Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Add WireGuard

 2) Add HE and TWT support to ath11k driver, from John Crispin.

 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.

 4) Add variable window congestion control to TIPC, from Jon Maloy.

 5) Add BCM84881 PHY driver, from Russell King.

 6) Start adding netlink support for ethtool operations, from Michal
    Kubecek.

 7) Add XDP drop and TX action support to ena driver, from Sameeh
    Jubran.

 8) Add new ipv4 route notifications so that mlxsw driver does not have
    to handle identical routes itself. From Ido Schimmel.

 9) Add BPF dynamic program extensions, from Alexei Starovoitov.

10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.

11) Add support for macsec HW offloading, from Antoine Tenart.

12) Add initial support for MPTCP protocol, from Christoph Paasch,
    Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.

13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
    Cherian, and others.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
  net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
  udp: segment looped gso packets correctly
  netem: change mailing list
  qed: FW 8.42.2.0 debug features
  qed: rt init valid initialization changed
  qed: Debug feature: ilt and mdump
  qed: FW 8.42.2.0 Add fw overlay feature
  qed: FW 8.42.2.0 HSI changes
  qed: FW 8.42.2.0 iscsi/fcoe changes
  qed: Add abstraction for different hsi values per chip
  qed: FW 8.42.2.0 Additional ll2 type
  qed: Use dmae to write to widebus registers in fw_funcs
  qed: FW 8.42.2.0 Parser offsets modified
  qed: FW 8.42.2.0 Queue Manager changes
  qed: FW 8.42.2.0 Expose new registers and change windows
  qed: FW 8.42.2.0 Internal ram offsets modifications
  MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
  Documentation: net: octeontx2: Add RVU HW and drivers overview
  octeontx2-pf: ethtool RSS config support
  octeontx2-pf: Add basic ethtool support
  ...

1 files changed, 243 insertions, 102 deletions

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index ee7a718662c6..70b9a143db84 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -48,7 +48,8 @@ struct phylink {
 	unsigned long phylink_disable_state; /* bitmask of disables */
 	struct phy_device *phydev;
 	phy_interface_t link_interface;	/* PHY_INTERFACE_xxx */
-	u8 link_an_mode;		/* MLO_AN_xxx */
+	u8 cfg_link_an_mode;		/* MLO_AN_xxx */
+	u8 cur_link_an_mode;
 	u8 link_port;			/* The current non-phy ethtool port */
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
 
@@ -71,6 +72,9 @@ struct phylink {
 	bool mac_link_dropped;
 
 	struct sfp_bus *sfp_bus;
+	bool sfp_may_have_phy;
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
+	u8 sfp_port;
 };
 
 #define phylink_printk(level, pl, fmt, ...) \
@@ -182,8 +186,8 @@ static int phylink_parse_fixedlink(struct phylink *pl,
 			pl->link_config.pause |= MLO_PAUSE_ASYM;
 
 		if (ret == 0) {
-			desc = fwnode_get_named_gpiod(fixed_node, "link-gpios",
-						      0, GPIOD_IN, "?");
+			desc = fwnode_gpiod_get_index(fixed_node, "link", 0,
+						      GPIOD_IN, "?");
 
 			if (!IS_ERR(desc))
 				pl->link_gpio = desc;
@@ -256,12 +260,12 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
 
 	dn = fwnode_get_named_child_node(fwnode, "fixed-link");
 	if (dn || fwnode_property_present(fwnode, "fixed-link"))
-		pl->link_an_mode = MLO_AN_FIXED;
+		pl->cfg_link_an_mode = MLO_AN_FIXED;
 	fwnode_handle_put(dn);
 
 	if (fwnode_property_read_string(fwnode, "managed", &managed) == 0 &&
 	    strcmp(managed, "in-band-status") == 0) {
-		if (pl->link_an_mode == MLO_AN_FIXED) {
+		if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
 			phylink_err(pl,
 				    "can't use both fixed-link and in-band-status\n");
 			return -EINVAL;
@@ -273,10 +277,11 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
 		phylink_set(pl->supported, Asym_Pause);
 		phylink_set(pl->supported, Pause);
 		pl->link_config.an_enabled = true;
-		pl->link_an_mode = MLO_AN_INBAND;
+		pl->cfg_link_an_mode = MLO_AN_INBAND;
 
 		switch (pl->link_config.interface) {
 		case PHY_INTERFACE_MODE_SGMII:
+		case PHY_INTERFACE_MODE_QSGMII:
 			phylink_set(pl->supported, 10baseT_Half);
 			phylink_set(pl->supported, 10baseT_Full);
 			phylink_set(pl->supported, 100baseT_Half);
@@ -293,7 +298,9 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
 			phylink_set(pl->supported, 2500baseX_Full);
 			break;
 
