diff options
Diffstat (limited to 'sys/arch/sgi/gio/lightreg.h')
| -rw-r--r-- | sys/arch/sgi/gio/lightreg.h | 87 |
1 files changed, 87 insertions, 0 deletions
diff --git a/sys/arch/sgi/gio/lightreg.h b/sys/arch/sgi/gio/lightreg.h new file mode 100644 index 00000000000..d6926717a1e --- /dev/null +++ b/sys/arch/sgi/gio/lightreg.h @@ -0,0 +1,87 @@ +/* $OpenBSD: lightreg.h,v 1.1 2012/04/17 15:36:55 miod Exp $ */ +/* $NetBSD: lightreg.h,v 1.3 2006/12/29 00:31:48 rumble Exp $ */ + +/* + * Copyright (c) 2006 Stephen M. Rumble + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#define LIGHT_ADDR_0 0x1f3f0000 +#define LIGHT_ADDR_1 0x1f3f8000 /* dual head */ +#define LIGHT_SIZE 0x00008000 + +#define REX_PAGE0_SET 0x00000000 /* REX registers */ +#define REX_PAGE0_GO 0x00000800 +#define REX_PAGE1_SET 0x00004790 /* configuration registers */ +#define REX_PAGE1_GO 0x00004F90 + +/* REX register offsets (from REX_PAGE0_{SET,GO}) */ +#define REX_P0REG_COMMAND 0x00000000 +#define REX_P0REG_XSTARTI 0x0000000C +#define REX_P0REG_YSTARTI 0x0000001C +#define REX_P0REG_XYMOVE 0x00000034 +#define REX_P0REG_COLORREDI 0x00000038 +#define REX_P0REG_COLORGREENI 0x00000040 +#define REX_P0REG_COLORBLUEI 0x00000048 +#define REX_P0REG_COLORBACK 0x0000005C +#define REX_P0REG_ZPATTERN 0x00000060 +#define REX_P0REG_XENDI 0x00000084 +#define REX_P0REG_YENDI 0x00000088 + +/* configuration register offsets (from REX_PAGE1_{SET,GO}) */ +#define REX_P1REG_WCLOCKREV 0x00000054 /* nsclock / revision */ +#define REX_P1REG_CFGSEL 0x0000005c /* function selector */ +#define REX_P1REG_VC1_ADDRDATA 0x00000060 /* vc1 r/w addr and data 8bit */ +#define REX_P1REG_CFGMODE 0x00000068 /* REX system config */ +#define REX_P1REG_XYOFFSET 0x0000006c /* x, y start of screen */ + +/* REX opcodes */ +#define REX_OP_NOP 0x00000000 +#define REX_OP_DRAW 0x00000001 + +/* REX command flags */ +#define REX_OP_FLG_BLOCK 0x00000008 +#define REX_OP_FLG_LENGTH32 0x00000010 +#define REX_OP_FLG_QUADMODE 0x00000020 +#define REX_OP_FLG_XYCONTINUE 0x00000080 +#define REX_OP_FLG_STOPONX 0x00000100 +#define REX_OP_FLG_STOPONY 0x00000200 +#define REX_OP_FLG_ENZPATTERN 0x00000400 +#define REX_OP_FLG_LOGICSRC 0x00080000 +#define REX_OP_FLG_ZOPAQUE 0x00800000 +#define REX_OP_FLG_ZCONTINUE 0x01000000 + +/* REX logicops */ +#define REX_LOGICOP_SHIFT 28 + +/* configmode bits */ +#define REX_CFGMODE_BUSY 0x00000001 + +/* configsel bits */ +#define REX_CFGSEL_VC1_LADDR 0x00000004 /* low address bits */ +#define REX_CFGSEL_VC1_HADDR 0x00000005 /* high address bits */ +#define REX_CFGSEL_VC1_SYSCTL 0x00000006 + +/* vc1 sysctl bits (byte) */ +#define VC1_SYSCTL_VIDEO_ON 0x04 +#define VC1_SYSCTL_CURSOR 0x10 +#define VC1_SYSCTL_CURSOR_ON 0x20 |