diff options
| author |   Linus Torvalds <torvalds@linux-foundation.org> | 2022-08-02 08:15:25 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-08-02 08:15:25 -0700 |
| commit | 3976d758e045ed0485e0e665fb3b6692572576d7 (patch) | |
| tree | 11918dfab24b4daa98293d49dc089809b5dd6e92 /Documentation/devicetree/bindings | |
| parent | Merge tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc (diff) | |
| parent | dt-bindings: soc: bcm: use absolute path to other schema (diff) | |
| download | wireguard-linux-3976d758e045ed0485e0e665fb3b6692572576d7.tar.xz wireguard-linux-3976d758e045ed0485e0e665fb3b6692572576d7.zip | |
Merge tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann:
"As usual, the bulk of the changes for the SoC tree are devicetree file
updates, and most of these changes are for 64-bit embedded machines.
As before, there are a ton of style cleanups, and additional hardware
support for existing machines.
Looking only at the new SoC, the notable additions are:
- A whole family of Broadcom broadband SoCs, both 32-bit and 64-bit:
BCM63178, BCM63158, BCM4912, BCM6858, BCM6878, BCM6846, BCM63146,
BCM6856, BCM6855, BCM6756, BCM63148, and BCM6813. Each SoC comes
with a corresponding reference board.
- The new NXP i.MX93 SoC, the follow-up to the popular i.MX6 and
i.MX8 embedded SoCs, now using Cortex-A55 cores and the Ethos-U65
NPU.
- Qualcomm Snapdragon 8cx Gen3 (SC8280XP), the current high end of
Arm based Laptop SoCs, and its automotive cousin, the SA8540P. The
SC8280XP is used in the Lenovo Thinkpad X13s laptop that also gets
added here in addition to the reference boards.
- Allwinner H616, a newer version of the H6 SoC, targeted at
Set-top-box applications. It comes with dts files for the Orange Pi
zero2 single-board computer and the X96 Mate set-top-box
- Marvell Prestera 98DX2530 (AlleyCat5), a network switch chip in the
Armada SoC family based on the Cortex-A55 core.
New machines based on previously supported SoCs include:
- Several new machines on NXP i.MX platforms: multiple Toradex
Colibri boards using the "Iris" and "Ixora" carriers, DH
electronics i.MX8M Plus DHCOM and PDK2, TQ-Systems TQMa8MPQL, and
phytech phyBOARD-Polis-i.MX8MM.
- Google Chameleon v3 FPGA board based on Intel Arria10 and Stratix
10 Software Virtual platform, both in the SoCFPGA platform.
- Two new wireless devices based on Broadcom SoCs: The Asus GT-AX6000
Router and the Cisco Meraki MR26 access point
- Improved Chromebook support for both the Mediatek and Qualcomm SoC
families brought added machines: Acer Chromebook 514 (MT8192), Acer
Chromebook Spin 513 (MT8195) and a couple of SC7180 based machines
including the Lenovo IdeaPad Chromebook Duet 3.
- Xiaomi Mi Mix2s, LG G7 and LG V35 are mobile phones based on
Qualcomm SDM845, while Mi 5s Plus is based on MSM8996.
- Finally, there are a few development board on other chips: PCB8309
(Microchip lan966x), Radxa Rock Pi S (Rockchips RK3308) DH DRC
Compact (ST STM32MP1) and Inforce IFC6560 (Qualcomm SDM660)"
* tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (829 commits)
dt-bindings: soc: bcm: use absolute path to other schema
dt-bindings: soc: bcm: drop quotes when not needed
dt-bindings: soc: microchip: use absolute path to other schema
dt-bindings: soc: microchip: drop quotes when not needed
ARM: dts: lan966x: keep lan966 entries alphabetically sorted
ARM: dts: lan966x: add support for pcb8309
dt-bindings: arm: at91: add lan966 pcb8309 board
ARM: dts: lan966x: Enable network driver on pcb8291
ARM: dts: lan966x: Disable can0 on pcb8291
ARM: dts: lan966x: Add gpio-restart
dt-bindings: arm: aspeed: add Aspeed Evaluation boards
arm64: dts: qcom: Add support for Xiaomi Mi Mix2s
dt-bindings: arm: qcom: Add Xiaomi Mi Mix2s bindings
dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices
dt-bindings: arm: qcom: add missing SM6350 board compatibles
dt-bindings: arm: qcom: add missing SM6125 board compatibles
dt-bindings: arm: qcom: add missing SDM845 board compatibles
dt-bindings: arm: qcom: add missing SDM636 board compatibles
dt-bindings: arm: qcom: add missing SDM630 board compatibles
dt-bindings: arm: qcom: add missing QCS404 board compatibles
...
Diffstat (limited to 'Documentation/devicetree/bindings')
51 files changed, 2050 insertions, 382 deletions
diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml index 5e2017c0a051..e6de1d7f516c 100644 --- a/Documentation/devicetree/bindings/arm/altera.yaml +++ b/Documentation/devicetree/bindings/arm/altera.yaml @@ -25,7 +25,14 @@ properties: items: - enum: - altr,socfpga-arria10-socdk - - enclustra,mercury-aa1 + - const: altr,socfpga-arria10 + - const: altr,socfpga + + - description: Mercury+ AA1 boards + items: + - enum: + - google,chameleon-v3 + - const: enclustra,mercury-aa1 - const: altr,socfpga-arria10 - const: altr,socfpga @@ -47,6 +54,7 @@ properties: items: - enum: - altr,socfpga-stratix10-socdk + - altr,socfpga-stratix10-swvp - const: altr,socfpga-stratix10 - description: SoCFPGA VT diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml new file mode 100644 index 000000000000..1895ce9de461 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed SoC based boards + +maintainers: + - Joel Stanley <joel@jms.id.au> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: AST2400 based boards + items: + - enum: + - facebook,galaxy100-bmc + - facebook,wedge100-bmc + - facebook,wedge40-bmc + - microsoft,olympus-bmc + - quanta,q71l-bmc + - tyan,palmetto-bmc + - yadro,vesnin-bmc + - const: aspeed,ast2400 + + - description: AST2500 based boards + items: + - enum: + - amd,ethanolx-bmc + - ampere,mtjade-bmc + - aspeed,ast2500-evb + - asrock,e3c246d4i-bmc + - asrock,romed8hm3-bmc + - bytedance,g220a-bmc + - facebook,cmm-bmc + - facebook,minipack-bmc + - facebook,tiogapass-bmc + - facebook,yamp-bmc + - facebook,yosemitev2-bmc + - facebook,wedge400-bmc + - hxt,stardragon4800-rep2-bmc + - ibm,mihawk-bmc + - ibm,mowgli-bmc + - ibm,romulus-bmc + - ibm,swift-bmc + - ibm,witherspoon-bmc + - ingrasys,zaius-bmc + - inspur,fp5280g2-bmc + - inspur,nf5280m6-bmc + - inspur,on5263m5-bmc + - intel,s2600wf-bmc + - inventec,lanyang-bmc + - lenovo,hr630-bmc + - lenovo,hr855xg2-bmc + - portwell,neptune-bmc + - qcom,centriq2400-rep-bmc + - supermicro,x11spi-bmc + - tyan,s7106-bmc + - tyan,s8036-bmc + - yadro,nicole-bmc + - yadro,vegman-n110-bmc + - yadro,vegman-rx20-bmc + - yadro,vegman-sx20-bmc + - const: aspeed,ast2500 + + - description: AST2600 based boards + items: + - enum: + - aspeed,ast2600-evb + - aspeed,ast2600-evb-a1 + - facebook,bletchley-bmc + - facebook,cloudripper-bmc + - facebook,elbert-bmc + - facebook,fuji-bmc + - ibm,everest-bmc + - ibm,rainier-bmc + - ibm,tacoma-bmc + - inventec,transformer-bmc + - jabil,rbp-bmc + - nuvia,dc-scm-bmc + - quanta,s6q-bmc + - const: aspeed,ast2600 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml index 4e495e03264b..2b7848bb7769 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml +++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml @@ -163,9 +163,11 @@ properties: - const: microchip,sama7g5 - const: microchip,sama7 - - description: Microchip LAN9662 PCB8291 Evaluation Board. + - description: Microchip LAN9662 Evaluation Boards. items: - - const: microchip,lan9662-pcb8291 + - enum: + - microchip,lan9662-pcb8291 + - microchip,lan9662-pcb8309 - const: microchip,lan9662 - const: microchip,lan966 diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml index 8b7e87fb6c34..958df32b4899 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -87,6 +87,13 @@ properties: - const: brcm,bcm53012 - const: brcm,bcm4708 + - description: BCM53015 based boards + items: + - enum: + - meraki,mr26 + - const: brcm,bcm53015 + - const: brcm,bcm4708 + - description: BCM53016 based boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml index 5fb455840417..324e59104360 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml @@ -28,6 +28,99 @@ properties: - const: brcm,bcm47622 - const: brcm,bcmbca + - description: BCM4912 based boards + items: + - enum: + - asus,gt-ax6000 + - brcm,bcm94912 + - const: brcm,bcm4912 + - const: brcm,bcmbca + + - description: BCM63138 based boards + items: + - enum: + - brcm,bcm963138 + - brcm,BCM963138DVT + - const: brcm,bcm63138 + - const: brcm,bcmbca + + - description: BCM63146 based boards + items: + - enum: + - brcm,bcm963146 + - const: brcm,bcm63146 + - const: brcm,bcmbca + + - description: BCM63148 based boards + items: + - enum: + - brcm,bcm963148 + - const: brcm,bcm63148 + - const: brcm,bcmbca + + - description: BCM63158 based boards + items: + - enum: + - brcm,bcm963158 + - const: brcm,bcm63158 + - const: brcm,bcmbca + + - description: BCM63178 based boards + items: + - enum: + - brcm,bcm963178 + - const: brcm,bcm63178 + - const: brcm,bcmbca + + - description: BCM6756 based boards + items: + - enum: + - brcm,bcm96756 + - const: brcm,bcm6756 + - const: brcm,bcmbca + + - description: BCM6813 based boards + items: + - enum: + - brcm,bcm96813 + - const: brcm,bcm6813 + - const: brcm,bcmbca + + - description: BCM6846 based boards + items: + - enum: + - brcm,bcm96846 + - const: brcm,bcm6846 + - const: brcm,bcmbca + + - description: BCM6855 based boards + items: + - enum: + - brcm,bcm96855 + - const: brcm,bcm6855 + - const: brcm,bcmbca + + - description: BCM6856 based boards + items: + - enum: + - brcm,bcm96856 + - const: brcm,bcm6856 + - const: brcm,bcmbca + + - description: BCM6858 based boards + items: + - enum: + - brcm,bcm96858 + - const: brcm,bcm6858 + - const: brcm,bcmbca + + - description: BCM6878 based boards + items: + - enum: + - brcm,bcm96878 + - const: brcm,bcm6878 + - const: brcm,bcmbca + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt deleted file mode 100644 index a87ec15e28d2..000000000000 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ /dev/null @@ -1,271 +0,0 @@ -NXP i.MX System Controller Firmware (SCFW) --------------------------------------------------------------------- - -The System Controller Firmware (SCFW) is a low-level system function -which runs on a dedicated Cortex-M core to provide power, clock, and -resource management. It exists on some i.MX8 processors. e.g. i.MX8QM -(QM, QP), and i.MX8QX (QXP, DX). - -The AP communicates with the SC using a multi-ported MU module found -in the LSIO subsystem. The current definition of this MU module provides -5 remote AP connections to the SC to support up to 5 execution environments -(TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces -with the LSIO DSC IP bus. The SC firmware will communicate with this MU -using the MSI bus. - -System Controller Device Node: -============================================================ - -The scu node with the following properties shall be under the /firmware/ node. - -Required properties: -------------------- -- compatible: should be "fsl,imx-scu". -- mbox-names: should include "tx0", "tx1", "tx2", "tx3", - "rx0", "rx1", "rx2", "rx3"; - include "gip3" if want to support general MU interrupt. -- mboxes: List of phandle of 4 MU channels for tx, 4 MU channels for - rx, and 1 optional MU channel for general interrupt. - All MU channels must be in the same MU instance. - Cross instances are not allowed. The MU instance can only - be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need - to make sure use the one which is not conflict with other - execution environments. e.g. ATF. - Note: - Channel 0 must be "tx0" or "rx0". - Channel 1 must be "tx1" or "rx1". - Channel 2 must be "tx2" or "rx2". - Channel 3 must be "tx3" or "rx3". - General interrupt rx channel must be "gip3". - e.g. - mboxes = <&lsio_mu1 0 0 - &lsio_mu1 0 1 - &lsio_mu1 0 2 - &lsio_mu1 0 3 - &lsio_mu1 1 0 - &lsio_mu1 1 1 - &lsio_mu1 1 2 - &lsio_mu1 1 3 - &lsio_mu1 3 3>; - See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml - for detailed mailbox binding. - -Note: Each mu which supports general interrupt should have an alias correctly -numbered in "aliases" node. -e.g. -aliases { - mu1 = &lsio_mu1; -}; - -i.MX SCU Client Device Node: -============================================================ - -Client nodes are maintained as children of the relevant IMX-SCU device node. - -Power domain bindings based on SCU Message Protocol ------------------------------------------------------------- - -This binding for the SCU power domain providers uses the generic power -domain binding[2]. - -Required properties: -- compatible: Should be one of: - "fsl,imx8qm-scu-pd", - "fsl,imx8qxp-scu-pd" - followed by "fsl,scu-pd" - -- #power-domain-cells: Must be 1. Contains the Resource ID used by - SCU commands. - See detailed Resource ID list from: - include/dt-bindings/firmware/imx/rsrc.h - -Clock bindings based on SCU Message Protocol ------------------------------------------------------------- - -This binding uses the common clock binding[1]. - -Required properties: -- compatible: Should be one of: - "fsl,imx8dxl-clk" - "fsl,imx8qm-clk" - "fsl,imx8qxp-clk" - followed by "fsl,scu-clk" -- #clock-cells: Should be 2. - Contains the Resource and Clock ID value. -- clocks: List of clock specifiers, must contain an entry for - each required entry in clock-names -- clock-names: Should include entries "xtal_32KHz", "xtal_24MHz" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. - -See the full list of clock IDs from: -include/dt-bindings/clock/imx8qxp-clock.h - -Pinctrl bindings based on SCU Message Protocol ------------------------------------------------------------- - -This binding uses the i.MX common pinctrl binding[3]. - -Required properties: -- compatible: Should be one of: - "fsl,imx8qm-iomuxc", - "fsl,imx8qxp-iomuxc", - "fsl,imx8dxl-iomuxc". - -Required properties for Pinctrl sub nodes: -- fsl,pins: Each entry consists of 3 integers which represents - the mux and config setting for one pin. The first 2 - integers <pin_id mux_mode> are specified using a - PIN_FUNC_ID macro, which can be found in - <dt-bindings/pinctrl/pads-imx8qm.h>, - <dt-bindings/pinctrl/pads-imx8qxp.h>, - <dt-bindings/pinctrl/pads-imx8dxl.h>. - The last integer CONFIG is the pad setting value like - pull-up on this pin. - - Please refer to i.MX8QXP Reference Manual for detailed - CONFIG settings. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/power/power-domain.yaml -[3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt - -RTC bindings based on SCU Message Protocol ------------------------------------------------------------- - -Required properties: -- compatible: should be "fsl,imx8qxp-sc-rtc"; - -OCOTP bindings based on SCU Message Protocol ------------------------------------------------------------- -Required properties: -- compatible: Should be one of: - "fsl,imx8qm-scu-ocotp", - "fsl,imx8qxp-scu-ocotp". -- #address-cells: Must be 1. Contains byte index -- #size-cells: Must be 1. Contains byte length - -Optional Child nodes: - -- Data cells of ocotp: - Detailed bindings are described in bindings/nvmem/nvmem.txt - -Watchdog bindings based on SCU Message Protocol ------------------------------------------------------------- - -Required properties: -- compatible: should be: - "fsl,imx8qxp-sc-wdt" - followed by "fsl,imx-sc-wdt"; -Optional properties: -- timeout-sec: contains the watchdog timeout in seconds. - -SCU key bindings based on SCU Message Protocol ------------------------------------------------------------- - -Required properties: -- compatible: should be: - "fsl,imx8qxp-sc-key" - followed by "fsl,imx-sc-key"; -- linux,keycodes: See Documentation/devicetree/bindings/input/input.yaml - -Thermal bindings based on SCU Message Protocol ------------------------------------------------------------- - -Required properties: -- compatible: Should be : - "fsl,imx8qxp-sc-thermal" - followed by "fsl,imx-sc-thermal"; - -- #thermal-sensor-cells: See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml - for a description. - -Example (imx8qxp): -------------- -aliases { - mu1 = &lsio_mu1; -}; - -lsio_mu1: mailbox@5d1c0000 { - ... - #mbox-cells = <2>; -}; - -firmware { - scu { - compatible = "fsl,imx-scu"; - mbox-names = "tx0", "tx1", "tx2", "tx3", - "rx0", "rx1", "rx2", "rx3", - "gip3"; - mboxes = <&lsio_mu1 0 0 - &lsio_mu1 0 1 - &lsio_mu1 0 2 - &lsio_mu1 0 3 - &lsio_mu1 1 0 - &lsio_mu1 1 1 - &lsio_mu1 1 2 - &lsio_mu1 1 3 - &lsio_mu1 3 3>; - - clk: clk { - compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; - #clock-cells = <2>; - }; - - iomuxc { - compatible = "fsl,imx8qxp-iomuxc"; - - pinctrl_lpuart0: lpuart0grp { - fsl,pins = < - SC_P_UART0_RX_ADMA_UART0_RX 0x06000020 - SC_P_UART0_TX_ADMA_UART0_TX 0x06000020 - >; - }; - ... - }; - - ocotp: imx8qx-ocotp { - compatible = "fsl,imx8qxp-scu-ocotp"; - #address-cells = <1>; - #size-cells = <1>; - - fec_mac0: mac@2c4 { - reg = <0x2c4 8>; - }; - }; - - pd: imx8qx-pd { - compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; - #power-domain-cells = <1>; - }; - - rtc: rtc { - compatible = "fsl,imx8qxp-sc-rtc"; - }; - - scu_key: scu-key { - compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; - linux,keycodes = <KEY_POWER>; - }; - - watchdog { - compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; - timeout-sec = <60>; - }; - - tsens: thermal-sensor { - compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal"; - #thermal-sensor-cells = <1>; - }; - }; -}; - -serial@5a060000 { - ... - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpuart0>; - clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>; - clock-names = "ipg"; - power-domains = <&pd IMX_SC_R_UART_0>; -}; diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index ef524378d449..7431579ab0e8 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -321,6 +321,7 @@ properties: - enum: - toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board + - toradex,apalis_imx6q-ixora-v1.2 # Apalis iMX6Q/D Module on Ixora V1.2 Carrier Board - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board - const: toradex,apalis_imx6q - const: fsl,imx6q @@ -670,30 +671,30 @@ properties: - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules items: - enum: - - toradex,colibri-imx6ull-aster # Colibri iMX6ULL Module on Aster Carrier Board - - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board V3 - - toradex,colibri-imx6ull-iris # Colibri iMX6ULL Module on Iris Carrier Board - - toradex,colibri-imx6ull-iris-v2 # Colibri iMX6ULL Module on Iris V2 Carrier Board + - toradex,colibri-imx6ull-aster # Aster Carrier Board + - toradex,colibri-imx6ull-eval # Colibri Evaluation Board V3 + - toradex,colibri-imx6ull-iris # Iris Carrier Board + - toradex,colibri-imx6ull-iris-v2 # Iris V2 Carrier Board - const: toradex,colibri-imx6ull # Colibri iMX6ULL Module - const: fsl,imx6ull - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module items: - enum: - - toradex,colibri-imx6ull-emmc-aster # Colibri iMX6ULL 1G (eMMC) on Aster Carrier Board - - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1G (eMMC) on Colibri Evaluation B. V3 - - toradex,colibri-imx6ull-emmc-iris # Colibri iMX6ULL 1G (eMMC) on Iris Carrier Board - - toradex,colibri-imx6ull-emmc-iris-v2 # Colibri iMX6ULL 1G (eMMC) on Iris V2 Carrier Board + - toradex,colibri-imx6ull-emmc-aster # Aster Carrier Board + - toradex,colibri-imx6ull-emmc-eval # Colibri Evaluation B. V3 + - toradex,colibri-imx6ull-emmc-iris # Iris Carrier Board + - toradex,colibri-imx6ull-emmc-iris-v2 # Iris V2 Carrier Board - const: toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module - const: fsl,imx6ull - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules items: - enum: - - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Eval. B. V3 - - toradex,colibri-imx6ull-wifi-aster # Colibri iMX6ULL Wi-Fi / BT M. on Aster Carrier Board - - toradex,colibri-imx6ull-wifi-iris # Colibri iMX6ULL Wi-Fi / BT M. on Iris Carrier Board - - toradex,colibri-imx6ull-wifi-iris-v2 # Colibri iMX6ULL Wi-Fi / BT M. on Iris V2 Carrier Board + - toradex,colibri-imx6ull-wifi-eval # Colibri Eval. B. V3 + - toradex,colibri-imx6ull-wifi-aster # Aster Carrier Board + - toradex,colibri-imx6ull-wifi-iris # Iris Carrier Board + - toradex,colibri-imx6ull-wifi-iris-v2 # Iris V2 Carrier Board - const: toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Module - const: fsl,imx6ull @@ -738,6 +739,8 @@ properties: - enum: - toradex,colibri-imx7s-aster # Module on Aster Carrier Board - toradex,colibri-imx7s-eval-v3 # Module on Colibri Evaluation Board V3 + - toradex,colibri-imx7s-iris # Module on Iris Carrier Board + - toradex,colibri-imx7s-iris-v2 # Module on Iris Carrier Board V2 - const: toradex,colibri-imx7s - const: fsl,imx7s @@ -789,8 +792,10 @@ properties: - description: i.MX7D Boards with Toradex Colibri i.MX7D Module items: - enum: - - toradex,colibri-imx7d-aster # Colibri iMX7D Module on Aster Carrier Board - - toradex,colibri-imx7d-eval-v3 # Colibri iMX7D Module on Colibri Evaluation Board V3 + - toradex,colibri-imx7d-aster # Aster Carrier Board + - toradex,colibri-imx7d-eval-v3 # Colibri Evaluation Board V3 + - toradex,colibri-imx7d-iris # Iris Carrier Board + - toradex,colibri-imx7d-iris-v2 # Iris Carrier Board V2 - const: toradex,colibri-imx7d - const: fsl,imx7d @@ -799,6 +804,8 @@ properties: - enum: - toradex,colibri-imx7d-emmc-aster # Module on Aster Carrier Board - toradex,colibri-imx7d-emmc-eval-v3 # Module on Colibri Evaluation Board V3 + - toradex,colibri-imx7d-emmc-iris # Module on Iris Carrier Board + - toradex,colibri-imx7d-emmc-iris-v2 # Module on Iris Carrier Board V2 - const: toradex,colibri-imx7d-emmc - const: fsl,imx7d @@ -865,6 +872,12 @@ properties: - const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module - const: fsl,imx8mm + - description: PHYTEC phyCORE-i.MX8MM SoM based boards + items: + - const: phytec,imx8mm-phyboard-polis-rdk # phyBOARD-Polis RDK + - const: phytec,imx8mm-phycore-som # phyCORE-i.MX8MM SoM + - const: fsl,imx8mm + - description: Variscite VAR-SOM-MX8MM based boards items: - const: variscite,var-som-mx8mm-symphony @@ -914,6 +927,8 @@ properties: - description: i.MX8MP based Boards items: - enum: + - dh,imx8mp-dhcom-som # i.MX8MP DHCOM SoM + - dh,imx8mp-dhcom-pdk2 # i.MX8MP DHCOM SoM on PDK2 board - fsl,imx8mp-evk # i.MX8MP EVK Board - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board - toradex,verdin-imx8mp # Verdin iMX8M Plus Modules @@ -952,6 +967,18 @@ properties: - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module - const: fsl,imx8mp + - description: + TQMa8MPxL is a series of LGA SOM featuring NXP i.MX8MP system-on-chip + variants. It is designed to be soldered on different carrier boards. + All CPU variants use the same device tree hence only one compatible + is needed. MBa8MPxL mainboard can be used as starterkit or in a boxed + version as an industrial computing device. + items: + - enum: + - tq,imx8mp-tqma8mpql-mba8mpxl # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MPxL + - const: tq,imx8mp-tqma8mpql # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM + - const: fsl,imx8mp + - description: i.MX8MQ based Boards items: - enum: @@ -1020,6 +1047,12 @@ properties: - fsl,imx8ulp-evk # i.MX8ULP EVK Board - const: fsl,imx8ulp + - description: i.MX93 based Boards + items: + - enum: + - fsl,imx93-11x11-evk # i.MX93 11x11 EVK Board + - const: fsl,imx93 + - description: Freescale Vybrid Platform Device Tree Bindings diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml new file mode 100644 index 000000000000..8960fb8b2b2f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/marvell/marvell,ac5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Alleycat5/5X Platforms + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Alleycat5 (98DX25xx) Reference Design + items: + - enum: + - marvell,rd-ac5 + - const: marvell,ac5 + + - description: Alleycat5X (98DX35xx) Reference Design + items: + - enum: + - marvell,rd-ac5x + - const: marvell,ac5x + - const: marvell,ac5 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 4a2bd9759c47..07c0ea94e850 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -131,6 +131,36 @@ properties: - enum: - mediatek,mt8183-evb - const: mediatek,mt8183 + - description: Google Hayato + items: + - const: google,hayato-rev1 + - const: google,hayato + - const: mediatek,mt8192 + - description: Google Spherion (Acer Chromebook 514) + items: + - const: google,spherion-rev3 + - const: google,spherion-rev2 + - const: google,spherion-rev1 + - const: google,spherion-rev0 + - const: google,spherion + - const: mediatek,mt8192 + - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H) + items: + - enum: + - google,tomato-rev2 + - google,tomato-rev1 + - const: google,tomato + - const: mediatek,mt8195 + - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H) + items: + - const: google,tomato-rev4 + - const: google,tomato-rev3 + - const: google,tomato + - const: mediatek,mt8195 + - items: + - enum: + - mediatek,mt8186-evb + - const: mediatek,mt8186 - items: - enum: - mediatek,mt8192-evb diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml index 611f666f359d..8585f6f18f69 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml @@ -26,6 +26,7 @@ properties: - mediatek,mt8135-pericfg - mediatek,mt8173-pericfg - mediatek,mt8183-pericfg + - mediatek,mt8186-pericfg - mediatek,mt8195-pericfg - mediatek,mt8516-pericfg - const: syscon diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 6208558e1036..fb1d00bcc847 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -38,18 +38,24 @@ description: | msm8992 msm8994 msm8996 + msm8998 + qcs404 sa8155p sa8540p sc7180 sc7280 sc8180x sc8280xp + sda660 sdm630 sdm632 + sdm636 sdm660 sdm845 sdx55 sdx65 + sm6125 + sm6350 sm7225 sm8150 sm8250 @@ -90,6 +96,11 @@ description: | A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in foundry 2. + There are many devices in the list below that run the standard ChromeOS + bootloader setup and use the open source depthcharge bootloader to boot the + OS. These devices do not use the scheme described above. For details, see: + https://docs.kernel.org/arm/google/chromebook-boot-flow.html + properties: $nodename: const: "/" @@ -153,28 +164,50 @@ properties: - const: qcom,msm8974 - items: - - enum: - - alcatel,idol347 - - const: qcom,msm8916-mtp/1 - const: qcom,msm8916-mtp + - const: qcom,msm8916-mtp/1 - const: qcom,msm8916 - items: - enum: - - longcheer,l8150 + - alcatel,idol347 + - asus,z00l + - huawei,g7 + - longcheer,l8910 - samsung,a3u-eur - samsung,a5u-eur + - samsung,j5 + - samsung,serranove + - wingtech,wt88047 + - const: qcom,msm8916 + + - items: + - const: longcheer,l8150 + - const: qcom,msm8916-v1-qrd/9-v1 - const: qcom,msm8916 - items: - enum: + - lg,bullhead + - microsoft,talkman + - xiaomi,libra + - const: qcom,msm8992 + + - items: + - enum: - sony,karin_windy + - const: qcom,apq8094 + + - items: + - enum: + - huawei,angler + - microsoft,cityman + - sony,ivy-row - sony,karin-row - sony,satsuki-row - sony,sumire-row - sony,suzuran-row - - qcom,msm8994 - - const: qcom,apq8094 + - const: qcom,msm8994 - items: - enum: @@ -190,11 +223,26 @@ properties: - sony,kagura-row - sony,keyaki-row - xiaomi,gemini + - xiaomi,natrium - xiaomi,scorpio - const: qcom,msm8996 - items: - enum: + - asus,novago-tp370ql + - fxtec,pro1 + - hp,envy-x2 + - lenovo,miix-630 + - oneplus,cheeseburger + - oneplus,dumpling + - qcom,msm8998-mtp + - sony,xperia-lilac + - sony,xperia-maple + - sony,xperia-poplar + - const: qcom,msm8998 + + - items: + - enum: - qcom,ipq4019-ap-dk01.1-c1 - qcom,ipq4019-ap-dk04.1-c3 - qcom,ipq4019-ap-dk07.1-c1 @@ -214,19 +262,317 @@ properties: - qcom,ipq8074-hk10-c2 - const: qcom,ipq8074 - - items: + - description: Qualcomm Technologies, Inc. SC7180 IDP + items: - enum: - qcom,sc7180-idp - const: qcom,sc7180 - - items: - - enum: - - qcom,sc7280-crd - - qcom,sc7280-idp - - qcom,sc7280-idp2 - - google,hoglin - - google,piglin - - google,senor + - description: HP Chromebook x2 11c (rev1 - 2) + items: + - const: google,coachz-rev1 + - const: google,coachz-rev2 + - const: qcom,sc7180 + + - description: HP Chromebook x2 11c (newest rev) + items: + - const: google,coachz + - const: qcom,sc7180 + + - description: HP Chromebook x2 11c with LTE (rev1 - 2) + items: + - const: google,coachz-rev1-sku0 + - const: google,coachz-rev2-sku0 + - const: qcom,sc7180 + + - description: HP Chromebook x2 11c with LTE (newest rev) + items: + - const: google,coachz-sku0 + - const: qcom,sc7180 + + - description: Lenovo Chromebook Duet 5 13 (rev2) + items: + - const: google,homestar-rev2 + - const: google,homestar-rev23 + - const: qcom,sc7180 + + - description: Lenovo Chromebook Duet 5 13 (rev3) + items: + - const: google,homestar-rev3 + - const: qcom,sc7180 + + - description: Lenovo Chromebook Duet 5 13 (newest rev) + items: + - const: google,homestar + - const: qcom,sc7180 + + - description: Google Kingoftown (rev0) + items: + - const: google,kingoftown-rev0 + - const: qcom,sc7180 + + - description: Google Kingoftown (newest rev) + items: + - const: google,kingoftown + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 (rev0) + items: + - const: google,lazor-rev0 + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 (rev1 - 2) + items: + - const: google,lazor-rev1 + - const: google,lazor-rev2 + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 (rev3 - 8) + items: + - const: google,lazor-rev3 + - const: google,lazor-rev4 + - const: google,lazor-rev5 + - const: google,lazor-rev6 + - const: google,lazor-rev7 + - const: google,lazor-rev8 + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 (newest rev) + items: + - const: google,lazor + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 with KB Backlight (rev1 - 2) + items: + - const: google,lazor-rev1-sku2 + - const: google,lazor-rev2-sku2 + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 with KB Backlight (rev3 - 8) + items: + - const: google,lazor-rev3-sku2 + - const: google,lazor-rev4-sku2 + - const: google,lazor-rev5-sku2 + - const: google,lazor-rev6-sku2 + - const: google,lazor-rev7-sku2 + - const: google,lazor-rev8-sku2 + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 with KB Backlight (newest rev) + items: + - const: google,lazor-sku2 + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 with LTE (rev1 - 2) + items: + - const: google,lazor-rev1-sku0 + - const: google,lazor-rev2-sku0 + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 with LTE (rev3 - 8) + items: + - const: google,lazor-rev3-sku0 + - const: google,lazor-rev4-sku0 + - const: google,lazor-rev5-sku0 + - const: google,lazor-rev6-sku0 + - const: google,lazor-rev7-sku0 + - const: google,lazor-rev8-sku0 + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 with LTE (newest rev) + items: + - const: google,lazor-sku0 + - const: qcom,sc7180 + + - description: Acer Chromebook 511 (rev4 - rev8) + items: + - const: google,lazor-rev4-sku4 + - const: google,lazor-rev5-sku4 + - const: google,lazor-rev6-sku4 + - const: google,lazor-rev7-sku4 + - const: google,lazor-rev8-sku4 + - const: qcom,sc7180 + + - description: Acer Chromebook 511 (newest rev) + items: + - const: google,lazor-sku4 + - const: qcom,sc7180 + + - description: Acer Chromebook 511 without Touchscreen (rev4) + items: + - const: google,lazor-rev4-sku5 + - const: qcom,sc7180 + + - description: Acer Chromebook 511 without Touchscreen (rev5 - rev8) + items: + - const: google,lazor-rev5-sku5 + - const: google,lazor-rev5-sku6 + - const: google,lazor-rev6-sku6 + - const: google,lazor-rev7-sku6 + - const: google,lazor-rev8-sku6 + - const: qcom,sc7180 + + - description: Acer Chromebook 511 without Touchscreen (newest rev) + items: + - const: google,lazor-sku6 + - const: qcom,sc7180 + + - description: Google Mrbland with AUO panel (rev0) + items: + - const: google,mrbland-rev0-sku0 + - const: qcom,sc7180 + + - description: Google Mrbland with AUO panel (newest rev) + items: + - const: google,mrbland-sku1536 + - const: qcom,sc7180 + + - description: Google Mrbland with BOE panel (rev0) + items: + - const: google,mrbland-rev0-sku16 + - const: qcom,sc7180 + + - description: Google Mrbland with BOE panel (newest rev) + items: + - const: google,mrbland-sku1024 + - const: google,mrbland-sku768 + - const: qcom,sc7180 + + - description: Google Pazquel with Parade (newest rev) + items: + - const: google,pazquel-sku5 + - const: qcom,sc7180 + + - description: Google Pazquel with TI (newest rev) + items: + - const: google,pazquel-sku1 + - const: qcom,sc7180 + + - description: Google Pazquel with LTE and Parade (newest rev) + items: + - const: google,pazquel-sku4 + - const: qcom,sc7180 + + - description: Google Pazquel with LTE and TI (newest rev) + items: + - const: google,pazquel-sku0 + - const: google,pazquel-sku2 + - const: qcom,sc7180 + + - description: Sharp Dynabook Chromebook C1 (rev1) + items: + - const: google,pompom-rev1 + - const: qcom,sc7180 + + - description: Sharp Dynabook Chromebook C1 (rev2) + items: + - const: google,pompom-rev2 + - const: qcom,sc7180 + + - description: Sharp Dynabook Chromebook C1 (newest rev) + items: + - const: google,pompom + - const: qcom,sc7180 + + - description: Sharp Dynabook Chromebook C1 with LTE (rev1) + items: + - const: google,pompom-rev1-sku0 + - const: qcom,sc7180 + + - description: Sharp Dynabook Chromebook C1 with LTE (rev2) + items: + - const: google,pompom-rev2-sku0 + - const: qcom,sc7180 + + - description: Sharp Dynabook Chromebook C1 with LTE (newest rev) + items: + - const: google,pompom-sku0 + - const: qcom,sc7180 + + - description: Google Quackingstick (newest rev) + items: + - const: google,quackingstick-sku1537 + - const: qcom,sc7180 + + - description: Google Quackingstick with LTE (newest rev) + items: + - const: google,quackingstick-sku1536 + - const: qcom,sc7180 + + - description: Google Trogdor (newest rev) + items: + - const: google,trogdor + - const: qcom,sc7180 + + - description: Google Trogdor with LTE (newest rev) + items: + - const: google,trogdor-sku0 + - const: qcom,sc7180 + + - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel (rev0) + items: + - const: google,wormdingler-rev0-sku16 + - const: qcom,sc7180 + + - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel (newest rev) + items: + - const: google,wormdingler-sku1024 + - const: qcom,sc7180 + + - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel and rt5682s (newest rev) + items: + - const: google,wormdingler-sku1025 + - const: qcom,sc7180 + + - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel (rev0) + items: + - const: google,wormdingler-rev0-sku0 + - const: qcom,sc7180 + + - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel (newest rev) + items: + - const: google,wormdingler-sku0 + - const: qcom,sc7180 + + - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel and rt5682s (newest rev) + items: + - const: google,wormdingler-sku1 + - const: qcom,sc7180 + + - description: Qualcomm Technologies, Inc. sc7280 CRD platform (rev3 - 4) + items: + - const: qcom,sc7280-crd + - const: google,hoglin-rev3 + - const: google,hoglin-rev4 + - const: google,piglin-rev3 + - const: google,piglin-rev4 + - const: qcom,sc7280 + + - description: Qualcomm Technologies, Inc. sc7280 CRD platform (newest rev) + items: + - const: google,hoglin + - const: qcom,sc7280 + + - description: Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform + items: + - const: qcom,sc7280-idp + - const: google,senor + - const: qcom,sc7280 + + - description: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform + items: + - const: qcom,sc7280-idp2 + - const: google,piglin + - const: qcom,sc7280 + + - description: Google Herobrine (newest rev) + items: + - const: google,herobrine + - const: qcom,sc7280 + + - description: Google Villager (newest rev) + items: + - const: google,villager - const: qcom,sc7280 - items: @@ -238,16 +584,36 @@ properties: - items: - enum: + - lenovo,thinkpad-x13s + - qcom,sc8280xp-crd - qcom,sc8280xp-qrd - const: qcom,sc8280xp - items: - enum: + - sony,discovery-row + - sony,kirin-row + - sony,pioneer-row + - sony,voyager-row + - const: qcom,sdm630 + + - items: + - enum: + - inforce,ifc6560 + - const: qcom,sda660 + + - items: + - enum: - fairphone,fp3 - const: qcom,sdm632 - items: - enum: + - sony,mermaid-row + - const: qcom,sdm636 + + - items: + - enum: - xiaomi,lavender - const: qcom,sdm660 @@ -271,6 +637,13 @@ properties: - items: - enum: + - qcom,qcs404-evb-1000 + - qcom,qcs404-evb-4000 + - const: qcom,qcs404-evb + - const: qcom,qcs404 + + - items: + - enum: - qcom,sa8155p-adp - const: qcom,sa8155p @@ -281,24 +654,62 @@ properties: - items: - enum: + - lenovo,yoga-c630 + - lg,judyln + - lg,judyp + - oneplus,enchilada + - oneplus,fajita + - qcom,sdm845-mtp + - shift,axolotl + - samsung,w737 + - sony,akari-row + - sony,akatsuki-row + - sony,apollo-row + - thundercomm,db845c + - xiaomi,beryllium + - xiaomi,polaris + - const: qcom,sdm845 + + - items: + - enum: + - sony,pdx201 + - const: qcom,sm6125 + + - items: + - enum: + - sony,pdx213 + - const: qcom,sm6350 + + - items: + - enum: - fairphone,fp4 - const: qcom,sm7225 - items: - enum: + - microsoft,surface-duo + - qcom,sm8150-hdk - qcom,sm8150-mtp + - sony,bahamut-generic + - sony,griffin-generic - const: qcom,sm8150 - items: - enum: - qcom,qrb5165-rb5 + - qcom,sm8250-hdk - qcom,sm8250-mtp + - sony,pdx203-generic + - sony,pdx206-generic - const: qcom,sm8250 - items: - enum: + - microsoft,surface-duo2 - qcom,sm8350-hdk - qcom,sm8350-mtp + - sony,pdx214-generic + - sony,pdx215-generic - const: qcom,sm8350 - items: diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index cf9eb1e8326a..7811ba64149c 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -554,6 +554,11 @@ properties: - const: vamrs,rk3399pro-vmarc-som - const: rockchip,rk3399pro + - description: Radxa ROCK Pi S + items: + - const: radxa,rockpis + - const: rockchip,rk3308 + - description: Radxa Rock2 Square items: - const: radxa,rock2-square diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml new file mode 100644 index 000000000000..653f85997643 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/samsung/samsung-soc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C, S5P and Exynos SoC compatibles naming convention + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + Guidelines for new compatibles for SoC blocks/components. + When adding new compatibles in new bindings, use the format:: + samsung,SoC-IP + + For example:: + samsung,exynos5433-cmu-isp + +select: + properties: + compatible: + pattern: "^samsung,.*(s3c|s5pv|exynos)[0-9a-z]+.*$" + required: + - compatible + +properties: + compatible: + oneOf: + - description: Preferred naming style for compatibles of SoC components + pattern: "^samsung,(s3c|s5pv|exynos|exynosautov)[0-9]+-.*$" + + # Legacy compatibles with wild-cards - list cannot grow with new bindings: + - enum: + - samsung,exynos4x12-pinctrl + - samsung,exynos4x12-usb2-phy + - samsung,s3c64xx-pinctrl + - samsung,s3c64xx-wakeup-eint + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 8b31565fee59..4c605bccc474 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -59,12 +59,18 @@ properties: - prt,prtt1s # Protonic PRTT1S - const: st,stm32mp151 - - description: DH STM32MP153 SoM based Boards + - description: DH STM32MP153 DHCOM SoM based Boards items: - const: dh,stm32mp153c-dhcom-drc02 - const: dh,stm32mp153c-dhcom-som - const: st,stm32mp153 + - description: DH STM32MP153 DHCOR SoM based Boards + items: + - const: dh,stm32mp153c-dhcor-drc-compact + - const: dh,stm32mp153c-dhcor-som + - const: st,stm32mp153 + - items: - enum: - shiratech,stm32mp157a-iot-box # IoT Box diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 95278a6a9a8e..0c2356778208 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -863,6 +863,11 @@ properties: - const: yones-toptech,bs1078-v2 - const: allwinner,sun6i-a31s + - description: X96 Mate TV box + items: + - const: hechuang,x96-mate + - const: allwinner,sun50i-h616 + - description: Xunlong OrangePi items: - const: xunlong,orangepi @@ -963,4 +968,9 @@ properties: - const: xunlong,orangepi-zero-plus2-h3 - const: allwinner,sun8i-h3 + - description: Xunlong OrangePi Zero 2 + items: + - const: xunlong,orangepi-zero2 + - const: allwinner,sun50i-h616 + additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml index 8eee312c2e6f..99566688d033 100644 --- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml @@ -29,10 +29,20 @@ properties: compatible: enum: - allwinner,sun5i-a13-mbus + - allwinner,sun8i-a33-mbus + - allwinner,sun8i-a50-mbus + - allwinner,sun8i-a83t-mbus - allwinner,sun8i-h3-mbus - allwinner,sun8i-r40-mbus + - allwinner,sun8i-v3s-mbus + - allwinner,sun8i-v536-mbus + - allwinner,sun20i-d1-mbus - allwinner,sun50i-a64-mbus + - allwinner,sun50i-a100-mbus - allwinner,sun50i-h5-mbus + - allwinner,sun50i-h6-mbus + - allwinner,sun50i-h616-mbus + - allwinner,sun50i-r329-mbus reg: minItems: 1 @@ -81,13 +91,13 @@ required: - dma-ranges if: - properties: - compatible: - contains: - enum: - - allwinner,sun8i-h3-mbus - - allwinner,sun50i-a64-mbus - - allwinner,sun50i-h5-mbus + not: + properties: + compatible: + contains: + enum: + - allwinner,sun5i-a13-mbus + - allwinner,sun8i-r40-mbus then: properties: diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml index 8c6543b5c0dc..711bb4d08c60 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml @@ -40,7 +40,6 @@ required: - compatible - reg - nvidia,bpmp - - status examples: - | diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml index e79eeac5f086..17caf78f0ccf 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml @@ -28,6 +28,9 @@ properties: - items: - const: allwinner,sun8i-r40-de2-clk - const: allwinner,sun8i-h3-de2-clk + - items: + - const: allwinner,sun20i-d1-de2-clk + - const: allwinner,sun50i-h5-de2-clk reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml new file mode 100644 index 000000000000..f2c48460a399 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,scu-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - Clock bindings based on SCU Message Protocol + +maintainers: + - Abel Vesa <abel.vesa@nxp.com> + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + This binding uses the common clock binding. + (Documentation/devicetree/bindings/clock/clock-bindings.txt) + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See the full list of clock IDs from + include/dt-bindings/clock/imx8qxp-clock.h + +properties: + compatible: + items: + - enum: + - fsl,imx8dxl-clk + - fsl,imx8qm-clk + - fsl,imx8qxp-clk + - const: fsl,scu-clk + + '#clock-cells': + const: 2 + +required: + - compatible + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller { + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; + #clock-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml index 31497677e8de..7a8d375e055e 100644 --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml @@ -4,18 +4,19 @@ $id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250 +title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250/SM8350 maintainers: - Jonathan Marek <jonathan@marek.ca> description: | Qualcomm display clock control module which supports the clocks, resets and - power domains on SM8150 and SM8250. + power domains on SM8150/SM8250/SM8350. See also: dt-bindings/clock/qcom,dispcc-sm8150.h dt-bindings/clock/qcom,dispcc-sm8250.h + dt-bindings/clock/qcom,dispcc-sm8350.h properties: compatible: @@ -23,6 +24,7 @@ properties: - qcom,sc8180x-dispcc - qcom,sm8150-dispcc - qcom,sm8250-dispcc + - qcom,sm8350-dispcc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml new file mode 100644 index 000000000000..0a0546c079a9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gpucc-sm8350.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Graphics Clock & Reset Controller Binding + +maintainers: + - Robert Foss <robert.foss@linaro.org> + +description: | + Qualcomm graphics clock control module which supports the clocks, resets and + power domains on Qualcomm SoCs. + + See also: + dt-bindings/clock/qcom,gpucc-sm8350.h + +properties: + compatible: + enum: + - qcom,sm8350-gpucc + + clocks: + items: + - description: Board XO source + - description: GPLL0 main branch source + - description: GPLL0 div branch source + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8350.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@3d90000 { + compatible = "qcom,sm8350-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml new file mode 100644 index 000000000000..268f4c6ae0ee --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm8450-camcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller Binding for SM8450 + +maintainers: + - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> + +description: | + Qualcomm camera clock control module which supports the clocks, resets and + power domains on SM8450. + + See also include/dt-bindings/clock/qcom,sm8450-camcc.h + +properties: + compatible: + const: qcom,sm8450-camcc + + clocks: + items: + - description: Camera AHB clock from GCC + - description: Board XO source + - description: Board active XO source + - description: Sleep clock source + + power-domains: + maxItems: 1 + description: + A phandle and PM domain specifier for the MMCX power domain. + + required-opps: + description: + A phandle to an OPP node describing required MMCX performance point. + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - power-domains + - required-opps + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8450.