aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/arch/arm/boot/dts/Makefile (follow)
AgeCommit message (Collapse)AuthorFilesLines
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring1-1717/+40
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-21ARM: dts: Add .dts files missing from the buildRob Herring1-0/+8
Comparing .dts files to built .dtb files yielded a few .dts files which are never built. Add them to the build. Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-20Merge tag 'arm-soc/for-6.5/devicetree' of https://github.com/Broadcom/stblinux into soc/dtArnd Bergmann1-0/+18
This pull request contains Broadcom ARM-based SoCs Device Tree changes for 6.5, please pull the following: - Krzysztof adds missing cache properties for the BCM63xx DSL routers - Rafal relicenses a number of the BCM5301X DTS files to the GPL 2.0+ / MIT license, and he fixes a number of Device Tree nodes warnings, adds MAC address for all Luxul routers and adds Netgear R8000 Wi-Fi regulatory information to the DTS - Stanislav updates the "BCM mobile" SoCs DTS files to fix various warnings - Aurelien enables the BCM283x DTS files to be built with relocation information to make them usable with DT overlays - Christian fixes the Meraki DTS to have correct NAND ECC properties, correct partition numbers and fixed-link node(s) properties * tag 'arm-soc/for-6.5/devicetree' of https://github.com/Broadcom/stblinux: (33 commits) ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappings dt-bindings: net: wireless: brcm,bcm4329-fmac: allow generic properties dt-bindings: net: wireless: brcm,bcm4329-fmac: add BCM4366 binding ARM: dts: BCM5301X: fix duplex-full => full-duplex ARM: dts: BCM5301X: MR32: remove partition index numbers ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo property dt-bindings: power: reset: bcm21664-resetmgr: convert to YAML ARM: dts: bcm21664-garnet: use node labels ARM: dts: bcm11351/21664: add UART, I2C node labels ARM: dts: bcm-mobile: move status properties to the end of nodes ARM: dts: bcm21664/23550: use CCU compatibles directly ARM: dts: bcm-mobile: change "" includes to <> where applicable ARM: dts: BCM5301X: Describe switch ports in the main DTS ARM: dts: BCM5301X: Relicense Christian's code to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32 keys ARM: dts: BCM5301X: Drop invalid #usb-cells dt-bindings: arm: bcm: Add bindings for Buffalo WZR-1166DHP(2) ARM: dts: BCM5301X: Use updated "spi-gpio" binding properties ... Link: https://lore.kernel.org/r/20230619134920.3384844-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20arm: dts: Enable device-tree overlay support for AT91 boardsCristian Birsan1-0/+14
Add the '-@' DTC option for AT91 boards that have device-tree overlays. This option populates the '__symbols__' node that contains all the necessary symbols for supporting device-tree overlays (from bootloader) on these devices. This change increases the size of the resulting DTB with ~30%-40%. Below are the measurements performed v6.4-rc6: at91-sam9x60_curiosity.dtb 28499 -> 36641 bytes at91-sam9x60ek.dtb 30867 -> 39609 bytes at91-sama5d27_som1_ek.dtb 26086 -> 34166 bytes at91-sama5d27_wlsom1_ek.dtb 26045 -> 33184 bytes at91-sama5d2_icp.dtb 27521 -> 36155 bytes at91-sama5d2_ptc_ek.dtb 23237 -> 29612 bytes at91-sama5d2_xplained.dtb 27262 -> 35326 bytes at91-sama5d3_eds.dtb 27924 -> 39939 bytes at91-sama5d3_xplained.dtb 28400 -> 40650 bytes at91-sama5d4_xplained.dtb 26456 -> 36107 bytes at91-sama7g5ek.dtb 29212 -> 37289 bytes Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Link: https://lore.kernel.org/r/20230616152932.1484154-1-cristian.birsan@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'mvebu-dt-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dtArnd Bergmann1-0/+1
mvebu dt for 6.5 (part 1) Add Endian 4i Edge 200 board (kirkwood based) Add missing phy-modes on Armada 388 clearfog board Replace deprecated spi-gpio properties on Armada XP Align MTD partition nodes to dtschema for all mvebu boards * tag 'mvebu-dt-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: mvebu: align MTD partition nodes to dtschema ARM: dts: armada-xp: Replace deprecated spi-gpio properties ARM: dts: armada388-clearfog: add missing phy-modes ARM: dts: kirkwood: Add Endian 4i Edge 200 board Link: https://lore.kernel.org/r/87a5wzh8b1.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'qcom-dts-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dtArnd Bergmann1-0/+1
More Qualcomm ARM32 DeviceTree updates for v6.5 On MSM8960, support for USB is added and the Samsung Galaxy Express is added. GPIO keys and on-board LEDs are described for the APQ8074 Dragonboard. On MSM8226, QFPROM, tsens and thermal zones are defined, and the description of the clock hierarchy is improved. The PCIe endpoint controller on SDX55 gains a interconnect path to DDR defined. Sony Xperia X2 Tablet and Samsung Galaxy Tab 4 are updated following changes in the LP855X DeviceTree binding. * tag 'qcom-dts-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm: dts: qcom: sdx55: Add interconnect path ARM: dts: qcom: msm8226: Add thermal zones node ARM: dts: qcom: msm8226: Add tsens node and related nvmem cells ARM: dts: qcom: msm8226: Add qfprom node ARM: dts: qcom: pm8941: Add thermal zone config ARM: dts: qcom: pm8841: Add thermal zone config ARM: dts: qcom: pm8226: Add thermal sensor and thermal zone config ARM: dts: qcom: msm8974: rename labels for DSI nodes ARM: dts: qcom: apq8074-dragonboard: add gpio keys ARM: dts: qcom: apq8074-dragonboard: add onboard leds ARM: dts: qcom: Add Samsung Galaxy Express support ARM: dts: qcom: msm8960: Add USB node ARM: dts: qcom: adapt to LP855X bindings changes ARM: dts: qcom: msm8226: Provide clocks to mmcc node ARM: dts: qcom: msm8226: Use XO from rpmcc where possible Link: https://lore.kernel.org/r/20230615163926.1462225-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dtArnd Bergmann1-0/+1
