aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/gpu/drm/amd/display/dmub/dmub_srv.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-05-13drm/amd/display: Fix race in dmub_srv_wait_for_pendingDillon Varone1-0/+14
[WHY] If commands are being submitted to DMCUB while concurrently waiting for pending commands to complete, rptr and wptr may never match again, and reported command count will not update. [HOW] Modify dmub_srv_wait_for_pending to constantly check wptr and rptr match, and update inbox status whenever a message is sent to avoid the race and determine message completion or idle as quickly as possible. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Only wait for required free space in DMUB mailboxDillon Varone1-0/+19
[WHY&HOW] When command submission is blocked by a full mailbox, only wait for enough space to free to submit the command, instead of waiting for idle. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: HDCP Locality check using DMUB Fused IODominik Kaszewski1-0/+2
[Why] HDCP locality check has strict timing requirements, currently broken due to reliance on msleep which does not guarantee accuracy. The PR moves the write-poll-read sequence into DMUB using new generic Fused IO interface, where the timing accuracy is greatly improved. New flow is enabled using DCN resource capability bit (none for now), or using a debug flag. [How] * Extended mod_hdcp_config with new function for requesting DMUB to execute a sequence of fused I2C/AUX commands and synchronously wait until an outbox reply arrives or a timeout expires. * If the timeout expires, send an abort to DMUB. * Update HDCP to use the DMUB for locality check if supported. * Add DC_HDCP_LC_FORCE_FW_ENABLE and DC_HDCP_LC_ENABLE_SW_FALLBACK. * Make the first enable new flow regardless of resource capabilities. * Make the second enable fallback to old SW flow. * Clean up makefile source file listings for easier updates. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Add Support for reg inbox0 for host->DMUB CMDsDillon Varone1-43/+89
[WHY] DCN4+ supports a new register based mailbox for sending messages from host to DMCUB. This mailbox supports 64 byte commands, which makes it compatible with the same structure as the frame buffer based mailbox. [HOW] The intention for reg_inbox0 is to be slot in replacement for the frame buffer based mailbox (Inbox1). It supports all of the required features: - Supports all messages handled by FB Inbox1 - Supports multi command batching Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Remove BW Allocation from DPIA notificationCruise1-4/+0
[Why] USB4 BW Allocation response will be handled in HPD IRQ. No need to handle it in DPIA notification callback. [How] Remove DP BW allocation response code in DPIA notification. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Cruise <Cruise.Hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amd/display: Revert "Support for reg inbox0 for host->DMUB CMDs"Dillon Varone1-89/+43
This reverts commit 15d1c2e6bf60511ba068d7d735d051911c6c5b92. Reason: Cursor movement causes system to hang. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Add Support for reg inbox0 for host->DMUB CMDsDillon Varone1-44/+89
[WHY] DCN4+ supports a new register based mailbox for sending messages from host to DMCUB. This mailbox supports 64 byte commands, which makes it compatible with the same structure as the frame buffer based mailbox. [HOW] The intention for reg_inbox0 is to be slot in replacement for the frame buffer based mailbox (Inbox1). It supports all of the required features: - Supports all messages handled by FB Inbox1 - Supports multi command batching Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Add more debug data to dmub_srvJoshua Aberback1-5/+5
[Why] When analyzing some crash dumps, not all of the expected DMUB info was available, so we want to add in-object storage for this data. [How] - dmub_srv_debug (renamed to dmub_timeout_info) is already a member of dmub_diagnostic_data, therefore keep a dmub_diagnostic_data directly in dmub_srv - use dmub_srv->debug when collecting diagnostic info instead of stack object to allow for easy inspection in crash dumps Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Add DCN36 version identifiersWayne Lin1-0/+1
Add DCN3.6 asic identifiers. Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/display: Make DMCUB tracebuffer debugfs chronologicalLeo Li1-0/+3
