| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull xen updates from Juergen Gross:
- Xen event channel handling fix for a regression with a rare kernel
config and some added hardening
- better support of running Xen dom0 in PVH mode
- a cleanup for the xen grant-dma-iommu driver
* tag 'for-linus-6.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: increment refcnt only if event channel is refcounted
xen/evtchn: avoid WARN() when unbinding an event channel
x86/xen: attempt to inflate the memory balloon on PVH
xen/grant-dma-iommu: Convert to platform remove callback returning void
|
|
Pull x86 platform driver updates from Ilpo Järvinen:
- New acer-wmi HW support
- Support for new revision of amd/pmf heartbeat notify
- Correctly handle asus-wmi HW without LEDs
- fujitsu-laptop battery charge control support
- Support for new hp-wmi thermal profiles
- Support ideapad-laptop refresh rate key
- Put intel/pmc AI accelerator (GNA) into D3 if it has no driver to
allow entry into low-power modes, and temporarily removed Lunar Lake
SSRAM support due to breaking FW changes causing probe fail (further
breaking FW changes are still pending)
- Report pmc/punit_atom devices that prevent reacing low power levels
- Surface Fan speed function support
- Support for more sperial keys and complete the list of models with
non-standard fan registers in thinkpad_acpi
- New DMI touchscreen HW support
- Continued modernization efforts of wmi
- Removal of obsoleted ledtrig-audio call and the related dependency
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits)
platform/x86/intel/pmc: Improve PKGC residency counters debug
platform/x86: asus-wmi: Consider device is absent when the read is ~0
Documentation/x86/amd/hsmp: Updating urls
platform/mellanox: mlxreg-hotplug: Remove redundant NULL-check
platform/x86/amd/pmf: Update sps power thermals according to the platform-profiles
platform/x86/amd/pmf: Add support to get sps default APTS index values
platform/x86/amd/pmf: Add support to get APTS index numbers for static slider
platform/x86/amd/pmf: Add support to notify sbios heart beat event
platform/x86/amd/pmf: Add support to get sbios requests in PMF driver
platform/x86/amd/pmf: Disable debugfs support for querying power thermals
platform/x86/amd/pmf: Differentiate PMF ACPI versions
x86/platform/atom: Check state of Punit managed devices on s2idle
platform/x86: pmc_atom: Check state of PMC clocks on s2idle
platform/x86: pmc_atom: Check state of PMC managed devices on s2idle
platform/x86: pmc_atom: Annotate d3_sts register bit defines
clk: x86: Move clk-pmc-atom register defines to include/linux/platform_data/x86/pmc_atom.h
platform/x86: make fw_attr_class constant
platform/x86/intel/tpmi: Change vsec offset to u64
platform/x86: intel_scu_pcidrv: Remove unused intel-mid.h
platform/x86: intel_scu_wdt: Remove unused intel-mid.h
...
|
|
When running as PVH or HVM Linux will use holes in the memory map as scratch
space to map grants, foreign domain pages and possibly miscellaneous other
stuff. However the usage of such memory map holes for Xen purposes can be
problematic. The request of holesby Xen happen quite early in the kernel boot
process (grant table setup already uses scratch map space), and it's possible
that by then not all devices have reclaimed their MMIO space. It's not
unlikely for chunks of Xen scratch map space to end up using PCI bridge MMIO
window memory, which (as expected) causes quite a lot of issues in the system.
At least for PVH dom0 we have the possibility of using regions marked as
UNUSABLE in the e820 memory map. Either if the region is UNUSABLE in the
native memory map, or it has been converted into UNUSABLE in order to hide RAM
regions from dom0, the second stage translation page-tables can populate those
areas without issues.
PV already has this kind of logic, where the balloon driver is inflated at
boot. Re-use the current logic in order to also inflate it when running as
PVH. onvert UNUSABLE regions up to the ratio specified in EXTRA_MEM_RATIO to
RAM, while reserving them using xen_add_extra_mem() (which is also moved so
it's no longer tied to CONFIG_PV).
[jgross: fixed build for CONFIG_PVH without CONFIG_XEN_PVH]
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240220174341.56131-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
For the Bay Trail or Cherry Trail SoC to enter the S0i3 power-level
at s2idle suspend requires most of the hw-blocks / devices in the SoC
to be in D3 when entering s2idle suspend.
If some devices are not in D3 then the SoC will stay in a higher
power state, consuming much more power from the battery then in S0i3.
