spelling

12 files changed, 27 insertions, 27 deletions

diff --git a/sys/crypto/set_key.c b/sys/crypto/set_key.c
index fcc3174d372..0f2595d6197 100644
--- a/sys/crypto/set_key.c
+++ b/sys/crypto/set_key.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: set_key.c,v 1.4 2015/12/10 21:00:51 naddy Exp $	*/
+/*	$OpenBSD: set_key.c,v 1.5 2021/03/12 10:22:46 jsg Exp $	*/
 
 /* lib/des/set_key.c */
 /* Copyright (C) 1995 Eric Young (eay@mincom.oz.au)
@@ -110,7 +110,7 @@ des_is_weak_key(des_cblock (*key))
 	int i;
 
 	for (i = 0; i < NUM_WEAK_KEY; i++) {
-		/* Added == 0 to comparision, I obviously don't run
+		/* Added == 0 to comparison, I obviously don't run
 		 * this section very often :-(, thanks to
 		 * engineering@MorningStar.Com for the fix
 		 * eay 93/06/29 */
diff --git a/sys/crypto/sha2.c b/sys/crypto/sha2.c
index 63a9ae594fc..769b73262ca 100644
--- a/sys/crypto/sha2.c
+++ b/sys/crypto/sha2.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: sha2.c,v 1.18 2015/03/14 03:38:46 jsg Exp $	*/
+/*	$OpenBSD: sha2.c,v 1.19 2021/03/12 10:22:46 jsg Exp $	*/
 
 /*
  * FILE:	sha2.c
@@ -64,7 +64,7 @@
  * Please make sure that your system defines BYTE_ORDER.  If your
  * architecture is little-endian, make sure it also defines
  * LITTLE_ENDIAN and that the two (BYTE_ORDER and LITTLE_ENDIAN) are
- * equivilent.
+ * equivalent.
  *
  * If your system does not define the above, then you can do so by
  * hand like this:
diff --git a/sys/ddb/db_elf.c b/sys/ddb/db_elf.c
index 0a7a43a41ac..2eeb1835b4f 100644
--- a/sys/ddb/db_elf.c
+++ b/sys/ddb/db_elf.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: db_elf.c,v 1.31 2020/10/15 03:14:00 deraadt Exp $	*/
+/*	$OpenBSD: db_elf.c,v 1.32 2021/03/12 10:22:46 jsg Exp $	*/
 /*	$NetBSD: db_elf.c,v 1.13 2000/07/07 21:55:18 jhawk Exp $	*/
 
 /*-
@@ -54,7 +54,7 @@ Elf_Sym		*db_elf_sym_lookup(char *);
  * symsize:	size of symbol table
  * symtab:	pointer to start of symbol table
  * esymtab:	pointer to end of string table, for checking - rounded up to
- *		    integer boundry
+ *		    integer boundary
  */
 int
 db_elf_sym_init(int symsize, void *symtab, void *esymtab, const char *name)
diff --git a/sys/lib/libsa/arp.c b/sys/lib/libsa/arp.c
index 8bef3942a9d..12a709497cc 100644
--- a/sys/lib/libsa/arp.c
+++ b/sys/lib/libsa/arp.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: arp.c,v 1.12 2014/07/13 15:31:20 mpi Exp $	*/
+/*	$OpenBSD: arp.c,v 1.13 2021/03/12 10:22:46 jsg Exp $	*/
 /*	$NetBSD: arp.c,v 1.15 1996/10/13 02:28:58 christos Exp $	*/
 
