| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
|
|
Pull seccomp updates from Kees Cook:
"There are no core kernel changes here; it's entirely selftests and
samples:
- Improve reliability of selftests (Terry Tritton, Kees Cook)
- Fix strict-aliasing warning in samples (Arnd Bergmann)"
* tag 'seccomp-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
samples: user-trap: fix strict-aliasing warning
selftests/seccomp: Pin benchmark to single CPU
selftests/seccomp: user_notification_addfd check nextfd is available
selftests/seccomp: Change the syscall used in KILL_THREAD test
selftests/seccomp: Handle EINVAL on unshare(CLONE_NEWPID)
|
|
Instead of tracking passed = 0/1 rename the field to exit_code
and invert the values so that they match the KSFT_* exit codes.
This will allow us to fold SKIP / XFAIL into the same value.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The seccomp benchmark test (for validating the benefit of bitmaps) can
be sensitive to scheduling speed, so pin the process to a single CPU,
which appears to significantly improve reliability, and loosen the
"close enough" checking to allow up to 10% variance instead of 1%.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402061002.3a8722fd-oliver.sang@intel.com
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Currently the user_notification_addfd test checks what the next expected
file descriptor will be by incrementing a variable nextfd. This does not
account for file descriptors that may already be open before the test is
started and will cause the test to fail if any exist.
Replace nextfd++ with a function get_next_fd which will check and return
the next available file descriptor.
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Link: https://lore.kernel.org/r/20240124141357.1243457-4-terry.tritton@linaro.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The Bionic version of pthread_create used on Android calls the prctl
function to give the stack and thread local storage a useful name. This
will cause the KILL_THREAD test to fail as it will kill the thread as
soon as it is created.
change the test to use getpid instead of prctl.
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Link: https://lore.kernel.org/r/20240124141357.1243457-3-terry.tritton@linaro.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
unshare(CLONE_NEWPID) can return EINVAL if the kernel does not have the
CONFIG_PID_NS option enabled.
Add a check on these calls to skip the test if we receive EINVAL.
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Link: https://lore.kernel.org/r/20240124141357.1243457-2-terry.tritton@linaro.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The seccomp benchmark test makes a number of checks on the performance it
measures and logs them to the output but does so in a custom format which
none of the automated test runners understand meaning that the chances that
anyone is paying attention are slim. Let's additionally log each result in
KTAP format so that automated systems parsing the test output will see each
comparison as a test case. The original logs are left in place since they
provide the actual numbers for analysis.
As part of this rework the flow for the main program so that when we skip
tests we still log all the tests we skip, this is because the standard KTAP
headers and footers include counts of the number of expected and run tests.
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
In preparation for trying to output the test results themselves in TAP
format rework all the prints in the benchmark to use the kselftest output
functions. The uses of system() all produce single line output so we can
avoid having to deal with fully managing the child process and continue to
use system() by simply printing an empty message before we invoke system().
We also leave one printf() used to complete a line of output in place.
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
It turns out arm32 doesn't handle syscall -1 gracefully, so skip testing
for that. Additionally skip tests that depend on clone3 when it is not
available (for example when building the seccomp selftests on an old arm
image without clone3 headers). And improve error reporting for when
nanosleep fails, as seen on arm32 since v5.15.
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Test output:
# RUN global.user_notification_sync ...
# OK global.user_notification_sync
ok 51 global.user_notification_sync
Signed-off-by: Andrei Vagin <avagin@google.com>
Acked-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230308073201.3102738-6-avagin@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Pull LoongArch updates from Huacai Chen:
- Make -mstrict-align configurable
- Add kernel relocation and KASLR support
- Add single kernel image implementation for kdump
- Add hardware breakpoints/watchpoints support
- Add kprobes/kretprobes/kprobes_on_ftrace support
- Add LoongArch support for some selftests.
* tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (23 commits)
selftests/ftrace: Add LoongArch kprobe args string tests support
selftests/seccomp: Add LoongArch selftesting support
tools: Add LoongArch build infrastructure
samples/kprobes: Add LoongArch support
LoongArch: Mark some assembler symbols as non-kprobe-able
LoongArch: Add kprobes on ftrace support
LoongArch: Add kretprobes support
LoongArch: Add kprobes support
LoongArch: Simulate branch and PC* instructions
LoongArch: ptrace: Add hardware single step support
LoongArch: ptrace: Add function argument access API
LoongArch: ptrace: Expose hardware breakpoints to debuggers
LoongArch: Add hardware breakpoints/watchpoints support
LoongArch: kdump: Add crashkernel=YM handling
LoongArch: kdump: Add single kernel image implementation
LoongArch: Add support for kernel address space layout randomization (KASLR)
LoongArch: Add support for kernel relocation
LoongArch: Add la_abs macro implementation
LoongArch: Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs
LoongArch: Use la.pcrel instead of la.abs when it's trivially possible
...
|
|
BPF for LoongArch is supported now, add the selftesting support in
seccomp_bpf.c.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Pull Kselftest update from Shuah Khan:
- several patches to fix incorrect kernel headers search path from
Mathieu Desnoyers
- a few follow-on fixes found during testing the above change
- miscellaneous fixes
- support for filtering and enumerating tests
* tag 'linux-kselftest-next-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (40 commits)
selftests/user_events: add a note about user_events.h dependency
selftests/mount_setattr: fix to make run_tests failure
selftests/mount_setattr: fix redefine struct mount_attr build error
selftests/sched: fix warn_unused_result build warns
selftests/ptp: Remove clean target from Makefile
selftests: use printf instead of echo -ne
selftests/ftrace: Fix bash specific "==" operator
selftests: tpm2: remove redundant ord()
selftests: find echo binary to use -ne options
selftests: Fix spelling mistake "allright" -> "all right"
selftests: tdx: Use installed kernel headers search path
selftests: ptrace: Use installed kernel headers search path
selftests: memfd: Use installed kernel headers search path
selftests: iommu: Use installed kernel headers search path
selftests: x86: Fix incorrect kernel headers search path
selftests: vm: Fix incorrect kernel headers search path
selftests: user_events: Fix incorrect kernel headers search path
selftests: sync: Fix incorrect kernel headers search path
selftests: seccomp: Fix incorrect kernel headers search path
selftests: sched: Fix incorrect kernel headers search path
...
|
|
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add m68k seccomp definitions to seccomp_bpf self test code.
Tested on ARAnyM.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230112035529.13521-4-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
In the "mode_filter_without_nnp" test in seccomp_bpf, there is currently
a TODO which asks to check the capability CAP_SYS_ADMIN instead of euid.
This patch adds support to check if the calling process has the flag
CAP_SYS_ADMIN, and also if this flag has CAP_EFFECTIVE set.
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220731092529.28760-1-gautammenghani201@gmail.com
|
|
clang has -Wconstant-conversion by default, and the constant 0xAAAAAAAAA
(9 As) being converted to an int, which is generally 32 bits, results
in the compile warning:
clang -Wl,-no-as-needed -Wall -isystem ../../../../usr/include/ -lpthread seccomp_bpf.c -lcap -o seccomp_bpf
seccomp_bpf.c:812:67: warning: implicit conversion from 'long' to 'int' changes value from 45812984490 to -1431655766 [-Wconstant-conversion]
int kill = kill_how == KILL_PROCESS ? SECCOMP_RET_KILL_PROCESS : 0xAAAAAAAAA;
~~~~ ^~~~~~~~~~~
1 warning generated.
-1431655766 is the expected truncation, 0xAAAAAAAA (8 As), so use
this directly in the code to avoid the warning.
Fixes: 3932fcecd962 ("selftests/seccomp: Add test for unknown SECCOMP_RET kill behavior")
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220526223407.1686936-1-zhuyifei@google.com
|
|
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220504155535.239180-1-colin.i.king@gmail.com
|
|
This verifies that if a filter is set up with the wait killable feature
that it obeys the semantics that non-fatal signals are ignored during
a notification after the notification is received.
Cases tested:
* Non-fatal signal prior to receive
* Non-fatal signal during receive
* Fatal signal after receive
The normal signal handling is tested in user_notification_signal. That
behaviour remains unchanged.
On an unsupported kernel, these tests will immediately bail as it relies
on a new seccomp flag.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503080958.20220-4-sargun@sargun.me
|
|
This splits up the get_proc_stat function to make it so we can use it as a
generic helper to read the nth field from multiple different files, versus
replicating the logic in multiple places.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503080958.20220-3-sargun@sargun.me
|
|
When multiple notifications are waiting, ensure they show up in order, as
defined by the (predictable) seccomp notification ID. This ensures FIFO
ordering of notification delivery as notification ids are monitonic and
decided when the notification is generated (as opposed to received).
