Import LLVM 10.0.0 release including clang, lld and lldb.

ok hackroom
tested by plenty

1 files changed, 284 insertions, 0 deletions

diff --git a/gnu/llvm/lldb/packages/Python/lldbsuite/test/concurrent_base.py b/gnu/llvm/lldb/packages/Python/lldbsuite/test/concurrent_base.py
new file mode 100644
index 00000000000..6acd71ce9e4
--- /dev/null
+++ b/gnu/llvm/lldb/packages/Python/lldbsuite/test/concurrent_base.py
@@ -0,0 +1,284 @@
+"""
+A stress-test of sorts for LLDB's handling of threads in the inferior.
+
+This test sets a breakpoint in the main thread where test parameters (numbers of
+threads) can be adjusted, runs the inferior to that point, and modifies the
+locals that control the event thread counts. This test also sets a breakpoint in
+breakpoint_func (the function executed by each 'breakpoint' thread) and a
+watchpoint on a global modified in watchpoint_func. The inferior is continued
+until exit or a crash takes place, and the number of events seen by LLDB is
+verified to match the expected number of events.
+"""
+
+
+
+import unittest2
+import lldb
+from lldbsuite.test.decorators import *
+from lldbsuite.test.lldbtest import *
+from lldbsuite.test import lldbutil
+
+
+class ConcurrentEventsBase(TestBase):
+
+    # Concurrency is the primary test factor here, not debug info variants.
+    NO_DEBUG_INFO_TESTCASE = True
+
+    def setUp(self):
+        # Call super's setUp().
+        super(ConcurrentEventsBase, self).setUp()
+        # Find the line number for our breakpoint.
+        self.filename = 'main.cpp'
+        self.thread_breakpoint_line = line_number(
+            self.filename, '// Set breakpoint here')
+        self.setup_breakpoint_line = line_number(
+            self.filename, '// Break here and adjust num')
+        self.finish_breakpoint_line = line_number(
+            self.filename, '// Break here and verify one thread is active')
+
+    def describe_threads(self):
+        ret = []
+        for x in self.inferior_process:
+            id = x.GetIndexID()
+            reason = x.GetStopReason()
+            status = "stopped" if x.IsStopped() else "running"
+            reason_str = lldbutil.stop_reason_to_str(reason)
+            if reason == lldb.eStopReasonBreakpoint:
+                bpid = x.GetStopReasonDataAtIndex(0)
+                bp = self.inferior_target.FindBreakpointByID(bpid)
+                reason_str = "%s hit %d times" % (
+                    lldbutil.get_description(bp), bp.GetHitCount())
+            elif reason == lldb.eStopReasonWatchpoint:
+                watchid = x.GetStopReasonDataAtIndex(0)
+                watch = self.inferior_target.FindWatchpointByID(watchid)
+                reason_str = "%s hit %d times" % (
+                    lldbutil.get_description(watch), watch.GetHitCount())
+            elif reason == lldb.eStopReasonSignal:
+                signals = self.inferior_process.GetUnixSignals()
+                signal_name = signals.GetSignalAsCString(
+                    x.GetStopReasonDataAtIndex(0))
+                reason_str = "signal %s" % signal_name
+
+            location = "\t".join([lldbutil.get_description(
+                x.GetFrameAtIndex(i)) for i in range(x.GetNumFrames())])
+            ret.append(
+                "thread %d %s due to %s at\n\t%s" %
+                (id, status, reason_str, location))
+        return ret
+
+    def add_breakpoint(self, line, descriptions):
+        """ Adds a breakpoint at self.filename:line and appends its description to descriptions, and
+            returns the LLDB SBBreakpoint object.
+        """
+
+        bpno = lldbutil.run_break_set_by_file_and_line(
+            self, self.filename, line, num_expected_locations=-1)
+        bp = self.inferior_target.FindBreakpointByID(bpno)
+        descriptions.append(
+            ": file = 'main.cpp', line = %d" %
+            self.finish_breakpoint_line)
+        return bp
+
+    def inferior_done(self):
+        """ Returns true if the inferior is done executing all the event threads (and is stopped at self.finish_breakpoint,
+            or has terminated execution.