i.MX ARM device tree for 6.5: - New board support: Marantec Maveo Box. - Add HDMI support for TQMa6x/MBa6 board. - A series from Andrew Lunn to add phy-mode and fixed links for Ethernet devices on imx51, imx6qdl and vf610. - A bunch of changes from Fabio Estevam to clean up deprecated and invalid properies, fix up node names to remove dt-schema warnings. - A series of maintenance updates for Protonic Holland boards, mostly on the USB subsystem configuration, thermal zones, and the naming of GPIO keys. - Update dma-apbh device node name to remove dtbs_check warnings. - Remove invalid nodes from fan-controller for a couple of Gateworks boards. - Small random updates and clean-ups on various boards. * tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits) ARM: dts: imx6qdl: vicut1: rename power to power-button ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG port ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG port ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port ARM: dts: imx6dl: prtmvt: fix different USB related warnings ARM: dts: imx6dl: alti6p: fix different USB related warnings ARM: dts: imx6dl: vicut1: Address USB related warnings ARM: dts: imx6dl: Add trip points to thermal zones on several devices ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65 ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97 ARM: dts: imx: Use 'eeprom' as node name ARM: dts: imx6ul-ccimx6ulsom: Fix the "coin" regulator name ARM: dts: imx: Use 'pmic' as node name ARM: dts: imx6: Use the mux- prefix ARM: dts: imx7d-sdb: Allow UHS modes ... Link: https://lore.kernel.org/r/20230610072530.418847-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dtArnd Bergmann1-0/+1
- fix DCLK clock names - new board ICnova A20 ADB4006 - add D1 SPI node - add bluetooth node for chip board - add extra mmc2 pinmux to sun5i - add axp209 iio-hwmon node * tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: axp209: Add iio-hwmon node for internal temperature ARM: dts: sun5i: Add port E pinmux settings for mmc2 ARM: dts: sun5i: chip: Enable bluetooth riscv: dts: allwinner: d1: Add SPI controllers node arm: dts: sunxi: Add ICnova A20 ADB4006 board dt-bindings: arm: sunxi: add ICnova A20 ADB4006 binding ARM: dts: sunxi: rename tcon's clock output Link: https://lore.kernel.org/r/20230609210452.GA17638@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dtArnd Bergmann1-1/+2
STM32 DT for v6.5, round 1 Highlights: ---------- - MCU/MPU: - Replace deprecated st,hw-flow-ctrl by uart-has-rtscts. - Fix LTDC/DSI warnings. - MPU: - STMP32MP15: - Add OTP part number and Vrefint calibration in bsec. - M4 hold management updated. As SMC call is deprecated, the service is moved on a SCMI service. - Add ADC internal channels (VREFINT/VDDCORE). - ST: - Enable ADC1&2 on STM32MP15 DKx boards. - Adopt generic IIO bindings on STM32MP157C ED1 - Add supplies for OV5640 in STM32MP157C EV1 to fix yaml validation. - Fix i2s bindings to match with the YAML validation (DKx boards). - DH: - Rearrange MAC EEPROM. - Rename AV96 sound card. - Adopt generic IIo bindings. - Fix audio routing. -PHYTEC: - Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM. This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC, up to 16 MB QSPI and up to 128 GB NAND flash. * tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits) ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1 ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1 ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards ARM: dts: stm32: add vrefint support to adc2 on stm32mp15 ARM: dts: stm32: add vrefint calibration on stm32mp15 ARM: dts: stm32: add adc internal channels to stm32mp15 ARM: dts: stm32: fix ltdc warnings in stm32mp15 boards ARM: dts: stm32: fix dsi warnings on stm32mp15 boards dt-bindings: display: st,stm32-dsi: Remove unnecessary fields ARM: dts: stm32: fix warnings on stm32f469-disco board ARM: dts: stm32: Shorten the AV96 HDMI sound card name ARM: dts: stm32: fix m4_rproc references to use SCMI for stm32mp15 ARM: dts: stm32: Update Cortex-M4 reset declarations on stm32mp15 ARM: dts: stm32: add STM32MP1-based Phytec board ... Link: https://lore.kernel.org/r/08d711de-bb6d-a976-735b-5e18b19818ea@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-13ARM: dts: qcom: Add Samsung Galaxy Express supportRudraksha Gupta1-0/+1
Add a very basic device tree file for the Samsung Galaxy Express SGH-I437. Currently, the following things work: UART, eMMC, SD Card, and USB. Signed-off-by: Rudraksha Gupta <guptarud@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230607050025.86636-5-guptarud@gmail.com
2023-06-01arm: dts: bcm: Enable device-tree overlay support for RPi devicesAurelien Jarno1-0/+18
