diff options
Diffstat (limited to 'Documentation/devicetree/bindings/phy')
99 files changed, 4069 insertions, 1266 deletions
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml index 77606c899fe2..4fff091bd534 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/allwinner,sun4i-a10-usb-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 USB PHY Device Tree Bindings +title: Allwinner A10 USB PHY maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml index 078af52b16ed..f557feca9763 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/allwinner,sun50i-a64-usb-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A64 USB PHY Device Tree Bindings +title: Allwinner A64 USB PHY maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -15,7 +15,9 @@ properties: const: 1 compatible: - const: allwinner,sun50i-a64-usb-phy + enum: + - allwinner,sun20i-d1-usb-phy + - allwinner,sun50i-a64-usb-phy reg: items: diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml index e632140722a2..4480fdedd669 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner H6 USB PHY Device Tree Bindings +title: Allwinner H6 USB PHY maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml index 5bad9b06e2e7..1563e3df3052 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/allwinner,sun5i-a13-usb-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A13 USB PHY Device Tree Bindings +title: Allwinner A13 USB PHY maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml index d0b541a461f3..dfb6a8993535 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-mipi-dphy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A31 MIPI D-PHY Controller Device Tree Bindings +title: Allwinner A31 MIPI D-PHY Controller maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -37,6 +37,18 @@ properties: resets: maxItems: 1 + allwinner,direction: + $ref: '/schemas/types.yaml#/definitions/string' + description: | + Direction of the D-PHY: + - "rx" for receiving (e.g. when used with MIPI CSI-2); + - "tx" for transmitting (e.g. when used with MIPI DSI). + + enum: + - tx + - rx + default: tx + required: - "#phy-cells" - compatible diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml index 922b4665e00d..4897a3d2fbc3 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-usb-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A31 USB PHY Device Tree Bindings +title: Allwinner A31 USB PHY maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml index a94019efc2f3..99de9c6889a0 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/allwinner,sun8i-a23-usb-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A23 USB PHY Device Tree Bindings +title: Allwinner A23 USB PHY maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml index 33f3ddc0492d..73438d84de50 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/allwinner,sun8i-a83t-usb-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A83t USB PHY Device Tree Bindings +title: Allwinner A83t USB PHY maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml index e288450e0844..77539b4601c2 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/allwinner,sun8i-h3-usb-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner H3 USB PHY Device Tree Bindings +title: Allwinner H3 USB PHY maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml index d947e50a49d2..2dd31630c13e 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/allwinner,sun8i-r40-usb-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner R40 USB PHY Device Tree Bindings +title: Allwinner R40 USB PHY maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml index a2836c296cc4..395d33855d48 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/allwinner,sun8i-v3s-usb-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner V3s USB PHY Device Tree Bindings +title: Allwinner V3s USB PHY maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml index 2eb493fa64fd..bd9445f6f130 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/allwinner,sun9i-a80-usb-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A80 USB PHY Device Tree Bindings +title: Allwinner A80 USB PHY maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml index be485f500887..5eddaed3d853 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic AXG MIPI D-PHY maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml new file mode 100644 index 000000000000..7aa0c05d6ce4 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,g12a-mipi-dphy-analog.