Use the new acpi_s2idle_dev_ops and acpi_register_lps0_dev()
functionality to register a new s2idle check function which checks that
all hardware blocks in the North complex (controlled by Punit) are in
a state that allows the SoC to enter S0i3 and prints an error message
for any device in D0.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: "Borislav Petkov (AMD)" <bp@alien8.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[hdegoede: Use acpi_s2idle_dev_ops]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240305105915.76242-6-hdegoede@redhat.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Pull x86 build updates from Ingo Molnar:
- Reduce <asm/bootparam.h> dependencies
- Simplify <asm/efi.h>
- Unify *_setup_data definitions into <asm/setup_data.h>
- Reduce the size of <asm/bootparam.h>
* tag 'x86-build-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Do not include <asm/bootparam.h> in several files
x86/efi: Implement arch_ima_efi_boot_mode() in source file
x86/setup: Move internal setup_data structures into setup_data.h
x86/setup: Move UAPI setup structures into setup_data.h
|
|
Now that all platforms have the new split SMP configuration callbacks set
up, flip the switch and remove the old callback pointer and mop up the
platform code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.870883080@linutronix.de
|
|
Initialize the split SMP configuration callbacks with NOOPs as MID is
strictly ACPI only.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240212154639.620189339@linutronix.de
|
|
Select x86_dtb_parse_smp_config() as SMP configuration parser in
preparation of splitting up the get_smp_config() callback.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.558085053@linutronix.de
|
|
MPTABLE is no longer the default SMP configuration mechanism. Rename it to
mpparse_find_mptable() because that's what it does.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.306287711@linutronix.de
|
|
There is no point to do that. The ATOMs have an XAPIC for which this
function is a pointless exercise.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154638.931617775@linutronix.de
|
|
Remove the include statement for <asm/bootparam.h> from several files
that don't require it and limit the exposure of those definitions within
the Linux kernel code.
[ bp: Massage commit message. ]
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240112095000.8952-5-tzimmermann@suse.de
|
|
The x86 implementation of arch_ima_efi_boot_mode() uses the global
boot_param state. Move it into a source file to clean up the header.
Avoid potential rebuilds of unrelated source files if boot_params
changes.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240112095000.8952-4-tzimmermann@suse.de
|
|
Pull x86 cleanups from Ingo Molnar:
- Change global variables to local
- Add missing kernel-doc function parameter descriptions
- Remove unused parameter from a macro
- Remove obsolete Kconfig entry
- Fix comments
- Fix typos, mostly scripted, manually reviewed
and a micro-optimization got misplaced as a cleanup:
- Micro-optimize the asm code in secondary_startup_64_no_verify()
* tag 'x86-cleanups-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arch/x86: Fix typos
x86/head_64: Use TESTB instead of TESTL in secondary_startup_64_no_verify()
x86/docs: Remove reference to syscall trampoline in PTI
x86/Kconfig: Remove obsolete config X86_32_SMP
x86/io: Remove the unused 'bw' parameter from the BUILDIO() macro
x86/mtrr: Document missing function parameters in kernel-doc
x86/setup: Make relocated_ramdisk a local variable of relocate_initrd()
|
|
Pull x86 asm updates from Ingo Molnar:
"Replace magic numbers in GDT descriptor definitions & handling:
- Introduce symbolic names via macros for descriptor
types/fields/flags, and then use these symbolic names.
- Clean up definitions a bit, such as GDT_ENTRY_INIT()
- Fix/clean up details that became visibly inconsistent after the
symbol-based code was introduced:
- Unify accessed flag handling
- Set the D/B size flag consistently & according to the HW
specification"
* tag 'x86-asm-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Add DB flag to 32-bit percpu GDT entry
x86/asm: Always set A (accessed) flag in GDT descriptors
x86/asm: Replace magic numbers in GDT descriptors, script-generated change
x86/asm: Replace magic numbers in GDT descriptors, preparations
x86/asm: Provide new infrastructure for GDT descriptors
|
|
Fix typos, most reported by "codespell arch/x86". Only touches comments,
no code changes.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240103004011.1758650-1-helgaas@kernel.org
|
|
Actually replace the numeric values by the new symbolic values.
I used this to find all the existing users of the GDT_ENTRY*() macros:
$ git grep -P 'GDT_ENTRY(_INIT)?\('
Some of the lines will exceed 80 characters, but some of them will be
shorter again in the next couple of patches.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231219151200.2878271-4-vegard.nossum@oracle.com
|
|
We'd like to replace all the magic numbers in various GDT descriptors
with new, semantically meaningful, symbolic values.
In order to be able to verify that the change doesn't cause any actual
changes to the compiled binary code, I've split the change into two
patches:
- Part 1 (this commit): everything _but_ actually replacing the numbers
- Part 2 (the following commit): _only_ replacing the numbers
The reason we need this split for verification is that including new
headers causes some spurious changes to the object files, mostly line
number changes in the debug info but occasionally other subtle codegen
changes.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231219151200.2878271-3-vegard.nossum@oracle.com
|
|
This field is set to APIC_DELIVERY_MODE_FIXED in all cases, and is read
exactly once. Fold the constant in uv_program_mmr() and drop the field.