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: linux-kselftest@vger.kernel.org
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220428015447.13661-2-sargun@sargun.me
|
|
Running the seccomp tests under the kernel with "defconfig"
shouldn't fail. Because the CONFIG_USER_NS is not supported
in "defconfig". Skipping this case instead of failing it is
better.
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/7f7687696a5c0a2d040a24474616e945c7cf2bb5.1648599460.git.yang.guang5@zte.com.cn
|
|
Add a test to check that PTRACE_O_SUSPEND_SECCOMP can't be set without
CAP_SYS_ADMIN through PTRACE_SEIZE or PTRACE_SETOPTIONS.
Signed-off-by: Jann Horn <jannh@google.com>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Since commit 92d25637a3a4 ("kselftest: signal all child processes"), tests
are executed in background process groups. This means that trying to read
from stdin now throws SIGTTIN when stdin is a TTY, which breaks some
seccomp selftests that try to use read(0, NULL, 0) as a dummy syscall.
The simplest way to fix that is probably to just use -1 instead of 0 as
the dummy read()'s FD.
Fixes: 92d25637a3a4 ("kselftest: signal all child processes")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220319010011.1374622-1-jannh@google.com
|
|
seccomp_bpf failed on tests 47 global.user_notification_filter_empty
and 48 global.user_notification_filter_empty_threaded when it's
tested on updated kernel but with old kernel headers. Because old
kernel headers don't have definition of macro __NR_clone3 which is
required for these two tests. Since under selftests/, we can install
headers once for all tests (the default INSTALL_HDR_PATH is
usr/include), fix it by adding usr/include to the list of directories
to be searched. Use "-isystem" to indicate it's a system directory as
the real kernel headers directories are.
Signed-off-by: Sherry Yang <sherry.yang@oracle.com>
Tested-by: Sherry Yang <sherry.yang@oracle.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Pull Kselftest update from Shuah Khan:
"Fixes to build errors, false negatives, and several code cleanups,
including the ARRAY_SIZE cleanup that removes 25+ duplicates
ARRAY_SIZE defines from individual tests"
* tag 'linux-kselftest-next-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/vm: remove ARRAY_SIZE define from individual tests
selftests/timens: remove ARRAY_SIZE define from individual tests
selftests/sparc64: remove ARRAY_SIZE define from adi-test
selftests/seccomp: remove ARRAY_SIZE define from seccomp_benchmark
selftests/rseq: remove ARRAY_SIZE define from individual tests
selftests/net: remove ARRAY_SIZE define from individual tests
selftests/landlock: remove ARRAY_SIZE define from common.h
selftests/ir: remove ARRAY_SIZE define from ir_loopback.c
selftests/core: remove ARRAY_SIZE define from close_range_test.c
selftests/cgroup: remove ARRAY_SIZE define from cgroup_util.h
selftests/arm64: remove ARRAY_SIZE define from vec-syscfg.c
tools: fix ARRAY_SIZE defines in tools and selftests hdrs
selftests: cgroup: build error multiple outpt files
selftests/move_mount_set_group remove unneeded conversion to bool
selftests/mount: remove unneeded conversion to bool
selftests: harness: avoid false negatives if test has no ASSERTs
selftests/ftrace: make kprobe profile testcase description unique
selftests: clone3: clone3: add case CLONE3_ARGS_NO_TEST
selftests: timers: Remove unneeded semicolon
kselftests: timers:Remove unneeded semicolon
|
|
Pull seccomp updates from Kees Cook:
"The core seccomp code hasn't changed for this cycle, but the selftests
were improved while helping to debug the recent signal handling
refactoring work Eric did.