Add the '-@' DTC option for the Raspberry Pi devices. This option populates the '__symbols__' node that contains all the necessary symbols for supporting device-tree overlays (for instance from the firmware or the bootloader) on these devices. The Rasbperry Pi devices are well known for their GPIO header, that allow various "HATs" or other modules do be connected and this enables users to create out-of-tree device-tree overlays for these modules. Please note that this change does increase the size of the resulting DTB by ~40%. For example, with v6.4-rc1 increase in size is as follows: bcm2711-rpi-400.dtb 27556 -> 38141 bytes bcm2711-rpi-4-b.dtb 27484 -> 38069 bytes bcm2711-rpi-cm4-io.dtb 27373 -> 38076 bytes bcm2835-rpi-a.dtb 12879 -> 18235 bytes bcm2835-rpi-a-plus.dtb 13015 -> 18371 bytes bcm2835-rpi-b.dtb 12997 -> 18377 bytes bcm2835-rpi-b-plus.dtb 13237 -> 18666 bytes bcm2835-rpi-b-rev2.dtb 13085 -> 18514 bytes bcm2835-rpi-cm1-io1.dtb 13109 -> 18528 bytes bcm2835-rpi-zero.dtb 12923 -> 18311 bytes bcm2835-rpi-zero-w.dtb 13449 -> 18889 bytes bcm2836-rpi-2-b.dtb 14500 -> 20252 bytes bcm2837-rpi-3-a-plus.dtb 14930 -> 20713 bytes bcm2837-rpi-3-b.dtb 15107 -> 20979 bytes bcm2837-rpi-3-b-plus.dtb 15463 -> 21443 bytes bcm2837-rpi-cm3-io3.dtb 14429 -> 20098 bytes bcm2837-rpi-zero-2-w.dtb 14781 -> 20524 bytes Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Link: https://lore.kernel.org/r/20220410225940.135744-3-aurelien@aurel32.net [ukleinek: rebased to v6.4-rc1] Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2023-05-31ARM: dts: omap4: add initial support for Epson Moverio BT-200Andreas Kemnade1-0/+1
Add the devices working with current drivers for the Epson Moverio BT-200 AR glasses consisting of a control unit and the glasses itself. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Message-Id: <20230313110409.2294154-1-andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-05-18arm: dts: sunxi: Add ICnova A20 ADB4006 boardLudwig Kormann1-0/+1
Add board support for ICnova A20 SomPi compute module on ICnova ADB4006 development board. Specification: SoM - Processor: Allwinner A20 Cortex-A7 Dual Core at 1GHz - 512MB DDR3 RAM - Fast Ethernet (Phy: Realtek RTL8201CP) ADB4006 - I2C - 2x USB 2.0 - 1x Fast Ethernet port - 1x SATA - 2x buttons (PWRON, Boot) - 2x LEDS - serial console - HDMI - µSD-Card slot - Audio Line-In / Line-Out - GPIO pinheaders https://wiki.in-circuit.de/index.php5?title=ICnova_ADB4006 https://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Ludwig Kormann <ludwig.kormann@ict42.de> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230510111528.2155582-3-ludwig.kormann@ict42.de Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-05-16ARM: dts: stm32: add STM32MP1-based Phytec boardSteffen Trumtrar1-1/+2
Add the Phytec STM32MP1-3 Dev board. The devboard uses a Phytec stm32m157c-som. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-05-13ARM: dts: imx6ull-dhcor: Add Marantec maveo boxChristoph Niedermaier1-0/+1
Add support for Marantec maveo box. The system is used to get a smart conntection to a door drive. It has USB, WiFi, Bluetooth, Zigbee and NFC interfaces. The core of this system is a soldered i.MX6ULL DHCOR SoM from DH electronics. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-11ARM: dts: kirkwood: Add Endian 4i Edge 200 boardPawel Dembicki1-0/+1
Add Endian 4i Edge 200 is 5-port firewall. It have also clone: Endian UTM Mini (The same hardware, with added WLAN card). Hardware: - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz - Ram: 512MB (4x Nanya NT5TU128M8GE-AC) - NAND Flash: 512MB (Micron 29F4G08AAC) - Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2) - Lan 5: 1x GBE (Marvell 88E1116R-NNC1) - Storage: MicroSD Slot - MCPIE: MiniPCIe Slot present [fitted with SparkLan WPEA-110N/E (Atheros AR9280 chipset) in Endian UTM Mini WLAN only] - USB: 1x USB 2.0 port - Console: RJ-45 port - LEDs: 3x GPIO controlled Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-04-14Merge tag 'sunxi-dt-for-6.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dtArnd Bergmann1-1/+4
- added D1 crypto node - enabled DVFS on OrangePi PC2 board - added GPIO line names on Nezha D1 board - added suniv USB nodes and enabled on licheepi-nano - new suniv boards: PopStick v1.1 and Lctech Pi - added Allwinner T113-s DTSI - added MangoPi MQ-R T113-s board variant - swapped DMA names for A23, A31, A33, D1, H3, H5, V3s * tag 'sunxi-dt-for-6.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: riscv: dts: allwinner: d1: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sunxi: add MangoPi MQ-R-T113 board dt-bindings: arm: sunxi: document MangoPi MQ-R board names ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi dts: add riscv include prefix link ARM: dts: suniv: Add Lctech Pi F1C200s devicetree ARM: dts: suniv: add device tree for PopStick v1.1 dt-binding: arm: sunxi: add two board compatible strings dt-bindings: vendor-prefixes: add Source Parts and Lctech names ARM: dts: suniv: licheepi-nano: enable USB ARM: dts: suniv: add USB-related device nodes riscv: dts: nezha-d1: add gpio-line-names arm64: dts: allwinner: h5: OrangePi PC2: add OPP table to enable DVFS riscv: dts: allwinner: d1: Add crypto engine node Link: https://lore.kernel.org/r/20230408125156.GA17050@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'imx-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dtArnd Bergmann1-0/+9
i.MX arm32 device tree changes for 6.4: - New board device trees: Tolino Vison, chargebyte Tarragon, new revision of the IOTA board. - A couple of imx7d-remarkable2 update to enable cyttsp5 touch and BD71815 PMIC. - A series from Oleksij Rempel to configure Ethernet reference clock from device tree. - A series from Stefan Wahren to use label references for i.MX28 based boards. * tag 'imx-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (31 commits) ARM: dts: imx6ull: Add chargebyte Tarragon support ARM: dts: imx: Add devicetree for Tolino Vison ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board ARM: dts: imx6dl-yapp4: Remove unneeded status "okay" ARM: dts: imx6dl-yapp4: Move status to the end of property list ARM: dts: imx6dl-yapp4: Move phy reset into switch node ARM: dts: imx28-tx28: add SPDX-License-Identifier ARM: dts: imx28-ts4600: Convert to use label