summaryrefslogtreecommitdiffstats
path: root/sys/dev/i2c
AgeCommit message (Expand)AuthorFilesLines
2009-07-10check 4 (instead of merely 2) addr bits for probing sdtemp(4) chips; ok deraadtcnst1-8/+8
2009-07-10fix the complement in the 2's complement patch from yesterday; ok deraadtcnst1-2/+2
2009-07-10support onsemi's cat34ts02 and cat6095; ok deraadtcnst2-3/+8
2009-07-10the temperature value is really a 13-bit 2's complement; ok deraadtcnst1-5/+4
2009-07-10fix the mask for the sign bit and some comment; ok deraadtcnst1-3/+3
2009-05-23Seems I confused Mb and MB and was in too much of a rush when Ijsg1-5/+18
2009-04-22remove a meaningless sensor.desc; ok deraadtcnst1-3/+1
2009-03-14apologize (dlg and claudio, stop snickering)deraadt1-2/+2
2009-02-22Untested FB-DIMM decoding adapted from changes made to NetBSDjsg1-1/+72
2009-02-19Indicate if a thermal sensor is present on ddr3 modules.jsg1-1/+6
2009-02-19Move most of spdmem match logic into the driver and add crc16/ddr3jsg2-18/+201
2009-01-26Unify error message.kettenis2-4/+4
2008-12-12Check for zero'd spd data even if we pass the checksumjsg1-2/+4
2008-11-24remove more logically irrelevant DDR code from the SDR function; ok jsgcnst1-30/+18
2008-11-13add support for ST's chip since documentation is now available atderaadt2-3/+8
2008-11-10remove some dead code and fix a comment; llvm/clang; ok jsgcnst1-16/+4
2008-11-10uninitialised value caused some lmenv(4) fans to never appear sometimes;cnst1-2/+3
2008-11-03support w83627dhg at i2c (as seen on Sun Ultra 24 via dmesg@) ok deraadt@cnst2-2/+6
2008-09-10add support for the PCA9555 device which has 16 instead of 8 pins.reyk1-56/+131
2008-06-09* fix the order of precedence in the divisor bits calculationcnst1-10/+10
2008-05-21Print a specific message for non i2c attachments like macppcjsg1-1/+5
2008-05-01correct attach messagesderaadt1-3/+3
2008-04-23learn about the fansderaadt1-21/+74
2008-04-22* correct the names of the register definescnst1-12/+15
2008-04-22unbreak the ignore_addrs logic (the 'continue' was obviously meant to affectcnst1-2/+4
2008-04-22handle all four temperature sensorsderaadt1-19/+29
2008-04-21correct negative temperatures (if they ever happen); spotted by cnstderaadt1-2/+8
2008-04-21improve register to temperature conversion codederaadt1-5/+3
2008-04-21when iic_exec fails, return 0xff for the read value; ok jsgderaadt1-2/+2
2008-04-21A very very rough start at an adt7462 driverderaadt2-1/+126
2008-04-20two more i2c probe checks. adt has split off or been sold to ONderaadt1-2/+5
2008-04-18detect adm1034deraadt1-5/+7
2008-04-18adm1033 has a rev register to check as wellderaadt1-2/+2
2008-04-18correct sizeof; palmeidaderaadt1-6/+6
2008-04-17make it more apparent that when we are dealing with 16 bit registersderaadt7-32/+32
2008-04-17use sizeof(thing) instead of hard-coding itderaadt3-21/+21
2008-04-16Use ntohs() to swap the raw i2c data to native format; tested by sthenderaadt1-8/+9
2008-04-15Take a shot at LM76 support (13 bit temperature, 0.065 degC per LSB) forderaadt1-16/+14
2008-04-10MCP98242 temp sensor docs found..deraadt2-2/+7
2008-04-09Recognize and support the Microchip MCP9805 JC-42.2 sensor (we hope; I amderaadt2-2/+7
2008-04-09support the NPX SE97 tooderaadt2-3/+8
2008-04-07New sensor driver for JDEC JC-42.4 standard dimm temperature sensorsderaadt2-1/+128
2008-04-07Identify two chips which follow the JDEC JC-42.4 standard dimm temperaturederaadt1-1/+9
2008-04-01toast unused args from a printf call; ok deraadtcnst1-2/+2
2008-04-01match more versions of w83793g; whilst here, also ensure that the bank 0cnst1-4/+5
2008-04-01only need 8 words to learn about i2c spd jc-42.4 sensorsderaadt1-2/+2
2008-03-27test the Vdd registers of Andigilog chips against the minimum voltage readings;cnst1-2/+4
2008-03-23New andl(4) driver for Andigilog aSC7611 Hardware Monitor.cnst2-1/+241
2008-03-19add probe for Andigilog aSC7611; discussed with deraadtcnst1-1/+6
2007-12-122nd two extra fans on the 5027 are encoded differently; diffderaadt1-13/+26
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.