| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add tests for both L2 and L3 CAT to verify the return values
generated by writing non-contiguous CBMs don't contradict the
reported non-contiguous support information.
Use a logical XOR to confirm return value of write_schemata() and
non-contiguous CBMs support information match.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Feature checking done by resctrl_mon_feature_exists() covers features
represented by the feature name presence inside the 'mon_features' file
in /sys/fs/resctrl/info/L3_MON directory. There exists a different way
to represent feature support and that is by the presence of 0 or 1 in a
single file in the info/resource directory. In this case the filename
represents what feature support is being indicated.
Add a generic function to check file presence in the
/sys/fs/resctrl/info/<RESOURCE> directory.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
validate_resctrl_feature_request() is used to test both if a resource is
present in the info directory, and if a passed monitoring feature is
present in the mon_features file.
Refactor validate_resctrl_feature_request() into two smaller functions
that each accomplish one check to give feature checking more
granularity:
- Resource directory presence in the /sys/fs/resctrl/info directory.
- Feature name presence in the /sys/fs/resctrl/info/<RESOURCE>/mon_features
file.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The CAT non-contiguous selftests have to read the file responsible for
reporting support of non-contiguous CBMs in kernel (resctrl). Then the
test compares if that information matches what is reported by CPUID
output.
Add a generic helper function to read an unsigned number from
/sys/fs/resctrl/info/<RESOURCE>/<FILE>.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
To select test to run -t parameter can be used. However, -t cat
currently maps to L3 CAT test which will be confusing after more CAT
related tests will be added.
Allow selecting tests as groups and call L3 CAT test "L3_CAT", "CAT"
group will enable all CAT related tests.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Domain id is acquired differently depending on CPU. AMD tests use id
from L3 cache, whereas CPUs from other vendors base the id on topology
package id. In order to support L2 CAT test, this has to be
generalized.
The driver side code seems to get the domain ids from cache ids so the
approach used by the AMD branch seems to match the kernel-side code. It
will also work with L2 domain IDs as long as the cache level is
generalized.
Using the topology id was always fragile due to mismatch with the
kernel-side way to acquire the domain id. It got incorrect domain id,
e.g., when Cluster-on-Die (CoD) is enabled for CPU (but CoD is not well
suited for resctrl in the first place so it has not been a big issue if
tests don't work correctly with it).
Taking all the above into account, generalize acquiring the domain id
by taking it from the cache id and do not hard-code the cache level.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Kernel-side calls the instances of a resource domains.
Change the resource_id naming in the selftest code to domain_id to
match the kernel side better.
Suggested-by: Maciej Wieczór-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
"L2"/"L3" conversion to integer is embedded into get_cache_size()
which prevents reuse.
Create a helper for the cache string to integer conversion to make
it reusable.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
write_schemata() takes the test name as an argument and determines the
relevant resource based on the test name. Such mapping from name to
resource does not really belong to resctrlfs.c that should provide
only generic, test-independent functions.
Pass the resource stored in the test information structure to
write_schemata() instead of the test name. The new API is also more
flexible as it enables to use write_schemata() for more than one
resource within a test.
While touching the sprintf(), move the unnecessary %c that is always
'=' directly into the format string.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Each test currently has a "run test" function in per test file and
another resctrl_tests.c. The functions in resctrl_tests.c are almost
identical.
Generalize the one in resctrl_tests.c such that it can be shared
between all of the tests. It makes adding new tests easier and removes
the per test if () forests.
Also add comment to CPU vendor IDs that they must be defined as bits
for a bitmask.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
resctrl_tests reads a set of parameters and passes them individually
for each tests which causes variations in the call signature between
the tests.
Add struct input_params to hold all input parameters. It can be easily
passed to every test without varying the call signature.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
CAT test does not reset the CPU affinity after the benchmark.
This is relatively harmless as is because CAT test is the last
benchmark to run, however, more tests may be added later.
Store the CPU affinity the first time taskset_benchmark() is run and
add taskset_restore() which the test can call to reset the CPU mask to
its original value.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
CAT test spawns two processes into two different control groups with
exclusive schemata. Both the processes alloc a buffer from memory
matching their allocated LLC block size and flush the entire buffer out
of caches. Since the processes are reading through the buffer only once
during the measurement and initially all the buffer was flushed, the
test isn't testing CAT.