 /*
@@ -132,7 +132,7 @@ arpwhohas(struct iodesc *d, struct in_addr addr)
 	if (debug) {
 		printf("arp: response from %s\n",
 		    ether_sprintf(rbuf.eh.ether_shost));
-		printf("arp: cacheing %s --> %s\n",
+		printf("arp: caching %s --> %s\n",
 		    inet_ntoa(addr), ether_sprintf(ah->arp_sha));
 	}
 #endif
diff --git a/sys/lib/libsa/bcrypt_pbkdf.c b/sys/lib/libsa/bcrypt_pbkdf.c
index df0e34c4e46..07c1461e79e 100644
--- a/sys/lib/libsa/bcrypt_pbkdf.c
+++ b/sys/lib/libsa/bcrypt_pbkdf.c
@@ -1,4 +1,4 @@
-/* $OpenBSD: bcrypt_pbkdf.c,v 1.2 2020/07/09 19:17:19 millert Exp $ */
+/* $OpenBSD: bcrypt_pbkdf.c,v 1.3 2021/03/12 10:22:46 jsg Exp $ */
 /*
  * Copyright (c) 2013 Ted Unangst <tedu@openbsd.org>
  *
@@ -31,7 +31,7 @@
  * function with the following modifications:
  * 1. The input password and salt are preprocessed with SHA512.
  * 2. The output length is expanded to 256 bits.
- * 3. Subsequently the magic string to be encrypted is lengthened and modifed
+ * 3. Subsequently the magic string to be encrypted is lengthened and modified
  *    to "OxychromaticBlowfishSwatDynamite"
  * 4. The hash function is defined to perform 64 rounds of initial state
  *    expansion. (More rounds are performed by iterating the hash.)
diff --git a/sys/lib/libsa/sha2.c b/sys/lib/libsa/sha2.c
index 7e6feafaf7b..eacbc49d23c 100644
--- a/sys/lib/libsa/sha2.c
+++ b/sys/lib/libsa/sha2.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: sha2.c,v 1.2 2017/05/27 15:32:51 naddy Exp $	*/
+/*	$OpenBSD: sha2.c,v 1.3 2021/03/12 10:22:46 jsg Exp $	*/
 
 /*
  * FILE:	sha2.c
@@ -66,7 +66,7 @@
  * Please make sure that your system defines BYTE_ORDER.  If your
  * architecture is little-endian, make sure it also defines
  * LITTLE_ENDIAN and that the two (BYTE_ORDER and LITTLE_ENDIAN) are
- * equivilent.
+ * equivalent.
  *
  * If your system does not define the above, then you can do so by
  * hand like this:
diff --git a/sys/scsi/cd.c b/sys/scsi/cd.c
index b5185a10e91..0a4b74bac38 100644
--- a/sys/scsi/cd.c
+++ b/sys/scsi/cd.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: cd.c,v 1.262 2020/09/22 19:32:53 krw Exp $	*/
+/*	$OpenBSD: cd.c,v 1.263 2021/03/12 10:22:46 jsg Exp $	*/
 /*	$NetBSD: cd.c,v 1.100 1997/04/02 02:29:30 mycroft Exp $	*/
 
 /*
@@ -2082,7 +2082,7 @@ cd_interpret_sense(struct scsi_xfer *xs)
 	 * report "Unit Becoming Ready" when loading media and can
 	 * take a long time.  Rather than having a massive timeout for
 	 * all operations (which would cause other problems), we allow
-	 * operations to wait (but be interruptable with Ctrl-C)
+	 * operations to wait (but be interruptible with Ctrl-C)
 	 * forever as long as the drive is reporting that it is
 	 * becoming ready.  All other cases of not being ready are
 	 * handled by the default handler.
diff --git a/sys/scsi/ch.c b/sys/scsi/ch.c
index 1d8781f3dcb..672bd9560b2 100644
--- a/sys/scsi/ch.c
+++ b/sys/scsi/ch.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: ch.c,v 1.67 2020/09/22 19:32:53 krw Exp $	*/
+/*	$OpenBSD: ch.c,v 1.68 2021/03/12 10:22:46 jsg Exp $	*/
 /*	$NetBSD: ch.c,v 1.26 1997/02/21 22:06:52 thorpej Exp $	*/
 
 /*
@@ -774,7 +774,7 @@ ch_interpret_sense(struct scsi_xfer *xs)
 	 * rescan their state (i.e. when the door got opened) and can
 	 * take a long time for large units. Rather than having a
 	 * massive timeout for all operations (which would cause other
-	 * problems) we allow changers to wait (but be interruptable
+	 * problems) we allow changers to wait (but be interruptible
 	 * with Ctrl-C) forever as long as they are reporting that they
 	 * are becoming ready.  all other cases are handled as per the
 	 * default.
diff --git a/sys/scsi/mpath_sym.c b/sys/scsi/mpath_sym.c
index 11f5e224513..572b583e04a 100644
--- a/sys/scsi/mpath_sym.c
+++ b/sys/scsi/mpath_sym.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: mpath_sym.c,v 1.25 2020/06/30 18:43:37 krw Exp $ */
+/*	$OpenBSD: mpath_sym.c,v 1.26 2021/03/12 10:22:46 jsg Exp $ */
 
 /*
  * Copyright (c) 2010 David Gwynne <dlg@openbsd.org>
@@ -143,7 +143,7 @@ sym_attach(struct device *parent, struct device *self, void *aux)
 
 	printf("\n");
 
