summaryrefslogtreecommitdiffstats
path: root/sys
AgeCommit message (Expand)AuthorFilesLines
2018-05-16After having finished transmitting the last mbuf, don't just return topatrick1-3/+4
2018-05-16Move the code that decodes the i.MX6 PLLs and PFDs into imxanatop(4)patrick7-216/+271
2018-05-16Add glue for the USB3 controller on the i.MX8MQ SoC.patrick4-3/+74
2018-05-16Fix kernel builds without IPSEC.reyk3-4/+9
2018-05-16Correct order of free(9) in an error case.patrick1-2/+2
2018-05-16libfuse should not maintain state for FBT_READDIR. If a directory ishelg1-2/+2
2018-05-16Correct shortcomings in imxiic(4) that occurred during the initialpatrick1-64/+66
2018-05-16Implement pmap_growkernel(). Bump VM_MAX_KERNEL_ADDRESS now that we nokettenis3-13/+155
2018-05-16Avoid overflow in constraint computation; ok kettenis@ tb@otto1-2/+3
2018-05-16Implement a BCDC control packet mechanism based on the command requestpatrick5-192/+209
2018-05-15Implement Rx of multiple frames per interrupt in the iwm(4) driver.stsp1-64/+117
2018-05-15Use memset(3) instead of bzero(3) for consistency and as per POSIXhelg2-8/+8
2018-05-15Remove a4x bus space hack.kettenis4-183/+4
2018-05-15Remove a4x bus space hack.kettenis5-246/+2
2018-05-15Take NET_LOCK for pppioctl when called via the tty ioctl handlermikeb1-1/+3
2018-05-15Grab the KERNEL_LOCK() in pppasyncstart/pppasyncrelinq/pppasyncctlp.mpi1-1/+7
2018-05-14Add support for register shift/io-width to the console code as well.kettenis4-106/+80
2018-05-14When checking the IPsec enable sysctls, ipsec_common_input() hadbluhm2-27/+45
2018-05-14When walking the IPv6 header chain in IPsec output, check that thebluhm1-2/+10
2018-05-14Relax the way irqs are assigned. This diff does:kettenis11-181/+171
2018-05-14Stopping counting and reporting CPU time spent spinning on a lock asmpi3-15/+21
2018-05-14Expose memory barriers to userland.kettenis1-2/+3
2018-05-14Use a SRP list to protect pfkeyv2 sockets, thus removing the need tompi2-43/+72
2018-05-14Delete unused/obsolete labelsguenther1-5/+2
2018-05-13Fix code which is #ifdef TRAP_SIGDEBUG or DEBUG: wrong variable andguenther1-3/+3
2018-05-13Add support for Elantech trackpoints to pms. Extend the list ofbru2-9/+63
2018-05-13Add bus DMA barriers to ensure the hardware does not see a TRB cycle bitvisa1-5/+19
2018-05-12Cleanup IPsec common input error handling with consistent goto drop.bluhm1-24/+27
2018-05-12Re-apply inadvertantly misplaced r1.127 from kettenis@:krw1-1/+4
2018-05-12Make the code a bit easier on the eye by factoring repeated embeddedtb1-53/+44
2018-05-12Cleanup IPsec IPComp error handling with consistent goto drop.bluhm1-44/+41
2018-05-12Make LACP_STATE_BITS accessible to userlandccardenas1-12/+12
2018-05-11Fix fallout from i386 Meltdown preparation which is using interruptbluhm1-1/+6
2018-05-11Compile the EFI bootloader with -mfloat-abi=soft to prevent the compiler fromkettenis1-1/+2
2018-05-10TCP debug sockets still had code for old TCP timers that werebluhm3-9/+32
2018-05-10pf route-to should not send packets from 127.0.0.1 or ::1 addressbluhm1-3/+5
2018-05-09Cleanup IPsec ESP error handling with consistent goto drop.bluhm1-84/+79
2018-05-09Fix a linking error in the IP26 kernel. This is a regression causedvisa1-1/+3
2018-05-09Avoid locking two vm_pages simultaneously in pmap_enter(). To achievevisa1-71/+58
2018-05-09vm_page lookup does not need locking. Hoist it outside the pmap lock.visa1-3/+3
2018-05-09Cleanup IPsec AH error handling with consistent goto drop.bluhm1-90/+79
2018-05-09Mark `f_ops' as immutable.mpi2-7/+9
2018-05-09Remove witness_channel and always use console outputvisa1-71/+25
2018-05-09Implement stack trace saving on mips64.visa1-1/+100
2018-05-08Historically there were slow and fast tcp timeouts. That is whybluhm6-50/+33
2018-05-08Socket splicing can delay operations by task or timeout. Introducebluhm1-8/+20
2018-05-08Do do include <sys/mount.h> because it breaks some userland programsmpi1-2/+2
2018-05-08Use fd_getfile() in sysctl_file() instead of rewriting it.mpi1-7/+5
2018-05-08Introduce rtm_sendup() a function to deliver routing messages to ampi2-40/+41
2018-05-08Print xHCI revision in dmesg.mpi5-16/+10