Rewrite the CAT test to allocate a buffer sized to half of LLC. Then
perform a sequence of tests with different LLC alloc sizes starting
from half of the CBM bits down to 1-bit CBM. Flush the buffer before
each test and read the buffer twice. Observe the LLC misses on the
second read through the buffer. As the allocated LLC block gets smaller
and smaller, the LLC misses will become larger and larger giving a
strong signal on CAT working properly.
The new CAT test is using only a single process because it relies on
measured effect against another run of itself rather than another
process adding noise. The rest of the system is set to use the CBM bits
not used by the CAT test to keep the test isolated.
Replace count_bits() with count_contiguous_bits() to get the first bit
position in order to be able to calculate masks based on it.
This change has been tested with a number of systems from different
generations.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When reading memory in order, HW prefetching optimizations will
interfere with measuring how caches and memory are being accessed. This
adds noise into the results.
Change the fill_buf reading loop to not use an obvious in-order access
using multiply by a prime and modulo.
Using a prime multiplier with modulo ensures the entire buffer is
eventually read. 23 is small enough that the reads are spread out but
wrapping does not occur very frequently (wrapping too often can trigger
L2 hits more frequently which causes noise to the test because getting
the data from LLC is not required).
It was discovered that not all primes work equally well and some can
cause wildly unstable results (e.g., in an earlier version of this
patch, the reads were done in reversed order and 59 was used as the
prime resulting in unacceptably high and unstable results in MBA and
MBM test on some architectures).
Link: https://lore.kernel.org/linux-kselftest/TYAPR01MB6330025B5E6537F94DA49ACB8B499@TYAPR01MB6330.jpnprd01.prod.outlook.com/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The fill_buf code prevents compiler optimizating the entire read loop
away by writing the final value of the variable into a file. While it
achieves the goal, writing into a file requires significant amount of
work within the innermost test loop and also error handling.
A simpler approach is to take advantage of volatile. Writing through
a pointer to a volatile variable is enough to prevent compiler from
optimizing the write away, and therefore compiler cannot remove the
read loop either.
Add a volatile 'value_sink' into resctrl_tests.c and make fill_buf to
write into it. As a result, the error handling in fill_buf.c can be
simplified.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Perf fd (pe_fd) is opened, reset, and enabled during every test the CAT
selftest runs. Also, ioctl(pe_fd, ...) calls are not error checked even
if ioctl() could return an error.
Open perf fd only once before the tests and only reset and enable the
counter within the test loop. Add error checking to pe_fd ioctl()
calls.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The main CAT test function is called cat_val() and resides in cache.c
which is illogical.
Rename the function to cat_test() and move it into cat_test.c.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Perf related variables pea_llc_miss, pe_read, and pe_fd are globals in
cache.c.
Convert them to locals for better scoping and make pea_llc_miss simpler
by renaming it to pea. Make close(pe_fd) handling easier to understand
by doing it inside cat_val().
Make also sizeof()s use safer way to determine the right struct.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
struct perf_event_attr initialization is spread into
perf_event_initialize() and perf_event_attr_initialize() and setting
->config is hardcoded by the deepest level.
perf_event_attr init belongs to perf_event_attr_initialize() so move it
entirely there. Rename the other function
perf_event_initialized_read_format().
Call each init function directly from the test as they will take
different parameters (especially true after the perf related global
variables are moved to local variables).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Naming for perf event related functions, types, and variables is
inconsistent.
Make struct read_format and all functions related to perf events start
with "perf_". Adjust variable names towards the same direction but use
shorter names for variables where appropriate (pe prefix).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Perf event handling has functions that are the sole caller of another
perf event handling related function:
- reset_enable_llc_perf() calls perf_event_open_llc_miss()
- perf_event_measure() calls get_llc_perf()
Remove the extra layer of calls to make the code easier to follow by
moving the code into the calling function.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Perf counters are __u64 but the code converts them to unsigned long
before printing them out.
Remove unnecessary type conversion and retain the perf originating
value as __u64.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
show_cache_info() calculates results and provides generic cache
information. This makes it hard to alter pass/fail conditions.
Separate the test specific checks into CAT and CMT test files and
leave only the generic information part into show_cache_info().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
measure_cache_vals() does a different thing depending on the test case
that called it:
- For CAT, it measures LLC misses through perf.
- For CMT, it measures LLC occupancy through resctrl.