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + clock-controller@ade0000 { + compatible = "qcom,sm8450-camcc"; + reg = <0xade0000 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd SM8450_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml index 5073e569a47f..006d33a9e0f1 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml @@ -33,6 +33,7 @@ properties: enum: - samsung,exynos7885-cmu-top - samsung,exynos7885-cmu-core + - samsung,exynos7885-cmu-fsys - samsung,exynos7885-cmu-peri clocks: @@ -92,6 +93,32 @@ allOf: properties: compatible: contains: + const: samsung,exynos7885-cmu-fsys + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_FSYS bus clock (from CMU_TOP) + - description: MMC_CARD clock (from CMU_TOP) + - description: MMC_EMBD clock (from CMU_TOP) + - description: MMC_SDIO clock (from CMU_TOP) + - description: USB30DRD clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_fsys_bus + - const: dout_fsys_mmc_card + - const: dout_fsys_mmc_embd + - const: dout_fsys_mmc_sdio + - const: dout_fsys_usb30drd + + - if: + properties: + compatible: + contains: const: samsung,exynos7885-cmu-peri then: diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml index f8c474227807..242fe922b035 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml +++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml @@ -78,6 +78,7 @@ if: contains: enum: - st,stm32mp1-rcc-secure + - st,stm32mp13-rcc then: properties: clocks: diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml index a9a776da5505..10b3a7a4af36 100644 --- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml +++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml @@ -63,8 +63,8 @@ additionalProperties: true examples: - | / { - model = "Qualcomm Technologies, Inc. QCS404"; - compatible = "qcom,qcs404"; + model = "Qualcomm Technologies, Inc. QCS404 EVB 1000"; + compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb", "qcom,qcs404"; #address-cells = <2>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/firmware/fsl,scu.yaml b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml new file mode 100644 index 000000000000..b40b0ef56978 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml @@ -0,0 +1,210 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/fsl,scu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX System Controller Firmware (SCFW) + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: + The System Controller Firmware (SCFW) is a low-level system function + which runs on a dedicated Cortex-M core to provide power, clock, and + resource management. It exists on some i.MX8 processors. e.g. i.MX8QM + (QM, QP), and i.MX8QX (QXP, DX). + The AP communicates with the SC using a multi-ported MU module found + in the LSIO subsystem. The current definition of this MU module provides + 5 remote AP connections to the SC to support up to 5 execution environments + (TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces + with the LSIO DSC IP bus. The SC firmware will communicate with this MU + using the MSI bus. + +properties: + compatible: + const: fsl,imx-scu + + clock-controller: + description: + Clock controller node that provides the clocks controlled by the SCU + $ref: /schemas/clock/fsl,scu-clk.yaml + + ocotp: + description: + OCOTP controller node provided by the SCU + $ref: /schemas/nvmem/fsl,scu-ocotp.yaml + + keys: + description: + Keys provided by the SCU + $ref: /schemas/input/fsl,scu-key.yaml + + mboxes: + description: + A list of phandles of TX MU channels followed by a list of phandles of + RX MU channels. The list may include at the end one more optional MU + channel for general interrupt. The number of expected tx and rx + channels is 1 TX and 1 RX channels if MU instance is "fsl,imx8-mu-scu" + compatible, 4 TX and 4 RX channels otherwise. All MU channels must be + within the same MU instance. Cross instances are not allowed. The MU + instance can only be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users + need to ensure that one is used that does not conflict with other + execution environments such as ATF. + oneOf: + - items: + - description: TX0 MU channel + - description: RX0 MU channel + - items: + - description: TX0 MU channel + - description: RX0 MU channel + - description: optional MU channel for general interrupt + - items: + - description: TX0 MU channel + - description: TX1 MU channel + - description: TX2 MU channel + - description: TX3 MU channel + - description: RX0 MU channel + - description: RX1 MU channel + - description: RX2 MU channel + - description: RX3 MU channel + - items: + - description: TX0 MU channel + - description: TX1 MU channel + - description: TX2 MU channel + - description: TX3 MU channel + - description: RX0 MU channel + - description: RX1 MU channel + - description: RX2 MU channel + - description: RX3 MU channel + - description: optional MU channel for general interrupt + + mbox-names: + oneOf: + - items: + - const: tx0 + - const: rx0 + - items: + - const: tx0 + - const: rx0 + - const: gip3 + - items: + - const: tx0 + - const: tx1 + - const: tx2 + - const: tx3 + - const: rx0 + - const: rx1 + - const: rx2 + - const: rx3 + - items: + - const: tx0 + - const: tx1 + - const: tx2 + - const: tx3 + - const: rx0 + - const: rx1 + - const: rx2 + - const: rx3 + - const: gip3 + + pinctrl: + description: + Pin controller provided by the SCU + $ref: /schemas/pinctrl/fsl,scu-pinctrl.yaml + + power-controller: + description: + Power domains controller node that provides the power domains + controlled by the SCU + $ref: /schemas/power/fsl,scu-pd.yaml + + rtc: + description: + RTC controller provided by the SCU + $ref: /schemas/rtc/fsl,scu-rtc.yaml + + thermal-sensor: + description: + Thermal sensor provided by the SCU + $ref: /schemas/thermal/fsl,scu-thermal.yaml + + watchdog: + description: + Watchdog controller provided by the SCU + $ref: /schemas/watchdog/fsl,scu-wdt.yaml + +required: + - compatible + - mbox-names + - mboxes + +additionalProperties: false + +examples: + - | + #include <dt-bindings/firmware/imx/rsrc.h> + #include <dt-bindings/input/input.h> + #include <dt-bindings/pinctrl/pads-imx8qxp.h> + + firmware { + system-controller { + compatible = "fsl,imx-scu"; + mbox-names = "tx0", "tx1", "tx2", "tx3", + "rx0", "rx1", "rx2", "rx3", + "gip3"; + mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 &lsio_mu1 0 2 &lsio_mu1 0 3 + &lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 &lsio_mu1 1 3 + &lsio_mu1 3 3>; + + clock-controller { + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; + #clock-cells = <2>; + }; + + pinctrl { + compatible = "fsl,imx8qxp-iomuxc"; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 + IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020 + >; + }; + }; + + ocotp { + compatible = "fsl,imx8qxp-scu-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + + fec_mac0: mac@2c4 { + reg = <0x2c4 6>; + }; + }; + + power-controller { + compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; + #power-domain-cells = <1>; + }; + + rtc { + compatible = "fsl,imx8qxp-sc-rtc"; + }; + + keys { + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; + linux,keycodes = <KEY_POWER>; + }; + + watchdog { + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; + + thermal-sensor { + compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal"; + #thermal-sensor-cells = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml index 378da2649e66..29c27eadbac8 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml @@ -11,7 +11,11 @@ maintainers: properties: compatible: - const: xlnx,zynq-gpio-1.0 + enum: + - xlnx,zynq-gpio-1.0 + - xlnx,zynqmp-gpio-1.0 + - xlnx,versal-gpio-1.0 + - xlnx,pmc-gpio-1.0 reg: maxItems: 1 @@ -24,6 +28,11 @@ properties: gpio-controller: true + gpio-line-names: + description: strings describing the names of each gpio line + minItems: 58 + maxItems: 174 + interrupt-controller: true "#interrupt-cells": @@ -32,6 +41,54 @@ properties: clocks: maxItems: 1 + power-domains: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + enum: + - xlnx,zynqmp-gpio-1.0 + then: + properties: + gpio-line-names: + minItems: 174 + maxItems: 174 + + - if: + properties: + compatible: + enum: + - xlnx,zynq-gpio-1.0 + then: + properties: + gpio-line-names: + minItems: 118 + maxItems: 118 + + - if: + properties: + compatible: + enum: + - xlnx,versal-gpio-1.0 + then: + properties: + gpio-line-names: + minItems: 58 + maxItems: 58 + + - if: + properties: + compatible: + enum: + - xlnx,pmc-gpio-1.0 + then: + properties: + gpio-line-names: + minItems: 116 + maxItems: 116 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml b/Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml index 1f80767da38b..792f371cec03 100644 --- a/Documentation/devicetree/bindings/arm/renesas,prr.yaml +++ b/Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml @@ -1,7 +1,7 @@ -# SPDX-License-Identifier: GPL-2.0 +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/renesas,prr.yaml# +$id: http://devicetree.org/schemas/hwinfo/renesas,prr.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas Product Register diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml index f771c09aabfc..0ec033e48830 100644 --- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml @@ -21,10 +21,18 @@ properties: - enum: - allwinner,sun8i-a23-i2c - allwinner,sun8i-a83t-i2c + - allwinner,sun8i-v536-i2c - allwinner,sun50i-a64-i2c - - allwinner,sun50i-a100-i2c - allwinner,sun50i-h6-i2c + - const: allwinner,sun6i-a31-i2c + - description: Allwinner SoCs with offload support + items: + - enum: + - allwinner,sun20i-d1-i2c + - allwinner,sun50i-a100-i2c - allwinner,sun50i-h616-i2c + - allwinner,sun50i-r329-i2c + - const: allwinner,sun8i-v536-i2c - const: allwinner,sun6i-a31-i2c - const: marvell,mv64xxx-i2c - const: marvell,mv78230-i2c diff --git a/Documentation/devicetree/bindings/input/fsl,scu-key.yaml b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml new file mode 100644 index 000000000000..e6266d188266 --- /dev/null +++ b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/fsl,scu-key.