Summary:
- Improve seccomp selftests in support of signal handler refactoring
(Kees Cook)"
* tag 'seccomp-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Report event mismatches more clearly
selftests/seccomp: Stop USER_NOTIF test if kcmp() fails
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from seccomp_benchmark and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When running under tracer, more explicitly report the status and event
mismatches to help with debugging. Additionally add an "immediate kill"
test when under tracing to verify that fatal SIGSYS behaves the same
under ptrace or seccomp tracing.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/20211103163039.2104830-3-keescook@chromium.org
|
|
If kcmp() fails during the USER_NOTIF test, the test is likely to hang,
so switch from EXPECT to ASSERT.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/20211103163039.2104830-2-keescook@chromium.org
|
|
Use the compiler-defined __BYTE_ORDER__ instead of the libc-defined
__BYTE_ORDER for consistency.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-6-iii@linux.ibm.com
|
|
Pull seccomp updates from Kees Cook:
- Add "atomic addfd + send reply" mode to SECCOMP_USER_NOTIF to better
handle EINTR races visible to seccomp monitors. (Rodrigo Campos,
Sargun Dhillon)
- Improve seccomp selftests for readability in CI systems. (Kees Cook)
* tag 'seccomp-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Avoid using "sysctl" for report
selftests/seccomp: Flush benchmark output
selftests/seccomp: More closely track fds being assigned
selftests/seccomp: Add test for atomic addfd+send
seccomp: Support atomic "addfd + send reply"
|
|
Instead of depending on "sysctl" being installed, just use "grep -H" for
sysctl status reporting. Additionally report kernel version for easier
comparisons.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
When running the seccomp benchmark under a test runner, it wouldn't
provide any feedback on progress. Set stdout unbuffered.
Suggested-by: Will Drewry <wad@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Since the open fds might not always start at "4" (especially when
running under kselftest, etc), start counting from the first assigned
fd, rather than using the more permissive EXPECT_GE(fd, 0).
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20210527032948.3730953-1-keescook@chromium.org
Reviewed-by: Rodrigo Campos <rodrigo@kinvolk.io>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
This just adds a test to verify that when using the new introduced flag
to ADDFD, a valid fd is added and returned as the syscall result.
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210517193908.3113-5-sargun@sargun.me
|
|
The sc and scv 0 system calls have different ABI conventions, and
ptracers need to know which system call type is being used if they want
to look at the syscall registers.
Document that pt_regs.trap can be used for this, and fix one in-tree user
to work with scv 0 syscalls.
Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: "Dmitry V. Levin" <ldv@altlinux.org>
Suggested-by: "Dmitry V. Levin" <ldv@altlinux.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210520111931.2597127-1-npiggin@gmail.com
|
|
Pull kcmp kconfig update from Daniel Vetter:
"Make the kcmp syscall available independently of checkpoint/restore.
drm userspaces uses this, systemd uses this, so makes sense to pull it
out from the checkpoint-restore bundle.
Kees reviewed this from security pov and is happy with the final
version"
Link: https://lwn.net/Articles/845448/
* tag 'topic/kcmp-kconfig-2021-02-22' of git://anongit.freedesktop.org/drm/drm:
kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTORE
|
|
Userspace has discovered the functionality offered by SYS_kcmp and has
started to depend upon it. In particular, Mesa uses SYS_kcmp for
os_same_file_description() in order to identify when two fd (e.g. device
or dmabuf) point to the same struct file. Since they depend on it for
core functionality, lift SYS_kcmp out of the non-default
CONFIG_CHECKPOINT_RESTORE into the selectable syscall category.
Rasmus Villemoes also pointed out that systemd uses SYS_kcmp to
deduplicate the per-service file descriptor store.
Note that some distributions such as Ubuntu are already enabling
CHECKPOINT_RESTORE in their configs and so, by extension, SYS_kcmp.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3046
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> # DRM depends on kcmp
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> # systemd uses kcmp
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205220012.1983-1-chris@chris-wilson.co.uk
|
|
This test expects fds to have specific values, which works fine
when the test is run standalone. However, the kselftest runner
consumes a couple of extra fds for redirection when running
tests, so the test fails when run via kselftest.
Change the test to pass on any valid fd number.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
seccomp_bpf.c uses unshare(CLONE_NEWPID), which requires CONFIG_PID_NS
to be set.
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201202162643.249276-1-mic@digikod.net
|
|
|
|
As part of the seccomp benchmarking, include the expectations with
regard to the timing behavior of the constant action bitmaps, and report
inconsistencies better.
Example output with constant action bitmaps on x86:
$ sudo ./seccomp_benchmark 100000000
Current BPF sysctl settings:
net.core.bpf_jit_enable = 1
net.core.bpf_jit_harden = 0
Benchmarking 200000000 syscalls...
