brcmfmac: map 802.1d priority to precedence level based on AP WMM params

In WLAN, priority among various access categories of traffic is
always set by the AP using WMM parameters and this may not always
follow the standard 802.1d priority.

In this change, priority is adjusted based on the AP WMM params
received as part of the Assoc Response and the same is later used
to map the priority of all incoming traffic.

In a specific scenario where EDCA parameters are configured to be same
for all ACs, use the default FW priority definition to avoid queuing
packets of all ACs to the same priority queue.

This change fixes the following 802.11 certification tests:
* 11n - 5.2.31 ACM Bit Conformance test
* 11n - 5.2.32 AC Parameter Modification test
* 11ac - 5.2.33 TXOP Limit test

Signed-off-by: Saravanan Shanmugham <saravanan.shanmugham@cypress.com>
Signed-off-by: Justin Li <justin.li@cypress.com>
Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1588661487-21884-2-git-send-email-chi-hsien.lin@cypress.com

1 files changed, 3 insertions, 23 deletions

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
index 2b7837887c0b..09701262330d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
@@ -311,28 +311,6 @@ struct brcmf_skbuff_cb {
 /* How long to defer borrowing in jiffies */
 #define BRCMF_FWS_BORROW_DEFER_PERIOD		(HZ / 10)
 
-/**
- * enum brcmf_fws_fifo - fifo indices used by dongle firmware.
- *
- * @BRCMF_FWS_FIFO_FIRST: first fifo, ie. background.
- * @BRCMF_FWS_FIFO_AC_BK: fifo for background traffic.
- * @BRCMF_FWS_FIFO_AC_BE: fifo for best-effort traffic.
- * @BRCMF_FWS_FIFO_AC_VI: fifo for video traffic.
- * @BRCMF_FWS_FIFO_AC_VO: fifo for voice traffic.
- * @BRCMF_FWS_FIFO_BCMC: fifo for broadcast/multicast (AP only).
- * @BRCMF_FWS_FIFO_ATIM: fifo for ATIM (AP only).
- * @BRCMF_FWS_FIFO_COUNT: number of fifos.
- */
-enum brcmf_fws_fifo {
-	BRCMF_FWS_FIFO_FIRST,
-	BRCMF_FWS_FIFO_AC_BK = BRCMF_FWS_FIFO_FIRST,
-	BRCMF_FWS_FIFO_AC_BE,
-	BRCMF_FWS_FIFO_AC_VI,
-	BRCMF_FWS_FIFO_AC_VO,
-	BRCMF_FWS_FIFO_BCMC,
-	BRCMF_FWS_FIFO_ATIM,
-	BRCMF_FWS_FIFO_COUNT
-};
 
 /**
  * enum brcmf_fws_txstatus - txstatus flag values.
@@ -2130,8 +2108,10 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb)
 	skcb->if_flags = 0;
 	skcb->state = BRCMF_FWS_SKBSTATE_NEW;
 	brcmf_skb_if_flags_set_field(skb, INDEX, ifp->ifidx);
+
+	/* mapping from 802.1d priority to firmware fifo index */
 	if (!multicast)
-		fifo = brcmf_fws_prio2fifo[skb->priority];
+		fifo = brcmf_map_prio_to_aci(drvr->config, skb->priority);
 
 	brcmf_fws_lock(fws);
 	if (fifo != BRCMF_FWS_FIFO_AC_BE && fifo < BRCMF_FWS_FIFO_BCMC)