Replace \*(Lt \*(Le \*(Gt \*(Ge with literal < <= > >= respectively,

except for instances where \*(Le and \*(Ge are clearly understood as
mathematical symbols.  Discussed with schwarze@

12 files changed, 82 insertions, 82 deletions

diff --git a/share/man/man3/dlfcn.3 b/share/man/man3/dlfcn.3
index b8f41ba30bb..2a6e3a44e66 100644
--- a/share/man/man3/dlfcn.3
+++ b/share/man/man3/dlfcn.3
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: dlfcn.3,v 1.27 2013/11/02 09:41:58 espie Exp $
+.\"	$OpenBSD: dlfcn.3,v 1.28 2015/02/16 16:38:53 naddy Exp $
 .\"	$NetBSD: dlfcn.3,v 1.3 1996/01/09 19:43:34 pk Exp $
 .\"
 .\" Copyright (c) 1995 Paul Kranenburg
@@ -29,7 +29,7 @@
 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd $Mdocdate: November 2 2013 $
+.Dd $Mdocdate: February 16 2015 $
 .Dt DLFCN 3
 .Os
 .Sh NAME
@@ -80,7 +80,7 @@ shared library searches.
 .Pp
 Shared libraries take the following form:
 .Pp
-.Dl lib\*(Ltname\*(Gt.so[.xx[.yy]]
+.Dl lib<name>.so[.xx[.yy]]
 .Pp
 When a shared library is specified without a version or with a partial version,
 the same library search rules apply that are used for
diff --git a/share/man/man4/ddb.4 b/share/man/man4/ddb.4
index 00250fecb43..1dd1163d27b 100644
--- a/share/man/man4/ddb.4
+++ b/share/man/man4/ddb.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: ddb.4,v 1.76 2014/03/18 22:36:31 miod Exp $
+.\"	$OpenBSD: ddb.4,v 1.77 2015/02/16 16:38:54 naddy Exp $
 .\"	$NetBSD: ddb.4,v 1.5 1994/11/30 16:22:09 jtc Exp $
 .\"
 .\" Mach Operating System
@@ -25,7 +25,7 @@
 .\" any improvements or extensions that they make and grant Carnegie Mellon
 .\" the rights to redistribute these changes.
 .\"
-.Dd $Mdocdate: March 18 2014 $
+.Dd $Mdocdate: February 16 2015 $
 .Dt DDB 4
 .Os
 .Sh NAME
@@ -70,7 +70,7 @@ is set to 2.
 .Nm
 prompts for commands on the console with:
 .Pp
-.Dl ddb\*(Gt
+.Dl ddb>
 .Pp
 The general syntax of a
 .Nm
@@ -192,7 +192,7 @@ exchange the two characters to the left of the cursor
 .El
 .Sh COMMANDS
 The following commands may be typed at the
-.Ql ddb\*(Gt
+.Ql ddb>
 prompt.
 Some commands consist of more than one word, and if only the first word
 or words are entered, the possible alternatives to complete the command
diff --git a/share/man/man4/enc.4 b/share/man/man4/enc.4
index 231585e1553..3c3709b9ff1 100644
--- a/share/man/man4/enc.4
+++ b/share/man/man4/enc.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: enc.4,v 1.28 2010/06/29 21:28:37 reyk Exp $
+.\"	$OpenBSD: enc.4,v 1.29 2015/02/16 16:38:54 naddy Exp $
 .\"
 .\" Copyright (c) 2006 Jason McIntyre <jmc@openbsd.org>
 .\"
@@ -14,7 +14,7 @@
 .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 .\"
-.Dd $Mdocdate: June 29 2010 $
+.Dd $Mdocdate: February 16 2015 $
 .Dt ENC 4
 .Os
 .Sh NAME
@@ -111,11 +111,11 @@ For example:
 tcpdump: WARNING: enc0: no IPv4 address assigned
 tcpdump: listening on enc0, link-type ENC
 15:05:08.934708 (authentic,confidential): SPI 0x6bcac587: \e
-	172.25.0.45 \*(Gt 1.2.3.4: 10.9.9.28.7001 \*(Gt 10.0.0.33.7000: \e
+	172.25.0.45 > 1.2.3.4: 10.9.9.28.7001 > 10.0.0.33.7000: \e
 	[udp sum ok] udp 52 (ttl 64, id 5672, len 80) \e
 	(ttl 64, id 30009, len 100, bad cksum 0!)
