aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/testing/selftests/bpf/test_sockmap.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-12-01selftests/bpf: Add ingress tests for txmsg with apply_bytesPengcheng Yang1-0/+18
Currently, the ingress redirect is not covered in "txmsg test apply". Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/1669718441-2654-5-git-send-email-yangpc@wangsu.com
2022-09-26selftests/bpf: Add wait send memory test for sockmap redirectLiu Jian1-0/+42
Add one test for wait redirect sock's send memory test for sockmap. Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20220823133755.314697-3-liujian56@huawei.com
2022-09-02selftests/bpf: Store BPF object files with .bpf.o extensionDaniel Müller1-2/+2
BPF object files are, in a way, the final artifact produced as part of the ahead-of-time compilation process. That makes them somewhat special compared to "regular" object files, which are a intermediate build artifacts that can typically be removed safely. As such, it can make sense to name them differently to make it easier to spot this difference at a glance. Among others, libbpf-bootstrap [0] has established the extension .bpf.o for BPF object files. It seems reasonable to follow this example and establish the same denomination for selftest build artifacts. To that end, this change adjusts the corresponding part of the build system and the test programs loading BPF object files to work with .bpf.o files. [0] https://github.com/libbpf/libbpf-bootstrap Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Müller <deso@posteo.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220901222253.1199242-1-deso@posteo.net
2022-04-10selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCKYafang Shao1-2/+3
We have switched to memcg-based memory accouting and thus the rlimit is not needed any more. LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK was introduced in libbpf for backward compatibility, so we can use it instead now. After this change, the header tools/testing/selftests/bpf/bpf_rlimit.h can be removed. This patch also removes the useless header sys/resource.h from many files in tools/testing/selftests/bpf/. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220409125958.92629-3-laoar.shao@gmail.com
2022-03-15selftests/bpf: Clean up array_size.cocci warningsGuo Zhengkui1-2/+2
Clean up the array_size.cocci warnings under tools/testing/selftests/bpf/: Use `ARRAY_SIZE(arr)` instead of forms like `sizeof(arr)/sizeof(arr[0])`. tools/testing/selftests/bpf/test_cgroup_storage.c uses ARRAY_SIZE() defined in tools/include/linux/kernel.h (sys/sysinfo.h -> linux/kernel.h), while others use ARRAY_SIZE() in bpf_util.h. Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220315130143.2403-1-guozhengkui@vivo.com
2021-11-01selftests, bpf: Add one test for sockmap with strparserLiu Jian1-3/+30
Add the test to check sockmap with strparser is working well. Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20211029141216.211899-3-liujian56@huawei.com
2021-11-01selftests, bpf: Fix test_txmsg_ingress_parser errorLiu Jian1-0/+2
After "skmsg: lose offset info in sk_psock_skb_ingress", the test case with ktls failed. This because ktls parser(tls_read_size) return value is 285 not 256. The case like this: tls_sk1 --> redir_sk --> tls_sk2 tls_sk1 sent out 512 bytes data, after tls related processing redir_sk recved 570 btyes data, and redirect 512 (skb_use_parser) bytes data to tls_sk2; but tls_sk2 needs 285 * 2 bytes data, receive timeout occurred. Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20211029141216.211899-2-liujian56@huawei.com
2021-03-04selftests/bpf: Simplify the calculation of variablesJiapeng Chong1-1/+1
Fix the following coccicheck warnings: ./tools/testing/selftests/bpf/test_sockmap.c:735:35-37: WARNING !A || A && B is equivalent to !A || B. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/1614757930-17197-1-git-send-email-jiapeng.chong@linux.alibaba.com
2020-12-03selftests/bpf: Fix invalid use of strncat in test_sockmapAndrii Nakryiko1-13/+23
strncat()'s third argument is how many bytes will be added *in addition* to already existing bytes in destination. Plus extra zero byte will be added after that. So existing use in test_sockmap has many opportunities to overflow the string and cause memory corruptions. And in this case, GCC complains for a good reason. Fixes: 16962b2404ac ("bpf: sockmap, add selftests") Fixes: 73563aa3d977 ("selftests/bpf: test_sockmap, print additional test options") Fixes: 1ade9abadfca ("bpf: test_sockmap, add options for msg_pop_data() helper") Fixes: 463bac5f1ca7 ("bpf, selftests: Add test for ktls with skb bpf ingress policy") Fixes: e9dd904708c4 ("bpf: add tls support for testing in test_sockmap") Fixes: 753fb2ee0934 ("bpf: sockmap, add msg_peek tests to test_sockmap") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201203235440.2302137-2-andrii@kernel.org
