Correct the spelling of "transferred" and "transferring"

from Tobias Ulmer (tobiasu at tmux.org); ok jmc@, krw@

13 files changed, 36 insertions, 36 deletions

diff --git a/sys/arch/macppc/dev/tpms.c b/sys/arch/macppc/dev/tpms.c
index 40567c34d76..ce9e1abe07f 100644
--- a/sys/arch/macppc/dev/tpms.c
+++ b/sys/arch/macppc/dev/tpms.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: tpms.c,v 1.15 2010/04/09 17:01:30 jasper Exp $	*/
+/*	$OpenBSD: tpms.c,v 1.16 2012/02/24 06:19:00 guenther Exp $	*/
 
 /*
  * Copyright (c) 2005, Johan Wallén
@@ -128,7 +128,7 @@
  * Magic numbers.
  */
 
-/* The amount of data transfered by the USB device. */
+/* The amount of data transferred by the USB device. */
 #define TPMS_DATA_LEN 81
 
 /* The maximum number of sensors. */
diff --git a/sys/arch/vax/dec/sii.c b/sys/arch/vax/dec/sii.c
index 75cd717b15c..03e0686f5f8 100644
--- a/sys/arch/vax/dec/sii.c
+++ b/sys/arch/vax/dec/sii.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: sii.c,v 1.13 2011/07/17 22:46:47 matthew Exp $	*/
+/*	$OpenBSD: sii.c,v 1.14 2012/02/24 06:19:00 guenther Exp $	*/
 /*	$NetBSD: sii.c,v 1.42 2000/06/02 20:20:29 mhitch Exp $	*/
 /*
  * Copyright (c) 2008 Miodrag Vallat.
@@ -645,7 +645,7 @@ again:
 			printf("%s: Parity error\n", sc->sc_dev.dv_xname);
 			goto abort;
 		}
-		/* dmalen = amount left to transfer, i = amount transfered */
+		/* dmalen = amount left to transfer, i = amount transferred */
 		i = state->dmalen;
 		state->dmalen = 0;
 		state->dmaCurPhase = -1;
@@ -899,7 +899,7 @@ again:
 #endif
 			}
 
-			/* read amount transfered if DMA didn't finish */
+			/* read amount transferred if DMA didn't finish */
 			if (state->dmalen > 0) {
 				i = state->dmalen - regs->dmlotc;
 				state->dmalen = 0;
diff --git a/sys/dev/ata/wdvar.h b/sys/dev/ata/wdvar.h
index b89e7b1c3c8..5d51ddcd4d4 100644
--- a/sys/dev/ata/wdvar.h
+++ b/sys/dev/ata/wdvar.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: wdvar.h,v 1.18 2011/09/22 22:12:45 deraadt Exp $	*/
+/*	$OpenBSD: wdvar.h,v 1.19 2012/02/24 06:19:00 guenther Exp $	*/
 /*	$NetBSD: wdvar.h,v 1.3 1998/11/11 19:38:27 bouyer Exp $	*/
 
 /*
@@ -44,8 +44,8 @@ struct ata_bio {
     struct disklabel *lp; /* pointer to drive's label info */
     daddr64_t blkno; /* block addr */
     daddr64_t blkdone; /* number of blks transferred */
-    daddr64_t nblks; /* number of block currently transfering */
-    int     nbytes; /* number of bytes currently transfering */
+    daddr64_t nblks; /* number of block currently transferring */
+    int     nbytes; /* number of bytes currently transferring */
     long    bcount; /* total number of bytes */
     char   *databuf; /* data buffer address */
     volatile int error;
diff --git a/sys/dev/ic/aic79xx.c b/sys/dev/ic/aic79xx.c
index 2fc227c23b4..d0aa0b0e21d 100644
--- a/sys/dev/ic/aic79xx.c
+++ b/sys/dev/ic/aic79xx.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: aic79xx.c,v 1.48 2011/04/19 21:59:51 chl Exp $	*/
+/*	$OpenBSD: aic79xx.c,v 1.49 2012/02/24 06:19:00 guenther Exp $	*/
 