+        """
+        return self.finish_breakpoint.GetHitCount() > 0 or \
+            self.crash_count > 0 or \
+            self.inferior_process.GetState() == lldb.eStateExited
+
+    def count_signaled_threads(self):
+        count = 0
+        for thread in self.inferior_process:
+            if thread.GetStopReason() == lldb.eStopReasonSignal and thread.GetStopReasonDataAtIndex(
+                    0) == self.inferior_process.GetUnixSignals().GetSignalNumberFromName('SIGUSR1'):
+                count += 1
+        return count
+
+    def do_thread_actions(self,
+                          num_breakpoint_threads=0,
+                          num_signal_threads=0,
+                          num_watchpoint_threads=0,
+                          num_crash_threads=0,
+                          num_delay_breakpoint_threads=0,
+                          num_delay_signal_threads=0,
+                          num_delay_watchpoint_threads=0,
+                          num_delay_crash_threads=0):
+        """ Sets a breakpoint in the main thread where test parameters (numbers of threads) can be adjusted, runs the inferior
+            to that point, and modifies the locals that control the event thread counts. Also sets a breakpoint in
+            breakpoint_func (the function executed by each 'breakpoint' thread) and a watchpoint on a global modified in
+            watchpoint_func. The inferior is continued until exit or a crash takes place, and the number of events seen by LLDB
+            is verified to match the expected number of events.
+        """
+        exe = self.getBuildArtifact("a.out")
+        self.runCmd("file " + exe, CURRENT_EXECUTABLE_SET)
+
+        # Get the target
+        self.inferior_target = self.dbg.GetSelectedTarget()
+
+        expected_bps = []
+
+        # Initialize all the breakpoints (main thread/aux thread)
+        self.setup_breakpoint = self.add_breakpoint(
+            self.setup_breakpoint_line, expected_bps)
+        self.finish_breakpoint = self.add_breakpoint(
+            self.finish_breakpoint_line, expected_bps)
+
+        # Set the thread breakpoint
+        if num_breakpoint_threads + num_delay_breakpoint_threads > 0:
+            self.thread_breakpoint = self.add_breakpoint(
+                self.thread_breakpoint_line, expected_bps)
+
+        # Verify breakpoints
+        self.expect(
+            "breakpoint list -f",
+            "Breakpoint locations shown correctly",
+            substrs=expected_bps)
+
+        # Run the program.
+        self.runCmd("run", RUN_SUCCEEDED)
+
+        # Check we are at line self.setup_breakpoint
+        self.expect("thread backtrace", STOPPED_DUE_TO_BREAKPOINT,
+                    substrs=["stop reason = breakpoint 1."])
+
+        # Initialize the (single) watchpoint on the global variable (g_watchme)
+        if num_watchpoint_threads + num_delay_watchpoint_threads > 0:
+            self.runCmd("watchpoint set variable g_watchme")
+            for w in self.inferior_target.watchpoint_iter():
+                self.thread_watchpoint = w
+                self.assertTrue(
+                    "g_watchme" in str(
+                        self.thread_watchpoint),
+                    "Watchpoint location not shown correctly")
+
+        # Get the process
+        self.inferior_process = self.inferior_target.GetProcess()
+
+        # We should be stopped at the setup site where we can set the number of
+        # threads doing each action (break/crash/signal/watch)
+        self.assertEqual(
+            self.inferior_process.GetNumThreads(),
+            1,
+            'Expected to stop before any additional threads are spawned.')
+
+        self.runCmd("expr num_breakpoint_threads=%d" % num_breakpoint_threads)
+        self.runCmd("expr num_crash_threads=%d" % num_crash_threads)
+        self.runCmd("expr num_signal_threads=%d" % num_signal_threads)
+        self.runCmd("expr num_watchpoint_threads=%d" % num_watchpoint_threads)
+
+        self.runCmd(
+            "expr num_delay_breakpoint_threads=%d" %
+            num_delay_breakpoint_threads)
+        self.runCmd(
+            "expr num_delay_crash_threads=%d" %
+            num_delay_crash_threads)
+        self.runCmd(
+            "expr num_delay_signal_threads=%d" %
+            num_delay_signal_threads)
+        self.runCmd(
+            "expr num_delay_watchpoint_threads=%d" %
+            num_delay_watchpoint_threads)
+
+        # Continue the inferior so threads are spawned
+        self.runCmd("continue")
+
+        # Make sure we see all the threads. The inferior program's threads all synchronize with a pseudo-barrier; that is,
+        # the inferior program ensures all threads are started and running
+        # before any thread triggers its 'event'.
