| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other
things, update the L4 checksum after reverse SNATing IPv6 packets. That
use case is however not currently supported and leads to invalid
skb->csum values in some cases. This patch adds support for IPv6 address
changes in bpf_l4_csum_update via a new flag.
When calling bpf_l4_csum_replace in Cilium, it ends up calling
inet_proto_csum_replace_by_diff:
1: void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb,
2: __wsum diff, bool pseudohdr)
3: {
4: if (skb->ip_summed != CHECKSUM_PARTIAL) {
5: csum_replace_by_diff(sum, diff);
6: if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
7: skb->csum = ~csum_sub(diff, skb->csum);
8: } else if (pseudohdr) {
9: *sum = ~csum_fold(csum_add(diff, csum_unfold(*sum)));
10: }
11: }
The bug happens when we're in the CHECKSUM_COMPLETE state. We've just
updated one of the IPv6 addresses. The helper now updates the L4 header
checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't.
For an IPv6 packet, the updates of the IPv6 address and of the L4
checksum will cancel each other. The checksums are set such that
computing a checksum over the packet including its checksum will result
in a sum of 0. So the same is true here when we update the L4 checksum
on line 5. We'll update it as to cancel the previous IPv6 address
update. Hence skb->csum should remain untouched in this case.
The same bug doesn't affect IPv4 packets because, in that case, three
fields are updated: the IPv4 address, the IP checksum, and the L4
checksum. The change to the IPv4 address and one of the checksums still
cancel each other in skb->csum, but we're left with one checksum update
and should therefore update skb->csum accordingly. That's exactly what
inet_proto_csum_replace_by_diff does.
This special case for IPv6 L4 checksums is also described atop
inet_proto_csum_replace16, the function we should be using in this case.
This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6,
to indicate that we're updating the L4 checksum of an IPv6 packet. When
the flag is set, inet_proto_csum_replace_by_diff will skip the
skb->csum update.
Fixes: 7d672345ed295 ("bpf: add generic bpf_csum_diff helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull bpf updates from Alexei Starovoitov:
- Fix and improve BTF deduplication of identical BTF types (Alan
Maguire and Andrii Nakryiko)
- Support up to 12 arguments in BPF trampoline on arm64 (Xu Kuohai and
Alexis Lothoré)
- Support load-acquire and store-release instructions in BPF JIT on
riscv64 (Andrea Parri)
- Fix uninitialized values in BPF_{CORE,PROBE}_READ macros (Anton
Protopopov)
- Streamline allowed helpers across program types (Feng Yang)
- Support atomic update for hashtab of BPF maps (Hou Tao)
- Implement json output for BPF helpers (Ihor Solodrai)
- Several s390 JIT fixes (Ilya Leoshkevich)
- Various sockmap fixes (Jiayuan Chen)
- Support mmap of vmlinux BTF data (Lorenz Bauer)
- Support BPF rbtree traversal and list peeking (Martin KaFai Lau)
- Tests for sockmap/sockhash redirection (Michal Luczaj)
- Introduce kfuncs for memory reads into dynptrs (Mykyta Yatsenko)
- Add support for dma-buf iterators in BPF (T.J. Mercier)
- The verifier support for __bpf_trap() (Yonghong Song)
* tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (135 commits)
bpf, arm64: Remove unused-but-set function and variable.
selftests/bpf: Add tests with stack ptr register in conditional jmp
bpf: Do not include stack ptr register in precision backtracking bookkeeping
selftests/bpf: enable many-args tests for arm64
bpf, arm64: Support up to 12 function arguments
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf: Avoid __bpf_prog_ret0_warn when jit fails
bpftool: Add support for custom BTF path in prog load/loadall
selftests/bpf: Add unit tests with __bpf_trap() kfunc
bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
bpf: Remove special_kfunc_set from verifier
selftests/bpf: Add test for open coded dmabuf_iter
selftests/bpf: Add test for dmabuf_iter
bpf: Add open coded dmabuf iterator
bpf: Add dmabuf iterator
dma-buf: Rename debugfs symbols
bpf: Fix error return value in bpf_copy_from_user_dynptr
libbpf: Use mmap to parse vmlinux BTF from sysfs
selftests: bpf: Add a test for mmapable vmlinux BTF
btf: Allow mmap of vmlinux btf
...
|
|
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
|
On linux-next, build for bpf selftest displays a warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/if_xdp.h'
differs from latest version at 'include/uapi/linux/if_xdp.h'.