 /*
  * Copyright (c) 2004 Milos Urbanek, Kenneth R. Westerback & Marco Peereboom
@@ -1225,7 +1225,7 @@ ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat)
 		 * that requires host assistance for completion.
 		 * While handling the message phase(s), we will be
 		 * notified by the sequencer after each byte is
-		 * transfered so we can track bus phase changes.
+		 * transferred so we can track bus phase changes.
 		 *
 		 * If this is the first time we've seen a HOST_MSG_LOOP
 		 * interrupt, initialize the state of the host message
diff --git a/sys/dev/ic/aic79xx.h b/sys/dev/ic/aic79xx.h
index 28e6d6dac60..a3578cd4d1e 100644
--- a/sys/dev/ic/aic79xx.h
+++ b/sys/dev/ic/aic79xx.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: aic79xx.h,v 1.21 2006/12/21 02:28:47 krw Exp $	*/
+/*	$OpenBSD: aic79xx.h,v 1.22 2012/02/24 06:19:00 guenther Exp $	*/
 
 /*
  * Copyright (c) 2004 Milos Urbanek, Kenneth R. Westerback & Marco Peereboom
@@ -519,7 +519,7 @@ struct hardware_scb {
  *	o A residual has occurred if SG_FULL_RESID is set in sgptr,
  *	  or residual_sgptr does not have SG_LIST_NULL set.
  *
- *	o We are transfering the last segment if residual_datacnt has
+ *	o We are transferring the last segment if residual_datacnt has
  *	  the SG_LAST_SEG flag set.
  *
  * Host:
@@ -562,7 +562,7 @@ struct hardware_scb {
  */
 
 /*
- * Definition of a scatter/gather element as transfered to the controller.
+ * Definition of a scatter/gather element as transferred to the controller.
  * The aic7xxx chips only support a 24bit length.  We use the top byte of
  * the length to store additional address bits and a flag to indicate
  * that a given segment terminates the transfer.  This gives us an
diff --git a/sys/dev/ic/aic79xx_openbsd.c b/sys/dev/ic/aic79xx_openbsd.c
index bba6da338e3..8638f0c5c25 100644
--- a/sys/dev/ic/aic79xx_openbsd.c
+++ b/sys/dev/ic/aic79xx_openbsd.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: aic79xx_openbsd.c,v 1.37 2010/06/28 18:31:02 krw Exp $	*/
+/*	$OpenBSD: aic79xx_openbsd.c,v 1.38 2012/02/24 06:19:00 guenther Exp $	*/
 
 /*
  * Copyright (c) 2004 Milos Urbanek, Kenneth R. Westerback & Marco Peereboom
@@ -237,7 +237,7 @@ ahd_done(struct ahd_softc *ahd, struct scb *scb)
 		 *
 		 * Zero any sense not transferred by the
 		 * device.  The SCSI spec mandates that any
-		 * untransfered data should be assumed to be
+		 * untransferred data should be assumed to be
 		 * zero.  Complete the 'bounce' of sense information
 		 * through buffers accessible via bus-space by
 		 * copying it into the clients csio.
diff --git a/sys/dev/ic/aic7xxxvar.h b/sys/dev/ic/aic7xxxvar.h
index a1275bc2432..d386a0d9d4e 100644
--- a/sys/dev/ic/aic7xxxvar.h
+++ b/sys/dev/ic/aic7xxxvar.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: aic7xxxvar.h,v 1.24 2007/08/04 14:37:34 krw Exp $	*/
+/*	$OpenBSD: aic7xxxvar.h,v 1.25 2012/02/24 06:19:00 guenther Exp $	*/
 /*
  * Core definitions and data structures shareable across OS platforms.
  *
@@ -38,7 +38,7 @@
  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGES.
  *
- * $Id: aic7xxxvar.h,v 1.24 2007/08/04 14:37:34 krw Exp $
+ * $Id: aic7xxxvar.h,v 1.25 2012/02/24 06:19:00 guenther Exp $
  *
  * $FreeBSD: src/sys/dev/aic7xxx/aic7xxx.h,v 1.50 2003/12/17 00:02:09 gibbs Exp $
  */
@@ -459,7 +459,7 @@ struct hardware_scb {
  *	o A residual has occurred if SG_FULL_RESID is set in sgptr,
  *	  or residual_sgptr does not have SG_LIST_NULL set.
  *
- *	o We are transfering the last segment if residual_datacnt has
+ *	o We are transferring the last segment if residual_datacnt has
  *	  the SG_LAST_SEG flag set.
  *
  * Host:
diff --git a/sys/dev/ic/siop_common.c b/sys/dev/ic/siop_common.c
index 45a1e904c0d..e6b47b0a4f7 100644
--- a/sys/dev/ic/siop_common.c
+++ b/sys/dev/ic/siop_common.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: siop_common.c,v 1.34 2010/07/23 07:47:13 jsg Exp $ */
+/*	$OpenBSD: siop_common.c,v 1.35 2012/02/24 06:19:00 guenther Exp $ */
 /*	$NetBSD: siop_common.c,v 1.37 2005/02/27 00:27:02 perry Exp $	*/
 
