use the right capitalization for `QLogic'

ok jsing@

17 files changed, 63 insertions, 63 deletions

diff --git a/share/man/man4/isp.4 b/share/man/man4/isp.4
index 42d2d8a4ba9..6d620dd771b 100644
--- a/share/man/man4/isp.4
+++ b/share/man/man4/isp.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: isp.4,v 1.22 2007/05/31 19:19:50 jmc Exp $
+.\"	$OpenBSD: isp.4,v 1.23 2008/01/21 20:00:32 sobrado Exp $
 .\"
 .\" Copyright (c) 1998, 1999
 .\" 	Matthew Jacob, for NASA/Ames Research Center
@@ -26,12 +26,12 @@
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
 .\"
-.Dd $Mdocdate: May 31 2007 $
+.Dd $Mdocdate: January 21 2008 $
 .Dt ISP 4
 .Os
 .Sh NAME
 .Nm isp
-.Nd Qlogic based SCSI or Fibre Channel SCSI interface
+.Nd QLogic based SCSI or Fibre Channel SCSI interface
 .Sh SYNOPSIS
 .Cd "isp* at pci?     " Pq PCI
 .Cd "isp* at sbus?    " Pq SBus
@@ -42,7 +42,7 @@ This driver provides access to a
 .Tn SCSI
 bus or a Fibre Channel
 connected to
-.Tn Qlogic
+.Tn QLogic
 ISP1000 (SBus), ISP1020 (PCI), ISP1040 (PCI), ISP1080 (PCI), ISP12160 (PCI)
 .Tn SCSI
 host adapters or ISP2100 (PCI), ISP2200 (PCI) Fibre Channel
diff --git a/share/man/man4/pci.4 b/share/man/man4/pci.4
index fa6944d5a81..708ee182f3a 100644
--- a/share/man/man4/pci.4
+++ b/share/man/man4/pci.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: pci.4,v 1.245 2008/01/09 06:17:22 jmc Exp $
+.\"	$OpenBSD: pci.4,v 1.246 2008/01/21 20:00:32 sobrado Exp $
 .\"	$NetBSD: pci.4,v 1.29 2000/04/01 00:32:23 tsarna Exp $
 .\"
 .\" Copyright (c) 2000 Theo de Raadt.  All rights reserved.
@@ -31,7 +31,7 @@
 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd $Mdocdate: January 9 2008 $
+.Dd $Mdocdate: January 21 2008 $
 .Dt PCI 4
 .Os
 .Sh NAME
@@ -105,7 +105,7 @@ Buslogic SCSI interface
 .It Xr iha 4
 Initio INIC-940/950 based PCI SCSI interface
 .It Xr isp 4
-Qlogic based SCSI or Fibre Channel SCSI interface
+QLogic based SCSI or Fibre Channel SCSI interface
 .It Xr mpi 4
 LSI Logic Fusion-MPT Message Passing Interface
 .It Xr pcscp 4
diff --git a/share/man/man4/sbus.4 b/share/man/man4/sbus.4
index 9178da132f3..72527e032a2 100644
--- a/share/man/man4/sbus.4
+++ b/share/man/man4/sbus.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: sbus.4,v 1.41 2007/05/31 19:19:51 jmc Exp $
+.\"	$OpenBSD: sbus.4,v 1.42 2008/01/21 20:00:32 sobrado Exp $
 .\"	$NetBSD: sbus.4,v 1.5 2002/01/21 17:54:10 wiz Exp $
 .\"
 .\" Copyright (c) 2001 The NetBSD Foundation, Inc.
@@ -35,7 +35,7 @@
 .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 .\" POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd $Mdocdate: May 31 2007 $
+.Dd $Mdocdate: January 21 2008 $
 .Dt SBUS 4
 .Os
 .Sh NAME
@@ -75,7 +75,7 @@ SPARC CS4231 audio device
 .It Xr esp 4
 ESP NCR 53c94 on-board or SBus SCSI interface
 .It Xr isp 4
-Qlogic based SCSI or Fibre Channel SCSI interface
+QLogic based SCSI or Fibre Channel SCSI interface
 .El
 .Ss Network interfaces
 .Bl -tag -width 13n -offset ind -compact
diff --git a/sys/conf/files b/sys/conf/files
index 4827ed740c8..6cfc49eb7d8 100644
--- a/sys/conf/files
+++ b/sys/conf/files
@@ -1,4 +1,4 @@
-#	$OpenBSD: files,v 1.423 2008/01/19 23:53:53 marco Exp $
+#	$OpenBSD: files,v 1.424 2008/01/21 20:00:32 sobrado Exp $
 #	$NetBSD: files,v 1.87 1996/05/19 17:17:50 jonathan Exp $
 