2020-10-11bpf, selftests: Add three new sockmap tests for verdict only programsJohn Fastabend1-1/+18
Here we add three new tests for sockmap to test having a verdict program without setting the parser program. The first test covers the most simply case, sender proxy_recv proxy_send recv | | | | verdict -----+ | | | | | +----------------+ +------------+ We load the verdict program on the proxy_recv socket without a parser program. It then does a redirect into the send path of the proxy_send socket using sendpage_locked(). Next we test the drop case to ensure if we kfree_skb as a result of the verdict program everything behaves as expected. Next we test the same configuration above, but with ktls and a redirect into socket ingress queue. Shown here tls tls sender proxy_recv proxy_send recv | | | | verdict ------------------+ | | redirect_ingress +----------------+ Also to set up ping/pong test Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160239302638.8495.17125996694402793471.stgit@john-Precision-5820-Tower
2020-10-11bpf, selftests: Add option to test_sockmap to omit adding parser programJohn Fastabend1-14/+21
Add option to allow running without a parser program in place. To test with ping/pong program use, # test_sockmap -t ping --txmsg_omit_skb_parser this will send packets between two socket bouncing through a proxy socket that does not use a parser program. (ping) (pong) sender proxy_recv proxy_send recv | | | | verdict -----+ | | | | | +----------------+ +------------+ Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160239300387.8495.11908295143121563076.stgit@john-Precision-5820-Tower
2020-10-02bpf, sockmap: Update selftests to use skb_adjust_roomJohn Fastabend1-21/+6
Instead of working around TLS headers in sockmap selftests use the new skb_adjust_room helper. This allows us to avoid special casing the receive side to skip headers. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160160100932.7052.3646935243867660528.stgit@john-Precision-5820-Tower
2020-08-01bpf, selftests: Use single cgroup helpers for both test_sockmap/progsJohn Fastabend1-16/+2
Nearly every user of cgroup helpers does the same sequence of API calls. So push these into a single helper cgroup_setup_and_join. The cases that do a bit of extra logic are test_progs which currently uses an env variable to decide if it needs to setup the cgroup environment or can use an existingi environment. And then tests that are doing cgroup tests themselves. We skip these cases for now. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159623335418.30208.15807461815525100199.stgit@john-XPS-13-9370
2020-06-28bpf, sockmap: Add ingres skb tests that utilize merge skbsJohn Fastabend1-0/+18
Add a test to check strparser merging skbs is working. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/159312681884.18340.4922800172600252370.stgit@john-XPS-13-9370
2020-06-01bpf, selftests: Add test for ktls with skb bpf ingress policyJohn Fastabend1-21/+142
This adds a test for bpf ingress policy. To ensure data writes happen as expected with extra TLS headers we run these tests with data verification enabled by default. This will test receive packets have "PASS" stamped into the front of the payload. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159079363965.5745.3390806911628980210.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-05-16bpf: Selftests, add ktls tests to test_sockmapJohn Fastabend1-26/+44
Until now we have only had minimal ktls+sockmap testing when being used with helpers and different sendmsg/sendpage patterns. Add a pass with ktls here. To run just ktls tests, $ ./test_sockmap --whitelist="ktls" Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939736278.15176.5435314315563203761.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, add blacklist to test_sockmapJohn Fastabend1-2/+31
This adds a blacklist to test_sockmap. For example, now we can run all apply and cork tests except those with timeouts by doing, $ ./test_sockmap --whitelist "apply,cork" --blacklist "hang" Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939734350.15176.6643981099665208826.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, add whitelist option to test_sockmapJohn Fastabend1-1/+30
Allow running specific tests with a comma deliminated whitelist. For example to run all apply and cork tests. $ ./test_sockmap --whitelist="cork,apply" Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939732464.15176.1959113294944564542.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, provide verbose option for selftests executionJohn Fastabend1-108/+71