 /*
@@ -805,24 +805,24 @@ siop_sdp(siop_cmd, offset)
 #endif
 	/*
 	 * Save data pointer. We do this by adjusting the tables to point
-	 * at the beginning of the data not yet transfered. 
-	 * offset points to the first table with untransfered data.
+	 * at the beginning of the data not yet transferred.
+	 * offset points to the first table with untransferred data.
 	 */
 
 	/*
 	 * before doing that we decrease resid from the amount of data which
-	 * has been transfered.
+	 * has been transferred.
 	 */
 	siop_update_resid(siop_cmd, offset);
 
 	/*
 	 * First let see if we have a resid from a phase mismatch. If so,
-	 * we have to adjst the table at offset to remove transfered data.
+	 * we have to adjst the table at offset to remove transferred data.
 	 */
 	if (siop_cmd->flags & CMDFL_RESID) {
 		siop_cmd->flags &= ~CMDFL_RESID;
 		table = &siop_cmd->siop_tables->data[offset];
-		/* "cut" already transfered data from this table */
+		/* "cut" already transferred data from this table */
 		table->addr =
 		    siop_htoc32(sc, siop_ctoh32(sc, table->addr) +
 		    siop_ctoh32(sc, table->count) - siop_cmd->resid);
@@ -830,7 +830,7 @@ siop_sdp(siop_cmd, offset)
 	}
 
 	/*
-	 * now we can remove entries which have been transfered.
+	 * now we can remove entries which have been transferred.
 	 * We just move the entries with data left at the beginning of the
 	 * tables
 	 */
diff --git a/sys/dev/ic/xl.c b/sys/dev/ic/xl.c
index d7879ed8a5f..1ef4ab1b150 100644
--- a/sys/dev/ic/xl.c
+++ b/sys/dev/ic/xl.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: xl.c,v 1.104 2011/07/14 16:38:27 stsp Exp $	*/
+/*	$OpenBSD: xl.c,v 1.105 2012/02/24 06:19:00 guenther Exp $	*/
 
 /*
  * Copyright (c) 1997, 1998, 1999
@@ -77,7 +77,7 @@
  */
 
 /*
- * The 3c90x series chips use a bus-master DMA interface for transfering
+ * The 3c90x series chips use a bus-master DMA interface for transferring
  * packets to and from the controller chip. Some of the "vortex" cards
  * (3c59x) also supported a bus master mode, however for those chips
  * you could only DMA packets to/from a contiguous memory buffer. For
diff --git a/sys/dev/pci/if_sk.c b/sys/dev/pci/if_sk.c
index d5a0df10651..0c357fc8800 100644
--- a/sys/dev/pci/if_sk.c
+++ b/sys/dev/pci/if_sk.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: if_sk.c,v 1.160 2011/06/22 16:44:27 tedu Exp $	*/
+/*	$OpenBSD: if_sk.c,v 1.161 2012/02/24 06:19:00 guenther Exp $	*/
 
