| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
ASoC: Updates for v6.9
This has been quite a small release, there's a lot of driver specific
cleanups and minor enhancements but hardly anything on the core and only
one new driver. Highlights include:
- SoundWire support for AMD ACP 6.3 systems.
- Support for reporting version information for AVS firmware.
- Support DSPless mode for Intel Soundwire systems.
- Support for configuring CS35L56 amplifiers using EFI calibration
data.
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
|
|
Timing select registers for SRC and CMD are by default
referring to the corresponding SSI word select.
The calculation rule from HW spec skips SSI8, which has
no clock connection.
>From section 43.2.18 CMD Output Timing Select Register (CMDOUT_TIMSEL),
of R-Car Series, 3rd Generation Hardware User’s Manual Rev.2.20:
CMD0_OUT_DIVCLK_ Output Timing
SEL [4:0] Signal Select
B'0 0110: ssi_ws0
B'0 0111: ssi_ws1
B'0 1000: ssi_ws2
B'0 1001: ssi_ws3
B'0 1010: ssi_ws4
B'0 1011: ssi_ws5
B'0 1100: ssi_ws6
B'0 1101: ssi_ws7
<GAP>
B'0 1110: ssi_ws9
B'0 1111: Setting prohibited
Fix the erroneous prohibited setting of timsel value 1111 (0xf) for SSI9
by using timsel value 1110 (0xe) instead. This is possible because SSI8
is not connected as shown by <GAP> in the table above.
[21.695055] rcar_sound ec500000.sound: b adg[0]-CMDOUT_TIMSEL (32):00000f00/00000f1f
Correct the timsel assignment.
Fixes: 629509c5bc478c ("ASoC: rsnd: add Gen2 SRC and DMAEngine support")
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Andreas Pape <Andreas.Pape4@bosch.com>
Signed-off-by: Yeswanth Rayapati <yeswanth.rayapati@in.bosch.com>
Tested-by: Yeswanth Rayapati <yeswanth.rayapati@in.bosch.com>
[erosca: massage commit description]
Signed-off-by: Eugeniu Rosca <eugeniu.rosca@bosch.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/20240301085003.3057-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The devm_request_irq() call is done for "dma_rt" interrupt but the error
message printed "dma_tx" interrupt on failure, fix this by updating
dma_tx -> dma_rt in dev_err_probe() message. While at it aligned the code.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Fixes: 38c042b59af0248a ("ASoC: sh: rz-ssi: Update interrupt handling for half duplex channels")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://msgid.link/r/20240130150822.327434-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dma_request_slave_channel() is deprecated. dma_request_chan() should
be used directly instead.
Switch to the preferred function and update the error handling accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/1a837f96f056fa3dcb02a77afa5892d40b354cb1.1700417934.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # for at91
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-1-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
ASoC is using 2 type of prefix (asoc_xxx() vs snd_soc_xxx()), but there
is no particular reason about that [1].
To reduce confusing, standarding these to snd_soc_xxx() is sensible.
This patch adds asoc_xxx() macro to keep compatible for a while.
It will be removed if all drivers were switched to new style.
Link: https://lore.kernel.org/r/87h6td3hus.wl-kuninori.morimoto.gx@renesas.com [1]
|
|
sound/soc/sh/dma-sh7760.c: In function ‘camelot_prepare’:
./include/linux/kern_levels.h:5:25: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘unsigned int’ [-Wformat=]
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
sound/soc/sh/dma-sh7760.c:198:9: note: in expansion of macro ‘pr_debug’
198 | pr_debug("PCM data: addr 0x%08lx len %d\n",
| ^~~~~~~~
Fix this by using "%pad" and taking the address to format the DMA
address. While at it, use "%zu" to format size_t.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309250903.XNAjFuxy-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230925125646.3681807-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87cyyos25y.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For the benefit of CI.
|
|
The loop is not using "node", of_node_put(node) is not needed.
Cc: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8734zlilmd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
for_each_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an
of_node_put.
This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20230907095521.14053-11-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current adg.c will configure BRGCKR/BRRA/BRRB to output clock
when it start sound. OTAH, rsnd_adg_clk_enable() will enables
clk_a/b/c when driver was probed.
But it is strange, these should be set in the same time.
This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h6oqzlei.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current adg has default division for BRRA/BRRB, but it was created at
very beginning of the driver implementation, and is now an unnecessary
settings.