-	/* check if we're an assymetric access device */
+	/* check if we're an asymmetric access device */
 	for (i = 0; i < nitems(asym_devices); i++) {
 		s = &asym_devices[i];
 
diff --git a/sys/scsi/scsi_changer.h b/sys/scsi/scsi_changer.h
index 7ad2f1c9fef..2db9c974718 100644
--- a/sys/scsi/scsi_changer.h
+++ b/sys/scsi/scsi_changer.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: scsi_changer.h,v 1.8 2019/11/29 14:06:21 krw Exp $	*/
+/*	$OpenBSD: scsi_changer.h,v 1.9 2021/03/12 10:22:46 jsg Exp $	*/
 /*	$NetBSD: scsi_changer.h,v 1.7 1996/04/03 00:25:48 thorpej Exp $	*/
 
 /*
@@ -273,7 +273,7 @@ struct read_element_status_descriptor {
 /*
  * Device capabilities page.
  *
- * This page defines characteristics of the elemenet types in the
+ * This page defines characteristics of the element types in the
  * medium changer device.
  *
  * Note in the definitions below, the following abbreviations are
@@ -333,7 +333,7 @@ struct page_device_capabilities {
 };
 
 /*
- * Medium changer elemement address assignment page.
+ * Medium changer element address assignment page.
  *
  * Some of these fields can be a little confusing, so an explanation
  * is in order.
diff --git a/sys/scsi/scsi_disk.h b/sys/scsi/scsi_disk.h
index 31f2d1da08f..52e7f019894 100644
--- a/sys/scsi/scsi_disk.h
+++ b/sys/scsi/scsi_disk.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: scsi_disk.h,v 1.41 2020/09/01 12:17:53 krw Exp $	*/
+/*	$OpenBSD: scsi_disk.h,v 1.42 2021/03/12 10:22:46 jsg Exp $	*/
 /*	$NetBSD: scsi_disk.h,v 1.10 1996/07/05 16:19:05 christos Exp $	*/
 
 /*
@@ -113,7 +113,7 @@ struct scsi_initialization_pattern_descriptor {
 };
 
 /*
- * Defect desciptors.  These are used as the defect lists in the FORMAT UNIT
+ * Defect descriptors.  These are used as the defect lists in the FORMAT UNIT
  * and READ DEFECT DATA commands, and as the translate page of the
  * SEND DIAGNOSTIC and RECEIVE DIAGNOSTIC RESULTS commands.
  */
diff --git a/sys/scsi/st.c b/sys/scsi/st.c
index f30eea68334..2f73f79d3a3 100644
--- a/sys/scsi/st.c
+++ b/sys/scsi/st.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: st.c,v 1.185 2020/09/22 19:32:53 krw Exp $	*/
+/*	$OpenBSD: st.c,v 1.186 2021/03/12 10:22:46 jsg Exp $	*/
 /*	$NetBSD: st.c,v 1.71 1997/02/21 23:03:49 thorpej Exp $	*/
 
 /*
@@ -182,7 +182,7 @@ struct st_softc {
 	short mt_resid;		/* last (short) resid                 */
 	short mt_erreg;		/* last error (sense key) seen        */
 
-	struct scsi_link *sc_link;	/* our link to the adpter etc.        */
+	struct scsi_link *sc_link;	/* our link to the adapter etc.       */
 
 	int blkmin;		/* min blk size                       */
 	int blkmax;		/* max blk size                       */
@@ -496,7 +496,7 @@ st_mount_tape(struct st_softc *st, int flags)
 	 * Throw another dummy instruction to catch
 	 * 'Unit attention' errors. Some drives appear to give
 	 * these after doing a Load instruction.
-	 * (noteably some DAT drives)
+	 * (notably some DAT drives)
 	 */
 	/* XXX */
 	scsi_test_unit_ready(link, TEST_READY_RETRIES, SCSI_SILENT);
@@ -1865,7 +1865,7 @@ st_interpret_sense(struct scsi_xfer *xs)
 	 * drives report "Unit Becoming Ready" when loading media, etc.
 	 * and can take a long time.  Rather than having a massive timeout
 	 * for all operations (which would cause other problems) we allow
-	 * operations to wait (but be interruptable with Ctrl-C) forever
+	 * operations to wait (but be interruptible with Ctrl-C) forever
 	 * as long as the drive is reporting that it is becoming ready.
 	 * all other cases are handled as per the default.
 	 */