+		case PHY_INTERFACE_MODE_USXGMII:
 		case PHY_INTERFACE_MODE_10GKR:
+		case PHY_INTERFACE_MODE_10GBASER:
 			phylink_set(pl->supported, 10baseT_Half);
 			phylink_set(pl->supported, 10baseT_Full);
 			phylink_set(pl->supported, 100baseT_Half);
@@ -301,6 +308,10 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
 			phylink_set(pl->supported, 1000baseT_Half);
 			phylink_set(pl->supported, 1000baseT_Full);
 			phylink_set(pl->supported, 1000baseX_Full);
+			phylink_set(pl->supported, 2500baseT_Full);
+			phylink_set(pl->supported, 2500baseX_Full);
+			phylink_set(pl->supported, 5000baseT_Full);
+			phylink_set(pl->supported, 10000baseT_Full);
 			phylink_set(pl->supported, 10000baseKR_Full);
 			phylink_set(pl->supported, 10000baseCR_Full);
 			phylink_set(pl->supported, 10000baseSR_Full);
@@ -333,14 +344,14 @@ static void phylink_mac_config(struct phylink *pl,
 {
 	phylink_dbg(pl,
 		    "%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
-		    __func__, phylink_an_mode_str(pl->link_an_mode),
+		    __func__, phylink_an_mode_str(pl->cur_link_an_mode),
 		    phy_modes(state->interface),
 		    phy_speed_to_str(state->speed),
 		    phy_duplex_to_str(state->duplex),
 		    __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
 		    state->pause, state->link, state->an_enabled);
 
-	pl->ops->mac_config(pl->config, pl->link_an_mode, state);
+	pl->ops->mac_config(pl->config, pl->cur_link_an_mode, state);
 }
 
 static void phylink_mac_config_up(struct phylink *pl,
@@ -441,7 +452,7 @@ static void phylink_mac_link_up(struct phylink *pl,
 	struct net_device *ndev = pl->netdev;
 
 	pl->cur_interface = link_state.interface;
-	pl->ops->mac_link_up(pl->config, pl->link_an_mode,
+	pl->ops->mac_link_up(pl->config, pl->cur_link_an_mode,
 			     pl->cur_interface, pl->phydev);
 
 	if (ndev)
@@ -460,7 +471,7 @@ static void phylink_mac_link_down(struct phylink *pl)
 
 	if (ndev)
 		netif_carrier_off(ndev);
-	pl->ops->mac_link_down(pl->config, pl->link_an_mode,
+	pl->ops->mac_link_down(pl->config, pl->cur_link_an_mode,
 			       pl->cur_interface);
 	phylink_info(pl, "Link is Down\n");
 }
@@ -479,7 +490,7 @@ static void phylink_resolve(struct work_struct *w)
 	} else if (pl->mac_link_dropped) {
 		link_state.link = false;
 	} else {
-		switch (pl->link_an_mode) {
+		switch (pl->cur_link_an_mode) {
 		case MLO_AN_PHY:
 			link_state = pl->phy_state;
 			phylink_resolve_flow(pl, &link_state);
@@ -650,7 +661,7 @@ struct phylink *phylink_create(struct phylink_config *config,
 		return ERR_PTR(ret);
 	}
 
-	if (pl->link_an_mode == MLO_AN_FIXED) {
+	if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
 		ret = phylink_parse_fixedlink(pl, fwnode);
 		if (ret < 0) {
 			kfree(pl);
@@ -658,6 +669,8 @@ struct phylink *phylink_create(struct phylink_config *config,
 		}
 	}
 
