| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Expose the input bridge interface ethernet address so it can be used to
redirect the packet to the receiving physical device for processing.
Tested with nft command line tool.
table bridge nat {
chain PREROUTING {
type filter hook prerouting priority 0; policy accept;
ether daddr de:ad:00:00:be:ef meta pkttype set host ether daddr set meta ibrhwdr accept
}
}
Joint work with Pablo Neira.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
This new attribute is supposed to be used instead of NFTA_DEVICE_NAME
for simple wildcard interface specs. It holds a NUL-terminated string
representing an interface name prefix to match on.
While kernel code to distinguish full names from prefixes in
NFTA_DEVICE_NAME is simpler than this solution, reusing the existing
attribute with different semantics leads to confusion between different
versions of kernel and user space though:
* With old kernels, wildcards submitted by user space are accepted yet
silently treated as regular names.
* With old user space, wildcards submitted by kernel may cause crashes
since libnftnl expects NUL-termination when there is none.
Using a distinct attribute type sanitizes these situations as the
receiving part detects and rejects the unexpected attribute nested in
*_HOOK_DEVS attributes.
Fixes: 6d07a289504a ("netfilter: nf_tables: Support wildcard netdev hook specs")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Introduce NFNL_HOOK_TYPE_NFT_FLOWTABLE to distinguish flowtable hooks
from base chain ones. Nested attributes are shared with the old NFTABLES
hook info type since they fit apart from their misleading name.
Old nftables in user space will ignore this new hook type and thus
continue to print flowtable hooks just like before, e.g.:
| family netdev {
| hook ingress device test0 {
| 0000000000 nf_flow_offload_ip_hook [nf_flow_table]
| }
| }
With this patch in place and support for the new hook info type, output
becomes more useful:
| family netdev {
| hook ingress device test0 {
| 0000000000 flowtable ip mytable myft [nf_flow_table]
| }
| }
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This reverts commit 465b9ee0ee7bc268d7f261356afd6c4262e48d82.
Such notifications fit better into core or nfnetlink_hook code,
following the NFNL_MSG_HOOK_GET message format.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Notify user space if netdev hooks are updated due to netdev add/remove
events. Send minimal notification messages by introducing
NFT_MSG_NEWDEV/DELDEV message types describing a single device only.
Upon NETDEV_CHANGENAME, the callback has no information about the
interface's old name. To provide a clear message to user space, include
the hook's stored interface name in the notification.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add the minimal relevant info needed for userspace ("nftables monitor
trace") to provide the conntrack view of the packet:
- state (new, related, established)
- direction (original, reply)
- status (e.g., if connection is subject to dnat)
- id (allows to query ctnetlink for remaining conntrack state info)
Example:
trace id a62 inet filter PRE_RAW packet: iif "enp0s3" ether [..]
[..]
trace id a62 inet filter PRE_MANGLE conntrack: ct direction original ct state new ct id 32
trace id a62 inet filter PRE_MANGLE packet: [..]
[..]
trace id a62 inet filter IN conntrack: ct direction original ct state new ct status dnat-done ct id 32
[..]
In this case one can see that while NAT is active, the new connection
isn't subject to a translation.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nf_tables picks a suitable set backend implementation (bitmap, hash,
rbtree..) based on the userspace requirements.
Figuring out the chosen backend requires information about the set flags
and the kernel version. Export this to userspace so nft can include this
information in '--debug=netlink' output.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Nadia Pinaeva writes:
I am working on a tool that allows collecting network performance
metrics by using conntrack events.
Start time of a conntrack entry is used to evaluate seen_reply
latency, therefore the sooner it is timestamped, the better the
precision is.
In particular, when using this tool to compare the performance of the
same feature implemented using iptables/nftables/OVS it is crucial
to have the entry timestamped earlier to see any difference.
At this time, conntrack events can only get timestamped at recv time in
userspace, so there can be some delay between the event being generated
and the userspace process consuming the message.
There is sys/net/netfilter/nf_conntrack_timestamp, which adds a
64bit timestamp (ns resolution) that records start and stop times,
but its not suited for this either, start time is the 'hashtable insertion
time', not 'conntrack allocation time'.
There is concern that moving the start-time moment to conntrack
allocation will add overhead in case of flooding, where conntrack
entries are allocated and released right away without getting inserted
into the hashtable.
Also, even if this was changed it would not with events other than
new (start time) and destroy (stop time).
Pablo suggested to add new CTA_TIMESTAMP_EVENT, this adds this feature.
The timestamp is recorded in case both events are requested and the
sys/net/netfilter/nf_conntrack_timestamp toggle is enabled.