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - SCU key bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + +allOf: + - $ref: input.yaml# + +properties: + compatible: + items: + - const: fsl,imx8qxp-sc-key + - const: fsl,imx-sc-key + + linux,keycodes: + maxItems: 1 + +required: + - compatible + - linux,keycodes + +additionalProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + + keys { + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; + linux,keycodes = <KEY_POWER>; + }; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 6a4831fd3616..55fc620c72cd 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -22,6 +22,7 @@ properties: - enum: - allwinner,sun20i-d1-emac - allwinner,sun50i-h6-emac + - allwinner,sun50i-h616-emac0 - const: allwinner,sun50i-a64-emac reg: diff --git a/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml new file mode 100644 index 000000000000..2d33bbab7163 --- /dev/null +++ b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pcs/renesas,rzn1-miic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 MII converter + +maintainers: + - Clément Léger <clement.leger@bootlin.com> + +description: | + This MII converter is present on the Renesas RZ/N1 SoC family. It is + responsible to do MII passthrough or convert it to RMII/RGMII. + +properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + compatible: + items: + - enum: + - renesas,r9a06g032-miic + - const: renesas,rzn1-miic + + reg: + maxItems: 1 + + clocks: + items: + - description: MII reference clock + - description: RGMII reference clock + - description: RMII reference clock + - description: AHB clock used for the MII converter register interface + + clock-names: + items: + - const: mii_ref + - const: rgmii_ref + - const: rmii_ref + - const: hclk + + renesas,miic-switch-portin: + description: MII Switch PORTIN configuration. This value should use one of + the values defined in dt-bindings/net/pcs-rzn1-miic.h. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + + power-domains: + maxItems: 1 + +patternProperties: + "^mii-conv@[0-5]$": + type: object + description: MII converter port + + properties: + reg: + description: MII Converter port number. + enum: [1, 2, 3, 4, 5] + + renesas,miic-input: + description: Converter input port configuration. This value should use + one of the values defined in dt-bindings/net/pcs-rzn1-miic.h. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - reg + - renesas,miic-input + + additionalProperties: false + + allOf: + - if: + properties: + reg: + const: 1 + then: + properties: + renesas,miic-input: + const: 0 + - if: + properties: + reg: + const: 2 + then: + properties: + renesas,miic-input: + enum: [1, 11] + - if: + properties: + reg: + const: 3 + then: + properties: + renesas,miic-input: + enum: [7, 10] + - if: + properties: + reg: + const: 4 + then: + properties: + renesas,miic-input: + enum: [4, 6, 9, 13] + - if: + properties: + reg: + const: 5 + then: + properties: + renesas,miic-input: + enum: [3, 5, 8, 12] + +required: + - '#address-cells' + - '#size-cells' + - compatible + - reg + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/net/pcs-rzn1-miic.h> + #include <dt-bindings/clock/r9a06g032-sysctrl.h> + + eth-miic@44030000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic"; + reg = <0x44030000 0x10000>; + clocks = <&sysctrl R9A06G032_CLK_MII_REF>, + <&sysctrl R9A06G032_CLK_RGMII_REF>, + <&sysctrl R9A06G032_CLK_RMII_REF>, + <&sysctrl R9A06G032_HCLK_SWITCH_RG>; + clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk"; + renesas,miic-switch-portin = <MIIC_GMAC2_PORT>; + power-domains = <&sysctrl>; + + mii_conv1: mii-conv@1 { + renesas,miic-input = <MIIC_GMAC1_PORT>; + reg = <1>; + }; + + mii_conv2: mii-conv@2 { + renesas,miic-input = <MIIC_SWITCH_PORTD>; + reg = <2>; + }; + + mii_conv3: mii-conv@3 { + renesas,miic-input = <MIIC_SWITCH_PORTC>; + reg = <3>; + }; + + mii_conv4: mii-conv@4 { + renesas,miic-input = <MIIC_SWITCH_PORTB>; + reg = <4>; + }; + + mii_conv5: mii-conv@5 { + renesas,miic-input = <MIIC_SWITCH_PORTA>; + reg = <5>; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml new file mode 100644 index 000000000000..682688299b26 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/fsl,scu-ocotp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - OCOTP bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + enum: + - fsl,imx8qm-scu-ocotp + - fsl,imx8qxp-scu-ocotp + +patternProperties: + '^mac@[0-9a-f]*$': + type: object + description: + MAC address. + + properties: + reg: + description: + Byte offset within OCOTP where the MAC address is stored + maxItems: 1 + + required: + - reg + + additionalProperties: false + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + ocotp { + compatible = "fsl,imx8qxp-scu-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + + fec_mac0: mac@2c4 { + reg = <0x2c4 6>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index bfce850c2035..0681b9a3965f 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -127,20 +127,17 @@ patternProperties: additionalProperties: false - "^vcc-p[a-hlm]-supply$": + "^vcc-p[a-ilm]-supply$": description: Power supplies for pin banks. required: - "#gpio-cells" - - "#interrupt-cells" - compatible - reg - - interrupts - clocks - clock-names - gpio-controller - - interrupt-controller allOf: # FIXME: We should have the pin bank supplies here, but not a lot of @@ -149,6 +146,19 @@ allOf: - $ref: "pinctrl.yaml#" - if: + not: + properties: + compatible: + enum: + - allwinner,sun50i-h616-r-pinctrl + + then: + required: + - "#interrupt-cells" + - interrupts + - interrupt-controller + + - if: properties: compatible: enum: diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml new file mode 100644 index 000000000000..45ea565ce238 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - Pinctrl bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + This binding uses the i.MX common pinctrl binding. + (Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt) + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + enum: + - fsl,imx8qm-iomuxc + - fsl,imx8qxp-iomuxc + - fsl,imx8dxl-iomuxc + +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 3 integers and represents the pin ID, the mux value + and pad setting for the pin. The first 2 integers - pin_id and mux_val - are + specified using a PIN_FUNC_ID macro, which can be found in + <include/dt-bindings/pinctrl/pads-imx8qxp.h>. The last integer is + the pad setting value like pull-up on this pin. Please refer to the + appropriate i.MX8 Reference Manual for detailed pad CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "pin_id" indicates the pin ID + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "fsl,imx8qxp-iomuxc"; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + 111 0 0x06000020 + 112 0 0x06000020 + >; + }; + }; diff --git a/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml new file mode 100644 index 000000000000..1f72b18ca0fc --- /dev/null +++ b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/fsl,scu-pd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - Power domain bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + Power domain bindings based on SCU Message Protocol + +allOf: + - $ref: power-domain.yaml# + +properties: + compatible: + items: + - enum: + - fsl,imx8qm-scu-pd + - fsl,imx8qxp-scu-pd + - const: fsl,scu-pd + + '#power-domain-cells': + const: 1 + +required: + - compatible + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + power-controller { + compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/rtc/fsl,scu-rtc.yaml b/Documentation/devicetree/bindings/rtc/fsl,scu-rtc.yaml new file mode 100644 index 000000000000..8c102b70d735 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/fsl,scu-rtc.