+	pl->cur_link_an_mode = pl->cfg_link_an_mode;
+
 	ret = phylink_register_sfp(pl, fwnode);
 	if (ret < 0) {
 		kfree(pl);
@@ -713,10 +726,12 @@ static void phylink_phy_change(struct phy_device *phydev, bool up,
 		    phy_duplex_to_str(phydev->duplex));
 }
 
-static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
+static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
+			       phy_interface_t interface)
 {
 	struct phylink_link_state config;
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
+	char *irq_str;
 	int ret;
 
 	/*
@@ -731,7 +746,19 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
 	memset(&config, 0, sizeof(config));
 	linkmode_copy(supported, phy->supported);
 	linkmode_copy(config.advertising, phy->advertising);
-	config.interface = pl->link_config.interface;
+
+	/* Clause 45 PHYs switch their Serdes lane between several different
+	 * modes, normally 10GBASE-R, SGMII. Some use 2500BASE-X for 2.5G
+	 * speeds. We really need to know which interface modes the PHY and
+	 * MAC supports to properly work out which linkmodes can be supported.
+	 */
+	if (phy->is_c45 &&
+	    interface != PHY_INTERFACE_MODE_RXAUI &&
+	    interface != PHY_INTERFACE_MODE_XAUI &&
+	    interface != PHY_INTERFACE_MODE_USXGMII)
+		config.interface = PHY_INTERFACE_MODE_NA;
+	else
+		config.interface = interface;
 
 	ret = phylink_validate(pl, supported, &config);
 	if (ret)
@@ -740,13 +767,16 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
 	phy->phylink = pl;
 	phy->phy_link_change = phylink_phy_change;
 
+	irq_str = phy_attached_info_irq(phy);
 	phylink_info(pl,
-		     "PHY [%s] driver [%s]\n", dev_name(&phy->mdio.dev),
-		     phy->drv->name);
+		     "PHY [%s] driver [%s] (irq=%s)\n",
+		     dev_name(&phy->mdio.dev), phy->drv->name, irq_str);
+	kfree(irq_str);
 
 	mutex_lock(&phy->lock);
 	mutex_lock(&pl->state_mutex);
 	pl->phydev = phy;
+	pl->phy_state.interface = interface;
 	linkmode_copy(pl->supported, supported);
 	linkmode_copy(pl->link_config.advertising, config.advertising);
 
@@ -766,28 +796,18 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
 	return 0;
 }
 
-static int __phylink_connect_phy(struct phylink *pl, struct phy_device *phy,
-		phy_interface_t interface)
+static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
+			      phy_interface_t interface)
 {
-	int ret;
-
-	if (WARN_ON(pl->link_an_mode == MLO_AN_FIXED ||
-		    (pl->link_an_mode == MLO_AN_INBAND &&
+	if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED ||
+		    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
 		     phy_interface_mode_is_8023z(interface))))
 		return -EINVAL;
 
 	if (pl->phydev)
 		return -EBUSY;
 
-	ret = phy_attach_direct(pl->netdev, phy, 0, interface);
-	if (ret)
-		return ret;
-
-	ret = phylink_bringup_phy(pl, phy);
-	if (ret)
-		phy_detach(phy);
-
-	return ret;
+	return phy_attach_direct(pl->netdev, phy, 0, interface);
 }
 
 /**
@@ -807,13 +827,23 @@ static int __phylink_connect_phy(struct phylink *pl, struct phy_device *phy,
  */
 int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
 {
+	int ret;
+
 	/* Use PHY device/driver interface */
 	if (pl->link_interface == PHY_INTERFACE_MODE_NA) {
 		pl->link_interface = phy->interface;
 		pl->link_config.interface = pl->link_interface;
 	}
 
-	return __phylink_connect_phy(pl, phy, pl->link_interface);
+	ret = phylink_attach_phy(pl, phy, pl->link_interface);
+	if (ret < 0)
+		return ret;
+
+	ret = phylink_bringup_phy(pl, phy, pl->link_config.interface);
+	if (ret)
+		phy_detach(phy);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(phylink_connect_phy);
 
@@ -837,8 +867,8 @@ int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
 	int ret;
 
 	/* Fixed links and 802.3z are handled without needing a PHY */
-	if (pl->link_an_mode == MLO_AN_FIXED ||
-	    (pl->link_an_mode == MLO_AN_INBAND &&
+	if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
+	    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
 	     phy_interface_mode_is_8023z(pl->link_interface)))
 		return 0;
 