Reported-by: Nadia Pinaeva <n.m.pinaeva@gmail.com>
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Hitherto, these operations have been converted in user space to
mask-and-xor operations on one register and two immediate values, and it
is the latter which have been evaluated by the kernel. We add support
for evaluating these operations directly in kernel space on one register
and either an immediate value or a second register.
Pablo made a few changes to the original patch:
- EINVAL if NFTA_BITWISE_SREG2 is used with fast version.
- Allow _AND,_OR,_XOR with _DATA != sizeof(u32)
- Dump _SREG2 or _DATA with _AND,_OR,_XOR
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In the next patch we add support for doing AND, OR and XOR operations
directly in the kernel, so rename some functions and an enum constant
related to mask-and-xor boolean operations.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Fix the comment which incorrectly defines it as NLA_U32.
Fixes: 3b49e2e94e6e ("netfilter: nf_tables: add flow table netlink frontend")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch uses zero as timeout marker for those elements that never expire
when the element is created.
If userspace provides no timeout for an element, then the default set
timeout applies. However, if no default set timeout is specified and
timeout flag is set on, then timeout extension is allocated and timeout
is set to zero to allow for future updates.
Use of zero a never timeout marker has been suggested by Phil Sutter.
Note that, in older kernels, it is already possible to define elements
that never expire by declaring a set with the set timeout flag set on
and no global set timeout, in this case, new element with no explicit
timeout never expire do not allocate the timeout extension, hence, they
never expire. This approach makes it complicated to accomodate element
timeout update, because element extensions do not support reallocations.
Therefore, allocate the timeout extension and use the new marker for
this case, but do not expose it to userspace to retain backward
compatibility in the set listing.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
secmark context is artificially limited 256 bytes, rise it to 4Kbytes.
Fixes: fb961945457f ("netfilter: nf_tables: add SECMARK support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/common.h
38cc3c6dcc09 ("net: stmmac: protect updates of 64-bit statistics counters")
fd5a6a71313e ("net: stmmac: est: Per Tx-queue error count for HLBF")
c5c3e1bfc9e0 ("net: stmmac: Offload queueMaxSDU from tc-taprio")
drivers/net/wireless/microchip/wilc1000/netdev.c
c9013880284d ("wifi: fill in MODULE_DESCRIPTION()s for wilc1000")
328efda22af8 ("wifi: wilc1000: do not realloc workqueue everytime an interface is added")
net/unix/garbage.c
11498715f266 ("af_unix: Remove io_uring code for GC.")
1279f9d9dec2 ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Flag (1 << 0) is ignored is set, never used, reject it it with EINVAL
instead.
Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This companion flag to NFT_TABLE_F_OWNER requests the kernel to keep the
table around after the process has exited. It marks such table as
orphaned (by dropping OWNER flag but keeping PERSIST flag in place),
which opens it for other processes to manipulate. For the sake of
simplicity, PERSIST flag may not be altered though.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Add at least this one-liner describing the obvious.
Fixes: 6001a930ce03 ("netfilter: nftables: introduce table ownership")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Add a brief description to the enum's comment.
Fixes: 837830a4b439 ("netfilter: nf_tables: add NFTA_RULE_CHAIN_ID attribute")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Analogous to NFT_MSG_GETOBJ_RESET, but for set elements with a timeout
or attached stateful expressions like counters or quotas - reset them
all at once. Respect a per element timeout value if present to reset the
'expires' value to.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The xt_dccp iptables module supports the matching of DCCP packets based
on the presence or absence of DCCP options. Extend nft_exthdr to add
this functionality to nftables.
Link: https://bugzilla.netfilter.org/show_bug.cgi?id=930
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
This allows userspace ("nft list hooks") to show which bpf program
is attached to which hook.
Without this, user only knows bpf prog is attached at prio
x, y, z at INPUT and FORWARD, but can't tell which program is where.
v4: kdoc fixups (Simon Horman)
Link: https://lore.kernel.org/bpf/ZEELzpNCnYJuZyod@corigine.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-4-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
NFTA_RANGE_OP incorrectly says nft_cmp_ops instead of nft_range_ops.
NFTA_LOG_GROUP and NFTA_LOG_QTHRESHOLD claim NLA_U32 instead of NLA_U16
NFTA_EXTHDR_SREG isn't documented as a register
Signed-off-by: Matthieu De Beule <matthieu.debeule@proton.ch>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
This enables associating a socket with a v1 net_cls cgroup. Useful for
applying a per-cgroup policy when processing packets in userspace.
Signed-off-by: Eric Sage <eric_sage@apple.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
nftables equivalent for ebtables -t broute.
