aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/gadget/function/f_uac1_legacy.c2
-rw-r--r--drivers/usb/gadget/function/u_uac1_legacy.c2
-rw-r--r--drivers/usb/gadget/function/u_uac1_legacy.h2
-rw-r--r--drivers/usb/gadget/legacy/audio.c2
-rw-r--r--drivers/usb/host/Kconfig1
-rw-r--r--drivers/usb/host/ehci-hcd.c5
-rw-r--r--drivers/usb/host/ehci-tilegx.c207
-rw-r--r--drivers/usb/host/isp1362.h46
-rw-r--r--drivers/usb/host/ohci-hcd.c18
-rw-r--r--drivers/usb/host/ohci-tilegx.c196
-rw-r--r--drivers/usb/musb/Kconfig14
-rw-r--r--drivers/usb/musb/Makefile1
-rw-r--r--drivers/usb/musb/blackfin.c623
-rw-r--r--drivers/usb/musb/blackfin.h81
-rw-r--r--drivers/usb/musb/musb_core.c7
-rw-r--r--drivers/usb/musb/musb_core.h43
-rw-r--r--drivers/usb/musb/musb_debugfs.c2
-rw-r--r--drivers/usb/musb/musb_dma.h11
-rw-r--r--drivers/usb/musb/musb_gadget.c56
-rw-r--r--drivers/usb/musb/musb_host.c12
-rw-r--r--drivers/usb/musb/musb_regs.h182
-rw-r--r--drivers/usb/musb/musbhsdma.c5
-rw-r--r--drivers/usb/musb/musbhsdma.h64
23 files changed, 15 insertions, 1567 deletions
diff --git a/drivers/usb/gadget/function/f_uac1_legacy.c b/drivers/usb/gadget/function/f_uac1_legacy.c
index 04f4b2862256..24c086bcdeaa 100644
--- a/drivers/usb/gadget/function/f_uac1_legacy.c
+++ b/drivers/usb/gadget/function/f_uac1_legacy.c
@@ -4,8 +4,6 @@
*
* Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
* Copyright (C) 2008 Analog Devices, Inc
- *
- * Enter bugs at http://blackfin.uclinux.org/
*/
#include <linux/slab.h>
diff --git a/drivers/usb/gadget/function/u_uac1_legacy.c b/drivers/usb/gadget/function/u_uac1_legacy.c
index cbc868d117af..5393e5c37a4b 100644
--- a/drivers/usb/gadget/function/u_uac1_legacy.c
+++ b/drivers/usb/gadget/function/u_uac1_legacy.c
@@ -4,8 +4,6 @@
*
* Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
* Copyright (C) 2008 Analog Devices, Inc
- *
- * Enter bugs at http://blackfin.uclinux.org/
*/
#include <linux/kernel.h>
diff --git a/drivers/usb/gadget/function/u_uac1_legacy.h b/drivers/usb/gadget/function/u_uac1_legacy.h
index dd69e408a3d9..5c1bdf46fe32 100644
--- a/drivers/usb/gadget/function/u_uac1_legacy.h
+++ b/drivers/usb/gadget/function/u_uac1_legacy.h
@@ -4,8 +4,6 @@
*
* Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
* Copyright (C) 2008 Analog Devices, Inc
- *
- * Enter bugs at http://blackfin.uclinux.org/
*/
#ifndef __U_UAC1_LEGACY_H
diff --git a/drivers/usb/gadget/legacy/audio.c b/drivers/usb/gadget/legacy/audio.c
index 7b11dce98b94..dd81fd538cb8 100644
--- a/drivers/usb/gadget/legacy/audio.c
+++ b/drivers/usb/gadget/legacy/audio.c
@@ -4,8 +4,6 @@
*
* Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
* Copyright (C) 2008 Analog Devices, Inc
- *
- * Enter bugs at http://blackfin.uclinux.org/
*/
/* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 4fcfb3084b36..b85822f0c874 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -360,6 +360,7 @@ config USB_ISP116X_HCD
config USB_ISP1362_HCD
tristate "ISP1362 HCD support"
depends on HAS_IOMEM
+ depends on COMPILE_TEST # nothing uses this
---help---
Supports the Philips ISP1362 chip as a host controller
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 7f0737449df7..d927adf3afcd 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1275,11 +1275,6 @@ MODULE_LICENSE ("GPL");
#define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver
#endif
-#ifdef CONFIG_TILE_USB
-#include "ehci-tilegx.c"
-#define PLATFORM_DRIVER ehci_hcd_tilegx_driver
-#endif
-
#ifdef CONFIG_USB_EHCI_HCD_PMC_MSP
#include "ehci-pmcmsp.c"
#define PLATFORM_DRIVER ehci_hcd_msp_driver
diff --git a/drivers/usb/host/ehci-tilegx.c b/drivers/usb/host/ehci-tilegx.c
deleted file mode 100644
index 610ed437ed2c..000000000000
--- a/drivers/usb/host/ehci-tilegx.c
+++ /dev/null
@@ -1,207 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2012 Tilera Corporation. All Rights Reserved.
- */
-
-/*
- * Tilera TILE-Gx USB EHCI host controller driver.
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/usb/tilegx.h>
-#include <linux/usb.h>
-
-#include <asm/homecache.h>
-
-#include <gxio/iorpc_usb_host.h>
-#include <gxio/usb_host.h>
-
-static void tilegx_start_ehc(void)
-{
-}
-
-static void tilegx_stop_ehc(void)
-{
-}
-
-static int tilegx_ehci_setup(struct usb_hcd *hcd)
-{
- int ret = ehci_init(hcd);
-
- /*
- * Some drivers do:
- *
- * struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- * ehci->need_io_watchdog = 0;
- *
- * here, but since this is a new driver we're going to leave the
- * watchdog enabled. Later we may try to turn it off and see
- * whether we run into any problems.
- */
-
- return ret;
-}
-
-static const struct hc_driver ehci_tilegx_hc_driver = {
- .description = hcd_name,
- .product_desc = "Tile-Gx EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * Generic hardware linkage.
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
-
- /*
- * Basic lifecycle operations.
- */
- .reset = tilegx_ehci_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * Managing I/O requests and associated device resources.
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * Scheduling support.
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * Root hub support.
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static int ehci_hcd_tilegx_drv_probe(struct platform_device *pdev)
-{
- struct usb_hcd *hcd;
- struct ehci_hcd *ehci;
- struct tilegx_usb_platform_data *pdata = dev_get_platdata(&pdev->dev);
- pte_t pte = { 0 };
- int my_cpu = smp_processor_id();
- int ret;
-
- if (usb_disabled())
- return -ENODEV;
-
- /*
- * Try to initialize our GXIO context; if we can't, the device
- * doesn't exist.
- */
- if (gxio_usb_host_init(&pdata->usb_ctx, pdata->dev_index, 1) != 0)
- return -ENXIO;
-
- hcd = usb_create_hcd(&ehci_tilegx_hc_driver, &pdev->dev,
- dev_name(&pdev->dev));
- if (!hcd) {
- ret = -ENOMEM;
- goto err_hcd;
- }
-
- /*
- * We don't use rsrc_start to map in our registers, but seems like
- * we ought to set it to something, so we use the register VA.