[Why] Previously, the debugfs did a simple dump of the tracebuffer region. Because the tracebuffer is a ring, it meant that the entries printed may not be in chronological order if the ring rolled over. This makes parsing the tracelog cumbersome. [How] Since dmcub provides the current entry count, use that to determine the latest tracelog entry and output the log chronologically. Also, the fb region size is not accurate of the actual tracebuffer size; it has been padded to alignment requirements. Use the tracebuffer size reported by the fw meta_info, if available. If not, a fallback to the hardcoded default is needed. To make this value available to other .c files, its define was moved to dmub_srv.h. Also, print a indicator at the start of the log if rollover occurred. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Add a boot option to reduce phy ssc for HBR3Hansen Dsouza1-0/+1
[Why] Spread on DPREFCLK by 0.3 percent can have a negative effect on sink when PHY SSC is also spread by 0.3 percent [How] Add boot option for DMU to lower PHY SSC Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: Add IPS residency capture helpers to dc_dmub_srvOvidiu Bunea1-0/+8
This enables starting and stopping IPS residency measurements and querying the IPS residency information consisting of residency percent, entry counter, total time active & inactive, and histograms for the specified IPS mode. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Restructure dpia link trainingPeichen Huang1-0/+1
[WHY] We intend to consolidate dp tunneling and conventional dp link training. [HOW] 1. Use the same link training entry for both dp and dpia 2. Move SET_CONFIG of non-transparent mode to dmub side 3. Add set_tps_notification dmub_cmd to notify tps request for non-transparent dpia link training 4. Check dpcd request result and abort link training early if dpia aux tunneling fails 5. Add option to avoid affect old product 6. Separately handle wait_time_microsec for dpia Reviewed-by: Cruise Hung <cruise.hung@amd.com> Reviewed-by: George Shen <george.shen@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: Add logs for debugging outboxCruise1-0/+3
The DP tunnel AUX reply is received through Outbox1. Print the Outbox1 status if an issue occurs. Signed-off-by: Cruise <Cruise.Hung@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Add debug option for disabling SLDO optimizationsNicholas Kazlauskas1-0/+1
[Why] DM can hook this up to disable SLDO optimizations in firmware during DMCUB initialization for debug purposes. [How] Add the option and pass it through dmub_srv. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Add outbox notification support for HPD redetectNicholas Kazlauskas1-0/+2
[Why] HPD sense changes can occur during low power states and need to be notified from firmware to driver. Upon notification the hotplug redetection routines should execute. [How] Add Support in DMUB srv and DMUB srv stat for receiving these notifications. DM can hook them up and process the HPD redetection once received. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Notify idle link detection through shared stateNicholas Kazlauskas1-0/+1
[Why] We can hang in IPS2 checking DMCUB_SCRATCH0 for link detection state. [How] Replace the HW access with a check on the shared state bit. This will work the same way as the SCRATCH0 but won't require a wake in the case where link detection isn't required. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amd/display: Add DCN401 dependant changes for DMCUBAurabindo Pillai1-8/+36
Update for DCN 4.0.1. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16drm/amd/display: Pass sequential ONO bit to DMCUB boot optionsNicholas Kazlauskas1-0/+1
[Why] IPS ono sequence ordering differs based on the ASIC. [How] Detect the ASIC ID revision and set the boot option accordingly. Feed it through the DCN35 DMUB functions. Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Add extra DMUB logging to track message timeoutAlvin Lee1-1/+16
[Description] - Add logging for first DMUB inbox message that timed out to diagnostic data - It is useful to track the first failed message for debug purposes because once DMUB becomes hung (typically on a message), it will remain hung and all subsequent messages. In these cases we're interested in knowing which is the first message that failed. Reviewed-by: Josip Pavic <josip.pavic@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amd/display: add DCN351 version identifiersHamza Mahfooz1-0/+1
Add DCN3.5.1 ASIC identifiers. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-14drm/amd/display: Add shared firmware state for DMUB IPS handshakeNicholas Kazlauskas1-1/+5
[Why] Read modify write hazards can occur when using a single shared scratch register between driver and firmware leading to driver accessing DCN in IPS2 and a system hang. [How] Add infrastructure for using REGION6 as a shared firmware state between driver and firmware. This region is uncachable. Replace the existing get/set idle calls with reads/writes to the (volatile) shared firmware state blocks that a separated by at least a cache line between firmware and driver. Remove the workarounds that required rewriting/checking read modify write hazards. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Drop legacy codeRodrigo Siqueira1-1/+0