Commit 8066e388be48 ("net: add UAPI to the header guard in various network headers")
changed the header guard from _LINUX_IF_XDP_H to _UAPI_LINUX_IF_XDP_H
in include/uapi/linux/if_xdp.h.
To resolve the warning, update tools/include/uapi/linux/if_xdp.h
to align with the changes in include/uapi/linux/if_xdp.h
Fixes: 8066e388be48 ("net: add UAPI to the header guard in various network headers")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/all/c2bc466d-dff2-4d0d-a797-9af7f676c065@linux.ibm.com/
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20250527054138.1086006-1-skb99@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull nolibc updates from Thomas Weißschuh:
- New supported architectures: m68k, SPARC (32 and 64 bit)
- Compatibility with kselftest_harness.h
- A more robust mechanism to include all of nolibc from each header
- Split existing features into new headers to simplify adoption
- Compatibility with UBSAN and it is used in the testsuite
- Many small new features focussing on usage in kselftests
* tag 'nolibc-20250526-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (83 commits)
selftests: harness: Stop using setjmp()/longjmp()
selftests: harness: Add "variant" and "self" to test metadata
selftests: harness: Add teardown callback to test metadata
selftests: harness: Move teardown conditional into test metadata
selftests: harness: Don't set setup_completed for fixtureless tests
selftests: harness: Implement test timeouts through pidfd
selftests: harness: Remove dependency on libatomic
selftests: harness: Remove inline qualifier for wrappers
selftests: harness: Mark functions without prototypes static
selftests: harness: Ignore unused variant argument warning
selftests: harness: Use C89 comment style
selftests: harness: Add kselftest harness selftest
selftests/nolibc: drop include guards around standard headers
tools/nolibc: move NULL and offsetof() to sys/stddef.h
tools/nolibc: move uname() and friends to sys/utsname.h
tools/nolibc: move makedev() and friends to sys/sysmacros.h
tools/nolibc: move getrlimit() and friends to sys/resource.h
tools/nolibc: move reboot() to sys/reboot.h
tools/nolibc: move prctl() to sys/prctl.h
tools/nolibc: move mount() to sys/mount.h
...
|
|
Pull perf events updates from Ingo Molnar:
"Core & generic-arch updates:
- Add support for dynamic constraints and propagate it to the Intel
driver (Kan Liang)
- Fix & enhance driver-specific throttling support (Kan Liang)
- Record sample last_period before updating on the x86 and PowerPC
platforms (Mark Barnett)
- Make perf_pmu_unregister() usable (Peter Zijlstra)
- Unify perf_event_free_task() / perf_event_exit_task_context()
(Peter Zijlstra)
- Simplify perf_event_release_kernel() and perf_event_free_task()
(Peter Zijlstra)
- Allocate non-contiguous AUX pages by default (Yabin Cui)
Uprobes updates:
- Add support to emulate NOP instructions (Jiri Olsa)
- selftests/bpf: Add 5-byte NOP uprobe trigger benchmark (Jiri Olsa)
x86 Intel PMU enhancements:
- Support Intel Auto Counter Reload [ACR] (Kan Liang)
- Add PMU support for Clearwater Forest (Dapeng Mi)
- Arch-PEBS preparatory changes: (Dapeng Mi)
- Parse CPUID archPerfmonExt leaves for non-hybrid CPUs
- Decouple BTS initialization from PEBS initialization
- Introduce pairs of PEBS static calls
x86 AMD PMU enhancements:
- Use hrtimer for handling overflows in the AMD uncore driver
(Sandipan Das)
- Prevent UMC counters from saturating (Sandipan Das)
Fixes and cleanups:
- Fix put_ctx() ordering (Frederic Weisbecker)
- Fix irq work dereferencing garbage (Frederic Weisbecker)
- Misc fixes and cleanups (Changbin Du, Frederic Weisbecker, Ian
Rogers, Ingo Molnar, Kan Liang, Peter Zijlstra, Qing Wang, Sandipan
Das, Thorsten Blum)"
* tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
perf/headers: Clean up <linux/perf_event.h> a bit
perf/uapi: Clean up <uapi/linux/perf_event.h> a bit
perf/uapi: Fix PERF_RECORD_SAMPLE comments in <uapi/linux/perf_event.h>
mips/perf: Remove driver-specific throttle support
xtensa/perf: Remove driver-specific throttle support
sparc/perf: Remove driver-specific throttle support
loongarch/perf: Remove driver-specific throttle support
csky/perf: Remove driver-specific throttle support
arc/perf: Remove driver-specific throttle support
alpha/perf: Remove driver-specific throttle support
perf/apple_m1: Remove driver-specific throttle support
perf/arm: Remove driver-specific throttle support
s390/perf: Remove driver-specific throttle support
powerpc/perf: Remove driver-specific throttle support
perf/x86/zhaoxin: Remove driver-specific throttle support
perf/x86/amd: Remove driver-specific throttle support
perf/x86/intel: Remove driver-specific throttle support
perf: Only dump the throttle log for the leader
perf: Fix the throttle logic for a group
perf/core: Add the is_event_in_freq_mode() helper to simplify the code
...