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/fsl,scu-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - RTC bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + const: fsl,imx8qxp-sc-rtc + +required: + - compatible + +additionalProperties: false + +examples: + - | + rtc { + compatible = "fsl,imx8qxp-sc-rtc"; + }; diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt deleted file mode 100644 index 72ff033565e5..000000000000 --- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt +++ /dev/null @@ -1,46 +0,0 @@ -BCM2835 PM (Power domains, watchdog) - -The PM block controls power domains and some reset lines, and includes -a watchdog timer. This binding supersedes the brcm,bcm2835-pm-wdt -binding which covered some of PM's register range and functionality. - -Required properties: - -- compatible: Should be "brcm,bcm2835-pm" -- reg: Specifies base physical address and size of the two - register ranges ("PM" and "ASYNC_BRIDGE" in that - order) -- clocks: a) v3d: The V3D clock from CPRMAN - b) peri_image: The PERI_IMAGE clock from CPRMAN - c) h264: The H264 clock from CPRMAN - d) isp: The ISP clock from CPRMAN -- #reset-cells: Should be 1. This property follows the reset controller - bindings[1]. -- #power-domain-cells: Should be 1. This property follows the power domain - bindings[2]. - -Optional properties: - -- timeout-sec: Contains the watchdog timeout in seconds -- system-power-controller: Whether the watchdog is controlling the - system power. This node follows the power controller bindings[3]. - -[1] Documentation/devicetree/bindings/reset/reset.txt -[2] Documentation/devicetree/bindings/power/power-domain.yaml -[3] Documentation/devicetree/bindings/power/power-controller.txt - -Example: - -pm { - compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; - #power-domain-cells = <1>; - #reset-cells = <1>; - reg = <0x7e100000 0x114>, - <0x7e00a000 0x24>; - clocks = <&clocks BCM2835_CLOCK_V3D>, - <&clocks BCM2835_CLOCK_PERI_IMAGE>, - <&clocks BCM2835_CLOCK_H264>, - <&clocks BCM2835_CLOCK_ISP>; - clock-names = "v3d", "peri_image", "h264", "isp"; - system-power-controller; -}; diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml new file mode 100644 index 000000000000..e28ef198a801 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-pm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM2835 PM (Power domains, watchdog) + +description: | + The PM block controls power domains and some reset lines, and includes a + watchdog timer. + +maintainers: + - Nicolas Saenz Julienne <nsaenz@kernel.org> + +allOf: + - $ref: /schemas/watchdog/watchdog.yaml# + +properties: + compatible: + items: + - enum: + - brcm,bcm2835-pm + - brcm,bcm2711-pm + - const: brcm,bcm2835-pm-wdt + + reg: + minItems: 2 + maxItems: 3 + + reg-names: + minItems: 2 + items: + - const: pm + - const: asb + - const: rpivid_asb + + "#power-domain-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: v3d + - const: peri_image + - const: h264 + - const: isp + + system-power-controller: + type: boolean + + timeout-sec: true + +required: + - compatible + - reg + - "#power-domain-cells" + - "#reset-cells" + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>; + reg-names = "pm", "asb"; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; + }; diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml index 597d67fba92f..33748a061898 100644 --- a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml +++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Atmel Timer Counter Block @@ -75,7 +75,7 @@ patternProperties: "^pwm@[0-2]$": description: The timer block channels that are used as PWMs. - $ref: ../../pwm/pwm.yaml# + $ref: /schemas/pwm/pwm.yaml# type: object properties: compatible: diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml index b0dae51e1d42..04ffee3a7c59 100644 --- a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml +++ b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/microchip/microchip,mpfs-sys-controller.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/microchip/microchip,mpfs-sys-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml index c30a6437030d..13bb8dfcefe6 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml @@ -49,9 +49,6 @@ properties: reg: maxItems: 1 - assigned-clock-parents: true - assigned-clocks: true - '#clock-cells': const: 1 @@ -77,14 +74,20 @@ properties: Must be identical to the that of the parent interrupt controller. const: 3 + reboot-mode: + $ref: /schemas/power/reset/syscon-reboot-mode.yaml + type: object + description: + Reboot mode to alter bootloader behavior for the next boot + syscon-poweroff: - $ref: "../../power/reset/syscon-poweroff.yaml#" + $ref: /schemas/power/reset/syscon-poweroff.yaml# type: object description: Node for power off method syscon-reboot: - $ref: "../../power/reset/syscon-reboot.yaml#" + $ref: /schemas/power/reset/syscon-reboot.yaml# type: object description: Node for reboot method diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml index fde886a8cf43..60b49562ff69 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -22,8 +22,12 @@ properties: pattern: "^usi@[0-9a-f]+$" compatible: - enum: - - samsung,exynos850-usi # for USIv2 (Exynos850, ExynosAutoV9) + oneOf: + - items: + - const: samsung,exynosautov9-usi + - const: samsung,exynos850-usi + - enum: + - samsung,exynos850-usi reg: true diff --git a/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml new file mode 100644 index 000000000000..f9e4b3c8d0ee --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/fsl,scu-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - Thermal bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + +allOf: + - $ref: thermal-sensor.yaml# + +properties: + compatible: + items: + - const: fsl,imx8qxp-sc-thermal + - const: fsl,imx-sc-thermal + + '#thermal-sensor-cells': + const: 1 + +required: + - compatible + - '#thermal-sensor-cells' + +additionalProperties: false + +examples: + - | + thermal-sensor { + compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal"; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml new file mode 100644 index 000000000000..db8b5595540f --- /dev/null +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/timer/nvidia,tegra186-timer.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: NVIDIA Tegra186 timer + +maintainers: + - Thierry Reding <treding@nvidia.com> + +description: > + The Tegra timer provides 29-bit timer counters and a 32-bit timestamp + counter. Each NV timer selects its timing reference signal from the 1 MHz + reference generated by USEC, TSC or either clk_m or OSC. Each TMR can be + programmed to generate one-shot, periodic, or watchdog interrupts. + + +properties: + compatible: + oneOf: + - const: nvidia,tegra186-timer + description: > + The Tegra186 timer provides ten 29-bit timer counters. + - const: nvidia,tegra234-timer + description: > + The Tegra234 timer provides sixteen 29-bit timer counters. + + reg: + maxItems: 1 + + interrupts: true + +allOf: + - if: + properties: + compatible: + contains: + const: nvidia,tegra186-timer + then: + properties: + interrupts: + maxItems: 10 + description: > + One per each timer channels 0 through 9. + + - if: + properties: + compatible: + contains: + const: nvidia,tegra234-timer + then: + properties: + interrupts: + maxItems: 16 + description: > + One per each timer channels 0 through 15. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + timer@3010000 { + compatible = "nvidia,tegra186-timer"; + reg = <0x03010000 0x000e0000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + timer@2080000 { + compatible = "nvidia,tegra234-timer"; + reg = <0x02080000 0x00121000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml index 933fa356d2ce..e5dbf4169bc9 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml @@ -20,6 +20,7 @@ properties: - items: - enum: - allwinner,sun8i-a83t-musb + - allwinner,sun20i-d1-musb - allwinner,sun50i-h6-musb - const: allwinner,sun8i-a33-musb - items: diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index f512f0290728..12183ef47ee4 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -87,6 +87,9 @@ Required properties: "atmel,at91sam9g45-udc" "atmel,sama5d3-udc" "microchip,sam9x60-udc" + "microchip,lan9662-udc" + For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc" + is required. - reg: Address and length of the register set for the device - interrupts: Should contain usba interrupt - clocks: Should reference the peripheral and host clocks diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 1e84e1b7ab27..25a6c14618e1 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -38,6 +38,7 @@ properties: - allwinner,sun8i-h3-ehci - allwinner,sun8i-r40-ehci - allwinner,sun9i-a80-ehci + - allwinner,sun20i-d1-ehci - aspeed,ast2400-ehci - aspeed,ast2500-ehci - aspeed,ast2600-ehci diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index bb6bbd5f129d..180361b79f52 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -28,6 +28,7 @@ properties: - allwinner,sun8i-h3-ohci - allwinner,sun8i-r40-ohci - allwinner,sun9i-a80-ohci + - allwinner,sun20i-d1-ohci - brcm,bcm3384-ohci - brcm,bcm63268-ohci - brcm,bcm6328-ohci diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 0496773a3c4d..ff0ac853cb82 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -510,6 +510,8 @@ patternProperties: description: Haoyu Microelectronic Co. Ltd. "^hardkernel,.*": description: Hardkernel Co., Ltd + "^hechuang,.*": + description: Shenzhen Hechuang Intelligent Co. "^hideep,.*": description: HiDeep Inc. "^himax,.*": @@ -1101,6 +1103,8 @@ patternProperties: description: SGX Sensortech "^sharp,.*": description: Sharp Corporation + "^shift,.*": + description: SHIFT GmbH "^shimafuji,.*": description: Shimafuji Electric, Inc. "^shiratech,.*": diff --git a/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml new file mode 100644 index 000000000000..f84c45d687d7 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/fsl,scu-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - Watchdog bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + items: + - const: fsl,imx8qxp-sc-wdt + - const: fsl,imx-sc-wdt + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + watchdog { + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; |