- */
- hcd->rsrc_start =
- (ulong) gxio_usb_host_get_reg_start(&pdata->usb_ctx);
- hcd->rsrc_len = gxio_usb_host_get_reg_len(&pdata->usb_ctx);
- hcd->regs = gxio_usb_host_get_reg_start(&pdata->usb_ctx);
-
- tilegx_start_ehc();
-
- ehci = hcd_to_ehci(hcd);
- ehci->caps = hcd->regs;
- ehci->regs =
- hcd->regs + HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase));
- /* cache this readonly data; minimize chip reads */
- ehci->hcs_params = readl(&ehci->caps->hcs_params);
-
- /* Create our IRQs and register them. */
- pdata->irq = irq_alloc_hwirq(-1);
- if (!pdata->irq) {
- ret = -ENXIO;
- goto err_no_irq;
- }
-
- tile_irq_activate(pdata->irq, TILE_IRQ_PERCPU);
-
- /* Configure interrupts. */
- ret = gxio_usb_host_cfg_interrupt(&pdata->usb_ctx,
- cpu_x(my_cpu), cpu_y(my_cpu),
- KERNEL_PL, pdata->irq);
- if (ret) {
- ret = -ENXIO;
- goto err_have_irq;
- }
-
- /* Register all of our memory. */
- pte = pte_set_home(pte, PAGE_HOME_HASH);
- ret = gxio_usb_host_register_client_memory(&pdata->usb_ctx, pte, 0);
- if (ret) {
- ret = -ENXIO;
- goto err_have_irq;
- }
-
- ret = usb_add_hcd(hcd, pdata->irq, IRQF_SHARED);
- if (ret == 0) {
- platform_set_drvdata(pdev, hcd);
- device_wakeup_enable(hcd->self.controller);
- return ret;
- }
-
-err_have_irq:
- irq_free_hwirq(pdata->irq);
-err_no_irq:
- tilegx_stop_ehc();
- usb_put_hcd(hcd);
-err_hcd:
- gxio_usb_host_destroy(&pdata->usb_ctx);
- return ret;
-}
-
-static int ehci_hcd_tilegx_drv_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
- struct tilegx_usb_platform_data *pdata = dev_get_platdata(&pdev->dev);
-
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
- tilegx_stop_ehc();
- gxio_usb_host_destroy(&pdata->usb_ctx);
- irq_free_hwirq(pdata->irq);
-
- return 0;
-}
-
-static void ehci_hcd_tilegx_drv_shutdown(struct platform_device *pdev)
-{
- usb_hcd_platform_shutdown(pdev);
- ehci_hcd_tilegx_drv_remove(pdev);
-}
-
-static struct platform_driver ehci_hcd_tilegx_driver = {
- .probe = ehci_hcd_tilegx_drv_probe,
- .remove = ehci_hcd_tilegx_drv_remove,
- .shutdown = ehci_hcd_tilegx_drv_shutdown,
- .driver = {
- .name = "tilegx-ehci",
- }
-};
-
-MODULE_ALIAS("platform:tilegx-ehci");
diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h
index da79e36ced89..650240846ee2 100644
--- a/drivers/usb/host/isp1362.h
+++ b/drivers/usb/host/isp1362.h
@@ -6,49 +6,6 @@
*/
/* ------------------------------------------------------------------------- */
-/*
- * Platform specific compile time options
- */
-#if defined(CONFIG_BLACKFIN)
-
-#include <linux/io.h>
-#define USE_32BIT 0
-#define MAX_ROOT_PORTS 2
-#define USE_PLATFORM_DELAY 0
-#define USE_NDELAY 1
-
-#define DUMMY_DELAY_ACCESS \
- do { \
- bfin_read16(ASYNC_BANK0_BASE); \
- bfin_read16(ASYNC_BANK0_BASE); \
- bfin_read16(ASYNC_BANK0_BASE); \
- } while (0)
-
-#undef insw
-#undef outsw
-
-#define insw delayed_insw
-#define outsw delayed_outsw
-
-static inline void delayed_outsw(unsigned int addr, void *buf, int len)
-{
- unsigned short *bp = (unsigned short *)buf;
- while (len--) {
- DUMMY_DELAY_ACCESS;
- outw(*bp++, addr);
- }
-}
-
-static inline void delayed_insw(unsigned int addr, void *buf, int len)
-{
- unsigned short *bp = (unsigned short *)buf;
- while (len--) {
- DUMMY_DELAY_ACCESS;
- *bp++ = inw(addr);
- }
-}
-
-#else
#define MAX_ROOT_PORTS 2
@@ -60,9 +17,6 @@ static inline void delayed_insw(unsigned int addr, void *buf, int len)
#define DUMMY_DELAY_ACCESS do {} while (0)
-#endif
-
-
/* ------------------------------------------------------------------------- */
#define USB_RESET_WIDTH 50
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index d088c340e4d0..4806e0f9e8d4 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1245,11 +1245,6 @@ MODULE_LICENSE ("GPL");
#define TMIO_OHCI_DRIVER ohci_hcd_tmio_driver
#endif
-#ifdef CONFIG_TILE_USB
-#include "ohci-tilegx.c"
-#define PLATFORM_DRIVER ohci_hcd_tilegx_driver
-#endif
-
static int __init ohci_hcd_mod_init(void)
{
int retval = 0;
@@ -1274,12 +1269,6 @@ static int __init ohci_hcd_mod_init(void)
goto error_ps3;
#endif
-#ifdef PLATFORM_DRIVER
- retval = platform_driver_register(&PLATFORM_DRIVER);
- if (retval < 0)
- goto error_platform;
-#endif
-
#ifdef OF_PLATFORM_DRIVER
retval = platform_driver_register(&OF_PLATFORM_DRIVER);
if (retval < 0)
@@ -1323,10 +1312,6 @@ static int __init ohci_hcd_mod_init(void)
platform_driver_unregister(&OF_PLATFORM_DRIVER);
error_of_platform:
#endif
-#ifdef PLATFORM_DRIVER
- platform_driver_unregister(&PLATFORM_DRIVER);
- error_platform:
-#endif
#ifdef PS3_SYSTEM_BUS_DRIVER
ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
error_ps3:
@@ -1354,9 +1339,6 @@ static void __exit ohci_hcd_mod_exit(void)
#ifdef OF_PLATFORM_DRIVER
platform_driver_unregister(&OF_PLATFORM_DRIVER);
#endif
-#ifdef PLATFORM_DRIVER
- platform_driver_unregister(&PLATFORM_DRIVER);
-#endif
#ifdef PS3_SYSTEM_BUS_DRIVER
ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
#endif
diff --git a/drivers/usb/host/ohci-tilegx.c b/drivers/usb/host/ohci-tilegx.c
deleted file mode 100644
index d21ca3ce9a30..000000000000
--- a/drivers/usb/host/ohci-tilegx.c
+++ /dev/null
@@ -1,196 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2012 Tilera Corporation. All Rights Reserved.
- */
-
-/*
- * Tilera TILE-Gx USB OHCI host controller driver.
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/usb/tilegx.h>
-#include <linux/usb.h>
-
-#include <asm/homecache.h>
-
-#include <gxio/iorpc_usb_host.h>
-#include <gxio/usb_host.h>
-
-static void tilegx_start_ohc(void)
-{
-}
-
-static void tilegx_stop_ohc(void)
-{
-}
-
-static int tilegx_ohci_start(struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- int ret;
-
- ret = ohci_init(ohci);
- if (ret < 0)
- return ret;
-
- ret = ohci_run(ohci);
- if (ret < 0) {
- dev_err(hcd->self.controller, "can't start %s\n",
- hcd->self.bus_name);
- ohci_stop(hcd);
- return ret;
- }
-
- return 0;
-}
-
-static const struct hc_driver ohci_tilegx_hc_driver = {
- .description = hcd_name,
- .product_desc = "Tile-Gx OHCI",
- .hcd_priv_size = sizeof(struct ohci_hcd),
-
- /*
- * Generic hardware linkage.