Display code keeps getting improvements, and because of that, some legacy code is left behind. This commit drops some of those unused codes. Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: refine code for dmcub inbox1 ring buffer debugFudongwang1-4/+0
[Why] 1. To watch dmcub inbox1 ring buffer cmd type without tools 2. dmub_cmd_PLAT_54186_wa 66 bytes [How] Added dmcub cmd type enum: unsigned char for debug use only, also fixed 66 bytes issue by using unsigned int in bit define instead of unsigned char. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Fudongwang <fudong.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-22drm/amd/display: Add GART memory support for dmcubFudongwang1-4/+15
[Why] In dump file, GART memory can be accessed while frame buffer cannot. [How] Add GART memory support for dmcub. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Fudongwang <fudong.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: skip error logging when DMUB is inactive from S3Samson Tam1-0/+1
[Why] On resume from S3, while DMUB is inactive, DMUB queue and execute calls will not work. Skip reporting errors in these scenarios [How] Add new return code during DMUB queue and execute calls when DMUB is in S3 state. Skip logging errors in these scenarios Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-15drm/amd/display: do not send commands to DMUB if DMUB is inactive from S3Samson Tam1-0/+21
[Why] On resume from S3, may get apply_idle_optimizations call while DMUB is inactive which will just time out. [How] Set and track power state in dmub_srv and check power state before sending commands to DMUB. Add interface in both dmub_srv and dc_dmub_srv Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amd/display: Change the DMCUB mailbox memory location from FB to inboxLewis Huang1-8/+14
[WHY] Flush command sent to DMCUB spends more time for execution on a dGPU than on an APU. This causes cursor lag when using high refresh rate mouses. [HOW] 1. Change the DMCUB mailbox memory location from FB to inbox. 2. Only change windows memory to inbox. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Lewis Huang <lewis.huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Add DCN35 DMUBQingqing Zhuo1-0/+23
[Why & How] Add DMUB handling for DCN35. Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Skip dmub memory flush when not neededDillon Varone1-0/+8
[WHY&HOW] Readback is only necessary when loaded via CPU. Reviewed-by: Chris Park <chris.park@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Write flip addr to scratch reg for subvpAlvin Lee1-0/+17
[Description] SubVP needs to "calculate" the earliest in use META address by using the current primary / meta addresses, but this leads to a race condition where FW and driver can read/write the address at the same time and intermittently produce inconsistent address offsets. To mitigate this issue without locking (too slow), save each surface flip addr into scratch registers and use this to keep track of the earliest in use META addres. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Enable runtime register offset init for DCN32 DMUBAurabindo Pillai1-1/+3
[Why&How] DMUB subsystem was continuing to use compile time offset calculation for register access. Switch this to runtime calculation to stay consistent with rest of DC code. To enable this, an additional interface init_reg_offsets() are added to DMUB's hw_funcs struct. Asics with runtime register offset calculation enabled shall populate this hook with a fn pointer that will invoke the necessary macros to calculate the offset. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: Add interface to modify DMUB panel power optionsPaul Hsieh1-0/+3
[Why] This option can vary depending on the panel and may be required to be called during sink detection phase before transmitter control. [How] Allow modify the bit depending on the eDP panel connected with a new interface. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Add helpers to get DMUB FW boot optionsCruise Hung1-0/+4
[Why & How] To query the bits and print them out for debug purposes. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Cruise Hung <cruise.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-30drm/amd/display: Set minimum requirement for using PSR-SU on RembrandtMario Limonciello1-0/+2