129.359381409 - 0.008724424 = 129350656985 (129.4s)
getpid native: 646 ns
264.385890006 - 129.360453229 = 135025436777 (135.0s)
getpid RET_ALLOW 1 filter (bitmap): 675 ns
399.400511893 - 264.387045901 = 135013465992 (135.0s)
getpid RET_ALLOW 2 filters (bitmap): 675 ns
545.872866260 - 399.401718327 = 146471147933 (146.5s)
getpid RET_ALLOW 3 filters (full): 732 ns
696.337101319 - 545.874097681 = 150463003638 (150.5s)
getpid RET_ALLOW 4 filters (full): 752 ns
Estimated total seccomp overhead for 1 bitmapped filter: 29 ns
Estimated total seccomp overhead for 2 bitmapped filters: 29 ns
Estimated total seccomp overhead for 3 full filters: 86 ns
Estimated total seccomp overhead for 4 full filters: 106 ns
Estimated seccomp entry overhead: 29 ns
Estimated seccomp per-filter overhead (last 2 diff): 20 ns
Estimated seccomp per-filter overhead (filters / 4): 19 ns
Expectations:
native ≤ 1 bitmap (646 ≤ 675): ✔️
native ≤ 1 filter (646 ≤ 732): ✔️
per-filter (last 2 diff) ≈ per-filter (filters / 4) (20 ≈ 19): ✔️
1 bitmapped ≈ 2 bitmapped (29 ≈ 29): ✔️
entry ≈ 1 bitmapped (29 ≈ 29): ✔️
entry ≈ 2 bitmapped (29 ≈ 29): ✔️
native + entry + (per filter * 4) ≈ 4 filters total (755 ≈ 752): ✔️
[YiFei: Changed commit message to show stats for this patch series]
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/1b61df3db85c5f7f1b9202722c45e7b39df73ef2.1602431034.git.yifeifz2@illinois.edu
|
|
It looks like the seccomp selftests was never actually built for sh.
This fixes it, though I don't have an environment to do a runtime test
of it yet.
Fixes: 0bb605c2c7f2b4b3 ("sh: Add SECCOMP_FILTER")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/lkml/a36d7b48-6598-1642-e403-0c77a86f416d@physik.fu-berlin.de
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
A typo sneaked into the powerpc selftest. Fix the name so it builds again.
Fixes: 46138329faea ("selftests/seccomp: powerpc: Fix seccomp return value testing")
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/87y2ix2895.fsf@mpe.ellerman.id.au
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
As the UAPI headers start to appear in distros, we need to avoid
outdated versions of struct clone_args to be able to test modern
features, named "struct __clone_args". Additionally update the struct
size macro names to match UAPI names.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/lkml/20200921075432.u4gis3s2o5qrsb5g@wittgenstein/
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Some archs (like powerpc) only support changing the return code during
syscall exit when ptrace is used. Test entry vs exit phases for which
portions of the syscall number and return values need to be set at which
different phases. For non-powerpc, all changes are made during ptrace
syscall entry, as before. For powerpc, the syscall number is changed at
ptrace syscall entry and the syscall return value is changed on ptrace
syscall exit.
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Suggested-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Link: https://lore.kernel.org/linux-kselftest/20200911181012.171027-1-cascardo@canonical.com/
Fixes: 58d0a862f573 ("seccomp: add tests for ptrace hole")
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/lkml/20200921075300.7iylzof2w5vrutah@wittgenstein/
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In preparation for setting syscall nr and ret values separately, refactor
the helpers to take a pointer to a value, so that a NULL can indicate
"do not change this respective value". This is done to keep the regset
read/write happening once and in one code path.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/lkml/20200921075031.j4gruygeugkp2zwd@wittgenstein/
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In preparation for performing actions during ptrace syscall exit, save
the syscall number during ptrace syscall entry. Some architectures do
no have the syscall number available during ptrace syscall exit.
Suggested-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Link: https://lore.kernel.org/linux-kselftest/20200911181012.171027-1-cascardo@canonical.com/
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/lkml/20200921074354.6shkt2e5yhzhj3sn@wittgenstein/
Signed-off-by: Kees Cook <keescook@chromium.org>
|
Linus Torvalds
Jakub Kicinski
Kees Cook
Terry Tritton
Mark Brown
Andrei Vagin
Huacai Chen
Mathieu Desnoyers
Michael Schmitz
Gautam Menghani
YiFei Zhu
Colin Ian King
Sargun Dhillon
Yang Guang
Jann Horn
Sherry Yang
Shuah Khan
Ilya Leoshkevich
Rodrigo Campos
Nicholas Piggin
Chris Wilson
Seth Forshee
Mickaël Salaün