| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The memory allocated for intr_ctrl_regset, which is passed to
debugfs_create_regset32() may not be cleaned up when the driver is
removed. Fix that by using device managed allocation for it.
Fixes: 45d76f492938 ("pds_core: set up device and adminq")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20250409054450.48606-1-abdun.nihaal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the debugfs_create_dir() never returns a null pointer, checking
the return value for a null pointer is redundant, and using IS_ERR is
safe enough.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://patch.msgid.link/20240903143343.2004652-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Running xmastree.py against the driver found some
RCT issues, so fix them.
Also, if allocating pdsc->intr_info in pdsc_dev_init()
fails the driver still tries to free pdsc->intr_info.
Fix this by just returning -ENOMEM since there's
nothing to free at this point of failure.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The notifyq rides on the adminq's interrupt, so there's
no need to setup and/or access the notifyq's interrupt
index or bound_intr. The driver sets the bound_intr
using qcq->intx = -1 for the notifyq, but luckily
nothing accesses that field for notifyq. Instead of
expecting that remains the case, just clean up
the notifyq's interrupt index and bound_intr fields.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently the teardown/setup flow for driver probe/remove is quite
a bit different from the reset flows in pdsc_fw_down()/pdsc_fw_up().
One key piece that's missing are the calls to pci_alloc_irq_vectors()
and pci_free_irq_vectors(). The pcie reset case is calling
pci_free_irq_vectors() on reset_prepare, but not calling the
corresponding pci_alloc_irq_vectors() on reset_done. This is causing
unexpected/unwanted interrupt behavior due to the adminq interrupt
being accidentally put into legacy interrupt mode. Also, the
pci_alloc_irq_vectors()/pci_free_irq_vectors() functions are being
called directly in probe/remove respectively.
Fix this inconsistency by making the following changes:
1. Always call pdsc_dev_init() in pdsc_setup(), which calls
pci_alloc_irq_vectors() and get rid of the now unused
pds_dev_reinit().
2. Always free/clear the pdsc->intr_info in pdsc_teardown()
since this structure will get re-alloced in pdsc_setup().
3. Move the calls of pci_free_irq_vectors() to pdsc_teardown()
since pci_alloc_irq_vectors() will always be called in
pdsc_setup()->pdsc_dev_init() for both the probe/remove and
reset flows.
4. Make sure to only create the debugfs "identity" entry when it
doesn't already exist, which it will in the reset case because
it's already been created in the initial call to pdsc_dev_init().
Fixes: ffa55858330f ("pds_core: implement pci reset handlers")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240129234035.69802-7-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Virtual Interfaces (VIFs) supported by the DSC's
configuration (vDPA, Eth, RDMA, etc) are reported in the
dev_ident struct and made visible in debugfs. At this point
only vDPA is supported in this driver so we only setup
devices for that feature.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set up the basic adminq and notifyq queue structures. These are
used mostly by the client drivers for feature configuration.
These are essentially the same adminq and notifyq as in the
ionic driver.
Part of this includes querying for device identity and FW
information, so we can make that available to devlink dev info.
$ devlink dev info pci/0000:b5:00.0
pci/0000:b5:00.0:
driver pds_core
serial_number FLM18420073
versions:
fixed:
asic.id 0x0
asic.rev 0x0
running:
fw 1.51.0-73
stored:
fw.goldfw 1.15.9-C-22
fw.mainfwa 1.60.0-73
fw.mainfwb 1.60.0-57
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The devcmd interface is the basic connection to the device through the
PCI BAR for low level identification and command services. This does
the early device initialization and finds the identity data, and adds
devcmd routines to be used by later driver bits.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is the initial PCI driver framework for the new pds_core device
driver and its family of devices. This does the very basics of
registering for the new PF PCI device 1dd8:100c, setting up debugfs
entries, and registering with devlink.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Abdun Nihaal
Li Zetao
Brett Creeley
Shannon Nelson