 #	@(#)files.newconf	7.5 (Berkeley) 5/10/93
@@ -179,7 +179,7 @@ file	dev/ic/ami.c			ami
 device	mfi: scsi
 file	dev/ic/mfi.c			mfi
 
-# Qlogic ISP 10x0 SCSI Controllers
+# QLogic ISP 10x0 SCSI Controllers
 device	isp: scsi
 file	dev/ic/isp.c			isp
 file	dev/ic/isp_openbsd.c		isp
diff --git a/sys/dev/ic/isp.c b/sys/dev/ic/isp.c
index 15de82d85dc..bc1f4bdbb44 100644
--- a/sys/dev/ic/isp.c
+++ b/sys/dev/ic/isp.c
@@ -1,7 +1,7 @@
-/* 	$OpenBSD: isp.c,v 1.40 2007/10/16 23:41:42 fgsch Exp $ */
+/* 	$OpenBSD: isp.c,v 1.41 2008/01/21 20:00:33 sobrado Exp $ */
 /*
  * Machine and OS Independent (well, as best as possible)
- * code for the Qlogic ISP SCSI adapters.
+ * code for the QLogic ISP SCSI adapters.
  *
  * Copyright (c) 1997, 1998, 1999, 2000, 2001 by Matthew Jacob
  * Feral Software
@@ -1879,7 +1879,7 @@ isp_pdb_sync(struct ispsoftc *isp)
 		 * If we'd been logged in- see if we still are and we haven't
 		 * changed. If so, no need to log ourselves out, etc..
 		 *
-		 * Unfortunately, our charming Qlogic f/w has decided to
+		 * Unfortunately, our charming QLogic f/w has decided to
 		 * return a valid port database entry for a fabric device
 		 * that has, in fact, gone away. And it hangs trying to
 		 * log it out.
@@ -3218,7 +3218,7 @@ isp_start(XS_T *xs)
 
 		/*
 		 * Fibre Channel always requires some kind of tag.
-		 * The Qlogic drivers seem be happy not to use a tag,
+		 * The QLogic drivers seem be happy not to use a tag,
 		 * but this breaks for some devices (IBM drives).
 		 */
 		if (XS_TAG_P(xs)) {
@@ -3267,7 +3267,7 @@ isp_start(XS_T *xs)
 