Searching for the origin of the stale HyperV comment reveals commit
a31e58e129f7 ("x86/apic: Switch all APICs to Fixed delivery mode") which
notes:
As a consequence of this change, the apic::irq_delivery_mode field is
now pointless, but this needs to be cleaned up in a separate patch.
6 years is long enough for this technical debt to have survived.
[ bp: Fold in
https://lore.kernel.org/r/20231121123034.1442059-1-andrew.cooper3@citrix.com
]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20231102-x86-apic-v1-1-bf049a2a0ed6@citrix.com
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
Found with Coccinelle:
https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Add __counted_by for struct uv_rtc_timer_head.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175151.work.118-kees@kernel.org
|
|
Rework NMI "action" modparam handling:
- Replace the uv_nmi_action string with an enum; and
- Use sysfs_match_string() for string parsing in param_set_action()
No change in functionality intended.
Suggested-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230916130653.243532-1-hdegoede@redhat.com
|
|
Only the arch_efi_call_virt() macro that some architectures override
needs to be a macro, given that it is variadic and encapsulates calls
via function pointers that have different prototypes.
The associated setup and teardown code are not special in this regard,
and don't need to be instantiated at each call site. So turn them into
ordinary C functions and move them out of line.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Pull x86 apic updates from Dave Hansen:
"This includes a very thorough rework of the 'struct apic' handlers.
Quite a variety of them popped up over the years, especially in the
32-bit days when odd apics were much more in vogue.
The end result speaks for itself, which is a removal of a ton of code
and static calls to replace indirect calls.
If there's any breakage here, it's likely to be around the 32-bit
museum pieces that get light to no testing these days.
Summary:
- Rework apic callbacks, getting rid of unnecessary ones and
coalescing lots of silly duplicates.
- Use static_calls() instead of indirect calls for apic->foo()
- Tons of cleanups an crap removal along the way"
* tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
x86/apic: Turn on static calls
x86/apic: Provide static call infrastructure for APIC callbacks
x86/apic: Wrap IPI calls into helper functions
x86/apic: Mark all hotpath APIC callback wrappers __always_inline
x86/xen/apic: Mark apic __ro_after_init
x86/apic: Convert other overrides to apic_update_callback()
x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb()
x86/apic: Provide apic_update_callback()
x86/xen/apic: Use standard apic driver mechanism for Xen PV
x86/apic: Provide common init infrastructure
x86/apic: Wrap apic->native_eoi() into a helper
x86/apic: Nuke ack_APIC_irq()
x86/apic: Remove pointless arguments from [native_]eoi_write()
x86/apic/noop: Tidy up the code
x86/apic: Remove pointless NULL initializations
x86/apic: Sanitize APIC ID range validation
x86/apic: Prepare x2APIC for using apic::max_apic_id
x86/apic: Simplify X2APIC ID validation
x86/apic: Add max_apic_id member
x86/apic: Wrap APIC ID validation into an inline
...
|
|
Pull misc x86 cleanups from Ingo Molnar:
"The following commit deserves special mention:
22dc02f81cddd Revert "sched/fair: Move unused stub functions to header"
This is in x86/cleanups, because the revert is a re-application of a
number of cleanups that got removed inadvertedly"
[ This also effectively undoes the amd_check_microcode() microcode
declaration change I had done in my microcode loader merge in commit
42a7f6e3ffe0 ("Merge tag 'x86_microcode_for_v6.6_rc1' [...]").
I picked the declaration change by Arnd from this branch instead,
which put it in <asm/processor.h> instead of <asm/microcode.h> like I
had done in my merge resolution - Linus ]
* tag 'x86-cleanups-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/uv: Refactor code using deprecated strncpy() interface to use strscpy()
x86/hpet: Refactor code using deprecated strncpy() interface to use strscpy()
x86/platform/uv: Refactor code using deprecated strcpy()/strncpy() interfaces to use strscpy()
x86/qspinlock-paravirt: Fix missing-prototype warning
x86/paravirt: Silence unused native_pv_lock_init() function warning
x86/alternative: Add a __alt_reloc_selftest() prototype
x86/purgatory: Include header for warn() declaration
x86/asm: Avoid unneeded __div64_32 function definition
Revert "sched/fair: Move unused stub functions to header"
x86/apic: Hide unused safe_smp_processor_id() on 32-bit UP
x86/cpu: Fix amd_check_microcode() declaration
|
|
Both `strncpy` and `strcpy` are deprecated for use on NUL-terminated
destination strings [1].
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on its destination buffer argument which is
_not_ the case for `strncpy` or `strcpy`!
In this case, we can drop both the forced NUL-termination and the `... -1` from:
| strncpy(arg, val, ACTION_LEN - 1);
as `strscpy` implicitly has this behavior.
Also include slight refactor to code removing possible new-line chars as
per Yang Yang's work at [3]. This reduces code size and complexity by
using more robust and better understood interfaces.