Pass options from command line args into individual tests which allows us to use verbose option from command line with selftests. Now when verbose option is set individual subtest details will be printed. Also we can consolidate cgroup bring up and tear down. Additionally just setting verbose is very noisy so introduce verbose=1 and verbose=2. Really verbose=2 is only useful when developing tests or debugging some specific issue. For example now we get output like this with --verbose, #20/17 sockhash:txmsg test pull-data:OK [TEST 160]: (512, 1, 3, sendpage, pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0 [TEST 161]: (100, 1, 5, sendpage, pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0 [TEST 162]: (2, 1024, 256, sendpage, pop (4096,8192),): msg_loop_rx: iov_count 1 iov_buf 255 cnt 2 err 0 [TEST 163]: (512, 1, 3, sendpage, redir,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0 [TEST 164]: (100, 1, 5, sendpage, redir,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0 [TEST 165]: (512, 1, 3, sendpage, cork 512,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0 [TEST 166]: (100, 1, 5, sendpage, cork 512,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0 [TEST 167]: (512, 1, 3, sendpage, redir,cork 4,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0 [TEST 168]: (100, 1, 5, sendpage, redir,cork 4,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0 Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939730412.15176.1975675235035143367.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, break down test_sockmap into subtestsJohn Fastabend1-375/+348
At the moment test_sockmap runs all 800+ tests ungrouped which is not ideal because it makes it hard to see what is failing but also more importantly its hard to confirm all cases are tested. Additionally, after inspecting we noticed the runtime is bloated because we run many duplicate tests. Worse some of these tests are known error cases that wait for the recvmsg handler to timeout which creats long delays. Also we noted some tests were not clearing their options and as a result the following tests would run with extra and incorrect options. Fix this by reorganizing test code so its clear what tests are running and when. Then it becomes easy to remove duplication and run tests with only the set of send/recv patterns that are relavent. To accomplish this break test_sockmap into subtests and remove unnecessary duplication. The output is more readable now and the runtime reduced. Now default output prints subtests like this, $ ./test_sockmap # 1/ 6 sockmap:txmsg test passthrough:OK ... #22/ 1 sockhash:txmsg test push/pop data:OK Pass: 22 Fail: 0 Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939728384.15176.13601520183665880762.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, improve test_sockmap total bytes counterJohn Fastabend1-3/+8
The recv thread in test_sockmap waits to receive all bytes from sender but in the case we use pop data it may wait for more bytes then actually being sent. This stalls the test harness for multiple seconds. Because this happens in multiple tests it slows time to run the selftest. Fix by doing a better job of accounting for total bytes when pop helpers are used. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939726542.15176.5964532245173539540.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, print error in test_sockmap error casesJohn Fastabend1-8/+17
Its helpful to know the error value if an error occurs. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939724566.15176.12079885932643225626.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, sockmap test prog run without setting cgroupJohn Fastabend1-6/+22
Running test_sockmap with arguments to specify a test pattern requires including a cgroup argument. Instead of requiring this if the option is not provided create one This is not used by selftest runs but I use it when I want to test a specific test. Most useful when developing new code and/or tests. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939722675.15176.6294210959489131688.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, remove prints from sockmap testsJohn Fastabend1-19/+6
The prints in the test_sockmap programs were only useful when we didn't have enough control over test infrastructure to know from user program what was being pushed into kernel side. Now that we have or will shortly have better test controls lets remove the printers. This means we can remove half the programs and cleanup bpf side. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939720756.15176.9806965887313279429.stgit@john-Precision-5820-Tower
2020-01-24selftests: bpf: Use a temporary file in test_sockmapLorenz Bauer1-10/+5
