Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pul removal of obsolete architecture ports from Arnd Bergmann:
 "This removes the entire architecture code for blackfin, cris, frv,
  m32r, metag, mn10300, score, and tile, including the associated device
  drivers.

  I have been working with the (former) maintainers for each one to
  ensure that my interpretation was right and the code is definitely
  unused in mainline kernels. Many had fond memories of working on the
  respective ports to start with and getting them included in upstream,
  but also saw no point in keeping the port alive without any users.

  In the end, it seems that while the eight architectures are extremely
  different, they all suffered the same fate: There was one company in
  charge of an SoC line, a CPU microarchitecture and a software
  ecosystem, which was more costly than licensing newer off-the-shelf
  CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
  seems that all the SoC product lines are still around, but have not
  used the custom CPU architectures for several years at this point. In
  contrast, CPU instruction sets that remain popular and have actively
  maintained kernel ports tend to all be used across multiple licensees.

  [ See the new nds32 port merged in the previous commit for the next
    generation of "one company in charge of an SoC line, a CPU
    microarchitecture and a software ecosystem"   - Linus ]

  The removal came out of a discussion that is now documented at
  https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
  marking any ports as deprecated but remove them all at once after I
  made sure that they are all unused. Some architectures (notably tile,
  mn10300, and blackfin) are still being shipped in products with old
  kernels, but those products will never be updated to newer kernel
  releases.

  After this series, we still have a few architectures without mainline
  gcc support:

   - unicore32 and hexagon both have very outdated gcc releases, but the
     maintainers promised to work on providing something newer. At least
     in case of hexagon, this will only be llvm, not gcc.

   - openrisc, risc-v and nds32 are still in the process of finishing
     their support or getting it added to mainline gcc in the first
     place. They all have patched gcc-7.3 ports that work to some
     degree, but complete upstream support won't happen before gcc-8.1.
     Csky posted their first kernel patch set last week, their situation
     will be similar

  [ Palmer Dabbelt points out that RISC-V support is in mainline gcc
    since gcc-7, although gcc-7.3.0 is the recommended minimum  - Linus ]"

This really says it all:

 2498 files changed, 95 insertions(+), 467668 deletions(-)

* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
  MAINTAINERS: UNICORE32: Change email account
  staging: iio: remove iio-trig-bfin-timer driver
  tty: hvc: remove tile driver
  tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
  serial: remove tile uart driver
  serial: remove m32r_sio driver
  serial: remove blackfin drivers
  serial: remove cris/etrax uart drivers
  usb: Remove Blackfin references in USB support
  usb: isp1362: remove blackfin arch glue
  usb: musb: remove blackfin port
  usb: host: remove tilegx platform glue
  pwm: remove pwm-bfin driver
  i2c: remove bfin-twi driver
  spi: remove blackfin related host drivers
  watchdog: remove bfin_wdt driver
  can: remove bfin_can driver
  mmc: remove bfin_sdh driver
  input: misc: remove blackfin rotary driver
  input: keyboard: remove bf54x driver
  ...

23 files changed, 15 insertions, 1567 deletions

diff --git a/drivers/usb/gadget/function/f_uac1_legacy.c b/drivers/usb/gadget/function/f_uac1_legacy.c
index 04f4b2862256..24c086bcdeaa 100644
--- a/drivers/usb/gadget/function/f_uac1_legacy.c
+++ b/drivers/usb/gadget/function/f_uac1_legacy.c
@@ -4,8 +4,6 @@
   *
  * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
  * Copyright (C) 2008 Analog Devices, Inc
- *
- * Enter bugs at http://blackfin.uclinux.org/
  */
 
 #include <linux/slab.h>
diff --git a/drivers/usb/gadget/function/u_uac1_legacy.c b/drivers/usb/gadget/function/u_uac1_legacy.c
index cbc868d117af..5393e5c37a4b 100644
--- a/drivers/usb/gadget/function/u_uac1_legacy.c
+++ b/drivers/usb/gadget/function/u_uac1_legacy.c
@@ -4,8 +4,6 @@
  *
  * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
  * Copyright (C) 2008 Analog Devices, Inc
- *
- * Enter bugs at http://blackfin.uclinux.org/
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/function/u_uac1_legacy.h b/drivers/usb/gadget/function/u_uac1_legacy.h
index dd69e408a3d9..5c1bdf46fe32 100644
--- a/drivers/usb/gadget/function/u_uac1_legacy.h
+++ b/drivers/usb/gadget/function/u_uac1_legacy.h
@@ -4,8 +4,6 @@
  *
  * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
  * Copyright (C) 2008 Analog Devices, Inc
- *
- * Enter bugs at http://blackfin.uclinux.org/
  */
 
 #ifndef __U_UAC1_LEGACY_H
diff --git a/drivers/usb/gadget/legacy/audio.c b/drivers/usb/gadget/legacy/audio.c
index 7b11dce98b94..dd81fd538cb8 100644
--- a/drivers/usb/gadget/legacy/audio.c
+++ b/drivers/usb/gadget/legacy/audio.c
@@ -4,8 +4,6 @@
  *
  * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
  * Copyright (C) 2008 Analog Devices, Inc
- *
- * Enter bugs at http://blackfin.uclinux.org/
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 4fcfb3084b36..b85822f0c874 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -360,6 +360,7 @@ config USB_ISP116X_HCD
 config USB_ISP1362_HCD
 	tristate "ISP1362 HCD support"
 	depends on HAS_IOMEM
+	depends on COMPILE_TEST # nothing uses this
 	---help---
 	  Supports the Philips ISP1362 chip as a host controller
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 7f0737449df7..d927adf3afcd 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1275,11 +1275,6 @@ MODULE_LICENSE ("GPL");
 #define XILINX_OF_PLATFORM_DRIVER	ehci_hcd_xilinx_of_driver
 #endif
 