 15:05:09.063517 (authentic,confidential): SPI 0x4b70c05a: \e
-	1.2.3.4 \*(Gt 172.25.0.45: 10.0.0.33.7000 \*(Gt 10.9.9.28.7001: \e
+	1.2.3.4 > 172.25.0.45: 10.0.0.33.7000 > 10.9.9.28.7001: \e
 	[udp sum ok] udp 156 (ttl 63, id 14880, len 184) \e
 	(ttl 51, id 19689, len 204)
 .Ed
@@ -130,7 +130,7 @@ Negotiations can be watched on the physical interface too:
 # tcpdump -envps 1500 -i wi0 port 500 or port 4500
 tcpdump: listening on wi0, link-type EN10MB
 15:15:58.188747 0:2:6f:3a:3f:3e 0:10:f3:3:bd:8a 0800 226: \e
-    172.25.0.45.500 \*(Gt 1.2.3.4.500: [udp sum ok] \e
+    172.25.0.45.500 > 1.2.3.4.500: [udp sum ok] \e
 [...]
 	attribute ENCRYPTION_ALGORITHM = AES_CBC
 	attribute HASH_ALGORITHM = SHA
@@ -141,7 +141,7 @@ tcpdump: listening on wi0, link-type EN10MB
 	attribute KEY_LENGTH = 128
 [...]
 15:15:59.080058 0:10:f3:3:bd:8a 0:2:6f:3a:3f:3e 0800 226: \e
-    1.2.3.4.500 \*(Gt 172.25.0.45.500: [udp sum ok] \e
+    1.2.3.4.500 > 172.25.0.45.500: [udp sum ok] \e
 [...]
 	attribute ENCRYPTION_ALGORITHM = AES_CBC
 	attribute HASH_ALGORITHM = SHA
diff --git a/share/man/man4/ipsec.4 b/share/man/man4/ipsec.4
index 1f73fa9be53..1a71ae3a1ec 100644
--- a/share/man/man4/ipsec.4
+++ b/share/man/man4/ipsec.4
@@ -1,4 +1,4 @@
-.\" $OpenBSD: ipsec.4,v 1.82 2015/01/29 07:48:51 jmc Exp $
+.\" $OpenBSD: ipsec.4,v 1.83 2015/02/16 16:38:54 naddy Exp $
 .\"
 .\" Copyright 1997 Niels Provos <provos@physnet.uni-hamburg.de>
 .\" All rights reserved.
@@ -30,7 +30,7 @@
 .\"
 .\" Manual page, using -mandoc macros
 .\"
-.Dd $Mdocdate: January 29 2015 $
+.Dd $Mdocdate: February 16 2015 $
 .Dt IPSEC 4
 .Os
 .Sh NAME
@@ -216,7 +216,7 @@ where two firewalls use IPsec
 to secure the traffic of all the hosts behind them.
 For example:
 .Bd -literal -offset indent
-Net A \*(Lt----\*(Gt Firewall 1 \*(Lt--- Internet ---\*(Gt Firewall 2 \*(Lt----\*(Gt Net B
+Net A <----> Firewall 1 <--- Internet ---> Firewall 2 <----> Net B
 .Ed
 .Pp
 Firewall 1 and Firewall 2 can protect all communications between Net A
@@ -233,8 +233,8 @@ interfaces, but special care should be taken because of the interactions
 between NAT and the IPsec flow matching, especially on the packet output path.
 Inside the TCP/IP stack, packets go through the following stages:
 .Bd -literal -offset indent
-UL/R -\*(Gt [X] -\*(Gt PF/NAT(enc0) -\*(Gt IPsec -\*(Gt PF/NAT(IF) -\*(Gt IF
-UL/R \*(Lt-------- PF/NAT(enc0) \*(Lt- IPsec \*(Lt- PF/NAT(IF) \*(Lt- IF
+UL/R -> [X] -> PF/NAT(enc0) -> IPsec -> PF/NAT(IF) -> IF
+UL/R <-------- PF/NAT(enc0) <- IPsec <- PF/NAT(IF) <- IF
 .Ed
 .Pp
 With IF being the real interface and UL/R the Upper Layer or Routing code.
diff --git a/share/man/man4/multicast.4 b/share/man/man4/multicast.4
index 1ec3ce0834c..0f7e7112974 100644
--- a/share/man/man4/multicast.4
+++ b/share/man/man4/multicast.4
@@ -24,10 +24,10 @@
 .\" DEALINGS IN THE SOFTWARE.