Because it has this default division, unexpected clockout might
be selected. For example if it requests only 44.1kHz base clockout,
unrequested 48kHz base clockout also will be selected.
This patch remove default division of clock out
Reported-by: Vincenzo De Michele <vincenzo.michele@davinci.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87il96zlep.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
default value for brga/brgb should be 0xff instead of 0x2.
This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87jztmzlew.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current adg.c doesn't assume that requested clock out divide condition
doesn't match. In such case, it will indicate strange message, and will
register NULL clock, etc. It is just a DT setting miss, but is
confusable. This patch check all conditions for it.
Reported-by: Vincenzo De Michele <vincenzo.michele@davinci.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lee2zlf7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Basically Renesas sound ADG is assuming that it has accurately
divisible input clock. But sometimes / some board might not have it.
The clk_i from CPG is used for such case. It can't calculate accurate
division, but can be used as approximate rate.
This patch enable clk_i for such case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Adnan Ali <adnan.ali@bp.renesas.com>
Tested-by: Vincenzo De Michele <vincenzo.michele@davinci.de>
Tested-by: Patrick Keil <patrick.keil@conti-engineering.com>
Link: https://lore.kernel.org/r/87msyizlfd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ALSA SoC merges DAI call backs into .ops.
This patch merge these into one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkfhb0tg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We need to call of_node_put() when break from
for_each_child_of_node(). This patch add missing
of_node_put().
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkfh9g68.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
+-- Basic Board ---------+
|+--------+ +------+|
|| CPU ch0| <--> |CodecA||
|| ch1| <-+ +------+|
|+--------+ | |
+-------------|----------+
+-- expansion board -----+
| | +------+|
| +->|CodecB||
| +------+|
+------------------------+
In above HW connection case, we intuitively think we want to handle these
as "2 Sound Cards".
card0,0: CPU-ch0 - CodecA
card1,0: CPU-ch1 - CodecB
But, we needed to handle it as "1 big Sound Card", because of
Component vs Card limitation.
card0,0: CPU-ch0 - CodecA
card0,1: CPU-ch1 - CodecB
This patch enables multi Component to handle multi Cards.
To support it, it needs
- Fill dai_args for each DAI on snd_soc_dai_driver
- Parse DT for each Component (Simple Card/Audio Graph Card)
Ex) Simple Card
rcar_sound {
...
/* Component0 */
rcar_sound,dai@0 {
...
};
/* Component1 */
rcar_sound,dai@1 {
...
};
};
Ex) Audio Graph Card/Card2
rcar_sound {
/* Component0 */
ports@0 {
...
};
/* Component1 */
ports@1 {
...
};
};
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tttub1m4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It calls rsnd_dai_of_node() to know it was called from Audio Graph
Card/Card2, or from Simple Audio Card. And after that, it gets
number of related DAIs.
To be more simple code, this patch merges these.
This is prepare for multi Component support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8eab1md.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current rsnd is using DAI ID to get own priv data without setting
driver->id. It was no problem for Single Component, but will be problem
in case of Multi Component, because it is not a DAI serial number.
struct snd_soc_dai *snd_soc_register_dai(...)
{
...
if (dai_drv->id)
dai->id = dai_drv->id;
else
dai->id = component->num_dai;
...
}
This patch sets driver->id, and get serial number.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wmyqb1mm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The module loads firmware so add a MODULE_FIRMWARE macro to provide that
information via modinfo.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Link: https://lore.kernel.org/r/20230613095454.38696-1-juerg.haefliger@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-135-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-134-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-133-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-132-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-131-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144733.1546413-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144732.1546328-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For half duplex channels we dont have separate interrupts for Tx and Rx
instead we have single interrupt Rt (where the signal for Rx and Tx is
muxed). To handle such a case install a handler in case we have a dma_rt
interrupt specified in the DT for the PIO mode.
Note, for backward compatibility we check if the Rx and Tx interrupts
are present first instead of checking Rt interrupt.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230217185225.43310-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
"BRG" stands for "Baud Rate Generator", but is frequently misspelled as
"RBG".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/ac6365c17861d71fbc89d823089db4aafdb763ed.1676470202.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current rsnd silently uses default TDM width if it was strange
settings. It is difficult to notice about it.
This patch indicates warning for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lel6ksqn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch is tested on V4H White Hawk + ARD-AUDIO-DA7212
Signed-off-by: Linh Phung <linh.phung.jy@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7qe5ej5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch tidyups rsnd_dma_probe(), but there is no effect.