Co-developed-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dimitri Sivanich <sivanich@hpe.com>
Link: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings[1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://lore.kernel.org/all/202212091545310085328@zte.com.cn/ [3]
Link: https://github.com/KSPP/linux/issues/90
Link: https://lore.kernel.org/r/20230824-strncpy-arch-x86-platform-uv-uv_nmi-v2-1-e16d9a3ec570@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Move them to one place so the static call conversion gets simpler.
No functional change.
[ dhansen: merge against recent x86/apic changes ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
Rename send_cleanup_vector() to vector_schedule_cleanup() to prepare for
replacing the vector cleanup IPI with a timer callback.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20230621171248.6805-2-xin3.li@intel.com
|
|
Remove kernel-doc warnings:
arch/x86/platform/efi/memmap.c:94: warning: Function parameter or member
'data' not described in 'efi_memmap_install'
arch/x86/platform/efi/memmap.c:94: warning: Excess function parameter
'ctx' description in 'efi_memmap_install'
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Pull x86 fix from Thomas Gleixner:
"A single regression fix for x86:
Moving the invocation of arch_cpu_finalize_init() earlier in the boot
process caused a boot regression on IBT enabled system.
The root cause is not the move of arch_cpu_finalize_init() itself. The
system fails to boot because the subsequent efi_enter_virtual_mode()
code has a non-IBT safe EFI call inside. This was not noticed before
because IBT was enabled after the EFI initialization.
Switching the EFI call to use the IBT safe wrapper cures the problem"
* tag 'x86-urgent-2023-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Make efi_set_virtual_address_map IBT safe
|
|
Pull EFI updates from Ard Biesheuvel:
"Although some more stuff is brewing, the EFI changes that are ready
for mainline are few this cycle:
- improve the PCI DMA paranoia logic in the EFI stub
- some constification changes
- add statfs support to efivarfs
- allow user space to enumerate updatable firmware resources without
CAP_SYS_ADMIN"
* tag 'efi-next-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/libstub: Disable PCI DMA before grabbing the EFI memory map
efi/esrt: Allow ESRT access without CAP_SYS_ADMIN
efivarfs: expose used and total size
efi: make kobj_type structure constant
efi: x86: make kobj_type structure constant
|
|
Niklāvs reported a boot regression on an Alderlake machine and bisected it
to commit 9df9d2f0471b ("init: Invoke arch_cpu_finalize_init() earlier").
By moving the invocation of arch_cpu_finalize_init() further down he
identified that efi_enter_virtual_mode() is the function which causes the
boot hang.
The main difference of the earlier invocation is that the boot CPU is
already fully initialized and mitigations and alternatives are applied.
But the only really interesting change turned out to be IBT, which is now
enabled before efi_enter_virtual_mode(). "ibt=off" on the kernel command
line cured the problem.
Inspection of the involved calls in efi_enter_virtual_mode() unearthed that
efi_set_virtual_address_map() is the only place in the kernel which invokes
an EFI call without the IBT safe wrapper. This went obviously unnoticed so
far as IBT was enabled later.
Use arch_efi_call_virt() instead of efi_call() to cure that.
Fixes: fe379fa4d199 ("x86/ibt: Disable IBT around firmware")
Fixes: 9df9d2f0471b ("init: Invoke arch_cpu_finalize_init() earlier")
Reported-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217602
Link: https://lore.kernel.org/r/87jzvm12q0.ffs@tglx
|
|
Pull x86 cleanups from Dave Hansen:
"As usual, these are all over the map. The biggest cluster is work from
Arnd to eliminate -Wmissing-prototype warnings:
- Address -Wmissing-prototype warnings
- Remove repeated 'the' in comments
- Remove unused current_untag_mask()
- Document urgent tip branch timing
- Clean up MSR kernel-doc notation
- Clean up paravirt_ops doc
- Update Srivatsa S. Bhat's maintained areas
- Remove unused extern declaration acpi_copy_wakeup_routine()"
* tag 'x86_cleanups_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/acpi: Remove unused extern declaration acpi_copy_wakeup_routine()
Documentation: virt: Clean up paravirt_ops doc
x86/mm: Remove unused current_untag_mask()
x86/mm: Remove repeated word in comments
x86/lib/msr: Clean up kernel-doc notation
x86/platform: Avoid missing-prototype warnings for OLPC
x86/mm: Add early_memremap_pgprot_adjust() prototype
x86/usercopy: Include arch_wb_cache_pmem() declaration
x86/vdso: Include vdso/processor.h
x86/mce: Add copy_mc_fragile_handle_tail() prototype
x86/fbdev: Include asm/fb.h as needed
x86/hibernate: Declare global functions in suspend.h
x86/entry: Add do_SYSENTER_32() prototype
x86/quirks: Include linux/pnp.h for arch_pnpbios_disabled()
x86/mm: Include asm/numa.h for set_highmem_pages_init()
x86: Avoid missing-prototype warnings for doublefault code
x86/fpu: Include asm/fpu/regset.h
x86: Add dummy prototype for mk_early_pgtbl_32()
x86/pci: Mark local functions as 'static'
x86/ftrace: Move prepare_ftrace_return prototype to header
...
|
|
efi_config_parse_tables() reserves memory that holds unaccepted memory
configuration table so it won't be reused by page allocator.