-#ifdef CONFIG_TILE_USB
-#include "ehci-tilegx.c"
-#define	PLATFORM_DRIVER		ehci_hcd_tilegx_driver
-#endif
-
 #ifdef CONFIG_USB_EHCI_HCD_PMC_MSP
 #include "ehci-pmcmsp.c"
 #define	PLATFORM_DRIVER		ehci_hcd_msp_driver
diff --git a/drivers/usb/host/ehci-tilegx.c b/drivers/usb/host/ehci-tilegx.c
deleted file mode 100644
index 610ed437ed2c..000000000000
--- a/drivers/usb/host/ehci-tilegx.c
+++ /dev/null
@@ -1,207 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2012 Tilera Corporation. All Rights Reserved.
- */
-
-/*
- * Tilera TILE-Gx USB EHCI host controller driver.
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/usb/tilegx.h>
-#include <linux/usb.h>
-
-#include <asm/homecache.h>
-
-#include <gxio/iorpc_usb_host.h>
-#include <gxio/usb_host.h>
-
-static void tilegx_start_ehc(void)
-{
-}
-
-static void tilegx_stop_ehc(void)
-{
-}
-
-static int tilegx_ehci_setup(struct usb_hcd *hcd)
-{
-	int ret = ehci_init(hcd);
-
-	/*
-	 * Some drivers do:
-	 *
-	 *   struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-	 *   ehci->need_io_watchdog = 0;
-	 *
-	 * here, but since this is a new driver we're going to leave the
-	 * watchdog enabled.  Later we may try to turn it off and see
-	 * whether we run into any problems.
-	 */
-
-	return ret;
-}
-
-static const struct hc_driver ehci_tilegx_hc_driver = {
-	.description		= hcd_name,
-	.product_desc		= "Tile-Gx EHCI",
-	.hcd_priv_size		= sizeof(struct ehci_hcd),
-
-	/*
-	 * Generic hardware linkage.
-	 */
-	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
-
-	/*
-	 * Basic lifecycle operations.
-	 */
-	.reset			= tilegx_ehci_setup,
-	.start			= ehci_run,
-	.stop			= ehci_stop,
-	.shutdown		= ehci_shutdown,
-
-	/*
-	 * Managing I/O requests and associated device resources.
-	 */
-	.urb_enqueue		= ehci_urb_enqueue,
-	.urb_dequeue		= ehci_urb_dequeue,
-	.endpoint_disable	= ehci_endpoint_disable,
-	.endpoint_reset		= ehci_endpoint_reset,
-
-	/*
-	 * Scheduling support.
-	 */
-	.get_frame_number	= ehci_get_frame,
-
-	/*
-	 * Root hub support.
-	 */
-	.hub_status_data	= ehci_hub_status_data,
-	.hub_control		= ehci_hub_control,
-	.bus_suspend		= ehci_bus_suspend,
-	.bus_resume		= ehci_bus_resume,
-	.relinquish_port	= ehci_relinquish_port,
-	.port_handed_over	= ehci_port_handed_over,
-
-	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
-};
-
-static int ehci_hcd_tilegx_drv_probe(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd;
-	struct ehci_hcd *ehci;
-	struct tilegx_usb_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	pte_t pte = { 0 };
-	int my_cpu = smp_processor_id();
-	int ret;
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	/*
-	 * Try to initialize our GXIO context; if we can't, the device
-	 * doesn't exist.
-	 */
-	if (gxio_usb_host_init(&pdata->usb_ctx, pdata->dev_index, 1) != 0)
-		return -ENXIO;
-
-	hcd = usb_create_hcd(&ehci_tilegx_hc_driver, &pdev->dev,
-			     dev_name(&pdev->dev));
-	if (!hcd) {
-          ret = -ENOMEM;
-          goto err_hcd;
-        }
-
-	/*
-	 * We don't use rsrc_start to map in our registers, but seems like
-	 * we ought to set it to something, so we use the register VA.
-	 */
-	hcd->rsrc_start =
-		(ulong) gxio_usb_host_get_reg_start(&pdata->usb_ctx);
-	hcd->rsrc_len = gxio_usb_host_get_reg_len(&pdata->usb_ctx);
-	hcd->regs = gxio_usb_host_get_reg_start(&pdata->usb_ctx);
-
-	tilegx_start_ehc();
-
-	ehci = hcd_to_ehci(hcd);
-	ehci->caps = hcd->regs;
-	ehci->regs =
-		hcd->regs + HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase));
-	/* cache this readonly data; minimize chip reads */
-	ehci->hcs_params = readl(&ehci->caps->hcs_params);
-
-	/* Create our IRQs and register them. */
-	pdata->irq = irq_alloc_hwirq(-1);
-	if (!pdata->irq) {
-		ret = -ENXIO;
-		goto err_no_irq;
-	}
-
-	tile_irq_activate(pdata->irq, TILE_IRQ_PERCPU);
-
-	/* Configure interrupts. */
-	ret = gxio_usb_host_cfg_interrupt(&pdata->usb_ctx,
-					  cpu_x(my_cpu), cpu_y(my_cpu),
-					  KERNEL_PL, pdata->irq);
-	if (ret) {
-		ret = -ENXIO;
-		goto err_have_irq;
-	}
-
-	/* Register all of our memory. */
-	pte = pte_set_home(pte, PAGE_HOME_HASH);
-	ret = gxio_usb_host_register_client_memory(&pdata->usb_ctx, pte, 0);
-	if (ret) {
-		ret = -ENXIO;
-		goto err_have_irq;
-	}
-
-	ret = usb_add_hcd(hcd, pdata->irq, IRQF_SHARED);
-	if (ret == 0) {
-		platform_set_drvdata(pdev, hcd);
-		device_wakeup_enable(hcd->self.controller);
-		return ret;
-	}
-
-err_have_irq:
-	irq_free_hwirq(pdata->irq);
-err_no_irq:
-	tilegx_stop_ehc();
-	usb_put_hcd(hcd);
-err_hcd:
-	gxio_usb_host_destroy(&pdata->usb_ctx);
-	return ret;
-}
-
-static int ehci_hcd_tilegx_drv_remove(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-	struct tilegx_usb_platform_data *pdata = dev_get_platdata(&pdev->dev);
-
-	usb_remove_hcd(hcd);
-	usb_put_hcd(hcd);
-	tilegx_stop_ehc();
-	gxio_usb_host_destroy(&pdata->usb_ctx);
-	irq_free_hwirq(pdata->irq);
-
-	return 0;
-}
-
-static void ehci_hcd_tilegx_drv_shutdown(struct platform_device *pdev)
-{
-	usb_hcd_platform_shutdown(pdev);
-	ehci_hcd_tilegx_drv_remove(pdev);
-}
-
-static struct platform_driver ehci_hcd_tilegx_driver = {
-	.probe		= ehci_hcd_tilegx_drv_probe,
-	.remove		= ehci_hcd_tilegx_drv_remove,
-	.shutdown	= ehci_hcd_tilegx_drv_shutdown,
-	.driver = {
-		.name	= "tilegx-ehci",
-	}
-};
-
-MODULE_ALIAS("platform:tilegx-ehci");
diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h
index da79e36ced89..650240846ee2 100644
--- a/drivers/usb/host/isp1362.h
+++ b/drivers/usb/host/isp1362.h
@@ -6,49 +6,6 @@
  */
 
 /* ------------------------------------------------------------------------- */
-/*
- * Platform specific compile time options
- */
-#if defined(CONFIG_BLACKFIN)
-
-#include <linux/io.h>
-#define USE_32BIT		0
-#define MAX_ROOT_PORTS		2
-#define USE_PLATFORM_DELAY	0
-#define USE_NDELAY		1
-
-#define DUMMY_DELAY_ACCESS \
-	do { \
-		bfin_read16(ASYNC_BANK0_BASE); \
-		bfin_read16(ASYNC_BANK0_BASE); \
-		bfin_read16(ASYNC_BANK0_BASE); \
-	} while (0)
-
-#undef insw
-#undef outsw
-
-#define insw  delayed_insw
-#define outsw  delayed_outsw
-
-static inline void delayed_outsw(unsigned int addr, void *buf, int len)
-{
-	unsigned short *bp = (unsigned short *)buf;
-	while (len--) {
-		DUMMY_DELAY_ACCESS;
-		outw(*bp++, addr);
-	}
-}
-
-static inline void delayed_insw(unsigned int addr, void *buf, int len)
-{
-	unsigned short *bp = (unsigned short *)buf;
-	while (len--) {
-		DUMMY_DELAY_ACCESS;
-		*bp++ = inw(addr);
-	}
-}
-
-#else
 
 #define MAX_ROOT_PORTS		2
 
@@ -60,9 +17,6 @@ static inline void delayed_insw(unsigned int addr, void *buf, int len)
 
 #define DUMMY_DELAY_ACCESS do {} while (0)
 
-#endif
-
-
 /* ------------------------------------------------------------------------- */
 
 #define USB_RESET_WIDTH			50
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index d088c340e4d0..4806e0f9e8d4 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1245,11 +1245,6 @@ MODULE_LICENSE ("GPL");
 #define TMIO_OHCI_DRIVER	ohci_hcd_tmio_driver
 #endif
 
-#ifdef CONFIG_TILE_USB
-#include "ohci-tilegx.c"
-#define PLATFORM_DRIVER		ohci_hcd_tilegx_driver
-#endif
-
 static int __init ohci_hcd_mod_init(void)
 {
 	int retval = 0;
@@ -1274,12 +1269,6 @@ static int __init ohci_hcd_mod_init(void)
 		goto error_ps3;
 #endif
 