 .\"
 .\" $FreeBSD: src/share/man/man4/multicast.4,v 1.4 2004/07/09 09:22:36 ru Exp $
-.\" $OpenBSD: multicast.4,v 1.9 2014/01/21 03:15:46 schwarze Exp $
+.\" $OpenBSD: multicast.4,v 1.10 2015/02/16 16:38:54 naddy Exp $
 .\" $NetBSD: multicast.4,v 1.3 2004/09/12 13:12:26 wiz Exp $
 .\"
-.Dd $Mdocdate: January 21 2014 $
+.Dd $Mdocdate: February 16 2015 $
 .Dt MULTICAST 4
 .Os
 .\"
@@ -303,7 +303,7 @@ memset(&mc, 0, sizeof(mc));
 memcpy(&mc.mfcc_origin, &source_addr, sizeof(mc.mfcc_origin));
 memcpy(&mc.mfcc_mcastgrp, &group_addr, sizeof(mc.mfcc_mcastgrp));
 mc.mfcc_parent = iif_index;
-for (i = 0; i \*(Lt maxvifs; i++)
+for (i = 0; i < maxvifs; i++)
     mc.mfcc_ttls[i] = oifs_ttl[i];
 setsockopt(mrouter_s4, IPPROTO_IP, MRT_ADD_MFC,
            (void *)&mc, sizeof(mc));
@@ -315,8 +315,8 @@ memset(&mc, 0, sizeof(mc));
 memcpy(&mc.mf6cc_origin, &source_addr, sizeof(mc.mf6cc_origin));
 memcpy(&mc.mf6cc_mcastgrp, &group_addr, sizeof(mf6cc_mcastgrp));
 mc.mf6cc_parent = iif_index;
-for (i = 0; i \*(Lt maxvifs; i++)
-    if (oifs_ttl[i] \*(Gt 0)
+for (i = 0; i < maxvifs; i++)
+    if (oifs_ttl[i] > 0)
         IF_SET(i, &mc.mf6cc_ifset);
 setsockopt(mrouter_s4, IPPROTO_IPV6, MRT6_ADD_MFC,
            (void *)&mc, sizeof(mc));
@@ -513,15 +513,15 @@ should be called right after
 .Pp
 Currently, the following set of new features is defined:
 .Bd -literal
-#define	MRT_MFC_FLAGS_DISABLE_WRONGVIF (1 \*(Lt\*(Lt 0)/*disable WRONGVIF signals*/
-#define	MRT_MFC_FLAGS_BORDER_VIF   (1 \*(Lt\*(Lt 1)  /* border vif              */
-#define MRT_MFC_RP                 (1 \*(Lt\*(Lt 8)  /* enable RP address	*/
-#define MRT_MFC_BW_UPCALL          (1 \*(Lt\*(Lt 9)  /* enable bw upcalls	*/
+#define	MRT_MFC_FLAGS_DISABLE_WRONGVIF (1 << 0)/*disable WRONGVIF signals*/
+#define	MRT_MFC_FLAGS_BORDER_VIF   (1 << 1)  /* border vif              */
+#define MRT_MFC_RP                 (1 << 8)  /* enable RP address	*/
+#define MRT_MFC_BW_UPCALL          (1 << 9)  /* enable bw upcalls	*/
 .Ed
 .\" .Pp
 .\" In the future there might be:
 .\" .Bd -literal
-.\" #define MRT_MFC_GROUP_SPECIFIC     (1 \*(Lt\*(Lt 10) /* allow (*,G) MFC entries */
+.\" #define MRT_MFC_GROUP_SPECIFIC     (1 << 10) /* allow (*,G) MFC entries */
 .\" .Ed
 .\" .Pp
 .\" to allow (*,G) MFC entries (i.e., group-specific entries) in the kernel.
@@ -572,8 +572,8 @@ field is used to set various flags per
 interface per (S,G) entry.
