diff options
Diffstat (limited to 'usr.sbin/nginx/src/pcre/config.h')
| -rw-r--r-- | usr.sbin/nginx/src/pcre/config.h | 350 |
1 files changed, 0 insertions, 350 deletions
diff --git a/usr.sbin/nginx/src/pcre/config.h b/usr.sbin/nginx/src/pcre/config.h deleted file mode 100644 index 76dce45094a..00000000000 --- a/usr.sbin/nginx/src/pcre/config.h +++ /dev/null @@ -1,350 +0,0 @@ -/* config.h. Generated from config.h.in by configure. */ -/* config.h.in. Generated from configure.ac by autoheader. */ - - -/* PCRE is written in Standard C, but there are a few non-standard things it -can cope with, allowing it to run on SunOS4 and other "close to standard" -systems. - -In environments that support the facilities, config.h.in is converted by -"configure", or config-cmake.h.in is converted by CMake, into config.h. If you -are going to build PCRE "by hand" without using "configure" or CMake, you -should copy the distributed config.h.generic to config.h, and then edit the -macro definitions to be the way you need them. You must then add --DHAVE_CONFIG_H to all of your compile commands, so that config.h is included -at the start of every source. - -Alternatively, you can avoid editing by using -D on the compiler command line -to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H. - -PCRE uses memmove() if HAVE_MEMMOVE is set to 1; otherwise it uses bcopy() if -HAVE_BCOPY is set to 1. If your system has neither bcopy() nor memmove(), set -them both to 0; an emulation function will be used. */ - -/* By default, the \R escape sequence matches any Unicode line ending - character or sequence of characters. If BSR_ANYCRLF is defined (to any - value), this is changed so that backslash-R matches only CR, LF, or CRLF. - The build-time default can be overridden by the user of PCRE at runtime. */ -/* #undef BSR_ANYCRLF */ - -/* If you are compiling for a system that uses EBCDIC instead of ASCII - character codes, define this macro to any value. You must also edit the - NEWLINE macro below to set a suitable EBCDIC newline, commonly 21 (0x15). - On systems that can use "configure" or CMake to set EBCDIC, NEWLINE is - automatically adjusted. When EBCDIC is set, PCRE assumes that all input - strings are in EBCDIC. If you do not define this macro, PCRE will assume - input strings are ASCII or UTF-8/16/32 Unicode. It is not possible to build - a version of PCRE that supports both EBCDIC and UTF-8/16/32. */ -/* #undef EBCDIC */ - -/* In an EBCDIC environment, define this macro to any value to arrange for the - NL character to be 0x25 instead of the default 0x15. NL plays the role that - LF does in an ASCII/Unicode environment. The value must also be set in the - NEWLINE macro below. On systems that can use "configure" or CMake to set - EBCDIC_NL25, the adjustment of NEWLINE is automatic. */ -/* #undef EBCDIC_NL25 */ - -/* Define to 1 if you have the `bcopy' function. */ -#define HAVE_BCOPY 1 - -/* Define to 1 if you have the <bits/type_traits.h> header file. */ -/* #undef HAVE_BITS_TYPE_TRAITS_H */ - -/* Define to 1 if you have the <bzlib.h> header file. */ -/* #undef HAVE_BZLIB_H */ - -/* Define to 1 if you have the <dirent.h> header file. */ -#define HAVE_DIRENT_H 1 - -/* Define to 1 if you have the <dlfcn.h> header file. */ -#define HAVE_DLFCN_H 1 - -/* Define to 1 if you have the <editline/readline.h> header file. */ -/* #undef HAVE_EDITLINE_READLINE_H */ - -/* Define to 1 if you have the <edit/readline/readline.h> header file. */ -/* #undef HAVE_EDIT_READLINE_READLINE_H */ - -/* Define to 1 if you have the <inttypes.h> header file. */ -#define HAVE_INTTYPES_H 1 - -/* Define to 1 if you have the <limits.h> header file. */ -#define HAVE_LIMITS_H 1 - -/* Define to 1 if the system has the type `long long'. */ -#define HAVE_LONG_LONG 1 - -/* Define to 1 if you have the `memmove' function. */ -#define HAVE_MEMMOVE 1 - -/* Define to 1 if you have the <memory.h> header file. */ -#define HAVE_MEMORY_H 1 - -/* Define if you have POSIX threads libraries and header files. */ -/* #undef HAVE_PTHREAD */ - -/* Have PTHREAD_PRIO_INHERIT. */ -/* #undef HAVE_PTHREAD_PRIO_INHERIT */ - -/* Define to 1 if you have the <readline/history.h> header file. */ -/* #undef HAVE_READLINE_HISTORY_H */ - -/* Define to 1 if you have the <readline/readline.h> header file. */ -/* #undef HAVE_READLINE_READLINE_H */ - -/* Define to 1 if you have the <stdint.h> header file. */ -#define HAVE_STDINT_H 1 - -/* Define to 1 if you have the <stdlib.h> header file. */ -#define HAVE_STDLIB_H 1 - -/* Define to 1 if you have the `strerror' function. */ -#define HAVE_STRERROR 1 - -/* Define to 1 if you have the <string> header file. */ -#define HAVE_STRING 1 - -/* Define to 1 if you have the <strings.h> header file. */ -#define HAVE_STRINGS_H 1 - -/* Define