Implement broute meta statement to set br_netfilter_broute flag
in skb to force a packet to be routed instead of being bridged.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Conflicts:
drivers/net/ethernet/intel/ice/ice_main.c
418e53401e47 ("ice: move devlink port creation/deletion")
643ef23bd9dd ("ice: Introduce local var for readability")
https://lore.kernel.org/all/20230127124025.0dacef40@canb.auug.org.au/
https://lore.kernel.org/all/20230124005714.3996270-1-anthony.l.nguyen@intel.com/
drivers/net/ethernet/engleder/tsnep_main.c
3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues")
25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock")
https://lore.kernel.org/all/20230127123604.36bb3e99@canb.auug.org.au/
net/netfilter/nf_conntrack_proto_sctp.c
13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"")
a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths")
f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets")
https://lore.kernel.org/all/20230127125052.674281f9@canb.auug.org.au/
https://lore.kernel.org/all/d36076f3-6add-a442-6d4b-ead9f7ffff86@tessares.net/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
An SCTP endpoint can start an association through a path and tear it
down over another one. That means the initial path will not see the
shutdown sequence, and the conntrack entry will remain in ESTABLISHED
state for 5 days.
By merging the HEARTBEAT_ACKED and ESTABLISHED states into one
ESTABLISHED state, there remains no difference between a primary or
secondary path. The timeout for the merged ESTABLISHED state is set to
210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a
path doesn't see the shutdown sequence, it will expire in a reasonable
amount of time.
With this change in place, there is now more than one state from which
we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so
handle the setting of ASSURED bit whenever a state change has happened
and the new state is ESTABLISHED. Removed the check for dir==REPLY since
the transition to ESTABLISHED can happen only in the reply direction.
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This reverts commit (bff3d0534804: "netfilter: conntrack: add sctp
DATA_SENT state")
Using DATA/SACK to detect a new connection on secondary/alternate paths
works only on new connections, while a HEARTBEAT is required on
connection re-use. It is probably consistent to wait for HEARTBEAT to
create a secondary connection in conntrack.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Introduce NFT_MSG_DESTROY* message type. The destroy operation performs a
delete operation but ignoring the ENOENT errors.
This is useful for the transaction semantics, where failing to delete an
object which does not exist results in aborting the transaction.
This new command allows the transaction to proceed in case the object
does not exist.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Add a new parameter to complement the existing 'netmask' option. The
main difference between netmask and bitmask is that bitmask takes any
arbitrary ip address as input, it does not have to be a valid netmask.
The name of the new parameter is 'bitmask'. This lets us mask out
arbitrary bits in the ip address, for example:
ipset create set1 hash:ip bitmask 255.128.255.0
ipset create set2 hash:ip,port family inet6 bitmask ffff::ff80
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Joshua Hunt <johunt@akamai.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
SCTP conntrack currently assumes that the SCTP endpoints will
probe secondary paths using HEARTBEAT before sending traffic.
But, according to RFC 9260, SCTP endpoints can send any traffic
on any of the confirmed paths after SCTP association is up.
SCTP endpoints that sends INIT will confirm all peer addresses
that upper layer configures, and the SCTP endpoint that receives
COOKIE_ECHO will only confirm the address it sent the INIT_ACK to.
So, we can have a situation where the INIT sender can start to
use secondary paths without the need to send HEARTBEAT. This patch
allows DATA/SACK packets to create new connection tracking entry.
A new state has been added to indicate that a DATA/SACK chunk has
been seen in the original direction - SCTP_CONNTRACK_DATA_SENT.
State transitions mostly follows the HEARTBEAT_SENT, except on
receiving HEARTBEAT/HEARTBEAT_ACK/DATA/SACK in the reply direction.
State transitions in original direction:
- DATA_SENT behaves similar to HEARTBEAT_SENT for all chunks,
except that it remains in DATA_SENT on receving HEARTBEAT,
HEARTBEAT_ACK/DATA/SACK chunks
State transitions in reply direction:
- DATA_SENT behaves similar to HEARTBEAT_SENT for all chunks,
except that it moves to HEARTBEAT_ACKED on receiving
HEARTBEAT/HEARTBEAT_ACK/DATA/SACK chunks
Note: This patch still doesn't solve the problem when the SCTP
endpoint decides to use primary paths for association establishment
but uses a secondary path for association shutdown. We still have
to depend on timeout for connections to expire in such a case.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Analogous to NFT_MSG_GETOBJ_RESET, but for rules: Reset stateful
expressions like counters or quotas. The latter two are the only
consumers, adjust their 'dump' callbacks to respect the parameter
introduced earlier.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Geneve tunnel header may contain options, parse geneve header and update
offset to point to the link layer header according to the opt_len field.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This new expression allows you to match on the inner headers that are
encapsulated by any of the existing tunneling protocols.
