to report whether MALL cache is supported by the asic or not. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-07drm/amd/display: Use seq_puts() in 'amdgpu_current_colorspace_show()' & 'edp_ilr_show()'Srinivasan Shanmugam1-7/+7
Replace seq_printf with seq_puts when there is no argument list. Fix the checkpatch warning: WARNING: Prefer seq_puts to seq_printf Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-23drm/amd/display: Add MST Preferred Link Setting EntryFangzhi Zuo1-1/+155
When using debugfs to change MST link settings, we need to wait until the next stream update to apply the preferred link setting. So, trigger a hotplug event right after the preferred link setting is applied. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: add debugfs for allow_edp_hotplug_detectionHersen Wu1-0/+32
[Why] within dc_link_detect, edp edid is read only for the first time and saved. edid will not be read after the first time read. to run edp edid read test, need read edp edid for each dc_link_detect. dc->config flag allow_edp_hotplug_detection could be used for edp edid test. [How] add debugfs for dc->config.allow_edp_hotplug_detection Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Add debugfs for testing output colorspaceHarry Wentland1-0/+57
In order to IGT test colorspace we'll want to print the currently enabled colorspace on a stream. We add a new debugfs to do so, using the same scheme as current bpc reporting. This might also come in handy when debugging display issues. v4: - Fix function doc comment - Fix sRGB debug print Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Joshua Ashton <joshua@froggi.es> Cc: Pekka Paalanen <ppaalanen@gmail.com> Cc: Sebastian Wick <sebastian.wick@redhat.com> Cc: Vitaly.Prosyak@amd.com Cc: Joshua Ashton <joshua@froggi.es> Cc: Simon Ser <contact@emersion.fr> Cc: Melissa Wen <mwen@igalia.com> Cc: dri-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd: Drop debugfs access to the DPCDMario Limonciello1-107/+0
There is already access to the DPCD from userspace through `CONFIG_DRM_DP_AUX_CHARDEV`, so it's unnecessary to reinvent the wheel with a set of extra debugfs nodes specific to amdgpu. The character device interface behaves more like you would expect in that you can seek/read/write all from the same file. Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: convert link.h functions to function pointer styleWenjing Liu1-1/+1
[Why & How] All dc subcomponents should call another dc component via function pointers stored in a component structure. This is part of dc coding convention since the beginning. The reason behind this is to improve encapsulation and polymorphism. The function contract is extracted into a single link service structure defined in link.h header file and implemented only in link_factory.c instead of spreading across multiple files in link component file structure. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-13drm/amd/display: add sysfs entry to read PSR residency from firmwareShirish S1-0/+20
[Why] Currently there aren't any methods to determine PSR state residency. [How] create a sysfs entry for reading residency and internally hook it up to existing functionality of reading PSR residency from firmware. [Hamza: dropped the link.h include and made checkpatch happy] Signed-off-by: Shirish S <shirish.s@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-07drm/amd/display: Drop CONFIG_DRM_AMD_DC_HDCPHarry Wentland1-10/+1
[Why & How] There is no reason we still need a config option for this. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-28drm/amd/display: merge dc_link.h into dc.h and dc_types.hWenjing Liu1-1/+1
[why] Remove the need to include dc_link.h separately. dc.h should contain everything needed on DM side. [How] Merge dc_link.h into dc.h and dc_types.h so DM only needs to include dc.h to use all link public functions. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-08drm/amd/display: break down dc_link.cWenjing Liu1-2/+2
[why] dc_link contains over 30k line of code, the decision is to break it down to files residing in link folder based on functionality. This change is the last break down change which will remove dc_link.c file after everything is broken down. [how] Move remaining dc_link.c functions into link_detection, link_dpms, link_validation, link_resource, and link_fpga and remove dc_link. Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-08drm/amd/display: fix read errors pertaining to dp_lttpr_status_show()Hamza Mahfooz1-50/+22
Currently, it is likely that we will read the relevant LTTPR caps after link training has completed (which can cause garbage data to be read), however according to the DP 2.0 spec that should be done before link training has commenced. So, instead of reading the registers on demand, use the values provided to us by DC. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-24drm/amd/display: merge dc_link_dp into dc_linkWenjing Liu1-2/+0