Core-mm requires few helpers to support unaccepted memory:
- accept_memory() checks the range of addresses against the bitmap and
accept memory if needed.
- range_contains_unaccepted_memory() checks if anything within the
range requires acceptance.
Architectural code has to provide efi_get_unaccepted_table() that
returns pointer to the unaccepted memory configuration table.
arch_accept_memory() handles arch-specific part of memory acceptance.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230606142637.5171-6-kirill.shutemov@linux.intel.com
|
|
There are two functions in the olpc platform that have no prototype:
arch/x86/platform/olpc/olpc_dt.c:237:13: error: no previous prototype for 'olpc_dt_fixup' [-Werror=missing-prototypes]
arch/x86/platform/olpc/olpc-xo1-pm.c:73:26: error: no previous prototype for 'xo1_do_sleep' [-Werror=missing-prototypes]
The first one should just be marked 'static' as there are no other
callers, while the second one is called from assembler and is
just a false-positive warning that can be silenced by adding a
prototype.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/all/20230516193549.544673-21-arnd%40kernel.org
|
|
When writing EFI variables, one might get errors with no other message
on why it fails. Being able to see how much is used by EFI variables
helps analyzing such issues.
Since this is not a conventional filesystem, block size is intentionally
set to 1 instead of PAGE_SIZE.
x86 quirks of reserved size are taken into account; so that available
and free size can be different, further helping debugging space issues.
With this patch, one can see the remaining space in EFI variable storage
via efivarfs, like this:
$ df -h /sys/firmware/efi/efivars/
Filesystem Size Used Avail Use% Mounted on
efivarfs 176K 106K 66K 62% /sys/firmware/efi/efivars
Signed-off-by: Anisse Astier <an.astier@criteo.com>
[ardb: - rename efi_reserved_space() to efivar_reserved_space()
- whitespace/coding style tweaks]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
|
|
Move the x86 documentation under Documentation/arch/ as a way of cleaning
up the top-level directory and making the structure of our docs more
closely match the structure of the source directories it describes.
All in-kernel references to the old paths have been updated.
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-arch@vger.kernel.org
Cc: x86@kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20230315211523.108836-1-corbet@lwn.net/
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Mark reported that the ORC unwinder incorrectly marks an unwind as
reliable when the unwind terminates prematurely in the dark corners of
return_to_handler() due to lack of information about the next frame.
The problem is UNWIND_HINT_EMPTY is used in two different situations:
1) The end of the kernel stack unwind before hitting user entry, boot
code, or fork entry
2) A blind spot in ORC coverage where the unwinder has to bail due to
lack of information about the next frame
The ORC unwinder has no way to tell the difference between the two.
When it encounters an undefined stack state with 'end=1', it blindly
marks the stack reliable, which can break the livepatch consistency
model.
Fix it by splitting UNWIND_HINT_EMPTY into UNWIND_HINT_UNDEFINED and
UNWIND_HINT_END_OF_STACK.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/fd6212c8b450d3564b855e1cb48404d6277b4d9f.1677683419.git.jpoimboe@kernel.org
|
|
Pull EFI updates from Ard Biesheuvel:
"A healthy mix of EFI contributions this time:
- Performance tweaks for efifb earlycon (Andy)
- Preparatory refactoring and cleanup work in the efivar layer, which
is needed to accommodate the Snapdragon arm64 laptops that expose
their EFI variable store via a TEE secure world API (Johan)
- Enhancements to the EFI memory map handling so that Xen dom0 can
safely access EFI configuration tables (Demi Marie)
- Wire up the newly introduced IBT/BTI flag in the EFI memory
attributes table, so that firmware that is generated with ENDBR/BTI
landing pads will be mapped with enforcement enabled
- Clean up how we check and print the EFI revision exposed by the
firmware
- Incorporate EFI memory attributes protocol definition and wire it
up in the EFI zboot code (Evgeniy)
This ensures that these images can execute under new and stricter
rules regarding the default memory permissions for EFI page
allocations (More work is in progress here)
- CPER header cleanup (Dan Williams)
- Use a raw spinlock to protect the EFI runtime services stack on
arm64 to ensure the correct semantics under -rt (Pierre)
- EFI framebuffer quirk for Lenovo Ideapad (Darrell)"
* tag 'efi-next-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3
arm64: efi: Make efi_rt_lock a raw_spinlock
efi: Add mixed-mode thunk recipe for GetMemoryAttributes
efi: x86: Wire up IBT annotation in memory attributes table
efi: arm64: Wire up BTI annotation in memory attributes table
efi: Discover BTI support in runtime services regions
efi/cper, cxl: Remove cxl_err.h
efi: Use standard format for printing the EFI revision
efi: Drop minimum EFI version check at boot
efi: zboot: Use EFI protocol to remap code/data with the right attributes
efi/libstub: Add memory attribute protocol definitions
efi: efivars: prevent double registration
efi: verify that variable services are supported
efivarfs: always register filesystem
efi: efivars: add efivars printk prefix
efi: Warn if trying to reserve memory under Xen
efi: Actually enable the ESRT under Xen
efi: Apply allowlist to EFI configuration tables when running under Xen
efi: xen: Implement memory descriptor lookup based on hypercall
efi: memmap: Disregard bogus entries instead of returning them
...