- */
- .irq = ohci_irq,
- .flags = HCD_MEMORY | HCD_LOCAL_MEM | HCD_USB11,
-
- /*
- * Basic lifecycle operations.
- */
- .start = tilegx_ohci_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
-
- /*
- * Managing I/O requests and associated device resources.
- */
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- /*
- * Scheduling support.
- */
- .get_frame_number = ohci_get_frame,
-
- /*
- * Root hub support.
- */
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
- .start_port_reset = ohci_start_port_reset,
-};
-
-static int ohci_hcd_tilegx_drv_probe(struct platform_device *pdev)
-{
- struct usb_hcd *hcd;
- struct tilegx_usb_platform_data *pdata = dev_get_platdata(&pdev->dev);
- pte_t pte = { 0 };
- int my_cpu = smp_processor_id();
- int ret;
-
- if (usb_disabled())
- return -ENODEV;
-
- /*
- * Try to initialize our GXIO context; if we can't, the device
- * doesn't exist.
- */
- if (gxio_usb_host_init(&pdata->usb_ctx, pdata->dev_index, 0) != 0)
- return -ENXIO;
-
- hcd = usb_create_hcd(&ohci_tilegx_hc_driver, &pdev->dev,
- dev_name(&pdev->dev));
- if (!hcd) {
- ret = -ENOMEM;
- goto err_hcd;
- }
-
- /*
- * We don't use rsrc_start to map in our registers, but seems like
- * we ought to set it to something, so we use the register VA.
- */
- hcd->rsrc_start =
- (ulong) gxio_usb_host_get_reg_start(&pdata->usb_ctx);
- hcd->rsrc_len = gxio_usb_host_get_reg_len(&pdata->usb_ctx);
- hcd->regs = gxio_usb_host_get_reg_start(&pdata->usb_ctx);
-
- tilegx_start_ohc();
-
- /* Create our IRQs and register them. */
- pdata->irq = irq_alloc_hwirq(-1);
- if (!pdata->irq) {
- ret = -ENXIO;
- goto err_no_irq;
- }
-
- tile_irq_activate(pdata->irq, TILE_IRQ_PERCPU);
-
- /* Configure interrupts. */
- ret = gxio_usb_host_cfg_interrupt(&pdata->usb_ctx,
- cpu_x(my_cpu), cpu_y(my_cpu),
- KERNEL_PL, pdata->irq);
- if (ret) {
- ret = -ENXIO;
- goto err_have_irq;
- }
-
- /* Register all of our memory. */
- pte = pte_set_home(pte, PAGE_HOME_HASH);
- ret = gxio_usb_host_register_client_memory(&pdata->usb_ctx, pte, 0);
- if (ret) {
- ret = -ENXIO;
- goto err_have_irq;
- }
-
- ohci_hcd_init(hcd_to_ohci(hcd));
-
- ret = usb_add_hcd(hcd, pdata->irq, IRQF_SHARED);
- if (ret == 0) {
- platform_set_drvdata(pdev, hcd);
- device_wakeup_enable(hcd->self.controller);
- return ret;
- }
-
-err_have_irq:
- irq_free_hwirq(pdata->irq);
-err_no_irq:
- tilegx_stop_ohc();
- usb_put_hcd(hcd);
-err_hcd:
- gxio_usb_host_destroy(&pdata->usb_ctx);
- return ret;
-}
-
-static int ohci_hcd_tilegx_drv_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
- struct tilegx_usb_platform_data *pdata = dev_get_platdata(&pdev->dev);
-
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
- tilegx_stop_ohc();
- gxio_usb_host_destroy(&pdata->usb_ctx);
- irq_free_hwirq(pdata->irq);
-
- return 0;
-}
-
-static void ohci_hcd_tilegx_drv_shutdown(struct platform_device *pdev)
-{
- usb_hcd_platform_shutdown(pdev);
- ohci_hcd_tilegx_drv_remove(pdev);
-}
-
-static struct platform_driver ohci_hcd_tilegx_driver = {
- .probe = ohci_hcd_tilegx_drv_probe,
- .remove = ohci_hcd_tilegx_drv_remove,
- .shutdown = ohci_hcd_tilegx_drv_shutdown,
- .driver = {
- .name = "tilegx-ohci",
- }
-};
-
-MODULE_ALIAS("platform:tilegx-ohci");
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 5506a9c03c1f..ad08895e78f9 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -5,7 +5,7 @@
# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
config USB_MUSB_HDRC
- tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, AW, ...)'
+ tristate 'Inventra Highspeed Dual Role Controller'
depends on (USB || USB_GADGET)
depends on HAS_IOMEM
help
@@ -18,9 +18,6 @@ config USB_MUSB_HDRC
Texas Instruments families using this IP include DaVinci
(35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
- Analog Devices parts using this IP include Blackfin BF54x,
- BF525 and BF527.
-
Allwinner SoCs using this IP include A10, A13, A20, ...
If you do not know what this is, please say N.
@@ -87,7 +84,7 @@ config USB_MUSB_DA8XX
config USB_MUSB_TUSB6010
tristate "TUSB6010"
depends on HAS_IOMEM
- depends on (ARCH_OMAP2PLUS || COMPILE_TEST) && !BLACKFIN
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
config USB_MUSB_OMAP2PLUS
@@ -107,11 +104,6 @@ config USB_MUSB_DSPS
depends on ARCH_OMAP2PLUS || COMPILE_TEST
depends on OF_IRQ
-config USB_MUSB_BLACKFIN
- tristate "Blackfin"
- depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
- depends on NOP_USB_XCEIV
-
config USB_MUSB_UX500
tristate "Ux500 platforms"
depends on ARCH_U8500 || COMPILE_TEST
@@ -149,7 +141,7 @@ config USB_UX500_DMA
config USB_INVENTRA_DMA
bool 'Inventra'
- depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
+ depends on USB_MUSB_OMAP2PLUS
help
Enable DMA transfers using Mentor's engine.