 Currently, the defined flags are:
 .Bd -literal
-#define	MRT_MFC_FLAGS_DISABLE_WRONGVIF (1 \*(Lt\*(Lt 0)/*disable WRONGVIF signals*/
-#define	MRT_MFC_FLAGS_BORDER_VIF       (1 \*(Lt\*(Lt 1) /* border vif          */
+#define	MRT_MFC_FLAGS_DISABLE_WRONGVIF (1 << 0)/*disable WRONGVIF signals*/
+#define	MRT_MFC_FLAGS_BORDER_VIF       (1 << 1) /* border vif          */
 .Ed
 .Pp
 The
@@ -699,14 +699,14 @@ There can be
 more than one filter per (S,G).
 .It
 Instead of supporting all possible comparison operations
-(i.e., \*(Lt \*(Lt= == != \*(Gt \*(Gt= ), there is support only for the
-\*(Lt= and \*(Gt= operations,
+(i.e., < <= == != > >= ), there is support only for the
+<= and >= operations,
 because this makes the kernel-level implementation simpler,
 and because practically we need only those two.
 Furthermore, the missing operations can be simulated by secondary
-user-level filtering of those \*(Lt= and \*(Gt= filters.
+user-level filtering of those <= and >= filters.
 For example, to simulate !=, then we need to install filter
-.Dq bw \*(Lt= 0xffffffff ,
+.Dq bw <= 0xffffffff ,
 and after an
 upcall is received, we need to check whether
 .Dq measured_bw != expected_bw .
@@ -746,14 +746,14 @@ the following:
  *
  * Measurement works as follows:
  *
- * For \*(Gt= measurements:
+ * For >= measurements:
  * The first packet marks the start of a measurement interval.
  * During an interval we count packets and bytes, and when we
  * pass the threshold we deliver an upcall and we are done.
  * The first packet after the end of the interval resets the
  * count and restarts the measurement.
  *
- * For \*(Lt= measurement:
+ * For <= measurement:
  * We start a timer to fire at the end of the interval, and
  * then for each incoming packet we count packets and bytes.
  * When the timer fires, we compare the value with the threshold,
@@ -771,11 +771,11 @@ struct bw_upcall {
         struct in_addr  bu_src;         /* source address            */
         struct in_addr  bu_dst;         /* destination address       */
         uint32_t        bu_flags;       /* misc flags (see below)    */
-#define BW_UPCALL_UNIT_PACKETS (1 \*(Lt\*(Lt 0) /* threshold (in packets)    */
-#define BW_UPCALL_UNIT_BYTES   (1 \*(Lt\*(Lt 1) /* threshold (in bytes)      */
-#define BW_UPCALL_GEQ          (1 \*(Lt\*(Lt 2) /* upcall if bw \*(Gt= threshold */
-#define BW_UPCALL_LEQ          (1 \*(Lt\*(Lt 3) /* upcall if bw \*(Lt= threshold */
-#define BW_UPCALL_DELETE_ALL   (1 \*(Lt\*(Lt 4) /* delete all upcalls for s,d*/
+#define BW_UPCALL_UNIT_PACKETS (1 << 0) /* threshold (in packets)    */
+#define BW_UPCALL_UNIT_BYTES   (1 << 1) /* threshold (in bytes)      */
+#define BW_UPCALL_GEQ          (1 << 2) /* upcall if bw >= threshold */
+#define BW_UPCALL_LEQ          (1 << 3) /* upcall if bw <= threshold */
+#define BW_UPCALL_DELETE_ALL   (1 << 4) /* delete all upcalls for s,d*/
         struct bw_data  bu_threshold;   /* the bw threshold          */
         struct bw_data  bu_measured;    /* the measured bw           */
 };
@@ -802,19 +802,19 @@ argument,
 and that filter will trigger an upcall according to the following
 pseudo-algorithm:
 .Bd -literal
- if (bw_upcall_oper IS "\*(Gt=") {
+ if (bw_upcall_oper IS ">=") {
     if (((bw_upcall_unit & PACKETS == PACKETS) &&
-         (measured_packets \*(Gt= threshold_packets)) ||
+         (measured_packets >= threshold_packets)) ||
         ((bw_upcall_unit & BYTES == BYTES) &&
-         (measured_bytes \*(Gt= threshold_bytes)))
-       SEND_UPCALL("measured bandwidth is \*(Gt= threshold");
+         (measured_bytes >= threshold_bytes)))
+       SEND_UPCALL("measured bandwidth is >= threshold");
   }
-  if (bw_upcall_oper IS "\*(Lt=" && measured_interval \*(Gt= threshold_interval) {
+  if (bw_upcall_oper IS "<=" && measured_interval >= threshold_interval) {
     if (((bw_upcall_unit & PACKETS == PACKETS) &&
-         (measured_packets \*(Lt= threshold_packets)) ||
+         (measured_packets <= threshold_packets)) ||
         ((bw_upcall_unit & BYTES == BYTES) &&
-         (measured_bytes \*(Lt= threshold_bytes)))
-       SEND_UPCALL("measured bandwidth is \*(Lt= threshold");
+         (measured_bytes <= threshold_bytes)))
+       SEND_UPCALL("measured bandwidth is <= threshold");
   }
 .Ed
 .Pp
@@ -823,18 +823,18 @@ In the same
 the unit can be specified in both BYTES and PACKETS.