Split these two functionalities into own functions the CAT and CMT
tests can call directly. Replace passing the struct resctrl_val_param
parameter with the filename because it's more generic and all those
functions need out of resctrl_val.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
CAT test doesn't take shareable bits into account, i.e., the test might
be sharing cache with some devices (e.g., graphics).
Introduce get_mask_no_shareable() and use it to provision an
environment for CAT test where the allocated LLC is isolated better.
Excluding shareable_bits may create hole(s) into the cbm_mask, thus add
a new helper count_contiguous_bits() to find the longest contiguous set
of CBM bits.
create_bit_mask() is needed by an upcoming CAT test rewrite so make it
available in resctrl.h right away.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
CAT and CMT tests calculate size of the cache portion for the n-bits
cache allocation on their own.
Add cache_portion_size() helper that calculates size of the cache
portion for the given number of bits and use it to replace the existing
span calculations. This also prepares for the new CAT test that will
need to determine the size of the cache portion also during results
processing.
Rename also 'cache_size' local variables to 'cache_total_size' to
prevent misinterpretations.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
get_cache_size() does not modify cache_type so it could be const.
Mark cache_type const so that const char * can be passed to it. This
prevents warnings once many of the test parameters are marked const.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Callers of get_cbm_mask() are required to pass a string into which the
capacity bitmask (CBM) is read. Neither CAT nor CMT tests need the
bitmask as string but just convert it into an unsigned long value.
Another limitation is that the bit mask reader can only read
.../cbm_mask files.
Generalize the bit mask reading function into get_bit_mask() such that
it can be used to handle other files besides the .../cbm_mask and
handles the unsigned long conversion within get_bit_mask() using
fscanf(). Change get_cbm_mask() to use get_bit_mask() and rename it to
get_full_cbm() to better indicate what the function does.
Return error from get_full_cbm() if the bitmask is zero for some reason
because it makes the code more robust as the selftests naturally assume
the bitmask has some bits.
Also mark cache_type const while at it and remove useless comments that
are related to processing of CBM bits.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There are unnecessary nested calls in fill_buf.c:
- run_fill_buf() calls fill_cache()
- alloc_buffer() calls malloc_and_init_memory()
Simplify the code flow and remove those unnecessary call levels by
moving the called code inside the calling function and remove the
duplicated error print.
Resolve the difference in run_fill_buf() and fill_cache() parameter
name into 'buf_size' which is more descriptive than 'span'. Also, while
moving the allocation related code, rename 'p' into 'buf' to be
consistent in naming the variables.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
MBM, MBA and CMT test cases call run_fill_buf() that in turn calls
fill_cache() to alloc and loop indefinitely around the buffer. This
binds buffer allocation and running the benchmark into a single bundle
so that a selftest cannot allocate a buffer once and reuse it. CAT test
doesn't want to loop around the buffer continuously and after rewrite
it needs the ability to allocate the buffer separately.
Split buffer allocation out of fill_cache() into alloc_buffer(). This
change is part of preparation for the new CAT test that allocates a
buffer and does multiple passes over the same buffer (but not in an
infinite loop).
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
A number function comments state the function return non-zero on
failure but in reality they can only return 0 on success and < 0 on
error.
Update the comments to say < 0 on error to match the behavior.
While at it, improve cat_val() comment to state that 0 means the test
was run (either pass or fail).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
perf_event_open_llc_miss() calls ctrlc_handler() to cleanup if
perf_event_open() returns an error. Those cleanups, however, are not
the responsibility of perf_event_open_llc_miss() and it thus interferes
unnecessarily with the usual cleanup pattern. Worse yet,
ctrlc_handler() calls exit() in the end preventing the ordinary cleanup
done in the calling function from executing.
ctrlc_handler() should only be used as a signal handler, not during
normal error handling.
Remove call to ctrlc_handler() from perf_event_open_llc_miss(). As
unmounting resctrlfs and test cleanup are already handled properly
by error rollbacks in the calling functions, no other changes are
necessary.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
A number of functions in the resctrl selftests return errno. It is
problematic because errno is positive which is often counterintuitive.
Also, every site returning errno prints the error message already with
ksft_perror() so there is not much added value in returning the precise
error code.
Simply convert all places returning errno to return -1 that is typical
userspace error code in case of failures.
While at it, improve resctrl_val() comment to state that 0 means the
test was run (either pass or fail).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The resctrl selftest code contains a number of perror() calls. Some of
them come with hash character and some don't. The kselftest framework
provides ksft_perror() that is compatible with test output formatting
so it should be used instead of adding custom hash signs.