This expression parses the inner packet to set the link, network and
transport offsets, so the existing expressions (with a few updates) can
be reused to match on the inner headers.
The inner expression supports for different tunnel combinations such as:
- ethernet frame over IPv4/IPv6 packet, eg. VxLAN.
- IPv4/IPv6 packet over IPv4/IPv6 packet, eg. IPIP.
- IPv4/IPv6 packet over IPv4/IPv6 + transport header, eg. GRE.
- transport header (ESP or SCTP) over transport header (usually UDP)
The following fields are used to describe the tunnel protocol:
- flags, which describe how to parse the inner headers:
NFT_PAYLOAD_CTX_INNER_TUN, the tunnel provides its own header.
NFT_PAYLOAD_CTX_INNER_ETHER, the ethernet frame is available as inner header.
NFT_PAYLOAD_CTX_INNER_NH, the network header is available as inner header.
NFT_PAYLOAD_CTX_INNER_TH, the transport header is available as inner header.
For example, VxLAN sets on all of these flags. While GRE only sets on
NFT_PAYLOAD_CTX_INNER_NH and NFT_PAYLOAD_CTX_INNER_TH. Then, ESP over
UDP only sets on NFT_PAYLOAD_CTX_INNER_TH.
The tunnel description is composed of the following attributes:
- header size: in case the tunnel comes with its own header, eg. VxLAN.
- type: this provides a hint to userspace on how to delinearize the rule.
This is useful for VxLAN and Geneve since they run over UDP, since
transport does not provide a hint. This is also useful in case hardware
offload is ever supported. The type is not currently interpreted by the
kernel.
- expression: currently only payload supported. Follow up patch adds
also inner meta support which is required by autogenerated
dependencies. The exthdr expression should be supported too
at some point. There is a new inner_ops operation that needs to be
set on to allow to use an existing expression from the inner expression.
This patch adds a new NFT_PAYLOAD_TUN_HEADER base which allows to match
on the tunnel header fields, eg. vxlan vni.
The payload expression is embedded into nft_inner private area and this
private data area is passed to the payload inner eval function via
direct call.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When the SPDX-License-Identifier tag has been added, the corresponding
license text has not been removed.
Remove it now.
Also, in xt_connmark.h, move the copyright text at the top of the file
which is a much more common pattern.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
|
|
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(linux-5.19-rc2$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
-fstrict-flex-arrays=3 is coming and we need to land these changes
to prevent issues like these in the short future:
../fs/minix/dir.c:337:3: warning: 'strcpy' will always overflow; destination buffer has size 0,
but the source string has length 2 (including NUL byte) [-Wfortify-source]
strcpy(de3->name, ".");
^
Since these are all [0] to [] changes, the risk to UAPI is nearly zero. If
this breaks anything, we can use a union with a new member name.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/62b675ec.wKX6AOZ6cbE71vtF%25lkp@intel.com/
Acked-by: Dan Williams <dan.j.williams@intel.com> # For ndctl.h
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Commit e2be04c7f995 ("License cleanup: add SPDX license identifier to
uapi header files with a license") added the correct SPDX identifier to
include/uapi/linux/netfilter/xt_IDLETIMER.h.
A subsequent commit removed it for no reason and reintroduced the UAPI
license incorrectness as the file is now missing the UAPI exception
again.
Add it back and remove the GPLv2 boilerplate while at it.
Fixes: 68983a354a65 ("netfilter: xtables: Add snapshot of hardidletimer target")
Cc: Manoj Basapathi <manojbm@codeaurora.org>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: netfilter-devel@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This info could be useful to improve traffic analysis.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When userspace, e.g. conntrackd, inserts an entry with a specified helper,
its possible that the helper is lost immediately after its added:
ctnetlink_create_conntrack
-> nf_ct_helper_ext_add + assign helper
-> ctnetlink_setup_nat
-> ctnetlink_parse_nat_setup
-> parse_nat_setup -> nfnetlink_parse_nat_setup
-> nf_nat_setup_info
-> nf_conntrack_alter_reply
-> __nf_ct_try_assign_helper
... and __nf_ct_try_assign_helper will zero the helper again.
Set IPS_HELPER bit to bypass auto-assign logic, its unwanted, just like
when helper is assigned via ruleset.
Dropped old 'not strictly necessary' comment, it referred to use of
rcu_assign_pointer() before it got replaced by RCU_INIT_POINTER().
NB: Fixes tag intentionally incorrect, this extends the referenced commit,
but this change won't build without IPS_HELPER introduced there.