A number of parade TCONs are causing system hangs when utilized with older DMUB firmware and PSR-SU. Some changes have been introduced into DMUB firmware to add resilience against these failures. Don't allow running PSR-SU unless on the newer firmware. Cc: stable@vger.kernel.org Cc: Sean Wang <sean.ns.wang@amd.com> Cc: Marc Rossi <Marc.Rossi@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2443 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-30drm/amd/display: Correct `DMUB_FW_VERSION` macroMario Limonciello1-1/+1
The `DMUB_FW_VERSION` macro has a mistake in that the revision field is off by one byte. The last byte is typically used for other purposes and not a revision. Cc: stable@vger.kernel.org Cc: Sean Wang <sean.ns.wang@amd.com> Cc: Marc Rossi <Marc.Rossi@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09Revert "drm/amd/display: cache trace buffer size"Leo Ma1-1/+0
Revert commit 257e9891db0b ("drm/amd/display: cache trace buffer size") to fix regression found in tests. Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: cache trace buffer sizeJosip Pavic1-0/+1
[Why & How] Cache the trace buffer size retrieved from DMUB FW in the driver Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Josip Pavic <josip.pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-24drm/amd/display: Add p-state debuggingSung Lee1-1/+2
[WHY] P-State related issues are fairly common but currently there is no way to debug these issues after the fact. [HOW] Add helpful registers to HW state queries Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Sung Lee <sunglee@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-24drm/amd/display: Restore rptr/wptr for DMCUB as workaroundJinZe.Xu1-0/+14
[Why] States may be desync after resume. [How] Sync sw state with hw state. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: add mechanism to skip DCN initEric Yang1-1/+0
[Why] If optimized init is done in FW. DCN init can be skipped in driver. This need to be communicated between driver and fw and maintain backwards compatibility. [How] Use DMUB scratch 0 bit 2 to indicate optimized init done in fw and use DMUB scatch 4 bit 0 to indicate drive supports the optimized flow so FW will perform it. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-22drm/amd/display: Add CRC and DMUB test supportCharlene Liu1-0/+2
[Why & How] - Add CRC for test support - Add params to allow control into to DMUB. Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd/display: Update dmub header to match DMUBMustapha Ghaddar1-1/+15
[WHY] Last PR missed name of a struct to match in DMUB [HOW] Update the logic in dmub_cmh.h header Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Add DPIA NOTIFICATION logicMustapha Ghaddar1-0/+3
[WHY] Adding the new DPIA NOTIFY packets from DMUB As per the design with Cruise to account for 250ms response delay otherwise [HOW] Added th DPIA NOTIFY logic as per DMUB logic Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: Display does not light up after S4 resumeMeenakshikumar Somasundaram1-0/+1
[Why] Dpia hpd interrupt processing is disabled when entering S4/S0i3 and would be reenabled after detection completes during resuming. Because, keeping hpd interrupts enabled during detection leads to multiple detections for the same hpd transition. There is a S4 case where dpia hpd interrupt is missed when driver is in transitioning from hpd interrupt processing disable to enable and the display does not light up. [How] - Added dmub inbox command DMUB_CMD__DPIA_HPD_INT_ENABLE to explicitly control dmub to issue dpia hpd interrupt or not. If dpia hpd interrupt is disabled, dmub will keep the hpd pending and post it once driver reenables dpia hpd interrupt or when querying with DMUB_CMD__QUERY_HPD_STATE. - Added dmub boot option dpia_hpd_int_enable_supported to notify dmub about whether DMUB_CMD__DPIA_HPD_INT_ENABLE command would be used. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: Add support for visual confirm colorLeo (Hanghong) Ma1-0/+1
[Why] We want to get the visual confirm color of the bottom-most pipe for test automation. [How] Save the visual confirm color to plane_state before program to MPC; Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-13drm/amd/display: Add DCN314 version identifiersRoman Li1-0/+1
DCN 3.1.4 version and family ids Signed-off-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add DMCUB source files and changes for DCN32/321Aurabindo Pillai1-0/+6
DMCUB is the display engine microcontroller which aids in modesetting and other display related features. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add DCN32/321 version identifiersAurabindo Pillai1-0/+2
Add DCN3.2 asic identifiers. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amd/display: Add Connection Manager boot option.Jimmy Kizito1-0/+1
[Why] Boot up behaviour may differ depending on the Connection Manager handling USB4 tunneling. [How] Send boot option to firmware to indicate Connection Manager. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.