-#ifdef PLATFORM_DRIVER
-	retval = platform_driver_register(&PLATFORM_DRIVER);
-	if (retval < 0)
-		goto error_platform;
-#endif
-
 #ifdef OF_PLATFORM_DRIVER
 	retval = platform_driver_register(&OF_PLATFORM_DRIVER);
 	if (retval < 0)
@@ -1323,10 +1312,6 @@ static int __init ohci_hcd_mod_init(void)
 	platform_driver_unregister(&OF_PLATFORM_DRIVER);
  error_of_platform:
 #endif
-#ifdef PLATFORM_DRIVER
-	platform_driver_unregister(&PLATFORM_DRIVER);
- error_platform:
-#endif
 #ifdef PS3_SYSTEM_BUS_DRIVER
 	ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
  error_ps3:
@@ -1354,9 +1339,6 @@ static void __exit ohci_hcd_mod_exit(void)
 #ifdef OF_PLATFORM_DRIVER
 	platform_driver_unregister(&OF_PLATFORM_DRIVER);
 #endif
-#ifdef PLATFORM_DRIVER
-	platform_driver_unregister(&PLATFORM_DRIVER);
-#endif
 #ifdef PS3_SYSTEM_BUS_DRIVER
 	ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
 #endif
diff --git a/drivers/usb/host/ohci-tilegx.c b/drivers/usb/host/ohci-tilegx.c
deleted file mode 100644
index d21ca3ce9a30..000000000000
--- a/drivers/usb/host/ohci-tilegx.c
+++ /dev/null
@@ -1,196 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2012 Tilera Corporation. All Rights Reserved.
- */
-
-/*
- * Tilera TILE-Gx USB OHCI host controller driver.
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/usb/tilegx.h>
-#include <linux/usb.h>
-
-#include <asm/homecache.h>
-
-#include <gxio/iorpc_usb_host.h>
-#include <gxio/usb_host.h>
-
-static void tilegx_start_ohc(void)
-{
-}
-
-static void tilegx_stop_ohc(void)
-{
-}
-
-static int tilegx_ohci_start(struct usb_hcd *hcd)
-{
-	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-	int ret;
-
-	ret = ohci_init(ohci);
-	if (ret < 0)
-		return ret;
-
-	ret = ohci_run(ohci);
-	if (ret < 0) {
-		dev_err(hcd->self.controller, "can't start %s\n",
-			hcd->self.bus_name);
-		ohci_stop(hcd);
-		return ret;
-	}
-
-	return 0;
-}
-
-static const struct hc_driver ohci_tilegx_hc_driver = {
-	.description		= hcd_name,
-	.product_desc		= "Tile-Gx OHCI",
-	.hcd_priv_size		= sizeof(struct ohci_hcd),
-
-	/*
-	 * Generic hardware linkage.
-	 */
-	.irq			= ohci_irq,
-	.flags			= HCD_MEMORY | HCD_LOCAL_MEM | HCD_USB11,
-
-	/*
-	 * Basic lifecycle operations.
-	 */
-	.start			= tilegx_ohci_start,
-	.stop			= ohci_stop,
-	.shutdown		= ohci_shutdown,
-
-	/*
-	 * Managing I/O requests and associated device resources.
-	 */
-	.urb_enqueue		= ohci_urb_enqueue,
-	.urb_dequeue		= ohci_urb_dequeue,
-	.endpoint_disable	= ohci_endpoint_disable,
-
-	/*
-	 * Scheduling support.
-	 */
-	.get_frame_number	= ohci_get_frame,
-
-	/*
-	 * Root hub support.
-	 */
-	.hub_status_data	= ohci_hub_status_data,
-	.hub_control		= ohci_hub_control,
-	.start_port_reset	= ohci_start_port_reset,
-};
-
-static int ohci_hcd_tilegx_drv_probe(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd;
-	struct tilegx_usb_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	pte_t pte = { 0 };
-	int my_cpu = smp_processor_id();
-	int ret;
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	/*
-	 * Try to initialize our GXIO context; if we can't, the device
-	 * doesn't exist.
-	 */
-	if (gxio_usb_host_init(&pdata->usb_ctx, pdata->dev_index, 0) != 0)
-		return -ENXIO;
-
-	hcd = usb_create_hcd(&ohci_tilegx_hc_driver, &pdev->dev,
-			     dev_name(&pdev->dev));
-	if (!hcd) {
-		ret = -ENOMEM;
-		goto err_hcd;
-	}
-
-	/*
-	 * We don't use rsrc_start to map in our registers, but seems like
-	 * we ought to set it to something, so we use the register VA.
-	 */
-	hcd->rsrc_start =
-		(ulong) gxio_usb_host_get_reg_start(&pdata->usb_ctx);
-	hcd->rsrc_len = gxio_usb_host_get_reg_len(&pdata->usb_ctx);
-	hcd->regs = gxio_usb_host_get_reg_start(&pdata->usb_ctx);
-
-	tilegx_start_ohc();
-
-	/* Create our IRQs and register them. */
-	pdata->irq = irq_alloc_hwirq(-1);
-	if (!pdata->irq) {
-		ret = -ENXIO;
-		goto err_no_irq;
-	}
-
-	tile_irq_activate(pdata->irq, TILE_IRQ_PERCPU);
-
-	/* Configure interrupts. */
-	ret = gxio_usb_host_cfg_interrupt(&pdata->usb_ctx,
-					  cpu_x(my_cpu), cpu_y(my_cpu),
-					  KERNEL_PL, pdata->irq);
-	if (ret) {
-		ret = -ENXIO;
-		goto err_have_irq;
-	}
-
-	/* Register all of our memory. */
-	pte = pte_set_home(pte, PAGE_HOME_HASH);
-	ret = gxio_usb_host_register_client_memory(&pdata->usb_ctx, pte, 0);
-	if (ret) {
-		ret = -ENXIO;
-		goto err_have_irq;
-	}
-
-	ohci_hcd_init(hcd_to_ohci(hcd));
-
-	ret = usb_add_hcd(hcd, pdata->irq, IRQF_SHARED);
-	if (ret == 0) {
-		platform_set_drvdata(pdev, hcd);
-		device_wakeup_enable(hcd->self.controller);
-		return ret;
-	}
-
-err_have_irq:
-	irq_free_hwirq(pdata->irq);
-err_no_irq:
-	tilegx_stop_ohc();
-	usb_put_hcd(hcd);
-err_hcd:
-	gxio_usb_host_destroy(&pdata->usb_ctx);
-	return ret;
-}
-
-static int ohci_hcd_tilegx_drv_remove(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-	struct tilegx_usb_platform_data *pdata = dev_get_platdata(&pdev->dev);
-
-	usb_remove_hcd(hcd);
-	usb_put_hcd(hcd);
-	tilegx_stop_ohc();
-	gxio_usb_host_destroy(&pdata->usb_ctx);
-	irq_free_hwirq(pdata->irq);
-
-	return 0;
-}
-
-static void ohci_hcd_tilegx_drv_shutdown(struct platform_device *pdev)
-{
-	usb_hcd_platform_shutdown(pdev);
-	ohci_hcd_tilegx_drv_remove(pdev);
-}
-
-static struct platform_driver ohci_hcd_tilegx_driver = {
-	.probe		= ohci_hcd_tilegx_drv_probe,
-	.remove		= ohci_hcd_tilegx_drv_remove,
-	.shutdown	= ohci_hcd_tilegx_drv_shutdown,
-	.driver = {
-		.name	= "tilegx-ohci",
-	}
-};
-
-MODULE_ALIAS("platform:tilegx-ohci");
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 5506a9c03c1f..ad08895e78f9 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -5,7 +5,7 @@
 
 # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
 config USB_MUSB_HDRC
-	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, AW, ...)'
+	tristate 'Inventra Highspeed Dual Role Controller'
 	depends on (USB || USB_GADGET)
 	depends on HAS_IOMEM
 	help
@@ -18,9 +18,6 @@ config USB_MUSB_HDRC
 	  Texas Instruments families using this IP include DaVinci
 	  (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
 
-	  Analog Devices parts using this IP include Blackfin BF54x,
-	  BF525 and BF527.
-
 	  Allwinner SoCs using this IP include A10, A13, A20, ...
 
 	  If you do not know what this is, please say N.
@@ -87,7 +84,7 @@ config USB_MUSB_DA8XX
 config USB_MUSB_TUSB6010
 	tristate "TUSB6010"
 	depends on HAS_IOMEM
-	depends on (ARCH_OMAP2PLUS || COMPILE_TEST) && !BLACKFIN
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
 
 config USB_MUSB_OMAP2PLUS
@@ -107,11 +104,6 @@ config USB_MUSB_DSPS
 	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	depends on OF_IRQ
 
-config USB_MUSB_BLACKFIN
-	tristate "Blackfin"
-	depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
-	depends on NOP_USB_XCEIV
-
 config USB_MUSB_UX500
 	tristate "Ux500 platforms"
 	depends on ARCH_U8500 || COMPILE_TEST
@@ -149,7 +141,7 @@ config USB_UX500_DMA
 
 config USB_INVENTRA_DMA
 	bool 'Inventra'
-	depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
+	depends on USB_MUSB_OMAP2PLUS
 	help
 	  Enable DMA transfers using Mentor's engine.
 