references ARM: dts: imx28-evk: Convert to use label references ARM: dts: imx28-duckbill-2: Include base board ARM: dts: imx28-duckbill: Convert to use label references ARM: dts: imx28-cfa10036: Convert to use label references ARM: dts: imx28-apx4devkit: Convert to use label references ARM: dts: imx28-m28/sps1: Convert to use label references ARM: dts: imx28-apf28: Convert to use label references ARM: dts: imx7d-remarkable2: Enable the rohm,bd71815 ARM: dts: imx7d-remarkable2: Enable the cyttsp5 ARM: dts: imx6dl-yapp4: Use reset-gpios property name ARM: dts: imx6ul-prti6g: configure ethernet reference clock parent ARM: dts: imx6ul: set enet_clk_ref to CLK_ENETx_REF_SEL ... Link: https://lore.kernel.org/r/20230408101928.280271-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-06ARM: dts: imx6ull: Add chargebyte Tarragon supportStefan Wahren1-0/+4
This adds the support for chargebyte Tarragon, which is an Electrical Vehicle Supply Equipment (EVSE) for AC charging stations (according to IEC 61851, ISO 15118). The Tarragon board is based on an i.MX6ULL SoC and is available in 4 variants (Master, Slave, SlaveXT, Micro), which provide more or less peripherals. Supported features: * 512 MB DDR RAM * eMMC * Debug UART * 100 Mbit Ethernet * USB 2.0 Host interface * Powerline communication (QCA700x) * 2x RS485 * Digital in- and outputs (12 V) * One-Wire master for external temp sensors * 2x relay outputs * 2x motor interfaces Link: https://chargebyte.com/products/charging-station-communication/charge-control-c Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-04-04ARM: dts: oxnas: remove obsolete device tree filesNeil Armstrong1-3/+0
Due to lack of maintainance and stall of development for a few years now, and since no new features will ever be added upstream, remove support for OX810 and OX820 devices. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-03-27ARM: dts: sunxi: add MangoPi MQ-R-T113 boardAndre Przywara1-0/+1
The MangoPi MQ-R-T113 is a small SBC with the Allwinner T113-s3 SoC. The SoC features two Arm Cortex-A7 cores and 128 MB of co-packaged DDR3 DRAM. The board adds mostly connectors and the required regulators, plus a Realtek RTL8189FTV WiFi chip. Power comes in via a USB-C connector wired as a peripheral, and there is a second USB-C connector usable as a host port. Add a .dtsi file describing most of the board's peripherals, and include that from the actual board .dts file. This allows to re-use the .dtsi for the MQ-R-F113 RISC-V variant of that board. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230320005249.13403-5-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-03-27ARM: dts: am57xx-idk: Add IDK displays and touchscreensAndrew Davis1-0/+4
This is a more interesting use of DT Overlays than the previous patches. Here we have two touchscreen modules. Each is compatible with, and can be attached to, either of the two AM57xx IDK development board variants (AM571x or AM572x). Due to the way the extension header was wired on the development boards, the touch sensor on the touchscreen modules will connect to different SoC pins when connected. For this the touch sensor is modeled as an additional overlay that is specific to the development board for which it is connected. Basically the LCD overlay can be swapped, but the touchscreen overlay that attaches to the LCD must be used with the corresponding base DT and not to the LCD. AM571x -\ /- osd101t2045.dtbo -\ /- am571x-idk-touchscreen.dtbo X X AM572x -/ \- osd101t2587.dtbo -/ \- am572x-idk-touchscreen.dtbo Signed-off-by: Andrew Davis <afd@ti.com> Message-Id: <20230307161715.15209-4-afd@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-03-27ARM: dts: ti: Add AM57xx GP EVM Rev A3 board supportAndrew Davis1-0/+2
The A3 revision of the AM57xx GP EVM has the same EVM feature set as the original but is paired with an updated revision C BeagleBoard X15. DT Overlays allow us to model this in the same way, we simply apply the EVM overlay to the Rev C BeagleBoard to create the Rev A3 AM57xx GP EVM. Signed-off-by: Andrew Davis <afd@ti.com> Message-Id: <20230307161715.15209-3-afd@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-03-27ARM: dts: ti: Add AM57xx GP EVM board supportAndrew Davis1-0/+2
The AM57xx GP EVM boards are built on top the AM57xx BeagleBoard-X15. The EVM extends the BeagleBoard by adding a touchscreen, some buttons, and a handful of peripheral extension slots. Being a plugin extension of an existing standalone board; we define the am57xx-evm as a composite-DTB of the base am57xx-beagle-x15 and a new am57xx-evm overlay. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Andrew Davis <afd@ti.com> Message-Id: <20230307161715.15209-2-afd@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-03-27ARM: dts: imx: Add devicetree for Tolino VisonAndreas Kemnade1-0/+1
Add a devicetree for the Tolino Vision Ebook reader. It is based on boards marked with "37NB-E60Q30+4A3". It is equipped with an i.MX6SL SoC. Expected to work: - Buttons - Wifi - LEDs - uSD - eMMC - USB - RTC - Touchscreen - Backlight Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA boardMichal Vokáč1-0/+4