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 79d4d5439164..3a88c79e650c 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -21,7 +21,6 @@ obj-$(CONFIG_USB_MUSB_DSPS) += musb_dsps.o
obj-$(CONFIG_USB_MUSB_TUSB6010) += tusb6010.o
obj-$(CONFIG_USB_MUSB_DAVINCI) += davinci.o
obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o
-obj-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o
obj-$(CONFIG_USB_MUSB_UX500) += ux500.o
obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o
obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
deleted file mode 100644
index 0a98dcd66d19..000000000000
--- a/drivers/usb/musb/blackfin.c
+++ /dev/null
@@ -1,623 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * MUSB OTG controller driver for Blackfin Processors
- *
- * Copyright 2006-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/prefetch.h>
-#include <linux/usb/usb_phy_generic.h>
-
-#include <asm/cacheflush.h>
-
-#include "musb_core.h"
-#include "musbhsdma.h"
-#include "blackfin.h"
-
-struct bfin_glue {
- struct device *dev;
- struct platform_device *musb;
- struct platform_device *phy;
-};
-#define glue_to_musb(g) platform_get_drvdata(g->musb)
-
-static u32 bfin_fifo_offset(u8 epnum)
-{
- return USB_OFFSET(USB_EP0_FIFO) + (epnum * 8);
-}
-
-static u8 bfin_readb(const void __iomem *addr, unsigned offset)
-{
- return (u8)(bfin_read16(addr + offset));
-}
-
-static u16 bfin_readw(const void __iomem *addr, unsigned offset)
-{
- return bfin_read16(addr + offset);
-}
-
-static u32 bfin_readl(const void __iomem *addr, unsigned offset)
-{
- return (u32)(bfin_read16(addr + offset));
-}
-
-static void bfin_writeb(void __iomem *addr, unsigned offset, u8 data)
-{
- bfin_write16(addr + offset, (u16)data);
-}
-
-static void bfin_writew(void __iomem *addr, unsigned offset, u16 data)
-{
- bfin_write16(addr + offset, data);
-}
-
-static void bfin_writel(void __iomem *addr, unsigned offset, u32 data)
-{
- bfin_write16(addr + offset, (u16)data);
-}
-
-/*
- * Load an endpoint's FIFO
- */
-static void bfin_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
-{
- struct musb *musb = hw_ep->musb;
- void __iomem *fifo = hw_ep->fifo;
- void __iomem *epio = hw_ep->regs;
- u8 epnum = hw_ep->epnum;
-
- prefetch((u8 *)src);
-
- musb_writew(epio, MUSB_TXCOUNT, len);
-
- dev_dbg(musb->controller, "TX ep%d fifo %p count %d buf %p, epio %p\n",
- hw_ep->epnum, fifo, len, src, epio);
-
- dump_fifo_data(src, len);
-
- if (!ANOMALY_05000380 && epnum != 0) {
- u16 dma_reg;
-
- flush_dcache_range((unsigned long)src,
- (unsigned long)(src + len));
-
- /* Setup DMA address register */
- dma_reg = (u32)src;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
- SSYNC();
-
- dma_reg = (u32)src >> 16;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
- SSYNC();
-
- /* Setup DMA count register */
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
- SSYNC();
-
- /* Enable the DMA */
- dma_reg = (epnum << 4) | DMA_ENA | INT_ENA | DIRECTION;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
- SSYNC();
-
- /* Wait for complete */
- while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
- cpu_relax();
-
- /* acknowledge dma interrupt */
- bfin_write_USB_DMA_INTERRUPT(1 << epnum);
- SSYNC();
-
- /* Reset DMA */
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
- SSYNC();
- } else {
- SSYNC();
-
- if (unlikely((unsigned long)src & 0x01))
- outsw_8((unsigned long)fifo, src, (len + 1) >> 1);
- else
- outsw((unsigned long)fifo, src, (len + 1) >> 1);
- }
-}
-/*
- * Unload an endpoint's FIFO
- */
-static void bfin_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
-{
- struct musb *musb = hw_ep->musb;
- void __iomem *fifo = hw_ep->fifo;
- u8 epnum = hw_ep->epnum;
-
- if (ANOMALY_05000467 && epnum != 0) {
- u16 dma_reg;
-
- invalidate_dcache_range((unsigned long)dst,
- (unsigned long)(dst + len));
-
- /* Setup DMA address register */
- dma_reg = (u32)dst;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
- SSYNC();
-
- dma_reg = (u32)dst >> 16;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
- SSYNC();
-
- /* Setup DMA count register */
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
- SSYNC();
-
- /* Enable the DMA */
- dma_reg = (epnum << 4) | DMA_ENA | INT_ENA;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
- SSYNC();
-
- /* Wait for complete */
- while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
- cpu_relax();
-
- /* acknowledge dma interrupt */
- bfin_write_USB_DMA_INTERRUPT(1 << epnum);
- SSYNC();
-
- /* Reset DMA */
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
- SSYNC();
- } else {
- SSYNC();
- /* Read the last byte of packet with odd size from address fifo + 4
- * to trigger 1 byte access to EP0 FIFO.
- */
- if (len == 1)
- *dst = (u8)inw((unsigned long)fifo + 4);
- else {
- if (unlikely((unsigned long)dst & 0x01))
- insw_8((unsigned long)fifo, dst, len >> 1);
- else
- insw((unsigned long)fifo, dst, len >> 1);
-
- if (len & 0x01)
- *(dst + len - 1) = (u8)inw((unsigned long)fifo + 4);
- }
- }
- dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
- 'R', hw_ep->epnum, fifo, len, dst);
-
- dump_fifo_data(dst, len);
-}
-
-static irqreturn_t blackfin_interrupt(int irq, void *__hci)
-{
- unsigned long flags;
- irqreturn_t retval = IRQ_NONE;
- struct musb *musb = __hci;
-
- spin_lock_irqsave(&musb->lock, flags);
-
- musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
- musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
- musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
-
- if (musb->int_usb || musb->int_tx || musb->int_rx) {
- musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb);
- musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx);
- musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx);
- retval = musb_interrupt(musb);
- }
-
- /* Start sampling ID pin, when plug is removed from MUSB */
- if ((musb->xceiv->otg->state == OTG_STATE_B_IDLE
- || musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON) ||
- (musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) {
- mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY);
- musb->a_wait_bcon = TIMER_DELAY;
- }
-
- spin_unlock_irqrestore(&musb->lock, flags);
-
- return retval;
-}
-
-static void musb_conn_timer_handler(struct timer_list *t)
-{
- struct musb *musb = from_timer(musb, t, dev_timer);
- unsigned long flags;
- u16 val;
- static u8 toggle;
-
- spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv->otg->state) {
- case OTG_STATE_A_IDLE:
- case OTG_STATE_A_WAIT_BCON:
- /* Start a new session */
- val = musb_readw(musb->mregs, MUSB_DEVCTL);
- val &= ~MUSB_DEVCTL_SESSION;
- musb_writew(musb->mregs, MUSB_DEVCTL, val);
- val |= MUSB_DEVCTL_SESSION;
- musb_writew(musb->mregs, MUSB_DEVCTL, val);
- /* Check if musb is host or peripheral. */
- val = musb_readw(musb->mregs, MUSB_DEVCTL);
-
- if (!(val & MUSB_DEVCTL_BDEVICE)) {
- gpio_set_value(musb->config->gpio_vrsel, 1);
- musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
- } else {
- gpio_set_value(musb->config->gpio_vrsel, 0);
- /* Ignore VBUSERROR and SUSPEND IRQ */
- val = musb_readb(musb->mregs, MUSB_INTRUSBE);
- val &= ~MUSB_INTR_VBUSERROR;
- musb_writeb(musb->mregs, MUSB_INTRUSBE, val);
-
- val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
- musb_writeb(musb->mregs, MUSB_INTRUSB, val);
- musb->xceiv->otg->state = OTG_STATE_B_IDLE;
- }
- mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY);
- break;
- case OTG_STATE_B_IDLE:
- /*
- * Start a new session. It seems that MUSB needs taking
- * some time to recognize the type of the plug inserted?