|
|
Pull locking updates from Ingo Molnar:
"Futexes:
- Add support for task local hash maps (Sebastian Andrzej Siewior,
Peter Zijlstra)
- Implement the FUTEX2_NUMA ABI, which feature extends the futex
interface to be NUMA-aware. On NUMA-aware futexes a second u32 word
containing the NUMA node is added to after the u32 futex value word
(Peter Zijlstra)
- Implement the FUTEX2_MPOL ABI, which feature extends the futex
interface to be mempolicy-aware as well, to further refine futex
node mappings and lookups (Peter Zijlstra)
Locking primitives:
- Misc cleanups (Andy Shevchenko, Borislav Petkov, Colin Ian King,
Ingo Molnar, Nam Cao, Peter Zijlstra)
Lockdep:
- Prevent abuse of lockdep subclasses (Waiman Long)
- Add number of dynamic keys to /proc/lockdep_stats (Waiman Long)
Plus misc cleanups and fixes"
* tag 'locking-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
selftests/futex: Fix spelling mistake "unitiliazed" -> "uninitialized"
futex: Correct the kernedoc return value for futex_wait_setup().
tools headers: Synchronize prctl.h ABI header
futex: Use RCU_INIT_POINTER() in futex_mm_init().
selftests/futex: Use TAP output in futex_numa_mpol
selftests/futex: Use TAP output in futex_priv_hash
futex: Fix kernel-doc comments
futex: Relax the rcu_assign_pointer() assignment of mm->futex_phash in futex_mm_init()
futex: Fix outdated comment in struct restart_block
locking/lockdep: Add number of dynamic keys to /proc/lockdep_stats
locking/lockdep: Prevent abuse of lockdep subclass
locking/lockdep: Move hlock_equal() to the respective #ifdeffery
futex,selftests: Add another FUTEX2_NUMA selftest
selftests/futex: Add futex_numa_mpol
selftests/futex: Add futex_priv_hash
selftests/futex: Build without headers nonsense
tools/perf: Allow to select the number of hash buckets
tools headers: Synchronize prctl.h ABI header
futex: Implement FUTEX2_MPOL
futex: Implement FUTEX2_NUMA
...
|
|
Pull vfs selftests updates from Christian Brauner:
"This contains various cleanups, fixes, and extensions for out
filesystem selftests"
* tag 'vfs-6.16-rc1.selftests' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/fs/mount-notify: add a test variant running inside userns
selftests/filesystems: create setup_userns() helper
selftests/filesystems: create get_unique_mnt_id() helper
selftests/fs/mount-notify: build with tools include dir
selftests/mount_settattr: remove duplicate syscall definitions
selftests/pidfd: move syscall definitions into wrappers.h
selftests/fs/statmount: build with tools include dir
selftests/filesystems: move wrapper.h out of overlayfs subdir
selftests/mount_settattr: ensure that ext4 filesystem can be created
selftests/mount_settattr: add missing STATX_MNT_ID_UNIQUE define
selftests/mount_settattr: don't define sys_open_tree() twice
|
|
As long as recvmsg() or recvmmsg() is used with cmsg, it is not
possible to avoid receiving file descriptors via SCM_RIGHTS.
This behaviour has occasionally been flagged as problematic, as
it can be (ab)used to trigger DoS during close(), for example, by
passing a FUSE-controlled fd or a hung NFS fd.