 	/*
 	 * Set up DMA and/or do any bus swizzling of the request entry
-	 * so that the Qlogic F/W understands what is being asked of it.
+	 * so that the QLogic F/W understands what is being asked of it.
 	 */
 	i = ISP_DMASETUP(isp, xs, reqp, &nxti, optr);
 	if (i != CMD_QUEUED) {
@@ -6315,7 +6315,7 @@ isp_parse_nvram_2100(struct ispsoftc *isp, u_int8_t *nvram_data)
 	 * I can find. However, we should account for this being set
 	 * at some point in the future.
 	 *
-	 * Qlogic WWNs have an NAA of 2, but usually nothing shows up in
+	 * QLogic WWNs have an NAA of 2, but usually nothing shows up in
 	 * bits 48..60. In the case of the 2202, it appears that they do
 	 * use bit 48 to distinguish between the two instances on the card.
 	 * The 2204, which I've never seen, *probably* extends this method.
diff --git a/sys/dev/ic/isp_inline.h b/sys/dev/ic/isp_inline.h
index 5c8ead1aa71..5dcd5c35a28 100644
--- a/sys/dev/ic/isp_inline.h
+++ b/sys/dev/ic/isp_inline.h
@@ -1,6 +1,6 @@
-/*	$OpenBSD: isp_inline.h,v 1.13 2004/08/02 19:55:45 art Exp $ */
+/*	$OpenBSD: isp_inline.h,v 1.14 2008/01/21 20:00:33 sobrado Exp $ */
 /*
- * Qlogic Host Adapter Inline Functions
+ * QLogic Host Adapter Inline Functions
  *
  * Copyright (c) 1999, 2000, 2001 by Matthew Jacob
  * Feral Software
diff --git a/sys/dev/ic/isp_openbsd.c b/sys/dev/ic/isp_openbsd.c
index c89484d3993..02369781da5 100644
--- a/sys/dev/ic/isp_openbsd.c
+++ b/sys/dev/ic/isp_openbsd.c
@@ -1,6 +1,6 @@
-/* 	$OpenBSD: isp_openbsd.c,v 1.30 2007/04/10 17:47:55 miod Exp $ */
+/* 	$OpenBSD: isp_openbsd.c,v 1.31 2008/01/21 20:00:33 sobrado Exp $ */
 /*
- * Platform (OpenBSD) dependent common attachment code for Qlogic adapters.
+ * Platform (OpenBSD) dependent common attachment code for QLogic adapters.
  *
  * Copyright (c) 1999, 2000, 2001 by Matthew Jacob
  * All rights reserved.
diff --git a/sys/dev/ic/isp_openbsd.h b/sys/dev/ic/isp_openbsd.h
index edcb0781130..f08f1a95968 100644
--- a/sys/dev/ic/isp_openbsd.h
+++ b/sys/dev/ic/isp_openbsd.h
@@ -1,6 +1,6 @@
-/*      $OpenBSD: isp_openbsd.h,v 1.26 2004/08/02 19:55:45 art Exp $ */
+/*      $OpenBSD: isp_openbsd.h,v 1.27 2008/01/21 20:00:33 sobrado Exp $ */
 /*
- * OpenBSD Specific definitions for the Qlogic ISP Host Adapter
+ * OpenBSD Specific definitions for the QLogic ISP Host Adapter
  */
 /*
  * Copyright (C) 1999, 2000, 2001 by Matthew Jacob
diff --git a/sys/dev/ic/isp_target.c b/sys/dev/ic/isp_target.c
index 24c0e1c6035..d04983a9188 100644
--- a/sys/dev/ic/isp_target.c
+++ b/sys/dev/ic/isp_target.c
@@ -1,6 +1,6 @@
-/* $OpenBSD: isp_target.c,v 1.14 2007/02/14 00:53:48 jsg Exp $ */
+/* $OpenBSD: isp_target.c,v 1.15 2008/01/21 20:00:33 sobrado Exp $ */
 /*
- * Machine and OS Independent Target Mode Code for the Qlogic SCSI/FC adapters.
+ * Machine and OS Independent Target Mode Code for the QLogic SCSI/FC adapters.
  *
  * Copyright (c) 1999, 2000, 2001 by Matthew Jacob
  * All rights reserved.
@@ -66,7 +66,7 @@ static void isp_handle_ctio(struct ispsoftc *, ct_entry_t *);
 static void isp_handle_ctio2(struct ispsoftc *, ct2_entry_t *);
 