 /*
  * Copyright (c) 1997, 1998, 1999, 2000
@@ -2302,7 +2302,7 @@ sk_init_xmac(struct sk_if_softc	*sc_if)
 	 * that jumbo frames larger than 8192 bytes will be
 	 * truncated. Disabling all bad frame filtering causes
 	 * the RX FIFO to operate in streaming mode, in which
-	 * case the XMAC will start transfering frames out of the
+	 * case the XMAC will start transferring frames out of the
 	 * RX FIFO as soon as the FIFO threshold is reached.
 	 */
 	SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_BADFRAMES|
diff --git a/sys/dev/usb/if_atu.c b/sys/dev/usb/if_atu.c
index 5f1659bae15..adf88148695 100644
--- a/sys/dev/usb/if_atu.c
+++ b/sys/dev/usb/if_atu.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: if_atu.c,v 1.100 2011/09/18 23:24:12 krw Exp $ */
+/*	$OpenBSD: if_atu.c,v 1.101 2012/02/24 06:19:00 guenther Exp $ */
 /*
  * Copyright (c) 2003, 2004
  *	Daan Vreeken <Danovitsch@Vitsch.net>.  All rights reserved.
@@ -339,7 +339,7 @@ atu_usb_request(struct atu_softc *sc, u_int8_t type,
 #ifdef ATU_DEBUG
 	if (atudebug) {
 		if (type & UT_READ) {
-			DPRINTFN(20, ("%s: transfered 0x%x bytes in\n",
+			DPRINTFN(20, ("%s: transferred 0x%x bytes in\n",
 			    sc->atu_dev.dv_xname, total_len));
 			DPRINTFN(20, ("%s: dump [%10D]\n",
 			    sc->atu_dev.dv_xname, data, " "));
diff --git a/sys/dev/usb/uvisor.c b/sys/dev/usb/uvisor.c
index dfa2645339e..ba57360c583 100644
--- a/sys/dev/usb/uvisor.c
+++ b/sys/dev/usb/uvisor.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: uvisor.c,v 1.44 2011/07/03 15:47:18 matthew Exp $	*/
+/*	$OpenBSD: uvisor.c,v 1.45 2012/02/24 06:19:00 guenther Exp $	*/
 /*	$NetBSD: uvisor.c,v 1.21 2003/08/03 21:59:26 nathanw Exp $	*/
 
 /*
@@ -66,7 +66,7 @@ int uvisordebug = 0;
 /* From the Linux driver */
 /*
  * UVISOR_REQUEST_BYTES_AVAILABLE asks the visor for the number of bytes that
- * are available to be transfered to the host for the specified endpoint.
+ * are available to be transferred to the host for the specified endpoint.
  * Currently this is not used, and always returns 0x0001
  */
 #define UVISOR_REQUEST_BYTES_AVAILABLE		0x01
diff --git a/sys/netinet/tcp_usrreq.c b/sys/netinet/tcp_usrreq.c
index 78320828840..d2780b1e8e1 100644
--- a/sys/netinet/tcp_usrreq.c
+++ b/sys/netinet/tcp_usrreq.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: tcp_usrreq.c,v 1.109 2012/01/03 21:50:12 bluhm Exp $	*/
+/*	$OpenBSD: tcp_usrreq.c,v 1.110 2012/02/24 06:19:00 guenther Exp $	*/
 /*	$NetBSD: tcp_usrreq.c,v 1.20 1996/02/13 23:44:16 christos Exp $	*/
 
 /*
@@ -997,9 +997,9 @@ tcp_update_sndspace(struct tcpcb *tp)
 }
 
 /*
- * Scale the recv buffer by looking at how much data was transfered in
+ * Scale the recv buffer by looking at how much data was transferred in
  * on approximated RTT. If more then a big part of the recv buffer was
- * transfered during that time we increase the buffer by a constant.
+ * transferred during that time we increase the buffer by a constant.
  * In low memory situation try to shrink the buffer to the initial size.
  */
 void