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 79d4d5439164..3a88c79e650c 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -21,7 +21,6 @@ obj-$(CONFIG_USB_MUSB_DSPS)			+= musb_dsps.o
 obj-$(CONFIG_USB_MUSB_TUSB6010)			+= tusb6010.o
 obj-$(CONFIG_USB_MUSB_DAVINCI)			+= davinci.o
 obj-$(CONFIG_USB_MUSB_DA8XX)			+= da8xx.o
-obj-$(CONFIG_USB_MUSB_BLACKFIN)			+= blackfin.o
 obj-$(CONFIG_USB_MUSB_UX500)			+= ux500.o
 obj-$(CONFIG_USB_MUSB_JZ4740)			+= jz4740.o
 obj-$(CONFIG_USB_MUSB_SUNXI)			+= sunxi.o
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
deleted file mode 100644
index 0a98dcd66d19..000000000000
--- a/drivers/usb/musb/blackfin.c
+++ /dev/null
@@ -1,623 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * MUSB OTG controller driver for Blackfin Processors
- *
- * Copyright 2006-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/prefetch.h>
-#include <linux/usb/usb_phy_generic.h>
-
-#include <asm/cacheflush.h>
-
-#include "musb_core.h"
-#include "musbhsdma.h"
-#include "blackfin.h"
-
-struct bfin_glue {
-	struct device		*dev;
-	struct platform_device	*musb;
-	struct platform_device	*phy;
-};
-#define glue_to_musb(g)		platform_get_drvdata(g->musb)
-
-static u32 bfin_fifo_offset(u8 epnum)
-{
-	return USB_OFFSET(USB_EP0_FIFO) + (epnum * 8);
-}
-
-static u8 bfin_readb(const void __iomem *addr, unsigned offset)
-{
-	return (u8)(bfin_read16(addr + offset));
-}
-
-static u16 bfin_readw(const void __iomem *addr, unsigned offset)
-{
-	return bfin_read16(addr + offset);
-}
-
-static u32 bfin_readl(const void __iomem *addr, unsigned offset)
-{
-	return (u32)(bfin_read16(addr + offset));
-}
-
-static void bfin_writeb(void __iomem *addr, unsigned offset, u8 data)
-{
-	bfin_write16(addr + offset, (u16)data);
-}
-
-static void bfin_writew(void __iomem *addr, unsigned offset, u16 data)
-{
-	bfin_write16(addr + offset, data);
-}
-
-static void bfin_writel(void __iomem *addr, unsigned offset, u32 data)
-{
-	bfin_write16(addr + offset, (u16)data);
-}
-
-/*
- * Load an endpoint's FIFO
- */
-static void bfin_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
-{
-	struct musb *musb = hw_ep->musb;
-	void __iomem *fifo = hw_ep->fifo;
-	void __iomem *epio = hw_ep->regs;
-	u8 epnum = hw_ep->epnum;
-
-	prefetch((u8 *)src);
-
-	musb_writew(epio, MUSB_TXCOUNT, len);
-
-	dev_dbg(musb->controller, "TX ep%d fifo %p count %d buf %p, epio %p\n",
-			hw_ep->epnum, fifo, len, src, epio);
-
-	dump_fifo_data(src, len);
-
-	if (!ANOMALY_05000380 && epnum != 0) {
-		u16 dma_reg;
-
-		flush_dcache_range((unsigned long)src,
-			(unsigned long)(src + len));
-
-		/* Setup DMA address register */
-		dma_reg = (u32)src;
-		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
-		SSYNC();
-
-		dma_reg = (u32)src >> 16;
-		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
-		SSYNC();
-
-		/* Setup DMA count register */
-		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
-		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
-		SSYNC();
-
-		/* Enable the DMA */
-		dma_reg = (epnum << 4) | DMA_ENA | INT_ENA | DIRECTION;
-		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
-		SSYNC();
-
-		/* Wait for complete */
-		while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
-			cpu_relax();
-
-		/* acknowledge dma interrupt */
-		bfin_write_USB_DMA_INTERRUPT(1 << epnum);
-		SSYNC();
-
-		/* Reset DMA */
-		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
-		SSYNC();
-	} else {
-		SSYNC();
-
-		if (unlikely((unsigned long)src & 0x01))
-			outsw_8((unsigned long)fifo, src, (len + 1) >> 1);
-		else
-			outsw((unsigned long)fifo, src, (len + 1) >> 1);
-	}
-}
-/*
- * Unload an endpoint's FIFO
- */
-static void bfin_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
-{
-	struct musb *musb = hw_ep->musb;
-	void __iomem *fifo = hw_ep->fifo;
-	u8 epnum = hw_ep->epnum;
-
-	if (ANOMALY_05000467 && epnum != 0) {
-		u16 dma_reg;
-
-		invalidate_dcache_range((unsigned long)dst,
-			(unsigned long)(dst + len));
-
-		/* Setup DMA address register */
-		dma_reg = (u32)dst;
-		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
-		SSYNC();
-
-		dma_reg = (u32)dst >> 16;
-		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
-		SSYNC();
-
-		/* Setup DMA count register */
-		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
-		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
-		SSYNC();
-
-		/* Enable the DMA */
-		dma_reg = (epnum << 4) | DMA_ENA | INT_ENA;
-		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
-		SSYNC();
-
-		/* Wait for complete */
-		while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
-			cpu_relax();
-
-		/* acknowledge dma interrupt */
-		bfin_write_USB_DMA_INTERRUPT(1 << epnum);
-		SSYNC();
-
-		/* Reset DMA */
-		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
-		SSYNC();
-	} else {
-		SSYNC();
-		/* Read the last byte of packet with odd size from address fifo + 4
-		 * to trigger 1 byte access to EP0 FIFO.
-		 */
-		if (len == 1)
-			*dst = (u8)inw((unsigned long)fifo + 4);
-		else {
-			if (unlikely((unsigned long)dst & 0x01))
-				insw_8((unsigned long)fifo, dst, len >> 1);
-			else
-				insw((unsigned long)fifo, dst, len >> 1);
-
-			if (len & 0x01)
-				*(dst + len - 1) = (u8)inw((unsigned long)fifo + 4);
-		}
-	}
-	dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
-			'R', hw_ep->epnum, fifo, len, dst);
-
-	dump_fifo_data(dst, len);
-}
-
-static irqreturn_t blackfin_interrupt(int irq, void *__hci)
-{
-	unsigned long	flags;
-	irqreturn_t	retval = IRQ_NONE;
-	struct musb	*musb = __hci;
-
-	spin_lock_irqsave(&musb->lock, flags);
-
-	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
-	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
-	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
-
-	if (musb->int_usb || musb->int_tx || musb->int_rx) {
-		musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb);
-		musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx);
-		musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx);
-		retval = musb_interrupt(musb);
-	}
-
-	/* Start sampling ID pin, when plug is removed from MUSB */
-	if ((musb->xceiv->otg->state == OTG_STATE_B_IDLE
-		|| musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON) ||
-		(musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) {
-		mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY);
-		musb->a_wait_bcon = TIMER_DELAY;
-	}
-
-	spin_unlock_irqrestore(&musb->lock, flags);
-
-	return retval;
-}
-
-static void musb_conn_timer_handler(struct timer_list *t)
-{
-	struct musb *musb = from_timer(musb, t, dev_timer);
-	unsigned long flags;
-	u16 val;