For instance, as noted on the uAPI Group page [0], an untrusted peer
could send a file descriptor pointing to a hung NFS mount and then
close it. Once the receiver calls recvmsg() with msg_control, the
descriptor is automatically installed, and then the responsibility
for the final close() now falls on the receiver, which may result
in blocking the process for a long time.
Regarding this, systemd calls cmsg_close_all() [1] after each
recvmsg() to close() unwanted file descriptors sent via SCM_RIGHTS.
However, this cannot work around the issue at all, because the final
fput() may still occur on the receiver's side once sendmsg() with
SCM_RIGHTS succeeds. Also, even filtering by LSM at recvmsg() does
not work for the same reason.
Thus, we need a better way to refuse SCM_RIGHTS at sendmsg().
Let's introduce SO_PASSRIGHTS to disable SCM_RIGHTS.
Note that this option is enabled by default for backward
compatibility.
Link: https://uapi-group.org/kernel-features/#disabling-reception-of-scm_rights-for-af_unix-sockets #[0]
Link: https://github.com/systemd/systemd/blob/v257.5/src/basic/fd-util.c#L612-L628 #[1]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When applying a recent commit to the <uapi/linux/perf_event.h>
header I noticed that we have accumulated quite a bit of
historic noise in this header, so do a bit of spring cleaning:
- Define bitfields in a vertically aligned fashion, like
perf_event_mmap_page::capabilities already does. This
makes it easier to see the distribution and sizing of
bits within a word, at a glance. The following is much
more readable:
__u64 cap_bit0 : 1,
cap_bit0_is_deprecated : 1,
cap_user_rdpmc : 1,
cap_user_time : 1,
cap_user_time_zero : 1,
cap_user_time_short : 1,
cap_____res : 58;
Than:
__u64 cap_bit0:1,
cap_bit0_is_deprecated:1,
cap_user_rdpmc:1,
cap_user_time:1,
cap_user_time_zero:1,
cap_user_time_short:1,
cap_____res:58;
So convert all bitfield definitions from the latter style to the
former style.
- Fix typos and grammar
- Fix capitalization
- Remove whitespace noise
- Harmonize the definitions of various generations and groups of
PERF_MEM_ ABI values.
- Vertically align all definitions and assignments to the same
column (48), as the first definition (enum perf_type_id),
throughout the entire header.
- And in general make the code and comments to be more in sync
with each other and to be more readable overall.
No change in functionality.
Copy the changes over to tools/include/uapi/linux/perf_event.h.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250521221529.2547099-1-irogers@google.com
|
|
AAUX data for PERF_SAMPLE_AUX appears last. PERF_SAMPLE_CGROUP is
missing from the comment.
This makes the <uapi/linux/perf_event.h> comment match that in the
perf_event_open man page.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20250521221529.2547099-1-irogers@google.com
|
|
This is the location regular userspace expects these definitions.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250515-nolibc-sys-v1-8-74f82eea3b59@weissschuh.net
|
|
This is the location regular userspace expects these definitions.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250515-nolibc-sys-v1-7-74f82eea3b59@weissschuh.net
|
|
This is the location regular userspace expects these definitions.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250515-nolibc-sys-v1-6-74f82eea3b59@weissschuh.net
|
|
This is the location regular userspace expects these definitions.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250515-nolibc-sys-v1-5-74f82eea3b59@weissschuh.net
|
|
This is the location regular userspace expects this definition.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250515-nolibc-sys-v1-4-74f82eea3b59@weissschuh.net
|
|
This is the location regular userspace expects this definition.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250515-nolibc-sys-v1-3-74f82eea3b59@weissschuh.net
|
|
This is the location regular userspace expects this definition.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250515-nolibc-sys-v1-2-74f82eea3b59@weissschuh.net
|
|
This is the location regular userspace expects this definition.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250515-nolibc-sys-v1-1-74f82eea3b59@weissschuh.net
|
|
Newer architectures like riscv 32-bit are missing sys_wait4().
Make use of the fact that wait(&status) is defined to be equivalent to
waitpid(-1, status, 0) to implement it on all architectures.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-15-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Newer architectures (like riscv32) do not implement sys_gettimeofday().
In those cases fall back to sys_clock_gettime().
While that does not support the timezone argument of sys_gettimeofday(),
specifying this argument invokes undefined behaviour, so it's safe to ignore.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-14-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Only the standard POSIX modes are supported.
No extensions nor the (noop) "b" from ISO C are accepted.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-13-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Not all configurations support namespaces, so skip the tests where
necessary. Also if the tests are running without privileges.