The PCB used for all the current boards (Ursa, Draco, Hydra, Orion, Crux) was slightly redesigned and delivers some new features while some unused components were removed. - External RTC chip with supercap added. - Secure element added. - LCD display power supply enable/disable signal added. - Touch keyboard reset and interrupt signals added. - Factory reset GPIO button added. - Audio codec LM49350 (EoL) removed and replaced by PWM audio output. - QCA8334 switch was replaced by Marvell 88E6141. - PCIe completely removed. - uSD card removed and replaced by board-to-board expansion connector. There are four configuration variants of the new board: 1. Pegasus The board configuration is based on Orion with the following major changes: - Quad core SoC - 4GB of RAM - RTC with supercap added - Secure element added 2. Pegasus+ This is the very same board as Pegasus but uses the i.MX6QuadPlus SoC. 3. Lynx The board configuration is based on Draco with the following major changes: - DualLite SoC - 1GB of RAM - RTC with supercap added - Secure element added 4. Phoenix The board configuration is based on Ursa with the following major changes: - DualLite Soc - 1GB of RAM - RTC with supercap added - Secure element added - LCD display support removed - UART2 removed - Factory reset GPIO button added Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-23ARM: dts: suniv: Add Lctech Pi F1C200s devicetreeAndre Przywara1-0/+1
The Lctech Pi F1C200s (also previously known under the Cherry Pi brand) is a small development board with the Allwinner F1C200s SoC. This is the same as the F1C100s, but with 64MB instead of 32MB co-packaged DRAM. Alongside the obligatory micro-SD card slot, the board features a SPI-NAND flash chip, LCD and touch connectors, and unpopulated expansion header pins. There are two USB Type-C ports on the board: One supplies the power, also connects to the USB MUSB OTG controller port. The other one is connected to an CH340 USB serial chip, which in turn is connected to UART1. Add a devicetree file, so that the board can be used easily. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230319212936.26649-7-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-03-23ARM: dts: suniv: add device tree for PopStick v1.1Icenowy Zheng1-1/+2
PopStick is a minimal Allwinner F1C200s dongle, with its USB controller wired to a USB Type-A plug, a SD slot and a SPI NAND flash on board, and an on-board CH340 USB-UART converted connected to F1C200s's UART0. Add a device tree for it. As F1C200s is just F1C100s with a different DRAM chip co-packaged, directly use F1C100s DTSI here. This commit covers the v1.1 version of this board, which is now shipped. v1.0 is some internal sample that have not been shipped at all. Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230319212936.26649-6-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-02-20Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+11
Pull SoC DT updates from Arnd Bergmann: "About a quarter of the changes are for 32-bit arm, mostly filling in device support for existing machines and adding minor cleanups, mostly for Qualcomm and Samsung based machines. Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from Rockchips that have been around for a while but were lacking kernel support so far: RV1126 is a Vision SoC with an NPU and is used in the Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design for TV boxes and so far only comes with a dts for its refernece design. The other 32-bit boards that were added are two ASpeed AST2600 based BMC boards, the Microchip sam9x60_curiosity development board (Armv5 based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards for i.MX53 and i.MX6ULL. On the RISC-V side, there are fewer patches, but a total of ten new single-board computers based on variations of the Allwinner D1/T113 chip, plus one more board based on Microchip Polarfire. As usual, arm64 has by far the most changes here, with over 700 non-merge changesets, among them over 400 alone for Qualcomm. The newly added SoCs this time are all recent high-end embedded SoCs for various markets, each on comes with support for its reference board: - Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones - Qualcomm QDU1000/QRU1000 5G RAN platform - Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs - TI J784S4 for industrial and automotive applications In total, there are 46 new arm64 machines: - Reference platforms for each of the five new SoCs - Three Amlogic based development boards - Six embedded machines based on NXP i.MX8MM and i.MX8MP - The Mediatek mt7986a based Banana Pi R3 router - Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115 (Snapdragon 662) and SM8250 (Snapdragon 865) - Two LTE dongles, also based on MSM8916 - Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610), SDM450 and SDM632 - Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c) - Nine development boards based on Rockchips RK3588, RK3568, RK3566 and RK3328. - Five development machines based on TI K3 (AM642/AM654/AM68/AM69) The cleanup of dtc warnings continues across all platforms, adding to the total number of changes" * tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits) dt-bindings: riscv: correct starfive visionfive 2 compatibles ARM: dts: socfpga: Add enclustra PE1 devicetree dt-bindings: altera: Add enclustra mercury PE1 arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings arm64: dts: qcom: qcs404: align RPM G-Link node with bindings arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam arm64: dts: qcom: sc7280: Adjust zombie PWM frequency arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses arm64: dts: qcom: sm7225-fairphone-fp4: move status property down arm64: dts: qcom: pmk8350: Use the correct PON compatible arm64: dts: qcom: sc8280xp-x13s: Enable external display arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks arm64: dts: qcom: sm8350-hdk: enable GPU arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes arm64: dts: qcom: sm8350: finish reordering nodes arm64: dts: qcom: sm8350: move more nodes to correct place arm64: dts: qcom: sm8350: reorder device nodes ...