Some perror() calls are too far away from anything that sets error.
For those call sites, ksft_print_msg() must be used instead.
Convert perror() to ksft_perror() or ksft_print_msg().
Other related changes:
- Remove hash signs
- Remove trailing stops & newlines from ksft_perror()
- Add terminating newlines for converted ksft_print_msg()
- Use consistent capitalization
- Small fixes/tweaks to typos & grammar of the messages
- Extract error printing out of PARENT_EXIT() to be able to
differentiate
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 20d96b25cc4c ("selftests/resctrl: Fix schemata write error
check") exposed a problem in feature detection logic in MBM selftest.
If schemata does not support MB:x=x entries, the schemata write to
initialize 100% memory bandwidth allocation in mbm_setup() will now
fail with -EINVAL due to the error handling corrected by the commit
20d96b25cc4c ("selftests/resctrl: Fix schemata write error check").
That commit just uncovers the failed write, it is not wrong itself.
If MB:x=x is not supported by schemata, it is safe to assume 100%
memory bandwidth is always set. Therefore, the previously ignored error
does not make the MBM test itself wrong.
Restore the previous behavior of MBM test by checking MB support before
attempting to write it into schemata which results in behavior
equivalent to ignoring the write error.
Fixes: 20d96b25cc4c ("selftests/resctrl: Fix schemata write error check")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
resctrlfs.c contains mostly functions that interact in some way with
resctrl FS entries while functions inside resctrl_val.c deal with
measurements and benchmarking.
run_benchmark() is located in resctrlfs.c even though it's purpose
is not interacting with the resctrl FS but to execute cache checking
logic.
Move run_benchmark() to resctrl_val.c just before resctrl_val() that
makes use of run_benchmark(). Make run_benchmark() static since it's
not used between multiple files anymore.
Remove return comment from kernel-doc since the function is type void.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Writing bitmasks to the schemata can fail when the bitmask doesn't
adhere to constraints defined by what a particular CPU supports.
Some example of constraints are max length or having contiguous bits.
The driver should properly return errors when any rule concerning
bitmask format is broken.
Resctrl FS returns error codes from fprintf() only when fclose() is
called. Current error checking scheme allows invalid bitmasks to be
written into schemata file and the selftest doesn't notice because the
fclose() error code isn't checked.
Substitute fopen(), flose() and fprintf() with open(), close() and
write() to avoid error code buffering between fprintf() and fclose().
Remove newline character from the schema string after writing it to
the schemata file so it prints correctly before function return.
Pass the string generated with strerror() to the "reason" buffer so
the error message is more verbose. Extend "reason" buffer so it can hold
longer messages.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The initial value of 5% chosen for the maximum allowed percentage
difference between resctrl mbm value and IMC mbm value in
commit 06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting
format") was "randomly chosen value" (as admitted by the changelog).
When running tests in our lab across a large number platforms, 5%
difference upper bound for success seems a bit on the low side for the
MBA and MBM tests. Some platforms produce outliers that are slightly
above that, typically 6-7%, which leads MBA/MBM test frequently
failing.
Replace the "randomly chosen value" with a success bound that is based
on those measurements across large number of platforms by relaxing the
MBA/MBM success bound to 8%. The relaxed bound removes the failures due
the frequent outliers.
Fixed commit description style error during merge:
Shuah Khan <skhan@linuxfoundation.org>
Fixes: 06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting format")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The MBA and CMT tests expect support of other features to be able to
run.
When platform only supports MBA but not MBM, MBA test will fail with:
Failed to open total bw file: No such file or directory
When platform only supports CMT but not CAT, CMT test will fail with:
Failed to open bit mask file '/sys/fs/resctrl/info/L3/cbm_mask': No such file or directory
It leads to the test reporting test fail (even if no test was run at
all).
Extend feature checks to cover these two conditions to show these tests
were skipped rather than failed.
Fixes: ee0415681eb6 ("selftests/resctrl: Use resctrl/info for feature detection")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org> # selftests/resctrl: Refactor feature check to use resource and feature name
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Feature check in validate_resctrl_feature_request() takes in the test
name string and maps that to what to check per test.
Pass resource and feature names to validate_resctrl_feature_request()
directly rather than deriving them from the test name inside the
function which makes the feature check easier to extend for new test
cases.