to 1 if you have the <string.h> header file. */ -#define HAVE_STRING_H 1 - -/* Define to 1 if you have `strtoimax'. */ -/* #undef HAVE_STRTOIMAX */ - -/* Define to 1 if you have `strtoll'. */ -/* #undef HAVE_STRTOLL */ - -/* Define to 1 if you have `strtoq'. */ -#define HAVE_STRTOQ 1 - -/* Define to 1 if you have the <sys/stat.h> header file. */ -#define HAVE_SYS_STAT_H 1 - -/* Define to 1 if you have the <sys/types.h> header file. */ -#define HAVE_SYS_TYPES_H 1 - -/* Define to 1 if you have the <type_traits.h> header file. */ -/* #undef HAVE_TYPE_TRAITS_H */ - -/* Define to 1 if you have the <unistd.h> header file. */ -#define HAVE_UNISTD_H 1 - -/* Define to 1 if the system has the type `unsigned long long'. */ -#define HAVE_UNSIGNED_LONG_LONG 1 - -/* Define to 1 or 0, depending whether the compiler supports simple visibility - declarations. */ -#if !defined(__vax__) -#define HAVE_VISIBILITY 1 -#endif - -/* Define to 1 if you have the <windows.h> header file. */ -/* #undef HAVE_WINDOWS_H */ - -/* Define to 1 if you have the <zlib.h> header file. */ -#define HAVE_ZLIB_H 1 - -/* Define to 1 if you have `_strtoi64'. */ -/* #undef HAVE__STRTOI64 */ - -/* The value of LINK_SIZE determines the number of bytes used to store links - as offsets within the compiled regex. The default is 2, which allows for - compiled patterns up to 64K long. This covers the vast majority of cases. - However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows - for longer patterns in extreme cases. */ -#define LINK_SIZE 2 - -/* Define to the sub-directory in which libtool stores uninstalled libraries. - */ -#define LT_OBJDIR ".libs/" - -/* The value of MATCH_LIMIT determines the default number of times the - internal match() function can be called during a single execution of - pcre_exec(). There is a runtime interface for setting a different limit. - The limit exists in order to catch runaway regular expressions that take - for ever to determine that they do not match. The default is set very large - so that it does not accidentally catch legitimate cases. */ -#define MATCH_LIMIT 10000000 - -/* The above limit applies to all calls of match(), whether or not they - increase the recursion depth. In some environments it is desirable to limit - the depth of recursive calls of match() more strictly, in order to restrict - the maximum amount of stack (or heap, if NO_RECURSE is defined) that is - used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of - match(). To have any useful effect, it must be less than the value of - MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is - a runtime method for setting a different limit. */ -#define MATCH_LIMIT_RECURSION MATCH_LIMIT - -/* This limit is parameterized just in case anybody ever wants to change it. - Care must be taken if it is increased, because it guards against integer - overflow caused by enormously large patterns. */ -#define MAX_NAME_COUNT 10000 - -/* This limit is parameterized just in case anybody ever wants to change it. - Care must be taken if it is increased, because it guards against integer - overflow caused by enormously large patterns. */ -#define MAX_NAME_SIZE 32 - -/* The value of NEWLINE determines the default newline character sequence. - PCRE client programs can override this by selecting other values at run - time. In ASCII environments, the value can be 10 (LF), 13 (CR), or 3338 - (CRLF); in EBCDIC environments the value can be 21 or 37 (LF), 13 (CR), or - 3349 or 3365 (CRLF) because there are two alternative codepoints (0x15 and - 0x25) that are used as the NL line terminator that is equivalent to ASCII - LF. In both ASCII and EBCDIC environments the value can also be -1 (ANY), - or -2 (ANYCRLF). */ -#define NEWLINE 10 - -/* Define to 1 if your C compiler doesn't accept -c and -o together. */ -/* #undef NO_MINUS_C_MINUS_O */ - -/* PCRE uses recursive function calls to handle backtracking while matching. - This can sometimes be a problem on systems that have stacks of limited - size. Define NO_RECURSE to any value to get a version that doesn't use - recursion in the match() function; instead it creates its own stack by - steam using pcre_recurse_malloc() to obtain memory from the heap. For more - detail, see the comments and other stuff just above the match() function. - */ -/* #undef NO_RECURSE */ - -/* Name of package */ -#define PACKAGE "pcre" - -/* Define to the address where bug reports for this package should be sent. */ -#define PACKAGE_BUGREPORT "" - -/* Define to the full name of this package. */ -#define PACKAGE_NAME "PCRE" - -/* Define to the full name and version of this package. */ -#define PACKAGE_STRING "PCRE 8.32" - -/* Define to the one symbol short name of this package. */ -#define PACKAGE_TARNAME "pcre" - -/* Define to the home page for this package. */ -#define PACKAGE_URL "" - -/* Define to the version of this package. */ -#define PACKAGE_VERSION "8.32" - -#if !defined(__vax__) -/* to make a symbol visible */ -#define PCRECPP_EXP_DECL extern __attribute__ ((visibility ("default"))) - -/* to make a symbol visible */ -#define PCRECPP_EXP_DEFN __attribute__ ((visibility ("default"))) -#endif - -/* The value of PCREGREP_BUFSIZE determines the size of buffer used by - pcregrep to hold parts of the file it is searching. This is also the - minimum value. The actual amount of memory used by pcregrep is three times - this number, because it allows for the buffering of "before" and "after" - lines. */ -#define PCREGREP_BUFSIZE 20480 - -#if !defined(__vax__) -/* to make a symbol visible */ -#define PCREPOSIX_EXP_DECL extern __attribute__ ((visibility ("default"))) - -/* to make a symbol visible */ -#define PCREPOSIX_EXP_DEFN extern __attribute__ ((visibility ("default"))) - -/* to make a symbol visible */ -#define PCRE_EXP_DATA_DEFN __attribute__ ((visibility ("default"))) - -/* to make a symbol visible */ -#define PCRE_EXP_DECL extern __attribute__ ((visibility ("default"))) - - -/* If you are compiling for a system other than a Unix-like system or - Win32, and it needs some magic to be inserted before the definition - of a function that is exported by the library, define this macro to - contain the relevant magic. If you do not define this macro, a suitable - __declspec value is used for Windows systems; in other environments - "extern" is used for a C compiler and "extern C" for a C++ compiler. - This macro apears at the start of every exported function that is part - of the external API. It does not appear on functions that are "external" - in the C sense, but which are internal to the library. */ -#define PCRE_EXP_DEFN __attribute__ ((visibility ("default"))) -#endif - -/* Define to any value if linking statically (TODO: make nice with Libtool) */ -/* #undef PCRE_STATIC */ - -/* When calling PCRE via the POSIX interface, additional working storage is - required for holding the pointers to capturing substrings because PCRE - requires three integers per substring, whereas the POSIX interface provides - only two. If the number of expected substrings is small, the wrapper - function uses space on the stack, because this is faster than using - malloc() for each call. The threshold above which the stack is no longer - used is defined by POSIX_MALLOC_THRESHOLD. */ -#define POSIX_MALLOC_THRESHOLD 10 - -/* Define to necessary symbol if this constant uses a non-standard name on - your system. */ -/* #undef PTHREAD_CREATE_JOINABLE */ - -/* Define to 1 if you have the ANSI C header files. */ -#define STDC_HEADERS 1 - -/* Define to allow pcretest and pcregrep to be linked with gcov, so that they - are able to generate code coverage reports. */ -/* #undef SUPPORT_GCOV */ - -/* Define to any value to enable support for Just-In-Time compiling. */ -/* #undef SUPPORT_JIT */ - -/* Define to any value to allow pcregrep to be linked with libbz2, so that it - is able to handle .bz2 files. */ -/* #undef SUPPORT_LIBBZ2 */ - -/* Define to any value to allow pcretest to be linked with libedit. */ -/* #undef SUPPORT_LIBEDIT */ - -/* Define to any value to allow pcretest to be linked with libreadline. */ -/* #undef SUPPORT_LIBREADLINE */ - -/* Define to any value to allow pcregrep to be linked with libz, so that it is - able to handle .gz files. */ -/* #undef SUPPORT_LIBZ */ - -/* Define to any value to enable the 16 bit PCRE library. */ -#define SUPPORT_PCRE16 /**/ - -/* Define to any value to enable the 32 bit PCRE library. */ -/* #undef SUPPORT_PCRE32 */ - -/* Define to any value to enable the 8 bit PCRE library. */ -#define SUPPORT_PCRE8 /**/ - -/* Define to any value to enable JIT support in pcregrep. */ -/* #undef SUPPORT_PCREGREP_JIT */ - -/* Define to any value to enable support for Unicode properties. */ -#define SUPPORT_UCP /**/ - -/* Define to any value to enable support for the UTF-8/16/32 Unicode encoding. - This will work even in an EBCDIC environment, but it is incompatible with - the EBCDIC macro. That is, PCRE can support *either* EBCDIC code *or* - ASCII/UTF-8/16/32, but not both at once. */ -#define SUPPORT_UTF /**/ - -/* Valgrind support to find invalid memory reads. */ -/* #undef SUPPORT_VALGRIND */ - -/* Version number of package */ -#define VERSION "8.32" - -/* Define to empty if `const' does not conform to ANSI C. */ -/* #undef const */ - -/* Define to the type of a signed integer type of width exactly 64 bits if - such a type exists and the standard includes do not define it. */ -/* #undef int64_t */ - -/* Define to `unsigned int' if <sys/types.h> does not define. */ -/* #undef size_t */ |