@@ -849,20 +879,23 @@ int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
 		phy_node = of_parse_phandle(dn, "phy-device", 0);
 
 	if (!phy_node) {
-		if (pl->link_an_mode == MLO_AN_PHY)
+		if (pl->cfg_link_an_mode == MLO_AN_PHY)
 			return -ENODEV;
 		return 0;
 	}
 
-	phy_dev = of_phy_attach(pl->netdev, phy_node, flags,
-				pl->link_interface);
+	phy_dev = of_phy_find_device(phy_node);
 	/* We're done with the phy_node handle */
 	of_node_put(phy_node);
-
 	if (!phy_dev)
 		return -ENODEV;
 
-	ret = phylink_bringup_phy(pl, phy_dev);
+	ret = phy_attach_direct(pl->netdev, phy_dev, flags,
+				pl->link_interface);
+	if (ret)
+		return ret;
+
+	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
 	if (ret)
 		phy_detach(phy_dev);
 
@@ -912,7 +945,7 @@ int phylink_fixed_state_cb(struct phylink *pl,
 	/* It does not make sense to let the link be overriden unless we use
 	 * MLO_AN_FIXED
 	 */
-	if (pl->link_an_mode != MLO_AN_FIXED)
+	if (pl->cfg_link_an_mode != MLO_AN_FIXED)
 		return -EINVAL;
 
 	mutex_lock(&pl->state_mutex);
@@ -962,7 +995,7 @@ void phylink_start(struct phylink *pl)
 	ASSERT_RTNL();
 
 	phylink_info(pl, "configuring for %s/%s link mode\n",
-		     phylink_an_mode_str(pl->link_an_mode),
+		     phylink_an_mode_str(pl->cur_link_an_mode),
 		     phy_modes(pl->link_config.interface));
 
 	/* Always set the carrier off */
@@ -985,7 +1018,7 @@ void phylink_start(struct phylink *pl)
 	clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
 	phylink_run_resolve(pl);
 
-	if (pl->link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
+	if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
 		int irq = gpiod_to_irq(pl->link_gpio);
 
 		if (irq > 0) {
@@ -1000,7 +1033,8 @@ void phylink_start(struct phylink *pl)
 		if (irq <= 0)
 			mod_timer(&pl->link_poll, jiffies + HZ);
 	}
-	if (pl->link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
+	if ((pl->cfg_link_an_mode == MLO_AN_FIXED && pl->get_fixed_state) ||
+	    pl->config->pcs_poll)
 		mod_timer(&pl->link_poll, jiffies + HZ);
 	if (pl->phydev)
 		phy_start(pl->phydev);
@@ -1127,7 +1161,7 @@ int phylink_ethtool_ksettings_get(struct phylink *pl,
 
 	linkmode_copy(kset->link_modes.supported, pl->supported);
 
-	switch (pl->link_an_mode) {
+	switch (pl->cur_link_an_mode) {
 	case MLO_AN_FIXED:
 		/* We are using fixed settings. Report these as the
 		 * current link settings - and note that these also
@@ -1199,7 +1233,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
 		/* If we have a fixed link (as specified by firmware), refuse
 		 * to change link parameters.
 		 */
-		if (pl->link_an_mode == MLO_AN_FIXED &&
+		if (pl->cur_link_an_mode == MLO_AN_FIXED &&
 		    (s->speed != pl->link_config.speed ||
 		     s->duplex != pl->link_config.duplex))
 			return -EINVAL;
@@ -1211,7 +1245,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
 		__clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
 	} else {
 		/* If we have a fixed link, refuse to enable autonegotiation */
-		if (pl->link_an_mode == MLO_AN_FIXED)
+		if (pl->cur_link_an_mode == MLO_AN_FIXED)
 			return -EINVAL;
 
 		config.speed = SPEED_UNKNOWN;
@@ -1221,44 +1255,66 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
 		__set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
 	}
 