-	static u8 toggle;
-
-	spin_lock_irqsave(&musb->lock, flags);
-	switch (musb->xceiv->otg->state) {
-	case OTG_STATE_A_IDLE:
-	case OTG_STATE_A_WAIT_BCON:
-		/* Start a new session */
-		val = musb_readw(musb->mregs, MUSB_DEVCTL);
-		val &= ~MUSB_DEVCTL_SESSION;
-		musb_writew(musb->mregs, MUSB_DEVCTL, val);
-		val |= MUSB_DEVCTL_SESSION;
-		musb_writew(musb->mregs, MUSB_DEVCTL, val);
-		/* Check if musb is host or peripheral. */
-		val = musb_readw(musb->mregs, MUSB_DEVCTL);
-
-		if (!(val & MUSB_DEVCTL_BDEVICE)) {
-			gpio_set_value(musb->config->gpio_vrsel, 1);
-			musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
-		} else {
-			gpio_set_value(musb->config->gpio_vrsel, 0);
-			/* Ignore VBUSERROR and SUSPEND IRQ */
-			val = musb_readb(musb->mregs, MUSB_INTRUSBE);
-			val &= ~MUSB_INTR_VBUSERROR;
-			musb_writeb(musb->mregs, MUSB_INTRUSBE, val);
-
-			val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
-			musb_writeb(musb->mregs, MUSB_INTRUSB, val);
-			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
-		}
-		mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY);
-		break;
-	case OTG_STATE_B_IDLE:
-		/*
-		 * Start a new session.  It seems that MUSB needs taking
-		 * some time to recognize the type of the plug inserted?
-		 */
-		val = musb_readw(musb->mregs, MUSB_DEVCTL);
-		val |= MUSB_DEVCTL_SESSION;
-		musb_writew(musb->mregs, MUSB_DEVCTL, val);
-		val = musb_readw(musb->mregs, MUSB_DEVCTL);
-
-		if (!(val & MUSB_DEVCTL_BDEVICE)) {
-			gpio_set_value(musb->config->gpio_vrsel, 1);
-			musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
-		} else {
-			gpio_set_value(musb->config->gpio_vrsel, 0);
-
-			/* Ignore VBUSERROR and SUSPEND IRQ */
-			val = musb_readb(musb->mregs, MUSB_INTRUSBE);
-			val &= ~MUSB_INTR_VBUSERROR;
-			musb_writeb(musb->mregs, MUSB_INTRUSBE, val);
-
-			val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
-			musb_writeb(musb->mregs, MUSB_INTRUSB, val);
-
-			/* Toggle the Soft Conn bit, so that we can response to
-			 * the inserting of either A-plug or B-plug.
-			 */
-			if (toggle) {
-				val = musb_readb(musb->mregs, MUSB_POWER);
-				val &= ~MUSB_POWER_SOFTCONN;
-				musb_writeb(musb->mregs, MUSB_POWER, val);
-				toggle = 0;
-			} else {
-				val = musb_readb(musb->mregs, MUSB_POWER);
-				val |= MUSB_POWER_SOFTCONN;
-				musb_writeb(musb->mregs, MUSB_POWER, val);
-				toggle = 1;
-			}
-			/* The delay time is set to 1/4 second by default,
-			 * shortening it, if accelerating A-plug detection
-			 * is needed in OTG mode.
-			 */
-			mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY / 4);
-		}
-		break;
-	default:
-		dev_dbg(musb->controller, "%s state not handled\n",
-			usb_otg_state_string(musb->xceiv->otg->state));
-		break;
-	}
-	spin_unlock_irqrestore(&musb->lock, flags);
-
-	dev_dbg(musb->controller, "state is %s\n",
-		usb_otg_state_string(musb->xceiv->otg->state));
-}
-
-static void bfin_musb_enable(struct musb *musb)
-{
-	/* REVISIT is this really correct ? */
-}
-
-static void bfin_musb_disable(struct musb *musb)
-{
-}
-
-static void bfin_musb_set_vbus(struct musb *musb, int is_on)
-{
-	int value = musb->config->gpio_vrsel_active;
-	if (!is_on)
-		value = !value;
-	gpio_set_value(musb->config->gpio_vrsel, value);
-
-	dev_dbg(musb->controller, "VBUS %s, devctl %02x "
-		/* otg %3x conf %08x prcm %08x */ "\n",
-		usb_otg_state_string(musb->xceiv->otg->state),
-		musb_readb(musb->mregs, MUSB_DEVCTL));
-}
-
-static int bfin_musb_set_power(struct usb_phy *x, unsigned mA)
-{
-	return 0;
-}
-
-static int bfin_musb_vbus_status(struct musb *musb)
-{
-	return 0;
-}
-
-static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode)
-{
-	return -EIO;
-}
-
-static int bfin_musb_adjust_channel_params(struct dma_channel *channel,
-				u16 packet_sz, u8 *mode,
-				dma_addr_t *dma_addr, u32 *len)
-{
-	struct musb_dma_channel *musb_channel = channel->private_data;
-
-	/*
-	 * Anomaly 05000450 might cause data corruption when using DMA
-	 * MODE 1 transmits with short packet.  So to work around this,
-	 * we truncate all MODE 1 transfers down to a multiple of the
-	 * max packet size, and then do the last short packet transfer
-	 * (if there is any) using MODE 0.
-	 */
-	if (ANOMALY_05000450) {
-		if (musb_channel->transmit && *mode == 1)
-			*len = *len - (*len % packet_sz);
-	}
-
-	return 0;
-}
-
-static void bfin_musb_reg_init(struct musb *musb)
-{
-	if (ANOMALY_05000346) {
-		bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
-		SSYNC();
-	}
-
-	if (ANOMALY_05000347) {
-		bfin_write_USB_APHY_CNTRL(0x0);
-		SSYNC();
-	}
-
-	/* Configure PLL oscillator register */
-	bfin_write_USB_PLLOSC_CTRL(0x3080 |
-			((480/musb->config->clkin) << 1));
-	SSYNC();
-
-	bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1);
-	SSYNC();
-
-	bfin_write_USB_EP_NI0_RXMAXP(64);
-	SSYNC();
-
-	bfin_write_USB_EP_NI0_TXMAXP(64);
-	SSYNC();
-
-	/* Route INTRUSB/INTR_RX/INTR_TX to USB_INT0*/
-	bfin_write_USB_GLOBINTR(0x7);
-	SSYNC();
-
-	bfin_write_USB_GLOBAL_CTL(GLOBAL_ENA | EP1_TX_ENA | EP2_TX_ENA |
-				EP3_TX_ENA | EP4_TX_ENA | EP5_TX_ENA |
-				EP6_TX_ENA | EP7_TX_ENA | EP1_RX_ENA |
-				EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
-				EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
-	SSYNC();
-}
-
-static int bfin_musb_init(struct musb *musb)
-{
-
-	/*
-	 * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
-	 * and OTG HOST modes, while rev 1.1 and greater require PE7 to
-	 * be low for DEVICE mode and high for HOST mode. We set it high
-	 * here because we are in host mode
-	 */
-
-	if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
-		printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d\n",
-			musb->config->gpio_vrsel);
-		return -ENODEV;
-	}
-	gpio_direction_output(musb->config->gpio_vrsel, 0);
-
-	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (IS_ERR_OR_NULL(musb->xceiv)) {
-		gpio_free(musb->config->gpio_vrsel);
-		return -EPROBE_DEFER;
-	}
-
-	bfin_musb_reg_init(musb);
-
-	timer_setup(&musb->dev_timer, musb_conn_timer_handler, 0);
-
-	musb->xceiv->set_power = bfin_musb_set_power;
-
-	musb->isr = blackfin_interrupt;
-	musb->double_buffer_not_ok = true;
-
-	return 0;
-}
-
-static int bfin_musb_exit(struct musb *musb)
-{
-	gpio_free(musb->config->gpio_vrsel);
-	usb_put_phy(musb->xceiv);
-
-	return 0;
-}
-
-static const struct musb_platform_ops bfin_ops = {
-	.quirks		= MUSB_DMA_INVENTRA,
-	.init		= bfin_musb_init,
-	.exit		= bfin_musb_exit,
-
-	.fifo_offset	= bfin_fifo_offset,
-	.readb		= bfin_readb,
-	.writeb		= bfin_writeb,
-	.readw		= bfin_readw,
-	.writew		= bfin_writew,
-	.readl		= bfin_readl,