- */
- val = musb_readw(musb->mregs, MUSB_DEVCTL);
- val |= MUSB_DEVCTL_SESSION;
- musb_writew(musb->mregs, MUSB_DEVCTL, val);
- val = musb_readw(musb->mregs, MUSB_DEVCTL);
-
- if (!(val & MUSB_DEVCTL_BDEVICE)) {
- gpio_set_value(musb->config->gpio_vrsel, 1);
- musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
- } else {
- gpio_set_value(musb->config->gpio_vrsel, 0);
-
- /* Ignore VBUSERROR and SUSPEND IRQ */
- val = musb_readb(musb->mregs, MUSB_INTRUSBE);
- val &= ~MUSB_INTR_VBUSERROR;
- musb_writeb(musb->mregs, MUSB_INTRUSBE, val);
-
- val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
- musb_writeb(musb->mregs, MUSB_INTRUSB, val);
-
- /* Toggle the Soft Conn bit, so that we can response to
- * the inserting of either A-plug or B-plug.
- */
- if (toggle) {
- val = musb_readb(musb->mregs, MUSB_POWER);
- val &= ~MUSB_POWER_SOFTCONN;
- musb_writeb(musb->mregs, MUSB_POWER, val);
- toggle = 0;
- } else {
- val = musb_readb(musb->mregs, MUSB_POWER);
- val |= MUSB_POWER_SOFTCONN;
- musb_writeb(musb->mregs, MUSB_POWER, val);
- toggle = 1;
- }
- /* The delay time is set to 1/4 second by default,
- * shortening it, if accelerating A-plug detection
- * is needed in OTG mode.
- */
- mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY / 4);
- }
- break;
- default:
- dev_dbg(musb->controller, "%s state not handled\n",
- usb_otg_state_string(musb->xceiv->otg->state));
- break;
- }
- spin_unlock_irqrestore(&musb->lock, flags);
-
- dev_dbg(musb->controller, "state is %s\n",
- usb_otg_state_string(musb->xceiv->otg->state));
-}
-
-static void bfin_musb_enable(struct musb *musb)
-{
- /* REVISIT is this really correct ? */
-}
-
-static void bfin_musb_disable(struct musb *musb)
-{
-}
-
-static void bfin_musb_set_vbus(struct musb *musb, int is_on)
-{
- int value = musb->config->gpio_vrsel_active;
- if (!is_on)
- value = !value;
- gpio_set_value(musb->config->gpio_vrsel, value);
-
- dev_dbg(musb->controller, "VBUS %s, devctl %02x "
- /* otg %3x conf %08x prcm %08x */ "\n",
- usb_otg_state_string(musb->xceiv->otg->state),
- musb_readb(musb->mregs, MUSB_DEVCTL));
-}
-
-static int bfin_musb_set_power(struct usb_phy *x, unsigned mA)
-{
- return 0;
-}
-
-static int bfin_musb_vbus_status(struct musb *musb)
-{
- return 0;
-}
-
-static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode)
-{
- return -EIO;
-}
-
-static int bfin_musb_adjust_channel_params(struct dma_channel *channel,
- u16 packet_sz, u8 *mode,
- dma_addr_t *dma_addr, u32 *len)
-{
- struct musb_dma_channel *musb_channel = channel->private_data;
-
- /*
- * Anomaly 05000450 might cause data corruption when using DMA
- * MODE 1 transmits with short packet. So to work around this,
- * we truncate all MODE 1 transfers down to a multiple of the
- * max packet size, and then do the last short packet transfer
- * (if there is any) using MODE 0.
- */
- if (ANOMALY_05000450) {
- if (musb_channel->transmit && *mode == 1)
- *len = *len - (*len % packet_sz);
- }
-
- return 0;
-}
-
-static void bfin_musb_reg_init(struct musb *musb)
-{
- if (ANOMALY_05000346) {
- bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
- SSYNC();
- }
-
- if (ANOMALY_05000347) {
- bfin_write_USB_APHY_CNTRL(0x0);
- SSYNC();
- }
-
- /* Configure PLL oscillator register */
- bfin_write_USB_PLLOSC_CTRL(0x3080 |
- ((480/musb->config->clkin) << 1));
- SSYNC();
-
- bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1);
- SSYNC();
-
- bfin_write_USB_EP_NI0_RXMAXP(64);
- SSYNC();
-
- bfin_write_USB_EP_NI0_TXMAXP(64);
- SSYNC();
-
- /* Route INTRUSB/INTR_RX/INTR_TX to USB_INT0*/
- bfin_write_USB_GLOBINTR(0x7);
- SSYNC();
-
- bfin_write_USB_GLOBAL_CTL(GLOBAL_ENA | EP1_TX_ENA | EP2_TX_ENA |
- EP3_TX_ENA | EP4_TX_ENA | EP5_TX_ENA |
- EP6_TX_ENA | EP7_TX_ENA | EP1_RX_ENA |
- EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
- EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
- SSYNC();
-}
-
-static int bfin_musb_init(struct musb *musb)
-{
-
- /*
- * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
- * and OTG HOST modes, while rev 1.1 and greater require PE7 to
- * be low for DEVICE mode and high for HOST mode. We set it high
- * here because we are in host mode
- */
-
- if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
- printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d\n",
- musb->config->gpio_vrsel);
- return -ENODEV;
- }
- gpio_direction_output(musb->config->gpio_vrsel, 0);
-
- musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
- if (IS_ERR_OR_NULL(musb->xceiv)) {
- gpio_free(musb->config->gpio_vrsel);
- return -EPROBE_DEFER;
- }
-
- bfin_musb_reg_init(musb);
-
- timer_setup(&musb->dev_timer, musb_conn_timer_handler, 0);
-
- musb->xceiv->set_power = bfin_musb_set_power;
-
- musb->isr = blackfin_interrupt;
- musb->double_buffer_not_ok = true;
-
- return 0;
-}
-
-static int bfin_musb_exit(struct musb *musb)
-{
- gpio_free(musb->config->gpio_vrsel);
- usb_put_phy(musb->xceiv);
-
- return 0;
-}
-
-static const struct musb_platform_ops bfin_ops = {
- .quirks = MUSB_DMA_INVENTRA,
- .init = bfin_musb_init,
- .exit = bfin_musb_exit,
-
- .fifo_offset = bfin_fifo_offset,
- .readb = bfin_readb,
- .writeb = bfin_writeb,
- .readw = bfin_readw,
- .writew = bfin_writew,
- .readl = bfin_readl,
- .writel = bfin_writel,
- .fifo_mode = 2,
- .read_fifo = bfin_read_fifo,
- .write_fifo = bfin_write_fifo,
-#ifdef CONFIG_USB_INVENTRA_DMA
- .dma_init = musbhs_dma_controller_create,
- .dma_exit = musbhs_dma_controller_destroy,
-#endif
- .enable = bfin_musb_enable,
- .disable = bfin_musb_disable,
-
- .set_mode = bfin_musb_set_mode,
-
- .vbus_status = bfin_musb_vbus_status,
- .set_vbus = bfin_musb_set_vbus,
-
- .adjust_channel_params = bfin_musb_adjust_channel_params,
-};
-
-static u64 bfin_dmamask = DMA_BIT_MASK(32);
-
-static int bfin_probe(struct platform_device *pdev)
-{
- struct resource musb_resources[2];
- struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct platform_device *musb;
- struct bfin_glue *glue;
-
- int ret = -ENOMEM;
-
- glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
- if (!glue)
- goto err0;
-
- musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
- if (!musb)
- goto err0;
-
- musb->dev.parent = &pdev->dev;
- musb->dev.dma_mask = &bfin_dmamask;
- musb->dev.coherent_dma_mask = bfin_dmamask;
-
- glue->dev = &pdev->dev;
- glue->musb = musb;
-
- pdata->platform_ops = &bfin_ops;
-
- glue->phy = usb_phy_generic_register();
- if (IS_ERR(glue->phy))
- goto err1;
- platform_set_drvdata(pdev, glue);
-
- memset(musb_resources, 0x00, sizeof(*musb_resources) *
- ARRAY_SIZE(musb_resources));
-
- musb_resources[0].name = pdev->resource[0].name;
- musb_resources[0].start = pdev->resource[0].start;
- musb_resources[0].end = pdev->resource[0].end;
- musb_resources[0].flags = pdev->resource[0].flags;
-
- musb_resources[1].name = pdev->resource[1].name;
- musb_resources[1].start = pdev->resource[1].start;
- musb_resources[1].end = pdev->resource[1].end;
- musb_resources[1].flags = pdev->resource[1].flags;
-
- ret = platform_device_add_resources(musb, musb_resources,
- ARRAY_SIZE(musb_resources));
- if (ret) {
- dev_err(&pdev->dev, "failed to add resources\n");
- goto err2;
- }
-
- ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
- if (ret) {
- dev_err(&pdev->dev, "failed to add platform_data\n");
- goto err2;
- }
-
- ret = platform_device_add(musb);
- if (ret) {
- dev_err(&pdev->dev, "failed to register musb device\n");
- goto err2;
- }
-
- return 0;
-
-err2:
- usb_phy_generic_unregister(glue->phy);
-
-err1:
- platform_device_put(musb);
-
-err0:
- return ret;
-}
-
-static int bfin_remove(struct platform_device *pdev)
-{
- struct bfin_glue *glue = platform_get_drvdata(pdev);
-
- platform_device_unregister(glue->musb);
- usb_phy_generic_unregister(glue->phy);
-
- return 0;
-}
-
-static int __maybe_unused bfin_suspend(struct device *dev)
-{
- struct bfin_glue *glue = dev_get_drvdata(dev);
- struct musb *musb = glue_to_musb(glue);
-
- if (is_host_active(musb))
- /*
- * During hibernate gpio_vrsel will change from high to low
- * low which will generate wakeup event resume the system
- * immediately. Set it to 0 before hibernate to avoid this
- * wakeup event.