[why] Temporarly merge dc_link_dp functions into dc_link for the purpose of removing dc_link_dp files. This is a transitional change for later commits where we will further refactor dc_link file. Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-24drm/amdgpu/display/mst: adjust the naming of mst_port and port of aconnectorWayne Lin1-8/+8
[why & how] The term (i.e. port & mst_port) that we used to use in amdgpu is a bit confusing. Rename them to mst_output_port & mst_root respectively. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: move dp phy related logic to link_dp_phyWenjing Liu1-1/+2
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-05drm/amd/display: drop unnecessary NULL checks in debugfsAlexey Kodanev1-56/+16
pipe_ctx pointer cannot be NULL when getting the address of an element of the pipe_ctx array. Moreover, the MAX_PIPES is defined as 6, so pipe_ctx is not NULL after the loop either. Detected using the static analysis tool - Svace. Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Implement multiple secure displayAlan Liu1-30/+8
[Why] Current secure display only work with single display, now make it work with multiple displays. [How] Create secure_display_context for each crtc instance to store its own Region of Interest (ROI) information. v2: squash in warning fix (Alex) Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-29drm/amd/display: Create debugfs to tell if connector is DPIA linkStylon Wang1-1/+22
[Why] Tests need to tell if display is connected via USB4 DPIA link. Currently this is only possible via analyzing dmesg logs. [How] Create a per-connector debugfs entry to report if the link is tunneled via USB4 DPIA. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Drop struct crc_region and reuse struct rectAlan Liu1-8/+8
[Why] reuse struct rect rather than adding a new struct. [How] - Userspace keeps inputting x_start, y_start, x_end, y_end - We translate data to x, y, width, height in code flow to store - translate back to x_start, y_start, x_end, y_end before programming HW Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Implement secure display on DCN21Alan Liu1-22/+33
[Why] Porting secure display feature from DCN10 to DCN21. Support single display for now and will extend to multiple displays. [How] - use workqueue to offload works for dmub or dmcu firmware - after receiving ROI update from userspace, set skip_frame_cnt to 1 - refactor amdgpu_dm_crtc_handle_crc_window_irq() - disable PSR before activating secure_display on a crtc - check if secure_display is activated before enabling psr - only work for single display for now. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Add UHBR135 and UHBR20 into debugfsFangzhi Zuo1-0/+2
Add support to manually force link rate to UHBR135 (0x546) and UHBR20 (0x7d0). Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-07drm/amd/display: fix memory leak when using debugfs_lookup()Greg Kroah-Hartman1-0/+1
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up by properly calling dput(). Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: hersen wu <hersenxs.wu@amd.com> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Thelford Williams <tdwilliamsiv@gmail.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Cc: Yongzhi Liu <lyz_cs@pku.edu.cn> Cc: Mikita Lipski <mikita.lipski@amd.com> Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-28drm/amd/display: Clean up some inconsistent indentingJiapeng Chong1-36/+36
No functional modification involved. smatch warnings: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1372 dp_dsc_clock_en_read() warn: inconsistent indenting. drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1478 dp_dsc_clock_en_write() warn: inconsistent indenting. drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1563 dp_dsc_slice_width_read() warn: inconsistent indenting. drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1667 dp_dsc_slice_width_write() warn: inconsistent indenting. drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1752 dp_dsc_slice_height_read() warn: inconsistent indenting. drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1856 dp_dsc_slice_height_write() warn: inconsistent indenting. drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1937 dp_dsc_bits_per_pixel_read() warn: inconsistent indenting. drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:2038 dp_dsc_bits_per_pixel_write() warn: inconsistent indenting. drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:2117 dp_dsc_pic_width_read() warn: inconsistent indenting. drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:2178 dp_dsc_pic_height_read() warn: inconsistent indenting. drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:2254 dp_dsc_chunk_size_read() warn: inconsistent indenting. drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:2330 dp_dsc_slice_bpg_offset_read() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.