2023-02-16Merge tag 'socfpga_dts_updates_for_v6.3_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dtArnd Bergmann1-0/+1
SoCFPGA dts updates for v6.3, part 2 - Add support for the enclustra PE1 board that is based on Arria10 * tag 'socfpga_dts_updates_for_v6.3_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: Add enclustra PE1 devicetree dt-bindings: altera: Add enclustra mercury PE1 Link: https://lore.kernel.org/r/20230216160910.509065-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-16ARM: dts: socfpga: Add enclustra PE1 devicetreeSteffen Trumtrar1-0/+1
The enclustra PE1 is a baseboard from enclustra GmbH for the enclustra Mercury AA1+ SOM. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2023-02-09Merge tag 'at91-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dtArnd Bergmann1-0/+1
AT91 device tree updates for 6.3 #2 It contains: - cleanups arround flexcom nodes on SAM9X60 SoC as follows: - preserve same ID for flexcoms and the embedded nodes (e.g. flx4 will embed uart4, spi4, i2c4 but not e.g. uart1, spi2, i2c3); - SoC specific bindings were moved from board specific file to SoC specific file - DMA bindings for all flexcom nodes were added - SoC file was filled with missing flexcom nodes - new SAM9X60 Curiosity board that contains 1 uSDcard interface, 1 SDcard interface, 1 USB device interface, 2 USB Type-A interfaces, 2 CAN interfaces, 1 10/100 Ethernet interface, 1 LCD RGB666 interface, 1 Gb DDR2, 4 Gb NAND Flash, 2Kb EEPROM, leds, button, power regulators, UART and JTAG connectors * tag 'at91-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board dt-bindings: arm: at91: Add info on sam9x60 curiosity ARM: dts: at91: sam9x60: Add missing flexcom definitions ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART ARM: dts: at91: sam9x60: fix spi4 node ARM: dts: at91: sam9x60: move flexcom definitions ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions Link: https://lore.kernel.org/r/20230209084930.289721-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-09Merge tag 'aspeed-6.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dtArnd Bergmann1-0/+2
ASPEED device tree updates for 6.3 - New machines * Ufispace NCPLite AST2600 BMC * Facebook Greatlakes AST2600 BMC - Updates for ethanolx, bletchley and tyan s8036 * tag 'aspeed-6.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: p10bmc: Enable UART2 ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC dt-bindings: arm: aspeed: document Ufispace NCPLite BMC dt-bindings: vendor-prefixes: Add prefix for Ufi Space arm: dts: aspeed: tyan s8036: Enable kcs interrupts ARM: dts: aspeed: bletchley: Enable wdtrst1 ARM: dts: aspeed: bletchley: Rename flash1 label ARM: dts: aspeed: ethanolx: Add BIOS flash chip ARM: dts: aspeed: ethanolx: Enable CTS/RTS pins on UART1 ARM: dts: aspeed: ethanolx: Add label for the master partition ARM: dts: aspeed: ethanolx: Correct EEPROM device name ARM: dts: aspeed: ethanolx: Enable VUART ARM: dts: aspeed: greatlakes: Add Facebook greatlakes (AST2600) BMC dt-bindings: arm: aspeed: add Facebook Greatlakes board Link: https://lore.kernel.org/r/CACPK8XdbffU5yRSZF-zR2xv-+6aJK+hEXP8TOkW=SvS+nNTGxg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-08ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity boardDurai Manickam KR1-0/+1
Add device tree file for sam9x60 curiosity board. Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230207110651.197268-9-durai.manickamkr@microchip.com
2023-02-03Merge tag 'v6.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dtArnd Bergmann1-0/+2
Two new 32bit SoC were added, the rv1126 and rk3128. New boards are thr rk3128-eval-board, and a number of rv1126-based compute modules from Edgeble AI. Also included are some dt-binding improvements with relevant Acks from maintainers when the changes touch these areas. * tag 'v6.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: dt-bindings: phy: rename phy-rockchip-inno-usb2.yaml dt-bindings: soc: rockchip: grf: add rockchip,rk3288-dp-phy.yaml dt-bindings: phy: rockchip: convert rockchip-dp-phy.txt to yaml ARM: dts: rockchip: Enable Ethernet on rv1126 Neu2-IO ARM: dts: rockchip: Add Ethernet GMAC node for RV1126 ARM: dts: rockchip: Add ethernet rgmiim1 pin-control for rv1126 dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 6 ARM: dts: rockchip: add brcmf node to rk3066a-mk808 ARM: dts: rockchip: add space between label and nodename nfc pinctrl on rk3128 ARM: dts: rockchip: add rk3128-evb ARM: dts: rockchip: add rk3128 soc dtsi dt-bindings: arm: rockchip: Add Rockchip RK3128 Evaluation board ARM: dts: rockchip: Add Edgeble Neural Compute Module 2(Neu2) IO board ARM: dts: rockchip: Add Edgeble RV1126 Neural Compute Module 2(Neu2) dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 2 dt-bindings: vendor-prefixes: Add Edgeble AI Technologies Pvt. Ltd. ARM: dts: rockchip: Add Rockchip RV1126 SoC ARM: dts: rockchip: Add Rockchip RV1126 pinctrl dt-bindings: arm: rockchip: Add pmu compatible for rv1126 Link: https://lore.kernel.org/r/5651506.31r3eYUQgx@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30Merge tag 'imx-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dtArnd Bergmann1-0/+4