-	if (phylink_validate(pl, support, &config))
-		return -EINVAL;
-
-	/* If autonegotiation is enabled, we must have an advertisement */
-	if (config.an_enabled && phylink_is_empty_linkmode(config.advertising))
-		return -EINVAL;
-
-	our_kset = *kset;
-	linkmode_copy(our_kset.link_modes.advertising, config.advertising);
-	our_kset.base.speed = config.speed;
-	our_kset.base.duplex = config.duplex;
-
-	/* If we have a PHY, configure the phy */
 	if (pl->phydev) {
+		/* If we have a PHY, we process the kset change via phylib.
+		 * phylib will call our link state function if the PHY
+		 * parameters have changed, which will trigger a resolve
+		 * and update the MAC configuration.
+		 */
+		our_kset = *kset;
+		linkmode_copy(our_kset.link_modes.advertising,
+			      config.advertising);
+		our_kset.base.speed = config.speed;
+		our_kset.base.duplex = config.duplex;
+
 		ret = phy_ethtool_ksettings_set(pl->phydev, &our_kset);
 		if (ret)
 			return ret;
-	}
 
-	mutex_lock(&pl->state_mutex);
-	/* Configure the MAC to match the new settings */
-	linkmode_copy(pl->link_config.advertising, our_kset.link_modes.advertising);
-	pl->link_config.interface = config.interface;
-	pl->link_config.speed = our_kset.base.speed;
-	pl->link_config.duplex = our_kset.base.duplex;
-	pl->link_config.an_enabled = our_kset.base.autoneg != AUTONEG_DISABLE;
+		mutex_lock(&pl->state_mutex);
+		/* Save the new configuration */
+		linkmode_copy(pl->link_config.advertising,
+			      our_kset.link_modes.advertising);
+		pl->link_config.interface = config.interface;
+		pl->link_config.speed = our_kset.base.speed;
+		pl->link_config.duplex = our_kset.base.duplex;
+		pl->link_config.an_enabled = our_kset.base.autoneg !=
+					     AUTONEG_DISABLE;
+		mutex_unlock(&pl->state_mutex);
+	} else {
+		/* For a fixed link, this isn't able to change any parameters,
+		 * which just leaves inband mode.
+		 */
+		if (phylink_validate(pl, support, &config))
+			return -EINVAL;
 
-	/* If we have a PHY, phylib will call our link state function if the
-	 * mode has changed, which will trigger a resolve and update the MAC
-	 * configuration. For a fixed link, this isn't able to change any
-	 * parameters, which just leaves inband mode.
-	 */
-	if (pl->link_an_mode == MLO_AN_INBAND &&
-	    !test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
-		phylink_mac_config(pl, &pl->link_config);
-		phylink_mac_an_restart(pl);
+		/* If autonegotiation is enabled, we must have an advertisement */
+		if (config.an_enabled &&
+		    phylink_is_empty_linkmode(config.advertising))
+			return -EINVAL;
+
+		mutex_lock(&pl->state_mutex);
+		linkmode_copy(pl->link_config.advertising, config.advertising);
+		pl->link_config.interface = config.interface;
+		pl->link_config.speed = config.speed;
+		pl->link_config.duplex = config.duplex;
+		pl->link_config.an_enabled = kset->base.autoneg !=
+					     AUTONEG_DISABLE;
+
+		if (pl->cur_link_an_mode == MLO_AN_INBAND &&
+		    !test_bit(PHYLINK_DISABLE_STOPPED,
+			      &pl->phylink_disable_state)) {
+			/* If in 802.3z mode, this updates the advertisement.
+			 *
+			 * If we are in SGMII mode without a PHY, there is no
+			 * advertisement; the only thing we have is the pause
+			 * modes which can only come from a PHY.
+			 */
+			phylink_mac_config(pl, &pl->link_config);
+			phylink_mac_an_restart(pl);
+		}
+		mutex_unlock(&pl->state_mutex);
 	}
-	mutex_unlock(&pl->state_mutex);
 
 	return 0;
 }
@@ -1343,7 +1399,7 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
 				   pause->tx_pause);
 	} else if (!test_bit(PHYLINK_DISABLE_STOPPED,
 			     &pl->phylink_disable_state)) {
-		switch (pl->link_an_mode) {
+		switch (pl->cur_link_an_mode) {
 		case MLO_AN_FIXED:
 			/* Should we allow fixed links to change against the config? */
 			phylink_resolve_flow(pl, config);
@@ -1550,7 +1606,7 @@ static int phylink_mii_read(struct phylink *pl, unsigned int phy_id,
 	struct phylink_link_state state;
 	int val = 0xffff;
 
