ath10k: add debugfs support to get power save state change of STA

This patch helps to get the power save state change of each peer
connected to the AP. With WMI_10_4_PEER_STA_PS_STATECHG_EVENTID
event, ps state of each peer is reported to user space via
debugfs.

Use the below command to get the ps state of each sta:
cat /sys/kernel/debug/ieee80211/phyX/netdev::wlanX/stations/
XX:XX:XX:XX:XX:XX/peer_ps_state

If STA is in power save state, we get the peer_ps_state value as 1.
if STA is not in power save state, we get the peer_ps_state value as 0.
If ps_state event is disabled, we get the peer_ps_state value as 2.

We can enable/disable the ps_state events using the debugfs flag
"ps_state_enable"

echo Y > /sys/kernel/debug/ieee80211/phyX/ath10k/ps_state_enable

Y = 1 to enable and Y = 0 to disable

Tested in QCA4019 with firmware ver 10.4-3.2.1.1-00011

Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 82 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index ada29a4cc9c8..2c0cb6757fc6 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -2398,6 +2398,85 @@ static const struct file_operations fops_warm_hw_reset = {
 	.llseek = default_llseek,
 };
 
+static void ath10k_peer_ps_state_disable(void *data,
+					 struct ieee80211_sta *sta)
+{
+	struct ath10k *ar = data;
+	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+
+	spin_lock_bh(&ar->data_lock);
+	arsta->peer_ps_state = WMI_PEER_PS_STATE_DISABLED;
+	spin_unlock_bh(&ar->data_lock);
+}
+
+static ssize_t ath10k_write_ps_state_enable(struct file *file,
+					    const char __user *user_buf,
+					    size_t count, loff_t *ppos)
+{
+	struct ath10k *ar = file->private_data;
+	int ret;
+	u32 param;
+	u8 ps_state_enable;
+
+	if (kstrtou8_from_user(user_buf, count, 0, &ps_state_enable))
+		return -EINVAL;
+
+	if (ps_state_enable > 1 || ps_state_enable < 0)
+		return -EINVAL;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (ar->ps_state_enable == ps_state_enable) {
+		ret = count;
+		goto exit;
+	}
+
+	param = ar->wmi.pdev_param->peer_sta_ps_statechg_enable;
+	ret = ath10k_wmi_pdev_set_param(ar, param, ps_state_enable);
+	if (ret) {
+		ath10k_warn(ar, "failed to enable ps_state_enable: %d\n",
+			    ret);
+		goto exit;
+	}
+	ar->ps_state_enable = ps_state_enable;
+
+	if (!ar->ps_state_enable)
+		ieee80211_iterate_stations_atomic(ar->hw,
+						  ath10k_peer_ps_state_disable,
+						  ar);
+
+	ret = count;
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+
+	return ret;
+}
+
+static ssize_t ath10k_read_ps_state_enable(struct file *file,
+					   char __user *user_buf,
+					   size_t count, loff_t *ppos)
+{
+	struct ath10k *ar = file->private_data;
+	int len = 0;
+	char buf[32];
+
+	mutex_lock(&ar->conf_mutex);
+	len = scnprintf(buf, sizeof(buf) - len, "%d\n",
+			ar->ps_state_enable);
+	mutex_unlock(&ar->conf_mutex);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static const struct file_operations fops_ps_state_enable = {
+	.read = ath10k_read_ps_state_enable,
+	.write = ath10k_write_ps_state_enable,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
 int ath10k_debug_create(struct ath10k *ar)
 {
 	ar->debug.cal_data = vzalloc(ATH10K_DEBUG_CAL_DATA_LEN);
@@ -2534,6 +2613,9 @@ int ath10k_debug_register(struct ath10k *ar)
 	debugfs_create_file("warm_hw_reset", 0600, ar->debug.debugfs_phy, ar,
 			    &fops_warm_hw_reset);
 
+	debugfs_create_file("ps_state_enable", 0600, ar->debug.debugfs_phy, ar,
+			    &fops_ps_state_enable);
+
 	return 0;
 }