Fixes: 6714cf5465d280 ("netfilter: nf_conntrack: fix explicit helper attachment and NAT")
Reported-by: Pham Thanh Tuyen <phamtyn@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Allow to match and mangle on inner headers / payload data after the
transport header. There is a new field in the pktinfo structure that
stores the inner header offset which is calculated only when requested.
Only TCP and UDP supported at this stage.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Generalize NFT_META_IIFTYPE to NFT_META_IFTYPE which allows you to match
on the interface type of the skb->dev field. This field is used by the
netdev family to add an implicit dependency to skip non-ethernet packets
when matching on layer 3 and 4 TCP/IP header fields.
For backward compatibility, add the NFT_META_IIFTYPE alias to
NFT_META_IFTYPE.
Add __NFT_META_IIFTYPE, to be used by userspace in the future to match
specifically on the iiftype.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Protect nft_ct template with global mutex, from Pavel Skripkin.
2) Two recent commits switched inet rt and nexthop exception hashes
from jhash to siphash. If those two spots are problematic then
conntrack is affected as well, so switch voer to siphash too.
While at it, add a hard upper limit on chain lengths and reject
insertion if this is hit. Patches from Florian Westphal.
3) Fix use-after-scope in nf_socket_ipv6 reported by KASAN,
from Benjamin Hesmans.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: socket: icmp6: fix use-after-scope
netfilter: refuse insertion if chain has grown too large
netfilter: conntrack: switch to siphash
netfilter: conntrack: sanitize table size default settings
netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex
====================
Link: https://lore.kernel.org/r/20210903163020.13741-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Also add a stat counter for this that gets exported both via old /proc
interface and ctnetlink.
Assuming the old default size of 16536 buckets and max hash occupancy of
64k, this results in 128k insertions (origin+reply), so ~8 entries per
chain on average.
The revised settings in this series will result in about two entries per
bucket on average.
This allows a hard-limit ceiling of 64.
This is not tunable at the moment, but its possible to either increase
nf_conntrack_buckets or decrease nf_conntrack_max to reduce average
lengths.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h
9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp")
9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins")
099fdeda659d ("bnxt_en: Event handler for PPS events")
kernel/bpf/helpers.c
include/linux/bpf-cgroup.h
a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()")
c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current")
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c
5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray")
2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer")
MAINTAINERS
7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo")
7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The family is relevant for pseudo-families like NFPROTO_INET
otherwise the user needs to rely on the hook function name to
differentiate it from NFPROTO_IPV4 and NFPROTO_IPV6 names.
Add nfnl_hook_chain_desc_attributes instead of using the existing
NFTA_CHAIN_* attributes, since these do not provide a family number.
Fixes: e2cf17d3774c ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
If CTA_STATUS is present, but CTA_STATUS_MASK is not, then the
mask is automatically set to 'status', so that kernel returns those
entries that have all of the requested bits set.
This makes more sense than using a all-one mask since we'd hardly
ever find a match.
There are no other checks for status bits, so if e.g. userspace
sets impossible combinations it will get an empty dump.
If kernel would reject unknown status bits, then a program that works on
a future kernel that has IPS_FOO bit fails on old kernels.
Same for 'impossible' combinations:
Kernel never sets ASSURED without first having set SEEN_REPLY, but its
possible that a future kernel could do so.
Therefore no sanity tests other than a 0-mask.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nf_conntrack_netlink.h does not exist, refer to nfnetlink_conntrack.h instead.
Signed-off-by: Duncan Roe <duncan_roe@optusnet.com.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a new optional expression that tells you when last matching on a
given rule / set element element has happened.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This nfnl subsystem allows to dump the list of all active netfiler hooks,
e.g. defrag, conntrack, nf/ip/arp/ip6tables and so on.
This helps to see what kind of features are currently enabled in
the network stack.
Sample output from nft tool using this infra:
$ nft list hook ip input
family ip hook input {
+0000000010 nft_do_chain_inet [nf_tables] # nft table firewalld INPUT
+0000000100 nf_nat_ipv4_local_in [nf_nat]
+2147483647 ipv4_confirm [nf_conntrack]
}
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
Fernando Fernandez Mancera
Phil Sutter
Florian Westphal
Jeremy Sowden
Pablo Neira Ayuso
Jakub Kicinski
Matthieu De Beule
Eric Sage
Sriram Yagnaraman
Fernando Fernandez Mancera
Vishwanath Pai
Christophe JAILLET
Linus Torvalds
Gustavo A. R. Silva
Thomas Gleixner
Nicolas Dichtel
Duncan Roe