summaryrefslogtreecommitdiffstats
path: root/sys/dev
AgeCommit message (Expand)AuthorFilesLines
2015-06-26Completely skip entries for disabled LAPICs so they don't overwriteguenther1-4/+4
2015-06-26Add Linux completion API and use it.kettenis5-34/+65
2015-06-26There is no excuse for using dma_alloc(9) when a bus_dma_tag_t is available.kettenis2-15/+9
2015-06-26Revert previous. uvideo checks the transfered length of every frame andmpi4-11/+21
2015-06-26Adapt to the removal of the symbolic input and output port names frommiod1-6/+5
2015-06-25Cards with revision < 10 (qemu rev is 0), have no ad1848 chip andratchov2-13/+44
2015-06-25Ensure the setup block is DMA reachable.deraadt2-11/+13
2015-06-25Reimplement the audio driver in a simpler way, removing unused/unusableratchov8-3196/+1523
2015-06-24Allow uvideo_mmap_queue() to fail gracefully when the mmap queue is full;miod1-8/+16
2015-06-24#undef HZ before defining it such that compiling a kernel with -DHZ=xxx works.kettenis1-1/+2
2015-06-24Linux jiffies and OpenBSD ticks are the same thing.kettenis6-23/+19
2015-06-24Quirk needed for SuperTop IDE bridge from frantisek holop.mpi1-1/+9
2015-06-24regenmpi2-4/+16
2015-06-24SuperTop IDE bridge from frantisek holop.mpi1-1/+5
2015-06-24Increment if_ipackets in if_input().mpi81-219/+97
2015-06-24Introduce Linux work queue APIs and use them. As a side-effect, this willkettenis9-123/+193
2015-06-22Flush out another small diff to reduce the diffs with Linux.kettenis1-2/+2
2015-06-22Do not update frame lengths to reflect what has really been transferedmpi4-21/+11
2015-06-22Make xhci(4)'s root hub report the same status bits as physical USB3 hubs.mpi3-17/+24
2015-06-22Apparently some BIOSes not supporting xHCI natively switch USB portsmpi1-15/+28
2015-06-21Don't use uninitialized data as a return value.krw1-5/+5
2015-06-21Don't leak mem if wsfont_rotate() fails.jca1-4/+2
2015-06-21memory leak on failure; from Maxime Villardderaadt1-2/+4
2015-06-20Only match devices with a valid configuration.mpi1-22/+4
2015-06-19Only match devices with a valid configuration.uaa2-22/+5
2015-06-19remove isp(4) now that the ql* family have replaced itjmatthew18-18602/+6
2015-06-18For unsupported sample formats, don't return EINVAL but set the closestnaddy1-15/+7
2015-06-18CP2110 is handled by uslhcom not uslcomjsg1-2/+1
2015-06-18Only match devices with a valid configuration.mpi2-23/+5
2015-06-18Only match devices with a valid configuration.mpi1-60/+12
2015-06-18Only match devices with a valid configuration.mpi2-19/+7
2015-06-17when no fingers are down, send 0 for zjcs1-2/+3
2015-06-17fix compilation with UBCMTP_DEBUGjcs1-2/+2
2015-06-17Four new sensors, from David Higgs.mpi2-5/+19
2015-06-16Add a uslcom id for the Netgear M7100 console from Andrew Daugherity.jsg1-1/+43
2015-06-16regenjsg2-7/+273
2015-06-16Add a uslcom id for the Netgear M7100 console from Andrew Daugherity.jsg1-3/+69
2015-06-15Bring back r1.78 and r1.79, now that ajactouto@'s regression hasmpi1-14/+33
2015-06-15Set the length of isochronous transfers as the sum of the frames lengths.mpi3-27/+23
2015-06-15Remove comments referring to Linux iwlwifi source filenames from iwm(4).stsp3-215/+4
2015-06-15Make the wifi LED work with iwm(4).stsp2-3/+69
2015-06-14Implement IQ calibration support for rtwn(4). Lots of black magic involved.stsp2-11/+291
2015-06-13Parse _CST objects and use the C-states they describe when they're sane.guenther2-88/+514
2015-06-13Busy-wait a short while after sending a command to rtwn(4) firmware.stsp1-1/+5
2015-06-12Only match devices with a valid configuration.mpi13-185/+45
2015-06-12Actually trigger iwm_init_task() from iwm_watchdog() as intended to givestsp1-3/+2
2015-06-12Fix rtwn(4) wifi LED support. Tested with rtwn(4) device in Thinkpad X220.stsp2-5/+11
2015-06-11remove uneeded pci includesjsg3-10/+4
2015-06-10Typos: equalivant, fucntion, libary.miod1-2/+2
2015-06-10Don't claim the autri(4) driver supports big-ending, signed 8-bit,ratchov1-32/+6