|
|
Use the irq_domain_create_hierarchy() helper to create the hierarchical
domain, which both serves as documentation and avoids poking at
irqdomain internals.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-14-johan+linaro@kernel.org
|
|
UEFI v2.10 extends the EFI memory attributes table with a flag that
indicates whether or not all RuntimeServicesCode regions were
constructed with ENDBR landing pads, permitting the OS to map these
regions with IBT restrictions enabled.
So let's take this into account on x86 as well.
Suggested-by: Peter Zijlstra <peterz@infradead.org> # ibt_save() changes
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Add the generic plumbing to detect whether or not the runtime code
regions were constructed with BTI/IBT landing pads by the firmware,
permitting the OS to enable enforcement when mapping these regions into
the OS's address space.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
We currently pass a minimum major version to the generic EFI helper that
checks the system table magic and version, and refuse to boot if the
value is lower.
The motivation for this check is unknown, and even the code that uses
major version 2 as the minimum (ARM, arm64 and RISC-V) should make it
past this check without problems, and boot to a point where we have
access to a console or some other means to inform the user that the
firmware's major revision number made us unhappy. (Revision 2.0 of the
UEFI specification was released in January 2006, whereas ARM, arm64 and
RISC-V support where added in 2009, 2013 and 2017, respectively, so
checking for major version 2 or higher is completely arbitrary)
So just drop the check.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Squash portdrv_{core,pci}.c into portdrv.c to ease maintenance and
make more things static.
- Make portdrv bind to Switch Ports that have AER. Previously, if
these Ports lacked MSI/MSI-X, portdrv failed to bind, which meant
the Ports couldn't be suspended to low-power states. AER on these
Ports doesn't use interrupts, and the AER driver doesn't need to
claim them.
- Assign PCI domain IDs using ida_alloc(), which makes host bridge
add/remove work better.
Resource management:
- To work better with recent BIOSes that use EfiMemoryMappedIO for
PCI host bridge apertures, remove those regions from the E820 map
(E820 entries normally prevent us from allocating BARs). In v5.19,
we added some quirks to disable E820 checking, but that's not very
maintainable. EfiMemoryMappedIO means the OS needs to map the
region for use by EFI runtime services; it shouldn't prevent OS
from using it.
PCIe native device hotplug:
- Build pciehp by default if USB4 is enabled, since Thunderbolt/USB4
PCIe tunneling depends on native PCIe hotplug.
- Enable Command Completed Interrupt only if supported to avoid user
confusion from lspci output that says this is enabled but not
supported.
- Prevent pciehp from binding to Switch Upstream Ports; this happened
because of interaction with acpiphp and caused devices below the
Upstream Port to disappear.
Power management:
- Convert AGP drivers to generic power management. We hope to remove
legacy power management from the PCI core eventually.
Virtualization:
- Fix pci_device_is_present(), which previously always returned
"false" for VFs, causing virtio hangs when unbinding the driver.
Miscellaneous:
- Convert drivers to gpiod API to prepare for dropping some legacy
code.
- Fix DOE fencepost error for the maximum data object length.
Baikal-T1 PCIe controller driver:
- Add driver and DT bindings.
Broadcom STB PCIe controller driver:
- Enable Multi-MSI.
- Delay 100ms after PERST# deassert to allow power and clocks to
stabilize.
- Configure Read Completion Boundary to 64 bytes.
Freescale i.MX6 PCIe controller driver:
- Initialize PHY before deasserting core reset to fix a regression in
v6.0 on boards where the PHY provides the reference.
- Fix imx6sx and imx8mq clock names in DT schema.
Intel VMD host bridge driver:
- Fix Secondary Bus Reset on VMD bridges, which allows reset of NVMe
SSDs in VT-d pass-through scenarios.
- Disable MSI remapping, which gets re-enabled by firmware during
suspend/resume.
MediaTek PCIe Gen3 controller driver:
- Add MT7986 and MT8195 support.