- */
- gpio_set_value(musb->config->gpio_vrsel, 0);
-
- return 0;
-}
-
-static int __maybe_unused bfin_resume(struct device *dev)
-{
- struct bfin_glue *glue = dev_get_drvdata(dev);
- struct musb *musb = glue_to_musb(glue);
-
- bfin_musb_reg_init(musb);
-
- return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(bfin_pm_ops, bfin_suspend, bfin_resume);
-
-static struct platform_driver bfin_driver = {
- .probe = bfin_probe,
- .remove = bfin_remove,
- .driver = {
- .name = "musb-blackfin",
- .pm = &bfin_pm_ops,
- },
-};
-
-MODULE_DESCRIPTION("Blackfin MUSB Glue Layer");
-MODULE_AUTHOR("Bryan Wy <cooloney@kernel.org>");
-MODULE_LICENSE("GPL v2");
-module_platform_driver(bfin_driver);
diff --git a/drivers/usb/musb/blackfin.h b/drivers/usb/musb/blackfin.h
deleted file mode 100644
index 5b149915b0f8..000000000000
--- a/drivers/usb/musb/blackfin.h
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2007 by Analog Devices, Inc.
- */
-
-#ifndef __MUSB_BLACKFIN_H__
-#define __MUSB_BLACKFIN_H__
-
-/*
- * Blackfin specific definitions
- */
-
-/* Anomalies notes:
- *
- * 05000450 - USB DMA Mode 1 Short Packet Data Corruption:
- * MUSB driver is designed to transfer buffer of N * maxpacket size
- * in DMA mode 1 and leave the rest of the data to the next
- * transfer in DMA mode 0, so we never transmit a short packet in
- * DMA mode 1.
- *
- * 05000463 - This anomaly doesn't affect this driver since it
- * never uses L1 or L2 memory as data destination.
- *
- * 05000464 - This anomaly doesn't affect this driver since it
- * never uses L1 or L2 memory as data source.
- *
- * 05000465 - The anomaly can be seen when SCLK is over 100 MHz, and there is
- * no way to workaround for bulk endpoints. Since the wMaxPackSize
- * of bulk is less than or equal to 512, while the fifo size of
- * endpoint 5, 6, 7 is 1024, the double buffer mode is enabled
- * automatically when these endpoints are used for bulk OUT.
- *
- * 05000466 - This anomaly doesn't affect this driver since it never mixes
- * concurrent DMA and core accesses to the TX endpoint FIFOs.
- *
- * 05000467 - The workaround for this anomaly will introduce another
- * anomaly - 05000465.
- */
-
-/* The Mentor USB DMA engine on BF52x (silicon v0.0 and v0.1) seems to be
- * unstable in host mode. This may be caused by Anomaly 05000380. After
- * digging out the root cause, we will change this number accordingly.
- * So, need to either use silicon v0.2+ or disable DMA mode in MUSB.
- */
-#if ANOMALY_05000380 && defined(CONFIG_BF52x) && \
- !defined(CONFIG_MUSB_PIO_ONLY)
-# error "Please use PIO mode in MUSB driver on bf52x chip v0.0 and v0.1"
-#endif
-
-#undef DUMP_FIFO_DATA
-#ifdef DUMP_FIFO_DATA
-static void dump_fifo_data(u8 *buf, u16 len)
-{
- u8 *tmp = buf;
- int i;
-
- for (i = 0; i < len; i++) {
- if (!(i % 16) && i)
- pr_debug("\n");
- pr_debug("%02x ", *tmp++);
- }
- pr_debug("\n");
-}
-#else
-#define dump_fifo_data(buf, len) do {} while (0)
-#endif
-
-
-#define USB_DMA_BASE USB_DMA_INTERRUPT
-#define USB_DMAx_CTRL 0x04
-#define USB_DMAx_ADDR_LOW 0x08
-#define USB_DMAx_ADDR_HIGH 0x0C
-#define USB_DMAx_COUNT_LOW 0x10
-#define USB_DMAx_COUNT_HIGH 0x14
-
-#define USB_DMA_REG(ep, reg) (USB_DMA_BASE + 0x20 * ep + reg)
-
-/* Almost 1 second */
-#define TIMER_DELAY (1 * HZ)
-
-#endif /* __MUSB_BLACKFIN_H__ */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 4d723077be2b..fb5e4523dc28 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -126,7 +126,6 @@ EXPORT_SYMBOL_GPL(musb_get_mode);
/*-------------------------------------------------------------------------*/
-#ifndef CONFIG_BLACKFIN
static int musb_ulpi_read(struct usb_phy *phy, u32 reg)
{
void __iomem *addr = phy->io_priv;
@@ -208,10 +207,6 @@ out:
return ret;
}
-#else
-#define musb_ulpi_read NULL
-#define musb_ulpi_write NULL
-#endif
static struct usb_phy_io_ops musb_ulpi_access = {
.read = musb_ulpi_read,
@@ -2173,7 +2168,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
* - initializes musb->xceiv, usually by otg_get_phy()
* - stops powering VBUS
*
- * There are various transceiver configurations. Blackfin,
+ * There are various transceiver configurations.
* DaVinci, TUSB60x0, and others integrate them. OMAP3 uses
* external/discrete ones in various flavors (twl4030 family,
* isp1504, non-OTG, etc) mostly hooking up through ULPI.