Enable the namespace configuration for those architectures where it is not
enabled by default.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-12-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-11-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-10-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-9-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-8-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-7-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-6-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-5-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-4-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Add fstat(), fstatat() and lstat(). All of them use the existing implementation
based on statx().
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-3-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
The %m format can be used to format the current errno.
It is non-standard but supported by other commonly used libcs like glibc and
musl, so applications do rely on them.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-2-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-1-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
The UAPI headers already provide definitions for these symbols.
Using them makes the code shorter, more robust and compatible with
applications using linux/poll.h directly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250430-poll-v1-2-44b5ceabdeee@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is the location regular userspace expects the definition.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250430-poll-v1-1-44b5ceabdeee@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Add nolibc support for m68k. Should be helpful for nommu where
linking libc can bloat even hello world to the point where you get
an OOM just trying to load it.
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Link: https://lore.kernel.org/r/20250426224738.284874-1-daniel@0x0f.com
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Inclusion of any nolibc header file should also bring all other headers.
On the other hand it should also be possible to include any nolibc header
files
in any order.
Currently this is implemented by including the catch-all nolibc.h after the
headers own definitions.
This is problematic if one nolibc header depends on another one.
The first header has to include the other one before defining any symbols.
That in turn will include the rest of nolibc while the current header has
not defined anything yet. If any other part of nolibc depends on
definitions from the current header, errors are encountered.
This is already the case today. Effectively nolibc can only be included in
the order of nolibc.h.
Restructure the way "nolibc.h" is included.
Move it to the beginning of the header files and before the include guards.
Now any header will behave exactly like "nolibc.h" while the include
guards prevent any duplicate definitions.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250424-nolibc-header-check-v1-2-011576b6ed6f@linutronix.de
|
|
Each nolibc header should be valid for inclusion irrespective of any
special ordering requirements.
Add a new make target, based on the old kbuild "make header_check" target
to validate this requirement.
For now the check fails, but the following commits will fix the issues.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250424-nolibc-header-check-v1-1-011576b6ed6f@linutronix.de
|
|
The prctl.h ABI header was slightly updated during the development of
the interface. In particular the "immutable" parameter became a bit in
the option argument.
Synchronize prctl.h ABI header again and make use of the definition in
the testsuite and "perf bench futex".
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20250517151455.1065363-5-bigeasy@linutronix.de
|
|
Add bind-tx netlink call to attach dmabuf for TX; queue is not
required, only ifindex and dmabuf fd for attachment.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250508004830.4100853-4-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Copy the fanotify uapi header files to the tools include dir
and define __kernel_fsid_t to decouple dependency with headers_install
and then remove the redundant re-definitions of fanotify macros.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/20250509133240.529330-6-amir73il@gmail.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Copy the required headers files (mount.h, nsfs.h) to the tools
include dir and define the statmount/listmount syscall numbers
to decouple dependency with headers_install for the common cases.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/20250509133240.529330-3-amir73il@gmail.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Adding support to retrieve ref_ctr_offset for uprobe perf link,
which got somehow omitted from the initial uprobe link info changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20250509153539.779599-2-jolsa@kernel.org
|
|
When switching network namespaces with the bpf_redirect_peer helper, the
skb->mark and skb->tstamp fields are not zeroed out like they can be on
a typical netns switch. This patch clarifies that in the helper
description.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/ccc86af26d43c5c0b776bcba2601b7479c0d46d0.1746460653.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Synchronize prctl.h with current uapi version after adding
PR_FUTEX_HASH.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-19-bigeasy@linutronix.de
|
|
printf can pad each argument to a certain width.
Implement this for compatibility with the kselftest harness.
Currently only padding with spaces is supported.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
Add more of the printf() functions.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
snprintf() allows limiting the output buffer, while still returning the
number of all bytes that would have been written.
Implement the limitation logic in preparation for snprintf().
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
Decouple the formatting logic from the writing logic to later enable
writing straight to a buffer in sprintf().
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
|
Paul Chaignon
Linus Torvalds
Saket Kumar Bhaskar
Kuniyuki Iwashima
Ingo Molnar
Ian Rogers
Thomas Weißschuh
Thomas Weißschuh
Daniel Palmer
Sebastian Andrzej Siewior
Stanislav Fomichev
Amir Goldstein
Jiri Olsa