-	.writel		= bfin_writel,
-	.fifo_mode	= 2,
-	.read_fifo	= bfin_read_fifo,
-	.write_fifo	= bfin_write_fifo,
-#ifdef CONFIG_USB_INVENTRA_DMA
-	.dma_init	= musbhs_dma_controller_create,
-	.dma_exit	= musbhs_dma_controller_destroy,
-#endif
-	.enable		= bfin_musb_enable,
-	.disable	= bfin_musb_disable,
-
-	.set_mode	= bfin_musb_set_mode,
-
-	.vbus_status	= bfin_musb_vbus_status,
-	.set_vbus	= bfin_musb_set_vbus,
-
-	.adjust_channel_params = bfin_musb_adjust_channel_params,
-};
-
-static u64 bfin_dmamask = DMA_BIT_MASK(32);
-
-static int bfin_probe(struct platform_device *pdev)
-{
-	struct resource musb_resources[2];
-	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
-	struct platform_device		*musb;
-	struct bfin_glue		*glue;
-
-	int				ret = -ENOMEM;
-
-	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
-	if (!glue)
-		goto err0;
-
-	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
-	if (!musb)
-		goto err0;
-
-	musb->dev.parent		= &pdev->dev;
-	musb->dev.dma_mask		= &bfin_dmamask;
-	musb->dev.coherent_dma_mask	= bfin_dmamask;
-
-	glue->dev			= &pdev->dev;
-	glue->musb			= musb;
-
-	pdata->platform_ops		= &bfin_ops;
-
-	glue->phy = usb_phy_generic_register();
-	if (IS_ERR(glue->phy))
-		goto err1;
-	platform_set_drvdata(pdev, glue);
-
-	memset(musb_resources, 0x00, sizeof(*musb_resources) *
-			ARRAY_SIZE(musb_resources));
-
-	musb_resources[0].name = pdev->resource[0].name;
-	musb_resources[0].start = pdev->resource[0].start;
-	musb_resources[0].end = pdev->resource[0].end;
-	musb_resources[0].flags = pdev->resource[0].flags;
-
-	musb_resources[1].name = pdev->resource[1].name;
-	musb_resources[1].start = pdev->resource[1].start;
-	musb_resources[1].end = pdev->resource[1].end;
-	musb_resources[1].flags = pdev->resource[1].flags;
-
-	ret = platform_device_add_resources(musb, musb_resources,
-			ARRAY_SIZE(musb_resources));
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add resources\n");
-		goto err2;
-	}
-
-	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add platform_data\n");
-		goto err2;
-	}
-
-	ret = platform_device_add(musb);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register musb device\n");
-		goto err2;
-	}
-
-	return 0;
-
-err2:
-	usb_phy_generic_unregister(glue->phy);
-
-err1:
-	platform_device_put(musb);
-
-err0:
-	return ret;
-}
-
-static int bfin_remove(struct platform_device *pdev)
-{
-	struct bfin_glue		*glue = platform_get_drvdata(pdev);
-
-	platform_device_unregister(glue->musb);
-	usb_phy_generic_unregister(glue->phy);
-
-	return 0;
-}
-
-static int __maybe_unused bfin_suspend(struct device *dev)
-{
-	struct bfin_glue	*glue = dev_get_drvdata(dev);
-	struct musb		*musb = glue_to_musb(glue);
-
-	if (is_host_active(musb))
-		/*
-		 * During hibernate gpio_vrsel will change from high to low
-		 * low which will generate wakeup event resume the system
-		 * immediately.  Set it to 0 before hibernate to avoid this
-		 * wakeup event.
-		 */
-		gpio_set_value(musb->config->gpio_vrsel, 0);
-
-	return 0;
-}
-
-static int __maybe_unused bfin_resume(struct device *dev)
-{
-	struct bfin_glue	*glue = dev_get_drvdata(dev);
-	struct musb		*musb = glue_to_musb(glue);
-
-	bfin_musb_reg_init(musb);
-
-	return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(bfin_pm_ops, bfin_suspend, bfin_resume);
-
-static struct platform_driver bfin_driver = {
-	.probe		= bfin_probe,
-	.remove		= bfin_remove,
-	.driver		= {
-		.name	= "musb-blackfin",
-		.pm	= &bfin_pm_ops,
-	},
-};
-
-MODULE_DESCRIPTION("Blackfin MUSB Glue Layer");
-MODULE_AUTHOR("Bryan Wy <cooloney@kernel.org>");
-MODULE_LICENSE("GPL v2");
-module_platform_driver(bfin_driver);
diff --git a/drivers/usb/musb/blackfin.h b/drivers/usb/musb/blackfin.h
deleted file mode 100644
index 5b149915b0f8..000000000000
--- a/drivers/usb/musb/blackfin.h
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2007 by Analog Devices, Inc.
- */
-
-#ifndef __MUSB_BLACKFIN_H__
-#define __MUSB_BLACKFIN_H__
-
-/*
- * Blackfin specific definitions
- */
-
-/* Anomalies notes:
- *
- *  05000450 - USB DMA Mode 1 Short Packet Data Corruption:
- *             MUSB driver is designed to transfer buffer of N * maxpacket size
- *             in DMA mode 1 and leave the rest of the data to the next
- *             transfer in DMA mode 0, so we never transmit a short packet in
- *             DMA mode 1.
- *
- *  05000463 - This anomaly doesn't affect this driver since it
- *             never uses L1 or L2 memory as data destination.
- *
- *  05000464 - This anomaly doesn't affect this driver since it
- *             never uses L1 or L2 memory as data source.
- *
- *  05000465 - The anomaly can be seen when SCLK is over 100 MHz, and there is
- *             no way to workaround for bulk endpoints.  Since the wMaxPackSize
- *             of bulk is less than or equal to 512, while the fifo size of
- *             endpoint 5, 6, 7 is 1024, the double buffer mode is enabled
- *             automatically when these endpoints are used for bulk OUT.
- *
- *  05000466 - This anomaly doesn't affect this driver since it never mixes
- *             concurrent DMA and core accesses to the TX endpoint FIFOs.
- *
- *  05000467 - The workaround for this anomaly will introduce another
- *             anomaly - 05000465.
- */
-
-/* The Mentor USB DMA engine on BF52x (silicon v0.0 and v0.1) seems to be
- * unstable in host mode.  This may be caused by Anomaly 05000380.  After
- * digging out the root cause, we will change this number accordingly.
- * So, need to either use silicon v0.2+ or disable DMA mode in MUSB.
- */
-#if ANOMALY_05000380 && defined(CONFIG_BF52x) && \
-	!defined(CONFIG_MUSB_PIO_ONLY)
-# error "Please use PIO mode in MUSB driver on bf52x chip v0.0 and v0.1"
-#endif
-
-#undef DUMP_FIFO_DATA
-#ifdef DUMP_FIFO_DATA
-static void dump_fifo_data(u8 *buf, u16 len)
-{
-	u8 *tmp = buf;
-	int i;
-
-	for (i = 0; i < len; i++) {
-		if (!(i % 16) && i)
-			pr_debug("\n");
-		pr_debug("%02x ", *tmp++);
-	}
-	pr_debug("\n");
-}
-#else
-#define dump_fifo_data(buf, len)	do {} while (0)
-#endif
-
-
-#define USB_DMA_BASE		USB_DMA_INTERRUPT
-#define USB_DMAx_CTRL		0x04
-#define USB_DMAx_ADDR_LOW	0x08
-#define USB_DMAx_ADDR_HIGH	0x0C
-#define USB_DMAx_COUNT_LOW	0x10
-#define USB_DMAx_COUNT_HIGH	0x14
-
-#define USB_DMA_REG(ep, reg)	(USB_DMA_BASE + 0x20 * ep + reg)
-
-/* Almost 1 second */
-#define TIMER_DELAY	(1 * HZ)
-
-#endif	/* __MUSB_BLACKFIN_H__ */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 4d723077be2b..fb5e4523dc28 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -126,7 +126,6 @@ EXPORT_SYMBOL_GPL(musb_get_mode);
 