-	switch (pl->link_an_mode) {
+	switch (pl->cur_link_an_mode) {
 	case MLO_AN_FIXED:
 		if (phy_id == 0) {
 			phylink_get_fixed_state(pl, &state);
@@ -1575,7 +1631,7 @@ static int phylink_mii_read(struct phylink *pl, unsigned int phy_id,
 static int phylink_mii_write(struct phylink *pl, unsigned int phy_id,
 			     unsigned int reg, unsigned int val)
 {
-	switch (pl->link_an_mode) {
+	switch (pl->cur_link_an_mode) {
 	case MLO_AN_FIXED:
 		break;
 
@@ -1681,25 +1737,21 @@ static void phylink_sfp_detach(void *upstream, struct sfp_bus *bus)
 	pl->netdev->sfp_bus = NULL;
 }
 
-static int phylink_sfp_module_insert(void *upstream,
-				     const struct sfp_eeprom_id *id)
+static int phylink_sfp_config(struct phylink *pl, u8 mode,
+			      const unsigned long *supported,
+			      const unsigned long *advertising)
 {
-	struct phylink *pl = upstream;
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(support1);
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support);
 	struct phylink_link_state config;
 	phy_interface_t iface;
-	int ret = 0;
 	bool changed;
-	u8 port;
-
-	ASSERT_RTNL();
+	int ret;
 
-	sfp_parse_support(pl->sfp_bus, id, support);
-	port = sfp_parse_port(pl->sfp_bus, id, support);
+	linkmode_copy(support, supported);
 
 	memset(&config, 0, sizeof(config));
-	linkmode_copy(config.advertising, support);
+	linkmode_copy(config.advertising, advertising);
 	config.interface = PHY_INTERFACE_MODE_NA;
 	config.speed = SPEED_UNKNOWN;
 	config.duplex = DUPLEX_UNKNOWN;
@@ -1714,9 +1766,7 @@ static int phylink_sfp_module_insert(void *upstream,
 		return ret;
 	}
 
-	linkmode_copy(support1, support);
-
-	iface = sfp_select_interface(pl->sfp_bus, id, config.advertising);
+	iface = sfp_select_interface(pl->sfp_bus, config.advertising);
 	if (iface == PHY_INTERFACE_MODE_NA) {
 		phylink_err(pl,
 			    "selection of interface failed, advertisement %*pb\n",
@@ -1725,18 +1775,18 @@ static int phylink_sfp_module_insert(void *upstream,
 	}
 
 	config.interface = iface;
+	linkmode_copy(support1, support);
 	ret = phylink_validate(pl, support1, &config);
 	if (ret) {
 		phylink_err(pl, "validation of %s/%s with support %*pb failed: %d\n",
-			    phylink_an_mode_str(MLO_AN_INBAND),
+			    phylink_an_mode_str(mode),
 			    phy_modes(config.interface),
 			    __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
 		return ret;
 	}
 
 	phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n",
-		    phylink_an_mode_str(MLO_AN_INBAND),
-		    phy_modes(config.interface),
+		    phylink_an_mode_str(mode), phy_modes(config.interface),
 		    __ETHTOOL_LINK_MODE_MASK_NBITS, support);
 
 	if (phy_interface_mode_is_8023z(iface) && pl->phydev)
@@ -1748,19 +1798,19 @@ static int phylink_sfp_module_insert(void *upstream,
 		linkmode_copy(pl->link_config.advertising, config.advertising);
 	}
 
-	if (pl->link_an_mode != MLO_AN_INBAND ||
+	if (pl->cur_link_an_mode != mode ||
 	    pl->link_config.interface != config.interface) {
 		pl->link_config.interface = config.interface;
-		pl->link_an_mode = MLO_AN_INBAND;
+		pl->cur_link_an_mode = mode;
 
 		changed = true;
 
 		phylink_info(pl, "switched to %s/%s link mode\n",
-			     phylink_an_mode_str(MLO_AN_INBAND),
+			     phylink_an_mode_str(mode),
 			     phy_modes(config.interface));
 	}
 