 /*
- * The Qlogic driver gets an interrupt to look at response queue entries.
+ * The QLogic driver gets an interrupt to look at response queue entries.
  * Some of these are status completions for initiatior mode commands, but
  * if target mode is enabled, we get a whole wad of response queue entries
  * to be handled here.
@@ -86,7 +86,7 @@ static void isp_handle_ctio2(struct ispsoftc *, ct2_entry_t *);
  * be moved and/or status to be sent) and finally finishing with sending
  * to the f/w's response queue an ATIO which then completes the handshake
  * with the f/w for that command. There's a lot of variations on this theme,
- * including flags you can set in the CTIO for the Qlogic 2X00 fibre channel
+ * including flags you can set in the CTIO for the QLogic 2X00 fibre channel
  * cards that 'auto-replenish' the f/w's ATIO count, but this is the basic
  * gist of it.
  *
diff --git a/sys/dev/ic/isp_target.h b/sys/dev/ic/isp_target.h
index ba571eb52a3..30be9e4a50a 100644
--- a/sys/dev/ic/isp_target.h
+++ b/sys/dev/ic/isp_target.h
@@ -1,8 +1,8 @@
-/*	$OpenBSD: isp_target.h,v 1.11 2002/08/17 17:42:04 mjacob Exp $	*/
+/*	$OpenBSD: isp_target.h,v 1.12 2008/01/21 20:00:33 sobrado Exp $	*/
 
 /* @(#)isp_target.h 1.3 */
 /*
- * Qlogic Target Mode Structure and Flag Definitions
+ * QLogic Target Mode Structure and Flag Definitions
  *
  * Copyright (c) 1997, 1998
  * Patrick Stirling
@@ -513,7 +513,7 @@ typedef struct {
 #ifdef	ISP_TARGET_FUNCTIONS
 /*
  * The functions below are for the publicly available
- * target mode functions that are internal to the Qlogic driver.
+ * target mode functions that are internal to the QLogic driver.
  */
 
 /*
diff --git a/sys/dev/ic/isp_tpublic.h b/sys/dev/ic/isp_tpublic.h
index 7b2dcc743c7..c590765cb33 100644
--- a/sys/dev/ic/isp_tpublic.h
+++ b/sys/dev/ic/isp_tpublic.h
@@ -1,6 +1,6 @@
-/* $OpenBSD: isp_tpublic.h,v 1.9 2007/04/10 17:47:55 miod Exp $ */
+/* $OpenBSD: isp_tpublic.h,v 1.10 2008/01/21 20:00:33 sobrado Exp $ */
 /*
- * Qlogic ISP Host Adapter Public Target Interface Structures && Routines
+ * QLogic ISP Host Adapter Public Target Interface Structures && Routines
  *---------------------------------------
  * Copyright (c) 2000, 2001 by Matthew Jacob
  * All rights reserved.
@@ -97,7 +97,7 @@ typedef struct {
  * bus host adapters) that this applies to (consider it an extra Port
  * parameter). The iid, tgt and lun values are deliberately chosen to be
  * fat so that, for example, World Wide Names can be used instead of
- * the units that the Qlogic firmware uses (in the case where the MD
+ * the units that the QLogic firmware uses (in the case where the MD
  * layer maintains a port database, for example).
  *
  * The cd_tagtype field specifies what kind of command tag has been
@@ -107,11 +107,11 @@ typedef struct {
  *
  * N.B.: when the MD layer sends this command to outside software
  * the outside software likely *MUST* return the same cd_tagval that
- * was in place because this value is likely what the Qlogic f/w uses
+ * was in place because this value is likely what the QLogic f/w uses
  * to identify a command.
  *
  * The cd_cdb contains storage for the passed in command descriptor block.
- * This is the maximum size we can get out of the Qlogic f/w. There's no
+ * This is the maximum size we can get out of the QLogic f/w. There's no
  * passed in length because whoever decodes the command to act upon it
  * will know what the appropriate length is.
  *
@@ -241,7 +241,7 @@ typedef struct tmd_cmd {
 #define	CDFH_PRIVATE_0	0x80		/* private layer flags */
 