Qualcomm PCIe controller driver:
- Add SC8280XP/SA8540P basic interconnect support.
Rockchip DesignWare PCIe controller driver:
- Base DT schema on common Synopsys schema.
Synopsys DesignWare PCIe core:
- Collect DT items shared between Root Port and Endpoint (PERST GPIO,
PHY info, clocks, resets, link speed, number of lanes, number of
iATU windows, interrupt info, etc) to snps,dw-pcie-common.yaml.
- Add dma-ranges support for Root Ports and Endpoints.
- Consolidate DT resource retrieval for "dbi", "dbi2", "atu", etc. to
reduce code duplication.
- Add generic names for clocks and resets to encourage more
consistent naming across drivers using DesignWare IP.
- Stop advertising PTM Responder role for Endpoints, which aren't
allowed to be responders.
TI J721E PCIe driver:
- Add j721s2 host mode ID to DT schema.
- Add interrupt properties to DT schema.
Toshiba Visconti PCIe controller driver:
- Fix interrupts array max constraints in DT schema"
* tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (95 commits)
x86/PCI: Use pr_info() when possible
x86/PCI: Fix log message typo
x86/PCI: Tidy E820 removal messages
PCI: Skip allocate_resource() if too little space available
efi/x86: Remove EfiMemoryMappedIO from E820 map
PCI/portdrv: Allow AER service only for Root Ports & RCECs
PCI: xilinx-nwl: Fix coding style violations
PCI: mvebu: Switch to using gpiod API
PCI: pciehp: Enable Command Completed Interrupt only if supported
PCI: aardvark: Switch to using devm_gpiod_get_optional()
dt-bindings: PCI: mediatek-gen3: add support for mt7986
dt-bindings: PCI: mediatek-gen3: add SoC based clock config
dt-bindings: PCI: qcom: Allow 'dma-coherent' property
PCI: mt7621: Add sentinel to quirks table
PCI: vmd: Fix secondary bus reset for Intel bridges
PCI: endpoint: pci-epf-vntb: Fix sparse ntb->reg build warning
PCI: endpoint: pci-epf-vntb: Fix sparse build warning for epf_db
PCI: endpoint: pci-epf-vntb: Replace hardcoded 4 with sizeof(u32)
PCI: endpoint: pci-epf-vntb: Remove unused epf_db_phy struct member
PCI: endpoint: pci-epf-vntb: Fix call pci_epc_mem_free_addr() in error path
...
|
|
Pull EFI updates from Ard Biesheuvel:
"Another fairly sizable pull request, by EFI subsystem standards.
Most of the work was done by me, some of it in collaboration with the
distro and bootloader folks (GRUB, systemd-boot), where the main focus
has been on removing pointless per-arch differences in the way EFI
boots a Linux kernel.
- Refactor the zboot code so that it incorporates all the EFI stub
logic, rather than calling the decompressed kernel as a EFI app.
- Add support for initrd= command line option to x86 mixed mode.
- Allow initrd= to be used with arbitrary EFI accessible file systems
instead of just the one the kernel itself was loaded from.
- Move some x86-only handling and manipulation of the EFI memory map
into arch/x86, as it is not used anywhere else.
- More flexible handling of any random seeds provided by the boot
environment (i.e., systemd-boot) so that it becomes available much
earlier during the boot.
- Allow improved arch-agnostic EFI support in loaders, by setting a
uniform baseline of supported features, and adding a generic magic
number to the DOS/PE header. This should allow loaders such as GRUB
or systemd-boot to reduce the amount of arch-specific handling
substantially.
- (arm64) Run EFI runtime services from a dedicated stack, and use it
to recover from synchronous exceptions that might occur in the
firmware code.
- (arm64) Ensure that we don't allocate memory outside of the 48-bit
addressable physical range.
- Make EFI pstore record size configurable
- Add support for decoding CXL specific CPER records"
* tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (43 commits)
arm64: efi: Recover from synchronous exceptions occurring in firmware
arm64: efi: Execute runtime services from a dedicated stack
arm64: efi: Limit allocations to 48-bit addressable physical region
efi: Put Linux specific magic number in the DOS header
efi: libstub: Always enable initrd command line loader and bump version
efi: stub: use random seed from EFI variable
efi: vars: prohibit reading random seed variables
efi: random: combine bootloader provided RNG seed with RNG protocol output
efi/cper, cxl: Decode CXL Error Log
efi/cper, cxl: Decode CXL Protocol Error Section
efi: libstub: fix efi_load_initrd_dev_path() kernel-doc comment
efi: x86: Move EFI runtime map sysfs code to arch/x86
efi: runtime-maps: Clarify purpose and enable by default for kexec
efi: pstore: Add module parameter for setting the record size
efi: xen: Set EFI_PARAVIRT for Xen dom0 boot on all architectures
efi: memmap: Move manipulation routines into x86 arch tree
efi: memmap: Move EFI fake memmap support into x86 arch tree
efi: libstub: Undeprecate the command line initrd loader
efi: libstub: Add mixed mode support to command line initrd loader
efi: libstub: Permit mixed mode return types other than efi_status_t
...