i.MX arm device tree change for 6.3: - New board support: SK-iMX53, DHCOM i.MX6ULL based boards. - Increase MMC maximum frequency for i.MXRT1050. - A series from Krzysztof Kozlowski to align LED node names with dtschema, and use use generic node name for rave-sp device. - Use new media bus type macros for i.MX device trees. - A series from Marcel Ziswiler to improve gpio-key for Colibri and Apalis device trees. - A series from Marek Vasut to drop interrupt-names from dma-apb device. - A series from Philippe Schenker to disable USB over-current for Colibri and Apalis boards. - A few other small corrections and random changes. * tag 'imx-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (29 commits) ARM: dts: imx6ull-dhcom: Add DHSOM based DRC02 board ARM: dts: imx6ull-dhcom: Add DHCOM based PicoITX board ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 board ARM: dts: imx7s: correct iomuxc gpr mux controller cells ARM: dts: imx: use generic node name for rave-sp ARM: dts: ls1021a: Disable CAN nodes by default ARM: dts: apalis/colibri-imx6/6ull/7: proper gpio-key node names ARM: dts: colibri-imx6ull: improve wake-up with gpio key ARM: dts: colibri-imx6: improve wake-up with gpio key ARM: dts: imx: e70k02: Add touchscreen ARM: dts: vfxxx: Swap SAI DMA order ARM: dts: freescale: Use new media bus type macros ARM: dts: tqma6ul + mba6ulx: Fix temperature sensor compatible ARM: dts: imx: Add support for SK-iMX53 board ARM: dts: imx7s: Drop dma-apb interrupt-names ARM: dts: imx6ul: Drop dma-apb interrupt-names ARM: dts: imx6sx: Drop dma-apb interrupt-names ARM: dts: imx6qdl: Drop dma-apb interrupt-names ARM: dts: mxs: Drop dma-apb interrupt-names ARM: dts: imx6qdl: use MAC-address from nvmem ... Link: https://lore.kernel.org/r/20230130023947.11780-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30ARM: dts: imx6ull-dhcom: Add DHSOM based DRC02 boardChristoph Niedermaier1-0/+1
Add DT for DH DRC02 unit, which is a universal controller device. The system has two ethernet ports, two CANs, RS485 and RS232, USB, capacitive buttons and an OLED display. For this board a DHCOM i.MX6ULL SoM configuration without WiFi/BT is used. The interface is used for the SD card instead. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-01-30ARM: dts: imx6ull-dhcom: Add DHCOM based PicoITX boardChristoph Niedermaier1-0/+1
Add DT for DH PicoITX unit, which is a bare-bones carrier board for the DHCOM. The board has ethernet port, USB, CAN, LED and a custom board-to-board expansion connector. For this board a DHCOM i.MX6ULL SoM configuration without WiFi/BT is used. The interface is used for the SD card instead. Make this adjustment by using a separate DT include file. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-01-30ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 boardChristoph Niedermaier1-0/+1
Add support for DH electronics DHCOM SoM and PDK2 rev. 400 carrier board. This is an SoM with i.MX6ULL and an evaluation kit. The baseboard provides Ethernet, UART, USB, CAN and optional display. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-01-27ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMCJordan Chang1-0/+1
Add initial version of device tree for Ufispace NCPlite platform which is equipped with AST2600-based BMC. Signed-off-by: Jordan Chang <jordan.chang@ufispace.com> Link: https://lore.kernel.org/r/20230119102102.73414-4-jordan.chang@ufispace.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-01-24ARM: dts: exynos: Add Samsung Galaxy S5 (SM-G900H) boardMarkuss Broks1-0/+1
Samsung Galaxy S5 (SM-G900H) was sold alongside Samsung Galaxy S5 with Snapdragon SoC, however the Exynos version features a 3G capable Intel modem instead of Qualcomm version featuring LTE modem. This phone is based on Exynos5422. Currently, the touchscreen, USB, eMMC and the PMIC are enabled in the device-tree. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Link: https://lore.kernel.org/r/20230123222329.13994-3-markuss.broks@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-01-23ARM: dts: aspeed: greatlakes: Add Facebook greatlakes (AST2600) BMCDelphine CC Chiu1-0/+1
Add linux device tree entry related to greatlakes specific devices connected to BMC SoC. Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> Link: https://lore.kernel.org/r/20221111034828.2377-3-Delphine_CC_Chiu@Wiwynn.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-01-16ARM: s3c: remove all s3c24xx supportArnd Bergmann1-2/+0
The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark as deprecated and schedule removal") and can be removed. This includes all files that are exclusively for s3c24xx and not shared with s3c64xx, as well as the glue logic in Kconfig and the maintainer file entries. Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Christer Weinigel <christer@weinigel.se> Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Simtec Linux Team <linux@simtec.co.uk> Cc: openmoko-kernel@lists.openmoko.org Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-09ARM: dts: imx: Add support for SK-iMX53 boardDmitry Baryshkov1-0/+1
Add support for the StartKit sk-imx53 board, a simple development board with the iMX536A SoC. Tested and works: - UARTs - SPI - I2C - GPU - USB - uSD - NAND - Ethernet Not tested: - Display - VPU - capture Not yet working: - Sound Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-12-26ARM: dts: rockchip: add rk3128-evbJohan Jonker1-0/+1
Add rk3128 eval board dts Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/56dbd2ab-dc2c-2f7d-0403-1d29dfd3c2e7@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-12-26ARM: dts: rockchip: Add Edgeble Neural Compute Module 2(Neu2) IO boardJagan Teki1-0/+1