 /*
- * Action codes set by the Qlogic MD target driver for
+ * Action codes set by the QLogic MD target driver for
  * the external layer to figure out what to do with.
  */
 typedef enum {
@@ -255,7 +255,7 @@ typedef enum {
 
 /*
  * Action codes set by the external layer for the
- * MD Qlogic driver to figure out what to do with.
+ * MD QLogic driver to figure out what to do with.
  */
 typedef enum {
 	QIN_HBA_REG=6,	/* the argument is a pointer to a hba_register_t */
@@ -270,16 +270,16 @@ typedef enum {
  * A word about the START/CONT/DONE/FIN dance:
  *
  *	When the HBA is enabled for receiving commands, one may	show up
- *	without notice. When that happens, the Qlogic target mode driver
+ *	without notice. When that happens, the QLogic target mode driver
  *	gets a tmd_cmd_t, fills it with the info that just arrived, and
  *	calls the outer layer with a QOUT_TMD_START code and pointer to
  *	the tmd_cmd_t.
  *
  *	The outer layer decodes the command, fetches data, prepares stuff,
  *	whatever, and starts by passing back the pointer with a QIN_TMD_CONT
- *	code which causes the Qlogic target mode driver to generate CTIOs to
+ *	code which causes the QLogic target mode driver to generate CTIOs to
  *	satisfy whatever action needs to be taken. When those CTIOs complete,
- *	the Qlogic target driver sends the pointer to the cmd_tmd_t back with
+ *	the QLogic target driver sends the pointer to the cmd_tmd_t back with
  *	a QOUT_TMD_DONE code. This repeats for as long as necessary.
  *
  *	The outer layer signals it wants to end the command by settings within
diff --git a/sys/dev/ic/ispmbox.h b/sys/dev/ic/ispmbox.h
index ec855c78953..ed46ebec861 100644
--- a/sys/dev/ic/ispmbox.h
+++ b/sys/dev/ic/ispmbox.h
@@ -1,6 +1,6 @@
-/*     $OpenBSD: ispmbox.h,v 1.19 2003/03/03 18:38:10 mjacob Exp $ */
+/*     $OpenBSD: ispmbox.h,v 1.20 2008/01/21 20:00:33 sobrado Exp $ */
 /*
- * Mailbox and Queue Entry Definitions for for Qlogic ISP SCSI adapters.
+ * Mailbox and Queue Entry Definitions for for QLogic ISP SCSI adapters.
  *
  * Copyright (c) 1997, 1998, 1999, 2000 by Matthew Jacob
  * All rights reserved.
@@ -451,7 +451,7 @@ typedef struct {
 } ispstatus_cont_t;
 
 /* 
- * For Qlogic 2X00, the high order byte of SCSI status has
+ * For QLogic 2X00, the high order byte of SCSI status has
  * additional meaning.
  */
 #define	RQCS_RU	0x800	/* Residual Under */
@@ -704,7 +704,7 @@ typedef struct isp_icb {
  * This is an at most 128 byte map that returns either
  * the LILP or Firmware generated list of ports.
  *
- * We deviate a bit from the returned qlogic format to
+ * We deviate a bit from the returned QLogic format to
  * use an extra bit to say whether this was a LILP or
  * f/w generated map.
  */
diff --git a/sys/dev/ic/ispreg.h b/sys/dev/ic/ispreg.h
index 206a11bdbc4..75b15f8e37e 100644
--- a/sys/dev/ic/ispreg.h
+++ b/sys/dev/ic/ispreg.h
@@ -1,7 +1,7 @@
-/*	$OpenBSD: ispreg.h,v 1.13 2003/10/21 18:58:49 jmc Exp $ */
+/*	$OpenBSD: ispreg.h,v 1.14 2008/01/21 20:00:33 sobrado Exp $ */
 /*
  * Machine Independent (well, as best as possible) register
- * definitions for Qlogic ISP SCSI adapters.
+ * definitions for QLogic ISP SCSI adapters.
  *
  * Copyright (c) 1997, 1998, 1999, 2000 by Matthew Jacob
  * All rights reserved.
@@ -31,7 +31,7 @@
 #define	_ISPREG_H
 