-	pl->link_port = port;
+	pl->link_port = pl->sfp_port;
 
 	if (changed && !test_bit(PHYLINK_DISABLE_STOPPED,
 				 &pl->phylink_disable_state))
@@ -1769,6 +1819,55 @@ static int phylink_sfp_module_insert(void *upstream,
 	return ret;
 }
 
+static int phylink_sfp_module_insert(void *upstream,
+				     const struct sfp_eeprom_id *id)
+{
+	struct phylink *pl = upstream;
+	unsigned long *support = pl->sfp_support;
+
+	ASSERT_RTNL();
+
+	linkmode_zero(support);
+	sfp_parse_support(pl->sfp_bus, id, support);
+	pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, support);
+
+	/* If this module may have a PHY connecting later, defer until later */
+	pl->sfp_may_have_phy = sfp_may_have_phy(pl->sfp_bus, id);
+	if (pl->sfp_may_have_phy)
+		return 0;
+
+	return phylink_sfp_config(pl, MLO_AN_INBAND, support, support);
+}
+
+static int phylink_sfp_module_start(void *upstream)
+{
+	struct phylink *pl = upstream;
+
+	/* If this SFP module has a PHY, start the PHY now. */
+	if (pl->phydev) {
+		phy_start(pl->phydev);
+		return 0;
+	}
+
+	/* If the module may have a PHY but we didn't detect one we
+	 * need to configure the MAC here.
+	 */
+	if (!pl->sfp_may_have_phy)
+		return 0;
+
+	return phylink_sfp_config(pl, MLO_AN_INBAND,
+				  pl->sfp_support, pl->sfp_support);
+}
+
+static void phylink_sfp_module_stop(void *upstream)
+{
+	struct phylink *pl = upstream;
+
+	/* If this SFP module has a PHY, stop it. */
+	if (pl->phydev)
+		phy_stop(pl->phydev);
+}
+
 static void phylink_sfp_link_down(void *upstream)
 {
 	struct phylink *pl = upstream;
@@ -1788,11 +1887,51 @@ static void phylink_sfp_link_up(void *upstream)
 	phylink_run_resolve(pl);
 }
 
+/* The Broadcom BCM84881 in the Methode DM7052 is unable to provide a SGMII
+ * or 802.3z control word, so inband will not work.
+ */
+static bool phylink_phy_no_inband(struct phy_device *phy)
+{
+	return phy->is_c45 &&
+		(phy->c45_ids.device_ids[1] & 0xfffffff0) == 0xae025150;
+}
+
 static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
 {
 	struct phylink *pl = upstream;
+	phy_interface_t interface;
+	u8 mode;
+	int ret;
 
-	return __phylink_connect_phy(upstream, phy, pl->link_config.interface);
+	/*
+	 * This is the new way of dealing with flow control for PHYs,
+	 * as described by Timur Tabi in commit 529ed1275263 ("net: phy:
+	 * phy drivers should not set SUPPORTED_[Asym_]Pause") except
+	 * using our validate call to the MAC, we rely upon the MAC
+	 * clearing the bits from both supported and advertising fields.
+	 */
+	phy_support_asym_pause(phy);
+
+	if (phylink_phy_no_inband(phy))
+		mode = MLO_AN_PHY;
+	else
+		mode = MLO_AN_INBAND;
+
+	/* Do the initial configuration */
+	ret = phylink_sfp_config(pl, mode, phy->supported, phy->advertising);
+	if (ret < 0)
+		return ret;
+
+	interface = pl->link_config.interface;
+	ret = phylink_attach_phy(pl, phy, interface);
+	if (ret < 0)
+		return ret;
+
+	ret = phylink_bringup_phy(pl, phy, interface);
+	if (ret)
+		phy_detach(phy);
+
+	return ret;
 }
 
 static void phylink_sfp_disconnect_phy(void *upstream)
@@ -1804,6 +1943,8 @@ static const struct sfp_upstream_ops sfp_phylink_ops = {
 	.attach = phylink_sfp_attach,
 	.detach = phylink_sfp_detach,
 	.module_insert = phylink_sfp_module_insert,
+	.module_start = phylink_sfp_module_start,
+	.module_stop = phylink_sfp_module_stop,
 	.link_up = phylink_sfp_link_up,
 	.link_down = phylink_sfp_link_down,
 	.connect_phy = phylink_sfp_connect_phy,