Neural Compute Module 2(Neu2) IO board is an industrial form factor evaluation board from Edgeble AI. General features: - microSD slot - MIPI DSI connector - 2x USB Host - 1x USB OTG - Ethernet - mini PCIe - Onboard PoE - RS485, RS232, CAN - Micro Phone array - Speaker - RTC battery slot - 40-pin expansion Neu2 needs to mount on top of this IO board in order to create complete Edgeble Neural Compute Module 2(Neu2) IO platform. Add support for it. Signed-off-by: Jagan Teki <jagan@edgeble.ai> Link: https://lore.kernel.org/r/20221129075424.189655-9-jagan@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-12-07Merge tag 'qcom-dts-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dtArnd Bergmann1-0/+3
More Qualcomm DTS updates for 6.2 This introduces support for the OnePlus One, on MSM8974Pro, and properly marks other Pro devices as compatible thereof. Also on MSM8974, the description of USB devices and their PHYs are cleaned up. On the binding side compatibles for recently added ARM and ARM64 boards are added. * tag 'qcom-dts-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (102 commits) dt-bindings: arm: qcom: Add zombie ARM: dts: qcom: msm8974: Add OnePlus One dt-bindings: arm: qcom: Document oneplus,bacon device ARM: dts: qcom: msm8974: clean up USB nodes arm: dts: qcom: use qcom,msm8974pro for pro devices dt-bindings: arm: qcom: split MSM8974 Pro and MSM8974 ARM: dts: qcom: align LED node names with dtschema dt-bindings: arm: qcom: Document additional sa8540p device dt-bindings: arm: qcom: Add Xperia 5 IV (PDX224) dt-bindings: arm: qcom: Document msm8956 and msm8976 SoC and devices dt-bindings: arm: add xiaomi,sagit board based on msm8998 chip dt-bindings: arm: qcom: add sdm670 and pixel 3a compatible dt-bindings: arm: cpus: add qcom kryo 360 compatible ARM: dts: qcom-msm8960-cdp: align TLMM pin configuration with DT schema ARM: dts: qcom-msm8960: use define for interrupt constants dt-bindings: arm: qcom: Document SM6375 & Xperia 10 IV ARM: dts: qcom-apq8060: align TLMM pin configuration with DT schema ARM: dts: qcom: msm8226: Add MMCC node dt-bindings: arm: qcom: Separate LTE/WIFI SKU for sc7280-evoker dt-bindings: arm: qcom: Document QDU1000/QRU1000 SoCs and boards ... Link: https://lore.kernel.org/r/20221207153201.3233015-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-12-05ARM: dts: qcom: msm8974: Add OnePlus OneJulian Goldsmith1-0/+1
OnePlus One is a smartphone launched in 2014 and is based on the Snapdragon 801 SoC (-AC variant). Supported features: * ADSP * Charger * Coincell charger * Fuel gauge * Internal storage * Touchscreen * UART * USB * Wifi/Bluetooth Signed-off-by: Julian Goldsmith <julian@juliangoldsmith.com> Co-developed-by: Oleg Chernovskiy <kanedias@keemail.me> Signed-off-by: Oleg Chernovskiy <kanedias@keemail.me> Co-developed-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221128172531.828660-2-luca@z3ntu.xyz
2022-11-30Merge tag 'arm-soc/for-6.2/devicetree' of https://github.com/Broadcom/stblinux into soc/dtArnd Bergmann1-0/+2
This pull request contains Broadcom ARM-based SoCs Device Tree changes for 6.2, please pull the following: - Linus adds support for the D-Link DWL-8610AP which is based upon the BCM53016 SoC and the D-Link DIR-890L routers - Maxime resolves a long standing issue affecting Raspberry Pi devices by switching entirely over to the VPU firmware clock provider rather than mixing the "bare metal" clock driver and VPU - Rafal corrects the description of the TP-Link router partitions to use the "safeloader" partition parser - Stefan fixes a number of invalid underscores in the bcm283x DTS files and also moves the ACT LED into a separate DTS include file for better re-use - Krzysztof aligns the LEDs DT nodes to the proper schema format - Pierre adds missing cache properties to various SoCs * tag 'arm-soc/for-6.2/devicetree' of https://github.com/Broadcom/stblinux: arm: dts: Update cache properties for broadcom ARM: dts: broadcom: align LED node names with dtschema ARM: dts: bcm283x: Move ACT LED into separate dtsi ARM: dts: bcm283x: Fix underscores in node names ARM: dts: BCM5301X: Correct description of TP-Link partitions ARM: dts: bcm47094: Add devicetree for D-Link DIR-890L dt-bindings: ARM: add bindings for the D-Link DIR-890L ARM: dts: bcm2835-rpi: Use firmware clocks for display ARM: dts: bcm283x: Remove bcm2835-rpi-common.dtsi from SoC DTSI ARM: dts: bcm53016: Add devicetree for D-Link DWL-8610AP dt-bindings: ARM: add bindings for the D-Link DWL-8610AP Link: https://lore.kernel.org/r/20221129191755.542584-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-30Merge tag 'mvebu-dt-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dtArnd Bergmann1-0/+1
mvebu dt for 6.2 (part 1) Fix assigned-addresses for every PCIe Root Port Align LED node names with dtschema Add a new kirkwood based board: Zyxel NSA310S Fix compatible string for gpios for Armada 38x and 39x Add interrupts for watchdog on Armada XP Turris Omnia (Armada 385 based): - Add switch port 6 node - Add ethernet aliases Switch to using gpiod API in pm-board code * tag 'mvebu-dt-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: armada-xp: add interrupts for watchdog ARM: dts: armada: align LED node names with dtschema ARM: mvebu: switch to using gpiod API in pm-board code ARM: dts: armada-39x: Fix compatible string for gpios ARM: dts: armada-38x: Fix compatible string for gpios ARM: dts: turris-omnia: Add switch port 6 node ARM: dts: turris-omnia: Add ethernet aliases ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port ARM: dts: kirkwood: Add Zyxel NSA310S board Link: https://lore.kernel.org/r/87cz979adf.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.