ath11k: setup QCA6390 rings for both rxdmas

For QCA6390, only one pdev is created and this pdev manages both lmacs, thus
both rxdmas. So host needs to initialize all rxdma related rings for one pdev.

Another difference is for QCA6390, host fills rxbuf to firmware and firmware
further fills the rxbuf to rxbuf ring for each rxdma.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597555891-26112-4-git-send-email-kvalo@codeaurora.org

1 files changed, 25 insertions, 16 deletions

diff --git a/drivers/net/wireless/ath/ath11k/debug.c b/drivers/net/wireless/ath/ath11k/debug.c
index 60b961e59189..0a3cfa716390 100644
--- a/drivers/net/wireless/ath/ath11k/debug.c
+++ b/drivers/net/wireless/ath/ath11k/debug.c
@@ -698,8 +698,10 @@ static ssize_t ath11k_write_extd_rx_stats(struct file *file,
 					  size_t count, loff_t *ppos)
 {
 	struct ath11k *ar = file->private_data;
+	struct ath11k_base *ab = ar->ab;
 	struct htt_rx_ring_tlv_filter tlv_filter = {0};
 	u32 enable, rx_filter = 0, ring_id;
+	int i;
 	int ret;
 
 	if (kstrtouint_from_user(ubuf, count, 0, &enable))
@@ -742,14 +744,16 @@ static ssize_t ath11k_write_extd_rx_stats(struct file *file,
 
 	ar->debug.rx_filter = tlv_filter.rx_filter;
 
-	ring_id = ar->dp.rx_mon_status_refill_ring.refill_buf_ring.ring_id;
-	ret = ath11k_dp_tx_htt_rx_filter_setup(ar->ab, ring_id, ar->dp.mac_id,
-					       HAL_RXDMA_MONITOR_STATUS,
-					       DP_RX_BUFFER_SIZE, &tlv_filter);
+	for (i = 0; i < ab->hw_params.num_rxmda_per_pdev; i++) {
+		ring_id = ar->dp.rx_mon_status_refill_ring[i].refill_buf_ring.ring_id;
+		ret = ath11k_dp_tx_htt_rx_filter_setup(ar->ab, ring_id, ar->dp.mac_id,
+						       HAL_RXDMA_MONITOR_STATUS,
+						       DP_RX_BUFFER_SIZE, &tlv_filter);
 
-	if (ret) {
-		ath11k_warn(ar->ab, "failed to set rx filter for monitor status ring\n");
-		goto exit;
+		if (ret) {
+			ath11k_warn(ar->ab, "failed to set rx filter for monitor status ring\n");
+			goto exit;
+		}
 	}
 
 	ar->debug.extd_rx_stats = enable;
@@ -1000,10 +1004,11 @@ static ssize_t ath11k_write_pktlog_filter(struct file *file,
 					  size_t count, loff_t *ppos)
 {
 	struct ath11k *ar = file->private_data;
+	struct ath11k_base *ab = ar->ab;
 	struct htt_rx_ring_tlv_filter tlv_filter = {0};
 	u32 rx_filter = 0, ring_id, filter, mode;
 	u8 buf[128] = {0};
-	int ret;
+	int i, ret;
 	ssize_t rc;
 
 	mutex_lock(&ar->conf_mutex);
@@ -1084,16 +1089,20 @@ static ssize_t ath11k_write_pktlog_filter(struct file *file,
 					       HTT_RX_FP_DATA_FILTER_FLASG3;
 	}
 
-	ring_id = ar->dp.rx_mon_status_refill_ring.refill_buf_ring.ring_id;
-	ret = ath11k_dp_tx_htt_rx_filter_setup(ar->ab, ring_id, ar->dp.mac_id,
-					       HAL_RXDMA_MONITOR_STATUS,
-					       DP_RX_BUFFER_SIZE, &tlv_filter);
-	if (ret) {
-		ath11k_warn(ar->ab, "failed to set rx filter for monitor status ring\n");
-		goto out;
+	for (i = 0; i < ab->hw_params.num_rxmda_per_pdev; i++) {
+		ring_id = ar->dp.rx_mon_status_refill_ring[i].refill_buf_ring.ring_id;
+		ret = ath11k_dp_tx_htt_rx_filter_setup(ab, ring_id,
+						       ar->dp.mac_id + i,
+						       HAL_RXDMA_MONITOR_STATUS,
+						       DP_RX_BUFFER_SIZE, &tlv_filter);
+
+		if (ret) {
+			ath11k_warn(ab, "failed to set rx filter for moniter status ring\n");
+			goto out;
+		}
 	}
 
-	ath11k_dbg(ar->ab, ATH11K_DBG_WMI, "pktlog filter %d mode %s\n",
+	ath11k_dbg(ab, ATH11K_DBG_WMI, "pktlog filter %d mode %s\n",
 		   filter, ((mode == ATH11K_PKTLOG_MODE_FULL) ? "full" : "lite"));
 
 	ar->debug.pktlog_filter = filter;