| Age | Commit message (Expand) | Author | Files | Lines |
|---|
| 2009-05-15 | Oops, forgot to add this file, part of the dsrtc DS174x changes. |   miod | 1 | -0/+25 |
| 2009-05-15 | TOD clock support for IOC3 flavours with DS174x chips (which are rebadged | miod | 2 | -98/+218 |
| 2009-05-08 | IP30 Dallas clock runs in non-BCD mode, so make sure to check which mode | miod | 1 | -27/+30 |
| 2009-04-20 | Some recent IOC3 do not have Dallas timekeepers, so perform a few more tests | miod | 1 | -7/+59 |
| 2009-04-19 | Parse and display the part number and the serial number, instead of falsely | miod | 2 | -18/+47 |
| 2009-04-13 | The start of Origin 200 support. Based on some code contributed by pefo@ | miod | 1 | -4/+7 |
| 2009-04-13 | Also match on Uniqueware family 0x91, and correctly report the third byte | miod | 1 | -4/+16 |
| 2009-04-12 | Interrupt support for IOC3 and its subdevices (currently limited to the | miod | 1 | -5/+3 |
| 2009-02-24 | Add support for hardware acceleration to gbe(4). This provides an accelerated |   jsing | 2 | -63/+599 |
| 2008-11-28 | Eliminate the redundant bits of code for MTU and multicast handling |   brad | 1 | -24/+7 |
| 2008-10-15 | Second pass of simple timeout_add -> timeout_add_sec conversions |   blambert | 2 | -9/+9 |
| 2008-10-02 | First step towards cleaning up the Ethernet driver ioctl handling. | brad | 1 | -9/+3 |
| 2008-09-17 | Unbreak com@ioc probing. | jsing | 1 | -3/+3 |
| 2008-09-16 | - remove some unneeded headers |   jasper | 1 | -9/+1 |
| 2008-06-14 | Mask the upper 56 bits of the rx ports when reading them, pckbd_input() will | miod | 1 | -3/+3 |
| 2008-05-01 | Don't forget to bus_space_unmap() after probing for a com chip. | miod | 1 | -1/+2 |
| 2008-04-21 | allow low level audio drivers to specify a default sample format, |   jakemsr | 1 | -2/+3 |
| 2008-04-07 | SGI 1-Wire Number-In-a-Can drivers. These are regular Dallas/Maxim append-only | miod | 6 | -0/+548 |
| 2008-04-07 | Simple com@ioc (with interrupt handling disabled until ioc interrupt code is | miod | 1 | -0/+112 |
| 2008-04-07 | Split clock attachment in two parts: a timecounter attachment (at mainbus), | miod | 1 | -0/+252 |
| 2008-04-07 | Since uncached virtual addresses will depend upon space identifiers on R1xk | miod | 1 | -6/+6 |
| 2008-02-21 | There's no need to print the IRQ now that we have direct configuration. | jsing | 1 | -14/+7 |
| 2008-02-21 | There's no need to print the IRQ now that we have direct configuration. | jsing | 1 | -15/+9 |
| 2008-02-20 | Completely overhault attachment rules on sgi. No more indirect configuration | miod | 6 | -196/+16 |
| 2008-01-21 | Fix boot time interrupt storm on mec(4) by disabling DMA when stopping the | jsing | 1 | -6/+9 |
| 2008-01-20 | Clean up comments. | jsing | 1 | -107/+107 |
| 2007-12-31 | Significantly improve the gbe(4) driver, including: | jsing | 2 | -210/+606 |
| 2007-12-31 | Move wscons_machdep.c to it's rightful location. This brings OpenBSD/sgi | jsing | 1 | -128/+0 |
| 2007-12-27 | power(4) can now make use of the DS1687 register definitions header file. | jsing | 1 | -4/+3 |
| 2007-12-18 | move variable declarations where they belong | jasper | 1 | -5/+5 |
| 2007-12-18 | - powerbutton -> power button | jasper | 1 | -5/+5 |
| 2007-12-18 | add power(4), a driver for the power button found on SGI O2's. | jasper | 1 | -0/+142 |
| 2007-12-14 | Enable console support for SGI O2 workstations. Switch between the serial | jsing | 1 | -7/+25 |
| 2007-12-14 | Add console/cnattach support to mkbc(4). This allows for early attachment | jsing | 2 | -44/+156 |
| 2007-12-14 | Have gbe(4) attach as the console if the graphical console is selected via | jsing | 1 | -14/+11 |
| 2007-11-27 | add rcs id | jasper | 2 | -0/+4 |
| 2007-11-27 | Initial support for the SGI Graphics Back End (GBE) frame buffer found in | jsing | 2 | -0/+641 |
| 2007-11-26 | Fix some style(9) issues. | jsing | 1 | -42/+35 |
| 2007-11-25 | It helps if you initialise timeouts before you try using them... | jsing | 1 | -1/+3 |
| 2007-11-13 | Give wscons_machdep.c half a spanking. This allows wsdisplay to compile on | jsing | 1 | -10/+5 |
| 2007-10-18 | Add support for the Moosehead PS/2 controller as found on SGI O2 workstations. | jsing | 2 | -0/+889 |
| 2007-07-31 | typo fixes from joel@ionix.com.au |   deraadt | 2 | -18/+18 |
| 2007-05-20 | Check for codec presence in match(), and don't attach if none is found. | miod | 1 | -9/+10 |
| 2007-04-26 | Do not invoke arcbios routines from the moment our page tables are set up, | miod | 1 | -8/+3 |
| 2006-06-11 | Ansify. No binary change on amd64 and i386, not yet built on sgi. ok miod@ |   matthieu | 1 | -13/+6 |
| 2006-03-25 | allow bpf(4) to ignore packets based on their direction (inbound or |   djm | 1 | -3/+3 |
| 2005-12-09 | Drop clause 3/4 as per i386 version. |   jsg | 1 | -6/+1 |
| 2005-11-09 | splimp -> splnet | brad | 1 | -2/+2 |
| 2005-04-15 | make sure aligment does not return zero block size |   mickey | 1 | -2/+2 |
| 2005-02-17 | ehternet -> ethernet | miod | 1 | -2/+2 |
