summaryrefslogtreecommitdiffstats
path: root/sys/dev/mii/miidevs (follow)
Commit message (Expand)AuthorAgeFilesLines
* Add Broadcom BCM54210E.kettenis2020-04-141-1/+3
* Add Marvell 88E1545.visa2019-09-241-1/+2
* Add Marvell 88E1512.kettenis2018-04-091-1/+2
* Add MICREL KSZ9021 and KSZ9031.kettenis2016-07-101-1/+6
* The Atheros PHYs with model ID 7 are the AR8031/AR8033/AR8035 family.kettenis2016-07-081-2/+2
* add RTL8211yuo2015-07-191-2/+2
* use the correct capitalization for Realtek.brad2014-11-241-2/+2
* Add an entry for the Broadcom 53115 model found on the DSR-500.pirofti2014-05-061-1/+2
* new Realtek PHY.brad2013-12-141-1/+2
* Add RTL8101E 10/100 PHY.kettenis2013-06-151-1/+2
* fix model ids for Broadcom BCM5720C and BCM5717C phys.dlg2013-01-101-3/+3
* Add BCM5717/19/20C PHYs. From Brad.kettenis2012-08-091-1/+4
* add BCM57765 ID, same diff jsg@ ok kettenis@sthen2011-12-191-1/+2
* Add Atheros F1 and F2 PHYs from FreeBSDkevlo2011-01-211-1/+2
* Add drivers for the RDC R6040 Ethernet chipsetkevlo2011-01-151-1/+5
* Recognize the Marvell PHYG65G Gig PHY; tested by Frans Haarmankevlo2010-11-231-1/+2
* More Broadcom IDs, from Brad:sthen2010-03-261-1/+4
* Add BCM57780, from Brad. ok jsg@ kettenis@sthen2010-02-161-1/+3
* Correct the PHY ID for IC+ IP1001. From Brad, confirmed with the datasheet.sthen2009-09-071-2/+2
* 5464 / 5461 IDs found in the Linux broadcom PHY driver and unknownnaddy2009-08-081-1/+4
* Add BCM5761 PHY, from Brad.sthen2009-07-301-1/+2
* add Cicada CS8244 10/100/1000 PHY, from Brad.sthen2009-07-281-1/+2
* add ids for the new phys on the bcm5709sdlg2009-07-031-1/+3
* add BCM5784, from Brad.sthen2009-05-211-1/+2
* Use tabs between the product id and the product string.brad2008-10-251-124/+124
* Remove vendor names from the product strings.brad2008-10-251-34/+34
* Shorten the vendor names and fix up the names of some of thebrad2008-10-241-57/+57
* Sort the vendors and PHY id's.brad2008-10-241-59/+60
* Add the id for the Atheros F2 PHY.brad2008-09-251-3/+4
* Recognize the Marvell 88E1116R Gig PHY.brad2008-09-091-1/+2
* Add Atheros OUI and Atheros F1 id.brad2008-08-241-1/+5
* BCM5714 also supports fiber interfaces.brad2008-08-241-2/+2
* Add the OUI id for JMicron and the ids for the JMP202 FastE PHY andbrad2008-07-121-1/+6
* First pass at removing clauses 3 and 4 from NetBSD licenses.ray2008-06-261-8/+1
* BCM5780 also has a fiber model.brad2008-06-111-2/+2
* Add the id for the Marvell 88E3016 10/100 PHYbrad2008-04-301-1/+2
* Add the National Semiconductor DP83865 Gigabit PHY.kettenis2008-04-021-1/+2
* Add the Cicada CS8204 quad port PHY.brad2008-04-021-1/+2
* - Update the BCM5706 PHY entry to also mention SX since this id is sharedbrad2008-02-281-2/+3
* add the Broadcom BCM5722 PHY id.brad2008-01-311-1/+2
* Add Enable/Agere LU3X31T2.kettenis2007-11-061-1/+2
* Add Agere ET1011 10/100/1000 PHYjsg2007-10-301-1/+5
* Add another OUI for Broadcom, and add the PHY for the Broadcom BCM5906.kettenis2007-09-171-1/+3
* Intel PHY on D945GCCR boardckuethe2007-08-301-1/+2
* rename Marvell Gig PHY E1000_5/6 to E1116/E1118.brad2006-11-281-6/+6
* add PHY id for the Broadcom BCM5755 ASIC based chipsets.brad2006-10-201-1/+2
* add another OUI id for Broadcom and the BCM5787 PHY id.brad2006-10-151-1/+3
* add a few new Marvell ids.brad2006-10-011-11/+14
* Add another two Vitesse PHYs, one from jmc's nfe(4), one from anjsg2006-09-271-2/+5
* another Marvell Gig PHY.brad2006-08-211-2/+3