Use a proper temporary file for sendpage tests. This means that running the tests doesn't clutter the working directory, and allows running the test on read-only filesystems. Fixes: 16962b2404ac ("bpf: sockmap, add selftests") Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200124112754.19664-2-lmb@cloudflare.com
2019-11-28selftests: bpf: correct perror stringsJakub Kicinski1-19/+19
perror(str) is basically equivalent to print("%s: %s\n", str, strerror(errno)). New line or colon at the end of str is a mistake/breaks formatting. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28selftests: bpf: test_sockmap: handle file creation failures gracefullyJakub Kicinski1-0/+9
test_sockmap creates a temporary file to use for sendpage. this may fail for various reasons. Handle the error rather than segfault. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-29selftests: bpf: remove duplicated includeYueHaibing1-1/+0
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-28bpf: test_sockmap, add options for msg_pop_data() helperJohn Fastabend1-4/+123
Similar to msg_pull_data and msg_push_data add a set of options to have msg_pop_data() exercised. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-20bpf: test_sockmap add options to use msg_push_dataJohn Fastabend1-3/+55
Add options to run msg_push_data, this patch creates two more flags in test_sockmap that can be used to specify the offset and length of bytes to be added. The new options are --txmsg_start_push to specify where bytes should be inserted and --txmsg_end_push to specify how many bytes. This is analagous to the options that are used to pull data, --txmsg_start and --txmsg_end. In addition to adding the options tests are added to the test suit to run the tests similar to what was done for msg_pull_data. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-17bpf: sockmap, add msg_peek tests to test_sockmapJohn Fastabend1-52/+115
Add tests that do a MSG_PEEK recv followed by a regular receive to test flag support. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-16bpf, tls: add tls header to tools infrastructureDaniel Borkmann1-5/+8
Andrey reported a build error for the BPF kselftest suite when compiled on a machine which does not have tls related header bits installed natively: test_sockmap.c:120:23: fatal error: linux/tls.h: No such file or directory #include <linux/tls.h> ^ compilation terminated. Fix it by adding the header to the tools include infrastructure and add definitions such as SOL_TLS that could potentially be missing. Fixes: e9dd904708c4 ("bpf: add tls support for testing in test_sockmap") Reported-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-15bpf: add tls support for testing in test_sockmapJohn Fastabend1-0/+89
This adds a --ktls option to test_sockmap in order to enable the combination of ktls and sockmap to run, which makes for another batch of 648 test cases for both in combination. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-08-29bpf: use --cgroup in test_suite if suppliedJohn Fastabend1-22/+31
If the user supplies a --cgroup value in the arguments when running the test_suite go ahaead and run the self tests there. I use this to test with multiple cgroup users. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-29bpf: sockmap test remove shutdown() callsJohn Fastabend1-3/+0
Currently, we do a shutdown(sk, SHUT_RDWR) on both peer sockets and a shutdown on the sender as well. However, this is incorrect and can occasionally cause issues if you happen to have bad timing. First peer1 or peer2 may still be in use depending on the test and timing. Second we really should only be closing the read side and/or write side depending on if the test is receiving or sending. But, really none of this is needed just remove the shutdown calls. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08bpf, sockmap: fix cork timeout for select due to epipeDaniel Borkmann1-1/+1
I ran into the same issue as a009f1f396d0 ("selftests/bpf: test_sockmap, timing improvements") where I had a broken pipe error on the socket due to remote end timing out on select and then shutting down it's sockets while the other side was still sending. We may need to do a bigger rework in general on the test_sockmap.c, but for now increase it to a more suitable timeout. Fixes: a18fda1a62c3 ("bpf: reduce runtime of test_sockmap tests") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-22tools/bpf: fix test_sockmap failureYonghong Song1-6/+0
