Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Add WireGuard

 2) Add HE and TWT support to ath11k driver, from John Crispin.

 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.

 4) Add variable window congestion control to TIPC, from Jon Maloy.

 5) Add BCM84881 PHY driver, from Russell King.

 6) Start adding netlink support for ethtool operations, from Michal
    Kubecek.

 7) Add XDP drop and TX action support to ena driver, from Sameeh
    Jubran.

 8) Add new ipv4 route notifications so that mlxsw driver does not have
    to handle identical routes itself. From Ido Schimmel.

 9) Add BPF dynamic program extensions, from Alexei Starovoitov.

10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.

11) Add support for macsec HW offloading, from Antoine Tenart.

12) Add initial support for MPTCP protocol, from Christoph Paasch,
    Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.

13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
    Cherian, and others.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
  net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
  udp: segment looped gso packets correctly
  netem: change mailing list
  qed: FW 8.42.2.0 debug features
  qed: rt init valid initialization changed
  qed: Debug feature: ilt and mdump
  qed: FW 8.42.2.0 Add fw overlay feature
  qed: FW 8.42.2.0 HSI changes
  qed: FW 8.42.2.0 iscsi/fcoe changes
  qed: Add abstraction for different hsi values per chip
  qed: FW 8.42.2.0 Additional ll2 type
  qed: Use dmae to write to widebus registers in fw_funcs
  qed: FW 8.42.2.0 Parser offsets modified
  qed: FW 8.42.2.0 Queue Manager changes
  qed: FW 8.42.2.0 Expose new registers and change windows
  qed: FW 8.42.2.0 Internal ram offsets modifications
  MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
  Documentation: net: octeontx2: Add RVU HW and drivers overview
  octeontx2-pf: ethtool RSS config support
  octeontx2-pf: Add basic ethtool support
  ...

1 files changed, 0 insertions, 71 deletions

diff --git a/Documentation/networking/devlink-params.txt b/Documentation/networking/devlink-params.txt
deleted file mode 100644
index 04e234e9acc9..000000000000
--- a/Documentation/networking/devlink-params.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-Devlink configuration parameters
-================================
-Following is the list of configuration parameters via devlink interface.
-Each parameter can be generic or driver specific and are device level
-parameters.
-
-Note that the driver-specific files should contain the generic params
-they support to, with supported config modes.
-
-Each parameter can be set in different configuration modes:
-	runtime		- set while driver is running, no reset required.
-	driverinit	- applied while driver initializes, requires restart
-			driver by devlink reload command.
-	permanent	- written to device's non-volatile memory, hard reset
-			required.
-
-Following is the list of parameters:
-====================================
-enable_sriov		[DEVICE, GENERIC]
-			Enable Single Root I/O Virtualisation (SRIOV) in
-			the device.
-			Type: Boolean
-
-ignore_ari		[DEVICE, GENERIC]
-			Ignore Alternative Routing-ID Interpretation (ARI)
-			capability. If enabled, adapter will ignore ARI
-			capability even when platforms has the support
-			enabled and creates same number of partitions when
-			platform does not support ARI.
-			Type: Boolean
-
-msix_vec_per_pf_max	[DEVICE, GENERIC]
-			Provides the maximum number of MSIX interrupts that
-			a device can create. Value is same across all
-			physical functions (PFs) in the device.
-			Type: u32
-
-msix_vec_per_pf_min	[DEVICE, GENERIC]
-			Provides the minimum number of MSIX interrupts required
-			for the device initialization. Value is same across all
-			physical functions (PFs) in the device.
-			Type: u32
-
-fw_load_policy		[DEVICE, GENERIC]
-			Controls the device's firmware loading policy.
-			Valid values:
-			* DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_DRIVER (0)
-			  Load firmware version preferred by the driver.
-			* DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_FLASH (1)
-			  Load firmware currently stored in flash.
-			* DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_DISK (2)
-			  Load firmware currently available on host's disk.
-			Type: u8
-
-reset_dev_on_drv_probe	[DEVICE, GENERIC]
-			Controls the device's reset policy on driver probe.
-			Valid values:
-			* DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_UNKNOWN (0)
-			  Unknown or invalid value.
-			* DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_ALWAYS (1)
-			  Always reset device on driver probe.
-			* DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_NEVER (2)
-			  Never reset device on driver probe.
-			* DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_DISK (3)
-			  Reset only if device firmware can be found in the
-			  filesystem.
-			Type: u8
-
-enable_roce		[DEVICE, GENERIC]
-			Enable handling of RoCE traffic in the device.
-			Type: Boolean