 However, the GEQ and LEQ flags are mutually exclusive.
 .Pp
-Basically, an upcall is delivered if the measured bandwidth is \*(Gt= or
-\*(Lt= the threshold bandwidth (within the specified measurement
+Basically, an upcall is delivered if the measured bandwidth is >= or
+<= the threshold bandwidth (within the specified measurement
 interval).
 For practical reasons, the smallest value for the measurement
 interval is 3 seconds.
 If smaller values are allowed, then the bandwidth
 estimation may be less accurate, or the potentially very high frequency
 of the generated upcalls may introduce too much overhead.
-For the \*(Gt= operation, the answer may be known before the end of
+For the >= operation, the answer may be known before the end of
 .Va threshold_interval ,
 therefore the upcall may be delivered earlier.
-For the \*(Lt= operation however, we must wait
+For the <= operation however, we must wait
 until the threshold interval has expired to know the answer.
 .Sh EXAMPLES
 .Bd -literal -offset indent
@@ -910,10 +910,10 @@ the particular intervals are measured, the user should be careful how
 is used.
 For example, if the
 filter is installed to trigger an upcall if the number of packets
-is \*(Gt= 1, then
+is >= 1, then
 .Va bu_measured
 may have a value of zero in the upcalls after the
-first one, because the measured interval for \*(Gt= filters is
+first one, because the measured interval for >= filters is
 .Dq clocked
 by the forwarded packets.
 Hence, this upcall mechanism should not be used for measuring
@@ -930,7 +930,7 @@ Note that the upcalls for a filter are delivered until the specific
 filter is deleted, but no more frequently than once per
 .Va bu_threshold.b_time .
 For example, if the filter is specified to
-deliver a signal if bw \*(Gt= 1 packet, the first packet will trigger a
+deliver a signal if bw >= 1 packet, the first packet will trigger a
 signal, but the next upcall will be triggered no earlier than
 .Va bu_threshold.b_time
 after the previous upcall.
diff --git a/share/man/man4/pppoe.4 b/share/man/man4/pppoe.4
index 387de882dd4..29158d4516f 100644
--- a/share/man/man4/pppoe.4
+++ b/share/man/man4/pppoe.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: pppoe.4,v 1.27 2014/10/08 12:57:51 sthen Exp $
+.\"	$OpenBSD: pppoe.4,v 1.28 2015/02/16 16:38:54 naddy Exp $
 .\"	$NetBSD: pppoe.4,v 1.26 2003/10/02 07:06:36 wiz Exp $
 .\"
 .\" Copyright (c) 2002 The NetBSD Foundation, Inc.