 /*-------------------------------------------------------------------------*/
 
-#ifndef CONFIG_BLACKFIN
 static int musb_ulpi_read(struct usb_phy *phy, u32 reg)
 {
 	void __iomem *addr = phy->io_priv;
@@ -208,10 +207,6 @@ out:
 
 	return ret;
 }
-#else
-#define musb_ulpi_read		NULL
-#define musb_ulpi_write		NULL
-#endif
 
 static struct usb_phy_io_ops musb_ulpi_access = {
 	.read = musb_ulpi_read,
@@ -2173,7 +2168,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	 *   - initializes musb->xceiv, usually by otg_get_phy()
 	 *   - stops powering VBUS
 	 *
-	 * There are various transceiver configurations.  Blackfin,
+	 * There are various transceiver configurations.
 	 * DaVinci, TUSB60x0, and others integrate them.  OMAP3 uses
 	 * external/discrete ones in various flavors (twl4030 family,
 	 * isp1504, non-OTG, etc) mostly hooking up through ULPI.
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 385841ee6f46..8a74cb2907f8 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -414,19 +414,6 @@ struct musb {
 	struct usb_gadget_driver *gadget_driver;	/* its driver */
 	struct usb_hcd		*hcd;			/* the usb hcd */
 
-	/*
-	 * FIXME: Remove this flag.
-	 *
-	 * This is only added to allow Blackfin to work
-	 * with current driver. For some unknown reason
-	 * Blackfin doesn't work with double buffering
-	 * and that's enabled by default.
-	 *
-	 * We added this flag to forcefully disable double
-	 * buffering until we get it working.
-	 */
-	unsigned                double_buffer_not_ok:1;
-
 	const struct musb_hdrc_config *config;
 
 	int			xceiv_old_state;
@@ -467,34 +454,6 @@ static inline char *musb_ep_xfertype_string(u8 type)
 	return s;
 }
 
-#ifdef CONFIG_BLACKFIN
-static inline int musb_read_fifosize(struct musb *musb,
-		struct musb_hw_ep *hw_ep, u8 epnum)
-{
-	musb->nr_endpoints++;
-	musb->epmask |= (1 << epnum);
-
-	if (epnum < 5) {
-		hw_ep->max_packet_sz_tx = 128;
-		hw_ep->max_packet_sz_rx = 128;
-	} else {
-		hw_ep->max_packet_sz_tx = 1024;
-		hw_ep->max_packet_sz_rx = 1024;
-	}
-	hw_ep->is_shared_fifo = false;
-
-	return 0;
-}
-
-static inline void musb_configure_ep0(struct musb *musb)
-{
-	musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
-	musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
-	musb->endpoints[0].is_shared_fifo = true;
-}
-
-#else
-
 static inline int musb_read_fifosize(struct musb *musb,
 		struct musb_hw_ep *hw_ep, u8 epnum)
 {
@@ -531,8 +490,6 @@ static inline void musb_configure_ep0(struct musb *musb)
 	musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
 	musb->endpoints[0].is_shared_fifo = true;
 }
-#endif /* CONFIG_BLACKFIN */
-
 
 /***************************** Glue it together *****************************/
 
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 7cf5a1bbdaff..7dac456f7ebc 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -70,7 +70,6 @@ static const struct musb_register_map musb_regmap[] = {
 	{ "DMA_CNTLch7",	0x274,	16 },
 	{ "DMA_ADDRch7",	0x278,	32 },
 	{ "DMA_COUNTch7",	0x27C,	32 },
-#ifndef CONFIG_BLACKFIN
 	{ "ConfigData",	MUSB_CONFIGDATA,8 },
 	{ "BabbleCtl",	MUSB_BABBLE_CTL,8 },
 	{ "TxFIFOsz",	MUSB_TXFIFOSZ,	8 },
@@ -79,7 +78,6 @@ static const struct musb_register_map musb_regmap[] = {
 	{ "RxFIFOadd",	MUSB_RXFIFOADD,	16 },
 	{ "EPInfo",	MUSB_EPINFO,	8 },
 	{ "RAMInfo",	MUSB_RAMINFO,	8 },
-#endif
 	{  }	/* Terminating Entry */
 };
 
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index a4241f4d430e..0fc8cd0c2a5c 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h
@@ -80,17 +80,6 @@ struct musb_hw_ep;
 #define	is_cppi_enabled(musb)	0
 #endif
 
-/* Anomaly 05000456 - USB Receive Interrupt Is Not Generated in DMA Mode 1
- *	Only allow DMA mode 1 to be used when the USB will actually generate the
- *	interrupts we expect.
- */
-#ifdef CONFIG_BLACKFIN
-# undef USE_MODE1
-# if !ANOMALY_05000456
-#  define USE_MODE1
-# endif
-#endif
-
 /*
  * DMA channel status ... updated by the dma controller driver whenever that
  * status changes, and protected by the overall controller spinlock.
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 293e5b8da565..e564695c6c8d 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -995,15 +995,11 @@ static int musb_gadget_enable(struct usb_ep *ep,
 		/* Set TXMAXP with the FIFO size of the endpoint
 		 * to disable double buffering mode.
 		 */
-		if (musb->double_buffer_not_ok) {
-			musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
-		} else {
-			if (can_bulk_split(musb, musb_ep->type))
-				musb_ep->hb_mult = (hw_ep->max_packet_sz_tx /
-							musb_ep->packet_sz) - 1;
-			musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
-					| (musb_ep->hb_mult << 11));
-		}
+		if (can_bulk_split(musb, musb_ep->type))
+			musb_ep->hb_mult = (hw_ep->max_packet_sz_tx /
+						musb_ep->packet_sz) - 1;
+		musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
+				| (musb_ep->hb_mult << 11));
 
 		csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
 		if (musb_readw(regs, MUSB_TXCSR)
@@ -1038,11 +1034,8 @@ static int musb_gadget_enable(struct usb_ep *ep,
 		/* Set RXMAXP with the FIFO size of the endpoint
 		 * to disable double buffering mode.
 		 */
-		if (musb->double_buffer_not_ok)
-			musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx);
-		else
-			musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
-					| (musb_ep->hb_mult << 11));
+		musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
+				| (musb_ep->hb_mult << 11));
 
 		/* force shared fifo to OUT-only mode */
 		if (hw_ep->is_shared_fifo) {
@@ -1680,40 +1673,6 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
 	return 0;
 }
 
-#ifdef CONFIG_BLACKFIN
-static struct usb_ep *musb_match_ep(struct usb_gadget *g,
-		struct usb_endpoint_descriptor *desc,
-		struct usb_ss_ep_comp_descriptor *ep_comp)
-{
-	struct usb_ep *ep = NULL;
-
-	switch (usb_endpoint_type(desc)) {
-	case USB_ENDPOINT_XFER_ISOC:
-	case USB_ENDPOINT_XFER_BULK:
-		if (usb_endpoint_dir_in(desc))
-			ep = gadget_find_ep_by_name(g, "ep5in");
-		else
-			ep = gadget_find_ep_by_name(g, "ep6out");
-		break;
-	case USB_ENDPOINT_XFER_INT:
-		if (usb_endpoint_dir_in(desc))
-			ep = gadget_find_ep_by_name(g, "ep1in");
-		else
-			ep = gadget_find_ep_by_name(g, "ep2out");
-		break;
-	default:
-		break;
-	}
-
-	if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
-		return ep;
-
-	return NULL;
-}
-#else
-#define musb_match_ep NULL
-#endif
-
 static int musb_gadget_start(struct usb_gadget *g,
 		struct usb_gadget_driver *driver);
 static int musb_gadget_stop(struct usb_gadget *g);
@@ -1727,7 +1686,6 @@ static const struct usb_gadget_ops musb_gadget_operations = {
 	.pullup			= musb_gadget_pullup,
 	.udc_start		= musb_gadget_start,
 	.udc_stop		= musb_gadget_stop,
-	.match_ep		= musb_match_ep,
 };
 
 /* ----------------------------------------------------------------------- */
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 45ed32c2cba9..3a8451a15f7f 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -574,11 +574,8 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum)
 	/* Set RXMAXP with the FIFO size of the endpoint
 	 * to disable double buffer mode.
 	 */
-	if (musb->double_buffer_not_ok)
-		musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx);
-	else
-		musb_writew(ep->regs, MUSB_RXMAXP,
-				qh->maxpacket | ((qh->hb_mult - 1) << 11));
+	musb_writew(ep->regs, MUSB_RXMAXP,
+			qh->maxpacket | ((qh->hb_mult - 1) << 11));
 
 	ep->rx_reinit = 0;
 }
@@ -804,10 +801,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 		/* protocol/endpoint/interval/NAKlimit */
 		if (epnum) {
 			musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
-			if (musb->double_buffer_not_ok) {
-				musb_writew(epio, MUSB_TXMAXP,
-						hw_ep->max_packet_sz_tx);
-			} else if (can_bulk_split(musb, qh->type)) {
+			if (can_bulk_split(musb, qh->type)) {
 				qh->hb_mult = hw_ep->max_packet_sz_tx
 						/ packet_sz;
 				musb_writew(epio, MUSB_TXMAXP, packet_sz
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index a4beba184798..88466622c89f 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -195,8 +195,6 @@
 #define MUSB_HUBADDR_MULTI_TT		0x80
 
 
-#ifndef CONFIG_BLACKFIN
-
 /*
  * Common USB registers
  */
@@ -416,184 +414,4 @@ static inline u8 musb_read_txhubport(struct musb *musb, u8 epnum)
 			  musb->io.busctl_offset(epnum, MUSB_TXHUBPORT));
 }
 