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 385841ee6f46..8a74cb2907f8 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -414,19 +414,6 @@ struct musb {
struct usb_gadget_driver *gadget_driver; /* its driver */
struct usb_hcd *hcd; /* the usb hcd */
- /*
- * FIXME: Remove this flag.
- *
- * This is only added to allow Blackfin to work
- * with current driver. For some unknown reason
- * Blackfin doesn't work with double buffering
- * and that's enabled by default.
- *
- * We added this flag to forcefully disable double
- * buffering until we get it working.
- */
- unsigned double_buffer_not_ok:1;
-
const struct musb_hdrc_config *config;
int xceiv_old_state;
@@ -467,34 +454,6 @@ static inline char *musb_ep_xfertype_string(u8 type)
return s;
}
-#ifdef CONFIG_BLACKFIN
-static inline int musb_read_fifosize(struct musb *musb,
- struct musb_hw_ep *hw_ep, u8 epnum)
-{
- musb->nr_endpoints++;
- musb->epmask |= (1 << epnum);
-
- if (epnum < 5) {
- hw_ep->max_packet_sz_tx = 128;
- hw_ep->max_packet_sz_rx = 128;
- } else {
- hw_ep->max_packet_sz_tx = 1024;
- hw_ep->max_packet_sz_rx = 1024;
- }
- hw_ep->is_shared_fifo = false;
-
- return 0;
-}
-
-static inline void musb_configure_ep0(struct musb *musb)
-{
- musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
- musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
- musb->endpoints[0].is_shared_fifo = true;
-}
-
-#else
-
static inline int musb_read_fifosize(struct musb *musb,
struct musb_hw_ep *hw_ep, u8 epnum)
{
@@ -531,8 +490,6 @@ static inline void musb_configure_ep0(struct musb *musb)
musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
musb->endpoints[0].is_shared_fifo = true;
}
-#endif /* CONFIG_BLACKFIN */
-
/***************************** Glue it together *****************************/
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 7cf5a1bbdaff..7dac456f7ebc 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -70,7 +70,6 @@ static const struct musb_register_map musb_regmap[] = {
{ "DMA_CNTLch7", 0x274, 16 },
{ "DMA_ADDRch7", 0x278, 32 },
{ "DMA_COUNTch7", 0x27C, 32 },
-#ifndef CONFIG_BLACKFIN
{ "ConfigData", MUSB_CONFIGDATA,8 },
{ "BabbleCtl", MUSB_BABBLE_CTL,8 },
{ "TxFIFOsz", MUSB_TXFIFOSZ, 8 },
@@ -79,7 +78,6 @@ static const struct musb_register_map musb_regmap[] = {
{ "RxFIFOadd", MUSB_RXFIFOADD, 16 },
{ "EPInfo", MUSB_EPINFO, 8 },
{ "RAMInfo", MUSB_RAMINFO, 8 },
-#endif
{ } /* Terminating Entry */
};
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index a4241f4d430e..0fc8cd0c2a5c 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h
@@ -80,17 +80,6 @@ struct musb_hw_ep;
#define is_cppi_enabled(musb) 0
#endif
-/* Anomaly 05000456 - USB Receive Interrupt Is Not Generated in DMA Mode 1
- * Only allow DMA mode 1 to be used when the USB will actually generate the
- * interrupts we expect.
- */
-#ifdef CONFIG_BLACKFIN
-# undef USE_MODE1
-# if !ANOMALY_05000456
-# define USE_MODE1
-# endif
-#endif
-
/*
* DMA channel status ... updated by the dma controller driver whenever that
* status changes, and protected by the overall controller spinlock.
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 293e5b8da565..e564695c6c8d 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -995,15 +995,11 @@ static int musb_gadget_enable(struct usb_ep *ep,
/* Set TXMAXP with the FIFO size of the endpoint
* to disable double buffering mode.
*/
- if (musb->double_buffer_not_ok) {
- musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
- } else {
- if (can_bulk_split(musb, musb_ep->type))
- musb_ep->hb_mult = (hw_ep->max_packet_sz_tx /
- musb_ep->packet_sz) - 1;
- musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
- | (musb_ep->hb_mult << 11));
- }
+ if (can_bulk_split(musb, musb_ep->type))
+ musb_ep->hb_mult = (hw_ep->max_packet_sz_tx /
+ musb_ep->packet_sz) - 1;
+ musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
+ | (musb_ep->hb_mult << 11));
csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
if (musb_readw(regs, MUSB_TXCSR)
@@ -1038,11 +1034,8 @@ static int musb_gadget_enable(struct usb_ep *ep,
/* Set RXMAXP with the FIFO size of the endpoint
* to disable double buffering mode.
*/
- if (musb->double_buffer_not_ok)
- musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx);
- else
- musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
- | (musb_ep->hb_mult << 11));
+ musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
+ | (musb_ep->hb_mult << 11));
/* force shared fifo to OUT-only mode */
if (hw_ep->is_shared_fifo) {
@@ -1680,40 +1673,6 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
return 0;
}
-#ifdef CONFIG_BLACKFIN
-static struct usb_ep *musb_match_ep(struct usb_gadget *g,
- struct usb_endpoint_descriptor *desc,
- struct usb_ss_ep_comp_descriptor *ep_comp)
-{
- struct usb_ep *ep = NULL;
-
- switch (usb_endpoint_type(desc)) {
- case USB_ENDPOINT_XFER_ISOC:
- case USB_ENDPOINT_XFER_BULK:
- if (usb_endpoint_dir_in(desc))
- ep = gadget_find_ep_by_name(g, "ep5in");
- else
- ep = gadget_find_ep_by_name(g, "ep6out");
- break;
- case USB_ENDPOINT_XFER_INT:
- if (usb_endpoint_dir_in(desc))
- ep = gadget_find_ep_by_name(g, "ep1in");
- else
- ep = gadget_find_ep_by_name(g, "ep2out");
- break;
- default:
- break;
- }
-
- if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
- return ep;
-
- return NULL;
-}
-#else
-#define musb_match_ep NULL
-#endif
-
static int musb_gadget_start(struct usb_gadget *g,
struct usb_gadget_driver *driver);
static int musb_gadget_stop(struct usb_gadget *g);
@@ -1727,7 +1686,6 @@ static const struct usb_gadget_ops musb_gadget_operations = {
.pullup = musb_gadget_pullup,
.udc_start = musb_gadget_start,
.udc_stop = musb_gadget_stop,
- .match_ep = musb_match_ep,
};
/* ----------------------------------------------------------------------- */
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 45ed32c2cba9..3a8451a15f7f 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -574,11 +574,8 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum)
/* Set RXMAXP with the FIFO size of the endpoint
* to disable double buffer mode.