@@ -28,7 +28,7 @@
 .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 .\" POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd $Mdocdate: October 8 2014 $
+.Dd $Mdocdate: February 16 2015 $
 .Dt PPPOE 4
 .Os
 .Sh NAME
@@ -108,7 +108,7 @@ dest 0.0.0.1
 The physical interface must also be marked
 .Ql up :
 .Bd -literal -offset indent
-# echo "up" \*(Gt /etc/hostname.em0
+# echo "up" > /etc/hostname.em0
 .Ed
 .Pp
 Since this is a PPP interface, the addresses assigned to the interface
@@ -216,7 +216,7 @@ dest 0.0.0.1
 .Pp
 The physical interface must also be configured like so:
 .Bd -literal -offset indent
-# echo "up mtu 1508" \*(Gt /etc/hostname.em0
+# echo "up mtu 1508" > /etc/hostname.em0
 .Ed
 .Pp
 With this, the previously mentioned MSS clamping rules in
diff --git a/share/man/man4/softraid.4 b/share/man/man4/softraid.4
index 85f5f07a98f..9979102009f 100644
--- a/share/man/man4/softraid.4
+++ b/share/man/man4/softraid.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: softraid.4,v 1.38 2014/11/27 13:15:54 stsp Exp $
+.\"	$OpenBSD: softraid.4,v 1.39 2015/02/16 16:38:54 naddy Exp $
 .\"
 .\" Copyright (c) 2007 Todd T. Fries   <todd@OpenBSD.org>
 .\" Copyright (c) 2007 Marco Peereboom <marco@OpenBSD.org>
@@ -15,7 +15,7 @@
 .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 .\"
-.Dd $Mdocdate: November 27 2014 $
+.Dd $Mdocdate: February 16 2015 $
 .Dt SOFTRAID 4
 .Os
 .Sh NAME
@@ -141,7 +141,7 @@ Assemble the RAID volume:
 The console will show what device was added to the system:
 .Bd -literal -offset indent
 scsibus0 at softraid0: 1 targets
-sd0 at scsibus0 targ 0 lun 0: \*(LtOPENBSD, SR RAID 1, 001\*(Gt SCSI2
+sd0 at scsibus0 targ 0 lun 0: <OPENBSD, SR RAID 1, 001> SCSI2
 sd0: 1MB, 0 cyl, 255 head, 63 sec, 512 bytes/sec, 3714 sec total
 .Ed
 .Pp
diff --git a/share/man/man4/ugen.4 b/share/man/man4/ugen.4
index b83100ad21f..d8beefd5719 100644
--- a/share/man/man4/ugen.4
+++ b/share/man/man4/ugen.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: ugen.4,v 1.15 2008/06/26 05:42:07 ray Exp $
+.\"	$OpenBSD: ugen.4,v 1.16 2015/02/16 16:38:54 naddy Exp $
 .\"	$NetBSD: ugen.4,v 1.7 1999/07/30 01:32:05 augustss Exp $
 .\"
 .\" Copyright (c) 1999 The NetBSD Foundation, Inc.
@@ -28,7 +28,7 @@
 .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 .\" POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd $Mdocdate: June 26 2008 $
+.Dd $Mdocdate: February 16 2015 $
 .Dt UGEN 4
 .Os
 .Sh NAME
@@ -270,11 +270,11 @@ All endpoints (except the control endpoint) for the current configuration
 can be found by iterating the
 .Fa interface_index
 from 0 to
-.Fa config_desc-\*(GtbNumInterface-1
+.Fa config_desc->bNumInterface-1
 and for each of these iterating the
 .Fa endpoint_index
 from 0 to
-.Fa interface_desc-\*(GtbNumEndpoints-1 .
+.Fa interface_desc->bNumEndpoints-1 .
 The
 .Fa config_index
 should be set to
diff --git a/share/man/man8/diskless.8 b/share/man/man8/diskless.8
index e1cae83250c..f4d3f70ddf8 100644
--- a/share/man/man8/diskless.8
+++ b/share/man/man8/diskless.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: diskless.8,v 1.63 2014/03/18 22:36:31 miod Exp $
+.\"	$OpenBSD: diskless.8,v 1.64 2015/02/16 16:38:54 naddy Exp $
 .\"	$NetBSD: diskless.8,v 1.7.4.1 1996/05/30 18:58:10 cgd Exp $
 .\"
 .\"
@@ -27,7 +27,7 @@
 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd $Mdocdate: March 18 2014 $
+.Dd $Mdocdate: February 16 2015 $
 .Dt DISKLESS 8
 .Os
 .Sh NAME
@@ -315,8 +315,8 @@ Copy and customize at least the following files in
 # cd /export/myclient/root/etc
 # cp /etc/fstab fstab
 # cp /etc/hosts hosts
-# echo myclient \*(Gt myname
-# echo inet 192.197.96.12 \*(Gt hostname.le0
+# echo myclient > myname
+# echo inet 192.197.96.12 > hostname.le0
 .Ed
 .Pp
 Note that "le0" above should be replaced with the name of
diff --git a/share/man/man9/mbuf.9 b/share/man/man9/mbuf.9
index 30dda56d418..c4fc3243b66 100644
--- a/share/man/man9/mbuf.9
+++ b/share/man/man9/mbuf.9
@@ -1,4 +1,4 @@
-.\"     $OpenBSD: mbuf.9,v 1.83 2015/02/10 04:08:00 lteo Exp $
+.\"     $OpenBSD: mbuf.9,v 1.84 2015/02/16 16:38:54 naddy Exp $
 .\"
 .\" Copyright (c) 2001 Jean-Jacques Bernard-Gundol <jjbg@openbsd.org>
 .\" All rights reserved.