 /*
- * Hardware definitions for the Qlogic ISP  registers.
+ * Hardware definitions for the QLogic ISP registers.
  */
 
 /*
@@ -681,7 +681,7 @@
 #define	ISPBSMX(c, byte, shift, mask)	\
 	(((c)[(byte)] >> (shift)) & (mask))
 /*
- * Qlogic 1020/1040 NVRAM is an array of 128 bytes.
+ * QLogic 1020/1040 NVRAM is an array of 128 bytes.
  *
  * Some portion of the front of this is for general host adapter properties
  * This is followed by an array of per-target parameters, and is tailed off
@@ -741,7 +741,7 @@
 #define	ISP_NVRAM_TGT_LUN_DISABLE(c, t)		ISPBSMX(c, _IxT(t, 3), 5, 0x01)
 
 /*
- * Qlogic 1080/1240 NVRAM is an array of 256 bytes.
+ * QLogic 1080/1240 NVRAM is an array of 256 bytes.
  *
  * Some portion of the front of this is for general host adapter properties
  * This is followed by an array of per-target parameters, and is tailed off
@@ -924,7 +924,7 @@
 	ISPBSMX(c, _IxT16(t, 4, (b)), 7, 0x01)
 
 /*
- * Qlogic 2XXX NVRAM is an array of 256 bytes.
+ * QLogic 2XXX NVRAM is an array of 256 bytes.
  *
  * Some portion of the front of this is for general RISC engine parameters,
  * mostly reflecting the state of the last INITIALIZE FIRMWARE mailbox command.
diff --git a/sys/dev/ic/ispvar.h b/sys/dev/ic/ispvar.h
index f5a79060800..93368f4fd11 100644
--- a/sys/dev/ic/ispvar.h
+++ b/sys/dev/ic/ispvar.h
@@ -1,6 +1,6 @@
-/*     $OpenBSD: ispvar.h,v 1.23 2007/04/10 17:47:55 miod Exp $ */
+/*     $OpenBSD: ispvar.h,v 1.24 2008/01/21 20:00:33 sobrado Exp $ */
 /*
- * Soft Definitions for for Qlogic ISP SCSI adapters.
+ * Soft Definitions for for QLogic ISP SCSI adapters.
  *
  * Copyright (c) 1997, 1998, 1999, 2000 by Matthew Jacob
  * All rights reserved.
@@ -653,7 +653,7 @@ void isp_done(XS_T *);
  * below).
  *
  * ISPCTL_SCAN_LOOP does a local loop scan. This is only done if the connection
- * topology is NL or FL port (private or public loop). Since the Qlogic f/w
+ * topology is NL or FL port (private or public loop). Since the QLogic f/w
  * 'automatically' manages local loop connections, this function essentially
  * notes the arrival, departure, and possible shuffling around of local loop
  * entities. Thus for each arrival and departure this generates an isp_async
@@ -883,7 +883,7 @@ void isp_prt(struct ispsoftc *, int level, const char *, ...);
  *		read from NVRAM (possibly corrected for card botches).
  *		Each platform can take that information and override
  *		it or ignore and return the Node and Port WWNs to be
- * 		used when sending the Qlogic f/w the Initialization Control
+ * 		used when sending the QLogic f/w the Initialization Control
  *		Block.
  *
  *	(XXX these do endian specific transformations- in transition XXX)
diff --git a/sys/dev/pci/files.pci b/sys/dev/pci/files.pci
index 80a4a4fec3a..d303c4123f7 100644
--- a/sys/dev/pci/files.pci
+++ b/sys/dev/pci/files.pci
@@ -1,4 +1,4 @@
-#	$OpenBSD: files.pci,v 1.249 2007/12/31 14:51:19 dlg Exp $
+#	$OpenBSD: files.pci,v 1.250 2008/01/21 20:00:33 sobrado Exp $
 #	$NetBSD: files.pci,v 1.20 1996/09/24 17:47:15 christos Exp $
 #
 # Config file and device description for machine-independent PCI code.
@@ -208,7 +208,7 @@ file	dev/pci/cac_pci.c		cac_pci
 attach	ciss at pci with ciss_pci
 file	dev/pci/ciss_pci.c		ciss_pci
 