This is prepare for Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r0va5elq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch tidyups rsnd_dma_addr(), but there is no effect.
This is prepare for Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sffq5elx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ADG need to know output rate of 44.1kHz/48kHz.
It is using single variable for each, but this patch changes
it to array. Nothing is changed by this patch.
This is prepare for R-Car Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tu065em3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current adg.c is assuming number of clkin/clkout are fixed, but it is
not correct on Gen4. This patch uses clkin/out_size to handling it.
This is prepare for R-Car Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8km5em7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch moves clkout_name to top of the file to handling both
clkin/clkout in the same place.
This is prepare for R-Car Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wn525emc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current adg.c is usig "clk" as clock IN, but is using "clkout" for
clock OUT. This patch arranges "clk" to "clkin".
This is prepare for R-Car Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y1pi5emh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The flag LRCLK_ASYNC / AUDIO_OUT_48 had been added to handling
special case of Salvator-X board, but it is not used on upstream.
It makes code complex today, let's remove these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zg9y5emm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch follows clkin debug message style on clkout.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qna6t77.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some SoC can't handle all requested hw rule. In such case, it will indicate
like below, but it is unclear why it didn't work to user.
This patch indicates warning in such case once, because player will try to
similar rule many times.
# aplay sound.wav
Playing WAVE 'sound.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
aplay: aplay.c: 1359: set_params: Assertion `err >= 0' failed.
Aborted by signal Aborted...
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87357q6t7b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
rsnd_ssi_master_clk_start() indicates error message if it couldn't
handle requested clock/rate, but it is not caring all cases.
This patch cares it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874js66t7g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit b43b8ae87c8e0a8 ("ASoC: rsnd: protect mod->status") removed
RSND_DEBUG_NO_DAI_CALL and rsnd_dbg_dai_call(), but these are still
exist on rsnd.h. This patch removes it.
Fixes: b43b8ae87c8e ("ASoC: rsnd: protect mod->status")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875ycm6t7l.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit 1f9c82b5ab83ff2 ("ASoC: rsnd: add debugfs support") added
CONFIG_DEBUG_FS related definitions on rsnd.h, but it should be
added inside of RSND_H. This patch fixup it.
Fixes: 1f9c82b5ab83 ("ASoC: rsnd: add debugfs support")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877cx26t7r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current rsnd sets "channels_min" which is used from
snd_soc_dai_stream_valid() without checking DT playback/capture property.
Thus, "aplay -l" or "arecord -l" will indicate un-exising device.
This patch checks DT proerty and do nothing playback/capture settings if
not exist.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878rhi6t7x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current rsnd_adg_clk_dbg_info() is using locak clk_name[] to ndicating
clk name, but we don't want to use local clk_name[] everywhere when we
support R-Car Gen4 sound to handling non compatible clk naming.
This patch uses __clk_get_name() instead of local clk_name[] for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8mz8wcs.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20221127193441.0b54484d@endymion.delvare
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current soc-pcm.c is coping fe hw_param to dpcm->hw_param (A),
fixup it (B), and copy it to be (C).
int dpcm_be_dai_hw_params(...)
{
...
for_each_dpcm_be(fe, stream, dpcm) {
...
/* copy params for each dpcm */
(A) memcpy(&dpcm->hw_params, &fe->dpcm[stream].hw_params, ...) ;
/* perform any hw_params fixups */
(B) ret = snd_soc_link_be_hw_params_fixup(be, &dpcm->hw_params);
...
/* copy the fixed-up hw params for BE dai */
(C) memcpy(&be->dpcm[stream].hw_params, &dpcm->hw_params, ...);
...
}
...
}
But here, (1) it is coping hw_params without caring stream (Playback/Capture),
(2) we can get same value from be. We don't need to have dpcm->hw_params.
This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/87v8ogsl6h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use DIV_ROUND_UP() instead of open-coding it, which intents and makes it
more clear what is going on for the casual reviewer.
The Coccinelle references Commit e4d8aef21403 ("ALSA: usb: Use
DIV_ROUND_UP() instead of open-coding it").
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20220927140948.17696-4-shangxiaojing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
Takashi Iwai
Andreas Pape
Lad Prabhakar
Christophe JAILLET
Rob Herring
Mark Brown
Geert Uytterhoeven
Kuninori Morimoto
Julia Lawall
Juerg Haefliger
Uwe Kleine-König
Jean Delvare
Shang XiaoJing