@@ -25,7 +25,7 @@
 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd $Mdocdate: February 10 2015 $
+.Dd $Mdocdate: February 16 2015 $
 .Dt MBUF 9
 .Os
 .Sh NAME
@@ -174,7 +174,7 @@
 #define MCLBYTES        (1 << MCLSHIFT)
 #define MCLOFSET        (MCLBYTES - 1)
 
-#define mtod(m,t)       ((t)((m)-\*(Gtm_data))
+#define mtod(m,t)       ((t)((m)->m_data))
 
 struct m_hdr {
         struct  mbuf *mh_next;
diff --git a/share/man/man9/rssadapt.9 b/share/man/man9/rssadapt.9
index 0cd583cd04a..db928597cda 100644
--- a/share/man/man9/rssadapt.9
+++ b/share/man/man9/rssadapt.9
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: rssadapt.9,v 1.7 2013/08/12 14:19:53 jmc Exp $
+.\"	$OpenBSD: rssadapt.9,v 1.8 2015/02/16 16:38:54 naddy Exp $
 .\"     $NetBSD: rssadapt.9,v 1.4 2004/12/08 18:35:56 peter Exp $
 .\"
 .\" Copyright (c) 2004 David Young.  All rights reserved.
@@ -31,7 +31,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 .\" POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd $Mdocdate: August 12 2013 $
+.Dd $Mdocdate: February 16 2015 $
 .Dt RSSADAPT 9
 .Os
 .Sh NAME
@@ -105,7 +105,7 @@ state object belonging to the node which is the packet destination.
 However, if the destination is a broadcast/multicast address, then
 .Fa ra
 belongs to the BSS node,
-.Va ic-\*(Gtic_bss .
+.Va ic->ic_bss .
 .It Fa rs
 A list of eligible data rates for the node; for example, the
 rates negotiated when the node associated with the network.
@@ -299,7 +299,7 @@ is the exponential-average RSS at the time the packet was
 transmitted.
 .Fa id_rateidx
 is an index into the destination neighbor's rate-set,
-.Fa id_node-\*(Gtni_rates ,
+.Fa id_node->ni_rates ,
 indicating the transmit data rate for the packet.
 .Pp
 .Vt ieee80211_rssadapt
diff --git a/share/man/man9/socreate.9 b/share/man/man9/socreate.9
index 8ae52d2e2a1..7a3604f639d 100644
--- a/share/man/man9/socreate.9
+++ b/share/man/man9/socreate.9
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: socreate.9,v 1.2 2009/01/29 17:57:18 jmc Exp $
+.\"	$OpenBSD: socreate.9,v 1.3 2015/02/16 16:38:54 naddy Exp $
 .\"
 .\" Copyright (c) 2006 Robert N. M. Watson
 .\" All rights reserved.
@@ -26,7 +26,7 @@
 .\"
 .\" $FreeBSD: src/share/man/man9/socket.9,v 1.2 2006/12/16 10:32:10 rwatson Exp $
 .\"
-.Dd $Mdocdate: January 29 2009 $
+.Dd $Mdocdate: February 16 2015 $
 .Dt SOCREATE 9
 .Os
 .Sh NAME
@@ -135,11 +135,11 @@ Unlike the user system call,
 returns immediately; the caller may
 .Xr tsleep 9
 on
-.Fa so-\*(Gtso_timeo
+.Fa so->so_timeo
 and wait for the
 .Dv SS_ISCONNECTING
 flag to clear or
-.Fa so-\*(Gtso_error
+.Fa so->so_error
 to become non-zero.
 If
 .Fn soconnect