*/
- if (musb->double_buffer_not_ok)
- musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx);
- else
- musb_writew(ep->regs, MUSB_RXMAXP,
- qh->maxpacket | ((qh->hb_mult - 1) << 11));
+ musb_writew(ep->regs, MUSB_RXMAXP,
+ qh->maxpacket | ((qh->hb_mult - 1) << 11));
ep->rx_reinit = 0;
}
@@ -804,10 +801,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
/* protocol/endpoint/interval/NAKlimit */
if (epnum) {
musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
- if (musb->double_buffer_not_ok) {
- musb_writew(epio, MUSB_TXMAXP,
- hw_ep->max_packet_sz_tx);
- } else if (can_bulk_split(musb, qh->type)) {
+ if (can_bulk_split(musb, qh->type)) {
qh->hb_mult = hw_ep->max_packet_sz_tx
/ packet_sz;
musb_writew(epio, MUSB_TXMAXP, packet_sz
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index a4beba184798..88466622c89f 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -195,8 +195,6 @@
#define MUSB_HUBADDR_MULTI_TT 0x80
-#ifndef CONFIG_BLACKFIN
-
/*
* Common USB registers
*/
@@ -416,184 +414,4 @@ static inline u8 musb_read_txhubport(struct musb *musb, u8 epnum)
musb->io.busctl_offset(epnum, MUSB_TXHUBPORT));
}
-#else /* CONFIG_BLACKFIN */
-
-#define USB_BASE USB_FADDR
-#define USB_OFFSET(reg) (reg - USB_BASE)
-
-/*
- * Common USB registers
- */
-#define MUSB_FADDR USB_OFFSET(USB_FADDR) /* 8-bit */
-#define MUSB_POWER USB_OFFSET(USB_POWER) /* 8-bit */
-#define MUSB_INTRTX USB_OFFSET(USB_INTRTX) /* 16-bit */
-#define MUSB_INTRRX USB_OFFSET(USB_INTRRX)
-#define MUSB_INTRTXE USB_OFFSET(USB_INTRTXE)
-#define MUSB_INTRRXE USB_OFFSET(USB_INTRRXE)
-#define MUSB_INTRUSB USB_OFFSET(USB_INTRUSB) /* 8 bit */
-#define MUSB_INTRUSBE USB_OFFSET(USB_INTRUSBE)/* 8 bit */
-#define MUSB_FRAME USB_OFFSET(USB_FRAME)
-#define MUSB_INDEX USB_OFFSET(USB_INDEX) /* 8 bit */
-#define MUSB_TESTMODE USB_OFFSET(USB_TESTMODE)/* 8 bit */
-
-/*
- * Additional Control Registers
- */
-
-#define MUSB_DEVCTL USB_OFFSET(USB_OTG_DEV_CTL) /* 8 bit */
-
-#define MUSB_LINKINFO USB_OFFSET(USB_LINKINFO)/* 8 bit */
-#define MUSB_VPLEN USB_OFFSET(USB_VPLEN) /* 8 bit */
-#define MUSB_HS_EOF1 USB_OFFSET(USB_HS_EOF1) /* 8 bit */
-#define MUSB_FS_EOF1 USB_OFFSET(USB_FS_EOF1) /* 8 bit */
-#define MUSB_LS_EOF1 USB_OFFSET(USB_LS_EOF1) /* 8 bit */
-
-/* Offsets to endpoint registers */
-#define MUSB_TXMAXP 0x00
-#define MUSB_TXCSR 0x04
-#define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
-#define MUSB_RXMAXP 0x08
-#define MUSB_RXCSR 0x0C
-#define MUSB_RXCOUNT 0x10
-#define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
-#define MUSB_TXTYPE 0x14
-#define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
-#define MUSB_TXINTERVAL 0x18
-#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
-#define MUSB_RXTYPE 0x1C
-#define MUSB_RXINTERVAL 0x20
-#define MUSB_TXCOUNT 0x28
-
-/* Offsets to endpoint registers in indexed model (using INDEX register) */
-#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
- (0x40 + (_offset))
-
-/* Offsets to endpoint registers in flat models */
-#define MUSB_FLAT_OFFSET(_epnum, _offset) \
- (USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
-
-/* Not implemented - HW has separate Tx/Rx FIFO */
-#define MUSB_TXCSR_MODE 0x0000
-
-static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
-{
-}
-
-static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
-{
-}
-
-static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
-{
-}
-
-static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
-{
-}
-
-static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
-{
-}
-
-static inline u8 musb_read_txfifosz(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u16 musb_read_txfifoadd(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u8 musb_read_rxfifosz(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u8 musb_read_configdata(void __iomem *mbase)
-{
- return 0;
-}
-
-static inline u16 musb_read_hwvers(void __iomem *mbase)
-{
- /*
- * This register is invisible on Blackfin, actually the MUSB
- * RTL version of Blackfin is 1.9, so just hardcode its value.
- */
- return MUSB_HWVERS_1900;
-}
-
-static inline void musb_write_rxfunaddr(void __iomem *mbase, u8 epnum,
- u8 qh_addr_req)
-{
-}
-
-static inline void musb_write_rxhubaddr(void __iomem *mbase, u8 epnum,
- u8 qh_h_addr_reg)
-{
-}
-
-static inline void musb_write_rxhubport(void __iomem *mbase, u8 epnum,
- u8 qh_h_port_reg)
-{
-}
-
-static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
- u8 qh_addr_reg)
-{
-}
-
-static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
- u8 qh_addr_reg)
-{
-}
-
-static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum,
- u8 qh_h_port_reg)
-{
-}
-
-static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
-{
- return 0;
-}
-
-#endif /* CONFIG_BLACKFIN */
-
#endif /* __MUSB_REGS_H__ */
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 21fb9e6622f3..4389fc3422bd 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -235,11 +235,6 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
-#ifdef CONFIG_BLACKFIN
- /* Clear DMA interrupt flags */
- musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma);
-#endif
-
if (!int_hsdma) {
musb_dbg(musb, "spurious DMA irq");
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index 44f7983df0a1..93665135aff1 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -6,8 +6,6 @@
* Copyright (C) 2005-2007 by Texas Instruments
*/
-#ifndef CONFIG_BLACKFIN
-
#define MUSB_HSDMA_BASE 0x200
#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
#define MUSB_HSDMA_CONTROL 0x4
@@ -34,68 +32,6 @@
musb_writel(mbase, \
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \
len)
-#else
-
-#define MUSB_HSDMA_BASE 0x400
-#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
-#define MUSB_HSDMA_CONTROL 0x04
-#define MUSB_HSDMA_ADDR_LOW 0x08
-#define MUSB_HSDMA_ADDR_HIGH 0x0C
-#define MUSB_HSDMA_COUNT_LOW 0x10
-#define MUSB_HSDMA_COUNT_HIGH 0x14
-
-#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \
- (MUSB_HSDMA_BASE + (_bchannel * 0x20) + _offset)
-
-static inline u32 musb_read_hsdma_addr(void __iomem *mbase, u8 bchannel)
-{
- u32 addr = musb_readw(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH));
-
- addr = addr << 16;
-
- addr |= musb_readw(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW));
-
- return addr;
-}
-
-static inline void musb_write_hsdma_addr(void __iomem *mbase,
- u8 bchannel, dma_addr_t dma_addr)
-{
- musb_writew(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW),
- dma_addr);
- musb_writew(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH),
- (dma_addr >> 16));
-}
-
-static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel)
-{
- u32 count = musb_readw(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH));
-
- count = count << 16;
-
- count |= musb_readw(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW));
-
- return count;
-}
-
-static inline void musb_write_hsdma_count(void __iomem *mbase,
- u8 bchannel, u32 len)
-{
- musb_writew(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),len);
- musb_writew(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH),
- (len >> 16));
-}
-
-#endif /* CONFIG_BLACKFIN */
-
/* control register (16-bit): */
#define MUSB_HSDMA_ENABLE_SHIFT 0
#define MUSB_HSDMA_TRANSMIT_SHIFT 1
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.