Use !! in the return statement to make the boolean conversion more
obvious even if it is not strictly necessary from correctness point of
view (to avoid it looking like the function is returning a freed
pointer).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org> # selftests/resctrl: Remove duplicate feature check from CMT test
Cc: <stable@vger.kernel.org> # selftests/resctrl: Move _GNU_SOURCE define into Makefile
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
_GNU_SOURCE is defined in resctrl.h. Defining _GNU_SOURCE has a large
impact on what gets defined when including headers either before or
after it. This can result in compile failures if .c file decides to
include a standard header file before resctrl.h.
It is safer to define _GNU_SOURCE in Makefile so it is always defined
regardless of in which order includes are done.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The test runner run_cmt_test() in resctrl_tests.c checks for CMT
feature and does not run cmt_resctrl_val() if CMT is not supported.
Then cmt_resctrl_val() also check is CMT is supported.
Remove the duplicated feature check for CMT from cmt_resctrl_val().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Unmounting resctrl FS has been moved into the per test functions in
resctrl_tests.c by commit caddc0fbe495 ("selftests/resctrl: Move
resctrl FS mount/umount to higher level"). In case a signal (SIGINT,
SIGTERM, or SIGHUP) is received, the running selftest is aborted by
ctrlc_handler() which then unmounts resctrl fs before exiting. The
current section between signal_handler_register() and
signal_handler_unregister(), however, does not cover the entire
duration when resctrl FS is mounted.
Move signal_handler_register() and signal_handler_unregister() calls
from per test files into resctrl_tests.c to properly unmount resctrl
fs. In order to not add signal_handler_register()/unregister() n times,
create helpers test_prepare() and test_cleanup().
Do not call ksft_exit_fail_msg() in test_prepare() but only in the per
test function to keep the control flow cleaner without adding calls to
exit() deep into the call chain.
Adjust child process kill() call in ctrlc_handler() to only be invoked
if the child was already forked.
Fixes: caddc0fbe495 ("selftests/resctrl: Move resctrl FS mount/umount to higher level")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
signal_handler_unregister() calls sigaction() with uninitializing
sa_flags in the struct sigaction.
Make sure sa_flags is always initialized in signal_handler_unregister()
by initializing the struct sigaction when declaring it. Also add the
initialization to signal_handler_register() even if there are no know
bugs in there because correctness is then obvious from the code itself.
Fixes: 73c55fa5ab55 ("selftests/resctrl: Commonize the signal handler register/unregister for all tests")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Benchmark argument is handled by custom argument parsing code which is
more complicated than it needs to be.
Process benchmark argument within the normal getopt() handling and drop
unnecessary ben_ind and has_ben variables. When -b is given, terminate
the argument processing as -b consumes all remaining arguments.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
ben_count is only used to write the terminator for the list. It is
enough to use i from the loop so no need for another variable.
Remove ben_count variable as it is not needed.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Benchmark command is used in multiple tests so it should not be
mutated by the tests but CMT test alters span argument. Due to the
order of tests (CMT test runs last), mutating the span argument in CMT
test does not trigger any real problems currently.
Mark benchmark_cmd strings as const and setup the benchmark command
using pointers. Because the benchmark command becomes const, the input
arguments can be used directly. Besides being simpler, using the input
arguments directly also removes the internal size restriction.
CMT test has to create a copy of the benchmark command before altering
the benchmark command.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Benchmark command is initialized before resctrl FS check and
preparation code that can call ksft_exit_skip(). There is no strong
reason why the resctrl FS support check and unmounting it (if already
mounted), has to be done after the benchmark command initialization.
Move benchmark command initialization such that it is done not until
right before the tests commence. This simplifies rollback handling when
benchmark command initialization starts to use dynamic allocation (in a
change following this).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
struct resctrl_val_param contains span member. resctrl_val(), however,
never uses it because the value of span is embedded into the default
benchmark command and parsed from it by run_benchmark().
Remove span from resctrl_val_param. Provide DEFAULT_SPAN for the code
that needs it. CMT and CAT tests communicate span that is different
from the DEFAULT_SPAN between their internal functions which is
converted into passing it directly as a parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
bw_report is always set to "reads" and bm_type is set to "fill_buf" but
is never used.
Set bw_report directly to "reads" in MBA/MBM test and remove bm_type.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
Maciej Wieczor-Retman
Ilpo Järvinen