-#else /* CONFIG_BLACKFIN */
-
-#define USB_BASE		USB_FADDR
-#define USB_OFFSET(reg)		(reg - USB_BASE)
-
-/*
- * Common USB registers
- */
-#define MUSB_FADDR		USB_OFFSET(USB_FADDR)	/* 8-bit */
-#define MUSB_POWER		USB_OFFSET(USB_POWER)	/* 8-bit */
-#define MUSB_INTRTX		USB_OFFSET(USB_INTRTX)	/* 16-bit */
-#define MUSB_INTRRX		USB_OFFSET(USB_INTRRX)
-#define MUSB_INTRTXE		USB_OFFSET(USB_INTRTXE)
-#define MUSB_INTRRXE		USB_OFFSET(USB_INTRRXE)
-#define MUSB_INTRUSB		USB_OFFSET(USB_INTRUSB)	/* 8 bit */
-#define MUSB_INTRUSBE		USB_OFFSET(USB_INTRUSBE)/* 8 bit */
-#define MUSB_FRAME		USB_OFFSET(USB_FRAME)
-#define MUSB_INDEX		USB_OFFSET(USB_INDEX)	/* 8 bit */
-#define MUSB_TESTMODE		USB_OFFSET(USB_TESTMODE)/* 8 bit */
-
-/*
- * Additional Control Registers
- */
-
-#define MUSB_DEVCTL		USB_OFFSET(USB_OTG_DEV_CTL)	/* 8 bit */
-
-#define MUSB_LINKINFO		USB_OFFSET(USB_LINKINFO)/* 8 bit */
-#define MUSB_VPLEN		USB_OFFSET(USB_VPLEN)	/* 8 bit */
-#define MUSB_HS_EOF1		USB_OFFSET(USB_HS_EOF1)	/* 8 bit */
-#define MUSB_FS_EOF1		USB_OFFSET(USB_FS_EOF1)	/* 8 bit */
-#define MUSB_LS_EOF1		USB_OFFSET(USB_LS_EOF1)	/* 8 bit */
-
-/* Offsets to endpoint registers */
-#define MUSB_TXMAXP		0x00
-#define MUSB_TXCSR		0x04
-#define MUSB_CSR0		MUSB_TXCSR	/* Re-used for EP0 */
-#define MUSB_RXMAXP		0x08
-#define MUSB_RXCSR		0x0C
-#define MUSB_RXCOUNT		0x10
-#define MUSB_COUNT0		MUSB_RXCOUNT	/* Re-used for EP0 */
-#define MUSB_TXTYPE		0x14
-#define MUSB_TYPE0		MUSB_TXTYPE	/* Re-used for EP0 */
-#define MUSB_TXINTERVAL		0x18
-#define MUSB_NAKLIMIT0		MUSB_TXINTERVAL	/* Re-used for EP0 */
-#define MUSB_RXTYPE		0x1C
-#define MUSB_RXINTERVAL		0x20
-#define MUSB_TXCOUNT		0x28
-
-/* Offsets to endpoint registers in indexed model (using INDEX register) */
-#define MUSB_INDEXED_OFFSET(_epnum, _offset)	\
-	(0x40 + (_offset))
-
-/* Offsets to endpoint registers in flat models */
-#define MUSB_FLAT_OFFSET(_epnum, _offset)	\
-	(USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
-
-/* Not implemented - HW has separate Tx/Rx FIFO */
-#define MUSB_TXCSR_MODE			0x0000
-
-static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
-{
-}
-
-static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
-{
-}
-
-static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
-{
-}
-
-static inline void  musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
-{
-}
-
-static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
-{
-}
-
-static inline u8 musb_read_txfifosz(void __iomem *mbase)
-{
-	return 0;
-}
-
-static inline u16 musb_read_txfifoadd(void __iomem *mbase)
-{
-	return 0;
-}
-
-static inline u8 musb_read_rxfifosz(void __iomem *mbase)
-{
-	return 0;
-}
-
-static inline u16  musb_read_rxfifoadd(void __iomem *mbase)
-{
-	return 0;
-}
-
-static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
-{
-	return 0;
-}
-
-static inline u8 musb_read_configdata(void __iomem *mbase)
-{
-	return 0;
-}
-
-static inline u16 musb_read_hwvers(void __iomem *mbase)
-{
-	/*
-	 * This register is invisible on Blackfin, actually the MUSB
-	 * RTL version of Blackfin is 1.9, so just hardcode its value.
-	 */
-	return MUSB_HWVERS_1900;
-}
-
-static inline void musb_write_rxfunaddr(void __iomem *mbase, u8 epnum,
-		u8 qh_addr_req)
-{
-}
-
-static inline void musb_write_rxhubaddr(void __iomem *mbase, u8 epnum,
-		u8 qh_h_addr_reg)
-{
-}
-
-static inline void musb_write_rxhubport(void __iomem *mbase, u8 epnum,
-		u8 qh_h_port_reg)
-{
-}
-
-static inline void  musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
-		u8 qh_addr_reg)
-{
-}
-
-static inline void  musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
-		u8 qh_addr_reg)
-{
-}
-
-static inline void  musb_write_txhubport(void __iomem *mbase, u8 epnum,
-		u8 qh_h_port_reg)
-{
-}
-
-static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
-{
-	return 0;
-}
-
-static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
-{
-	return 0;
-}
-
-static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
-{
-	return 0;
-}
-
-static inline u8  musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
-{
-	return 0;
-}
-
-static inline u8  musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
-{
-	return 0;
-}
-
-static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
-{
-	return 0;
-}
-
-#endif /* CONFIG_BLACKFIN */
-
 #endif	/* __MUSB_REGS_H__ */
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 21fb9e6622f3..4389fc3422bd 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -235,11 +235,6 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
 
 	int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
 
-#ifdef CONFIG_BLACKFIN
-	/* Clear DMA interrupt flags */
-	musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma);
-#endif
-
 	if (!int_hsdma) {
 		musb_dbg(musb, "spurious DMA irq");
 
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index 44f7983df0a1..93665135aff1 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -6,8 +6,6 @@
  * Copyright (C) 2005-2007 by Texas Instruments
  */
 
-#ifndef CONFIG_BLACKFIN
-
 #define MUSB_HSDMA_BASE		0x200
 #define MUSB_HSDMA_INTR		(MUSB_HSDMA_BASE + 0)
 #define MUSB_HSDMA_CONTROL		0x4
@@ -34,68 +32,6 @@
 	musb_writel(mbase, \
 		    MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \
 		    len)
-#else
-
-#define MUSB_HSDMA_BASE		0x400
-#define MUSB_HSDMA_INTR		(MUSB_HSDMA_BASE + 0)
-#define MUSB_HSDMA_CONTROL		0x04
-#define MUSB_HSDMA_ADDR_LOW		0x08
-#define MUSB_HSDMA_ADDR_HIGH		0x0C
-#define MUSB_HSDMA_COUNT_LOW		0x10
-#define MUSB_HSDMA_COUNT_HIGH		0x14
-
-#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset)		\
-		(MUSB_HSDMA_BASE + (_bchannel * 0x20) + _offset)
-
-static inline u32 musb_read_hsdma_addr(void __iomem *mbase, u8 bchannel)
-{
-	u32 addr = musb_readw(mbase,
-		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH));
-
-	addr = addr << 16;
-
-	addr |= musb_readw(mbase,
-		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW));
-
-	return addr;
-}
-
-static inline void musb_write_hsdma_addr(void __iomem *mbase,
-				u8 bchannel, dma_addr_t dma_addr)
-{
-	musb_writew(mbase,
-		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW),
-		dma_addr);
-	musb_writew(mbase,
-		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH),
-		(dma_addr >> 16));
-}
-
-static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel)
-{
-	u32 count = musb_readw(mbase,
-		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH));
-
-	count = count << 16;
-
-	count |= musb_readw(mbase,
-		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW));
-
-	return count;
-}
-
-static inline void musb_write_hsdma_count(void __iomem *mbase,
-				u8 bchannel, u32 len)
-{
-	musb_writew(mbase,
-		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),len);
-	musb_writew(mbase,
-		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH),
-		(len >> 16));
-}
-
-#endif /* CONFIG_BLACKFIN */
-
 /* control register (16-bit): */
 #define MUSB_HSDMA_ENABLE_SHIFT		0
 #define MUSB_HSDMA_TRANSMIT_SHIFT	1