On one of our production test machine, when running bpf selftest test_sockmap, I got the following error: # sudo ./test_sockmap libbpf: failed to create map (name: 'sock_map'): Operation not permitted libbpf: failed to load object 'test_sockmap_kern.o' libbpf: Can't get the 0th fd from program sk_skb1: only -1 instances ...... load_bpf_file: (-1) Operation not permitted ERROR: (-1) load bpf failed The error is due to not-big-enough rlimit struct rlimit r = {10 * 1024 * 1024, RLIM_INFINITY}; The test already includes "bpf_rlimit.h", which sets current and max rlimit to RLIM_INFINITY. Let us just use it. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-02selftests/bpf: test_sockmap, print additional test optionsPrashant Bhole1-9/+19
Print values of test options like apply, cork, start, end so that individual failed tests can be identified for manual run Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-02selftests/bpf: test_sockmap, fix data verificationPrashant Bhole1-1/+13
When data verification is enabled, some tests fail because verification is done incorrectly. Following changes fix it. - Identify the size of data block to be verified - Reset verification counter when data block size is reached - Fixed the value printed in case of verfication failure Fixes: 16962b2404ac ("bpf: sockmap, add selftests") Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-02selftests/bpf: test_sockmap, timing improvementsPrashant Bhole1-4/+9
Currently 10us delay is too low for many tests to succeed. It needs to be increased. Also, many corked tests are expected to hit rx timeout irrespective of timeout value. - This patch sets 1000usec timeout value for corked tests because less than that causes broken-pipe error in tx thread. Also sets 1 second timeout for all other tests because less than that results in RX timeout - tests with apply=1 and higher number of iterations were taking lot of time. This patch reduces test run time by reducing iterations. real 0m12.968s user 0m0.219s sys 0m14.337s Fixes: a18fda1a62c3 ("bpf: reduce runtime of test_sockmap tests") Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-02selftests/bpf: test_sockmap, join cgroup in selftest modePrashant Bhole1-0/+5
In case of selftest mode, temporary cgroup environment is created but cgroup is not joined. It causes test failures. Fixed by joining the cgroup Fixes: 16962b2404ac ("bpf: sockmap, add selftests") Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-02selftests/bpf: test_sockmap, check test failurePrashant Bhole1-6/+21
Test failures are not identified because exit code of RX/TX threads is not checked. Also threads are not returning correct exit code. - Return exit code from threads depending on test execution status - In main thread, check the exit code of RX/TX threads - Skip error checking for corked tests as they are expected to timeout Fixes: 16962b2404ac ("bpf: sockmap, add selftests") Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-16bpf: selftest additions for SOCKHASHJohn Fastabend1-7/+20
This runs existing SOCKMAP tests with SOCKHASH map type. To do this we push programs into include file and build two BPF programs. One for SOCKHASH and one for SOCKMAP. We then run the entire test suite with each type. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-25bpf: reduce runtime of test_sockmap testsJohn Fastabend1-17/+16
When test_sockmap was running outside of selftests and was not being run by build bots it was reasonable to spend significant amount of time running various tests. The number of tests is high because many different I/O iterators are run. However, now that test_sockmap is part of selftests rather than iterate through all I/O sides only test a minimal set of min/max values along with a few "normal" I/O ops. Also remove the long running tests. They can be run from other test frameworks on a regular cadence. This significanly reduces runtime of test_sockmap. Before: $ time sudo ./test_sockmap > /dev/null real 4m47.521s user 0m0.370s sys 0m3.131s After: $ time sudo ./test_sockmap > /dev/null real 0m0.514s user 0m0.104s sys 0m0.430s The CLI is still available for users that want to test the long running tests that do the larger send/recv tests. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-25bpf: sockmap, add selftestsJohn Fastabend1-0/+1465
This adds a new test program test_sockmap which is the old sample sockmap program. By moving the sample program here we can now run it as part of the self tests suite. To support this a populate_progs() routine is added to load programs and maps which was previously done with load_bpf_file(). This is needed because self test libs do not provide a similar routine. Also we now use the cgroup_helpers routines to manage cgroup use instead of manually creating one and supplying it to the CLI. Notice we keep the CLI around though because it is useful for dbg and specialized testing. To run use ./test_sockmap and the result should be, Summary 660 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.