+        num_threads = self.inferior_process.GetNumThreads()
+        expected_num_threads = num_breakpoint_threads + num_delay_breakpoint_threads \
+            + num_signal_threads + num_delay_signal_threads \
+            + num_watchpoint_threads + num_delay_watchpoint_threads \
+            + num_crash_threads + num_delay_crash_threads + 1
+        self.assertEqual(
+            num_threads,
+            expected_num_threads,
+            'Expected to see %d threads, but seeing %d. Details:\n%s' %
+            (expected_num_threads,
+             num_threads,
+             "\n\t".join(
+                 self.describe_threads())))
+
+        self.signal_count = self.count_signaled_threads()
+        self.crash_count = len(
+            lldbutil.get_crashed_threads(
+                self, self.inferior_process))
+
+        # Run to completion (or crash)
+        while not self.inferior_done():
+            if self.TraceOn():
+                self.runCmd("thread backtrace all")
+            self.runCmd("continue")
+            self.signal_count += self.count_signaled_threads()
+            self.crash_count += len(
+                lldbutil.get_crashed_threads(
+                    self, self.inferior_process))
+
+        if num_crash_threads > 0 or num_delay_crash_threads > 0:
+            # Expecting a crash
+            self.assertTrue(
+                self.crash_count > 0,
+                "Expecting at least one thread to crash. Details: %s" %
+                "\t\n".join(
+                    self.describe_threads()))
+
+            # Ensure the zombie process is reaped
+            self.runCmd("process kill")
+
+        elif num_crash_threads == 0 and num_delay_crash_threads == 0:
+            # There should be a single active thread (the main one) which hit
+            # the breakpoint after joining
+            self.assertEqual(
+                1,
+                self.finish_breakpoint.GetHitCount(),
+                "Expected main thread (finish) breakpoint to be hit once")
+
+            num_threads = self.inferior_process.GetNumThreads()
+            self.assertEqual(
+                1,
+                num_threads,
+                "Expecting 1 thread but seeing %d. Details:%s" %
+                (num_threads,
+                 "\n\t".join(
+                     self.describe_threads())))
+            self.runCmd("continue")
+
+            # The inferior process should have exited without crashing
+            self.assertEqual(
+                0,
+                self.crash_count,
+                "Unexpected thread(s) in crashed state")
+            self.assertEqual(
+                self.inferior_process.GetState(),
+                lldb.eStateExited,
+                PROCESS_EXITED)
+
+            # Verify the number of actions took place matches expected numbers
+            expected_breakpoint_threads = num_delay_breakpoint_threads + num_breakpoint_threads
+            breakpoint_hit_count = self.thread_breakpoint.GetHitCount(
+            ) if expected_breakpoint_threads > 0 else 0
+            self.assertEqual(
+                expected_breakpoint_threads,
+                breakpoint_hit_count,
+                "Expected %d breakpoint hits, but got %d" %
+                (expected_breakpoint_threads,
+                 breakpoint_hit_count))
+
+            expected_signal_threads = num_delay_signal_threads + num_signal_threads
+            self.assertEqual(
+                expected_signal_threads,
+                self.signal_count,
+                "Expected %d stops due to signal delivery, but got %d" %
+                (expected_signal_threads,
+                 self.signal_count))
+
+            expected_watchpoint_threads = num_delay_watchpoint_threads + num_watchpoint_threads
+            watchpoint_hit_count = self.thread_watchpoint.GetHitCount(
+            ) if expected_watchpoint_threads > 0 else 0
+            self.assertEqual(
+                expected_watchpoint_threads,
+                watchpoint_hit_count,
+                "Expected %d watchpoint hits, got %d" %
+                (expected_watchpoint_threads,
+                 watchpoint_hit_count))