|
|
Firmware can use EfiMemoryMappedIO to request that MMIO regions be mapped
by the OS so they can be accessed by EFI runtime services, but should have
no other significance to the OS (UEFI r2.10, sec 7.2). However, most
bootloaders and EFI stubs convert EfiMemoryMappedIO regions to
E820_TYPE_RESERVED entries, which prevent Linux from allocating space from
them (see remove_e820_regions()).
Some platforms use EfiMemoryMappedIO entries for PCI MMCONFIG space and PCI
host bridge windows, which means Linux can't allocate BAR space for
hot-added devices.
Remove large EfiMemoryMappedIO regions from the E820 map to avoid this
problem.
Leave small (< 256KB) EfiMemoryMappedIO regions alone because on some
platforms, these describe non-window space that's included in host bridge
_CRS. If we assign that space to PCI devices, they don't work. On the
Lenovo X1 Carbon, this leads to suspend/resume failures.
The previous solution to the problem of allocating BARs in these regions
was to add pci_crs_quirks[] entries to disable E820 checking for these
machines (see d341838d776a ("x86/PCI: Disable E820 reserved region clipping
via quirks")):
Acer DMI_PRODUCT_NAME Spin SP513-54N
Clevo DMI_BOARD_NAME X170KM-G
Lenovo DMI_PRODUCT_VERSION *IIL*
Florent reported the BAR allocation issue on the Clevo NL4XLU. We could
add another quirk for the NL4XLU, but I hope this generic change can solve
it for many machines without having to add quirks.
This change has been tested on Clevo X170KM-G (Konrad) and Lenovo Ideapad
Slim 3 (Matt) and solves the problem even when overriding the existing
quirks by booting with "pci=use_e820".
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216565 Clevo NL4XLU
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206459#c78 Clevo X170KM-G
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1868899 Ideapad Slim 3
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2029207 X1 Carbon
Link: https://lore.kernel.org/r/20221208190341.1560157-2-helgaas@kernel.org
Reported-by: Florent DELAHAYE <kernelorg@undead.fr>
Tested-by: Konrad J Hambrick <kjhambrick@gmail.com>
Tested-by: Matt Hansen <2lprbe78@duck.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
|
|
For bus-based driver, device removal is implemented as:
1 device_remove()->
2 bus->remove()->
3 driver->remove()
Driver core needs no inform from callee(bus driver) about the
result of remove callback. In that case, commit fc7a6209d571
("bus: Make remove callback return void") forces bus_type::remove
be void-returned.
Now we have the situation that both 1 & 2 of calling chain are
void-returned, so it does not make much sense for 3(driver->remove)
to return non-void to its caller.
So the basic idea behind this change is making remove() callback of
any bus-based driver to be void-returned.
This change, for itself, is for device drivers based on acpi-bus.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for drivers/platform/surface/*
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The EFI runtime map code is only wired up on x86, which is the only
architecture that has a need for it in its implementation of kexec.
So let's move this code under arch/x86 and drop all references to it
from generic code. To ensure that the efi_runtime_map_init() is invoked
at the appropriate time use a 'sync' subsys_initcall() that will be
called right after the EFI initcall made from generic code where the
original invocation of efi_runtime_map_init() resided.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Dave Young <dyoung@redhat.com>
|
|
Currently, the EFI_PARAVIRT flag is only used by Xen dom0 boot on x86,
even though other architectures also support pseudo-EFI boot, where the
core kernel is invoked directly and provided with a set of data tables
that resemble the ones constructed by the EFI stub, which never actually
runs in that case.
Let's fix this inconsistency, and always set this flag when booting dom0
via the EFI boot path. Note that Xen on x86 does not provide the EFI
memory map in this case, whereas other architectures do, so move the
associated EFI_PARAVIRT check into the x86 platform code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The EFI memory map is a description of the memory layout as provided by
the firmware, and only x86 manipulates it in various different ways for
its own memory bookkeeping. So let's move the memmap routines that are
only used by x86 into the x86 arch tree.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
Linus Torvalds
Roger Pau Monne
Johannes Stezenbach
Thomas Gleixner
Thomas Zimmermann
Bjorn Helgaas
Vegard Nossum
Andrew Cooper
Kees Cook
Hans de Goede
Ard Biesheuvel
Justin Stitt
Dave Hansen
Zhu Wang
Kirill A. Shutemov
Arnd Bergmann
Anisse Astier
Thomas Weißschuh
Jonathan Corbet
Josh Poimboeuf
Johan Hovold
Dawei Li