-# Qlogic ISP 10x0 (PCI) family
+# QLogic ISP 10x0 (PCI) family
 # device declaration in sys/conf/files
 attach	isp at pci with isp_pci
 file	dev/pci/isp_pci.c		isp_pci
diff --git a/sys/dev/pci/isp_pci.c b/sys/dev/pci/isp_pci.c
index 8b278b788c4..ded079a6bb0 100644
--- a/sys/dev/pci/isp_pci.c
+++ b/sys/dev/pci/isp_pci.c
@@ -1,6 +1,6 @@
-/*	$OpenBSD: isp_pci.c,v 1.40 2007/09/22 16:03:23 krw Exp $	*/
+/*	$OpenBSD: isp_pci.c,v 1.41 2008/01/21 20:00:33 sobrado Exp $	*/
 /*
- * PCI specific probe and attach routines for Qlogic ISP SCSI adapters.
+ * PCI specific probe and attach routines for QLogic ISP SCSI adapters.
  *
  *---------------------------------------
  * Copyright (c) 1997, 1998, 1999 by Matthew Jacob
@@ -334,7 +334,7 @@ struct cfattach isp_pci_ca = {
 
 #ifdef  DEBUG
 const char vstring[] =
-    "Qlogic ISP Driver, NetBSD (pci) Platform Version %d.%d Core Version %d.%d";
+    "QLogic ISP Driver, NetBSD (pci) Platform Version %d.%d Core Version %d.%d";
 #endif
 
 const struct pci_matchid ispdev[] = {
diff --git a/sys/dev/sbus/isp_sbus.c b/sys/dev/sbus/isp_sbus.c
index a9703d5a39b..0abb1879d31 100644
--- a/sys/dev/sbus/isp_sbus.c
+++ b/sys/dev/sbus/isp_sbus.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: isp_sbus.c,v 1.10 2007/09/11 13:39:34 gilles Exp $	*/
+/*	$OpenBSD: isp_sbus.c,v 1.11 2008/01/21 20:00:33 sobrado Exp $	*/
 /* $NetBSD: isp_sbus.c,v 1.46 2001/09/26 20:53:14 eeh Exp $ */
 
 /*
@@ -30,7 +30,7 @@
  * Please coordinate with Matthew Jacob on changes you wish to make here.
  */
 /*
- * SBus specific probe and attach routines for Qlogic ISP SCSI adapters.
+ * SBus specific probe and attach routines for QLogic ISP SCSI adapters.
  *
  * Copyright (c) 1997, 2001 by Matthew Jacob
  * NASA AMES Research Center
@@ -142,7 +142,7 @@ isp_match(struct device *parent, void *vcf, void *aux)
 #ifdef DEBUG
 	if (rv && oneshot) {
 		oneshot = 0;
-		printf("Qlogic ISP Driver, NetBSD (sbus) Platform Version "
+		printf("QLogic ISP Driver, NetBSD (sbus) Platform Version "
 		    "%d.%d Core Version %d.%d\n",
 		    ISP_PLATFORM_VERSION_MAJOR, ISP_PLATFORM_VERSION_MINOR,
 		    ISP_CORE_VERSION_MAJOR, ISP_CORE_VERSION_MINOR);