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic G12A MIPI analog PHY + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +properties: + compatible: + const: amlogic,g12a-mipi-dphy-analog + + "#phy-cells": + const: 0 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + phy@0 { + compatible = "amlogic,g12a-mipi-dphy-analog"; + reg = <0x0 0xc>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml index 4d01f3124e1c..a90fa1baadab 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml @@ -16,7 +16,7 @@ description: |+ - compatible: Should be the following: "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon" - Refer to the the bindings described in + Refer to the bindings described in Documentation/devicetree/bindings/mfd/syscon.yaml properties: diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml index 399ebde45409..f3a5fbabbbb5 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic G12A USB2 PHY maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml index 453c083cf44c..868b4e6fde71 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic G12A USB3 + PCIE Combo PHY maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml new file mode 100644 index 000000000000..1f085cdd1c85 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,meson8-hdmi-tx-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson8, Meson8b and Meson8m2 HDMI TX PHY + +maintainers: + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +description: |+ + The HDMI TX PHY node should be the child of a syscon node with the + required property: + + compatible = "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon" + + Refer to the bindings described in + Documentation/devicetree/bindings/mfd/syscon.yaml + +properties: + $nodename: + pattern: "^hdmi-phy@[0-9a-f]+$" + + compatible: + oneOf: + - items: + - enum: + - amlogic,meson8b-hdmi-tx-phy + - amlogic,meson8m2-hdmi-tx-phy + - const: amlogic,meson8-hdmi-tx-phy + - const: amlogic,meson8-hdmi-tx-phy + + reg: + maxItems: 1 + + clocks: + minItems: 1 + description: + HDMI TMDS clock + + "#phy-cells": + const: 0 + +required: + - compatible + - "#phy-cells" + +additionalProperties: false + +examples: + - | + hdmi-phy@3a0 { + compatible = "amlogic,meson8-hdmi-tx-phy"; + reg = <0x3a0 0xc>; + clocks = <&tmds_clock>; + #phy-cells = <0>; + }; + - | + hdmi-phy@3a0 { + compatible = "amlogic,meson8b-hdmi-tx-phy", "amlogic,meson8-hdmi-tx-phy"; + reg = <0x3a0 0xc>; + clocks = <&tmds_clock>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt deleted file mode 100644 index 10efff28b52b..000000000000 --- a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt +++ /dev/null @@ -1,47 +0,0 @@ -Broadcom Cygnus PCIe PHY - -Required properties: -- compatible: must be "brcm,cygnus-pcie-phy" -- reg: base address and length of the PCIe PHY block -- #address-cells: must be 1 -- #size-cells: must be 0 - -Each PCIe PHY should be represented by a child node - -Required properties For the child node: -- reg: the PHY ID -0 - PCIe RC 0 -1 - PCIe RC 1 -- #phy-cells: must be 0 - -Example: - pcie_phy: phy@301d0a0 { - compatible = "brcm,cygnus-pcie-phy"; - reg = <0x0301d0a0 0x14>; - - pcie0_phy: phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - - pcie1_phy: phy@1 { - reg = <1>; - #phy-cells = <0>; - }; - }; - - /* users of the PCIe phy */ - - pcie0: pcie@18012000 { - ... - ... - phys = <&pcie0_phy>; - phy-names = "pcie-phy"; - }; - - pcie1: pcie@18013000 { - ... - ... - phys = <pcie1_phy>; - phy-names = "pcie-phy"; - }; diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.yaml new file mode 100644 index 000000000000..808e90b2465d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/brcm,cygnus-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Cygnus PCIe PHY + +maintainers: + - Ray Jui <ray.jui@broadcom.com> + - Scott Branden <scott.branden@broadcom.com> + +properties: + $nodename: + pattern: "^pcie[-|_]phy(@.*)?$" + + compatible: + items: + - const: brcm,cygnus-pcie-phy + + reg: + maxItems: 1 + description: > + Base address and length of the PCIe PHY block + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^pcie-phy@[0-9]+$": + type: object + additionalProperties: false + description: > + PCIe PHY child nodes + + properties: + reg: + maxItems: 1 + description: > + The PCIe PHY port number + + "#phy-cells": + const: 0 + + required: + - reg + - "#phy-cells" + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + pcie_phy: pcie_phy@301d0a0 { + compatible = "brcm,cygnus-pcie-phy"; + reg = <0x0301d0a0 0x14>; + #address-cells = <1>; + #size-cells = <0>; + + pcie0_phy: pcie-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + pcie1_phy: pcie-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt b/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt deleted file mode 100644 index 5b51007c6f24..000000000000 --- a/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Broadcom NS2 PCIe PHY binding document - -Required bus properties: -- reg: MDIO Bus number for the MDIO interface -- #address-cells: must be 1 -- #size-cells: must be 0 - -Required PHY properties: -- compatible: should be "brcm,ns2-pcie-phy" -- reg: MDIO Phy ID for the MDIO interface -- #phy-cells: must be 0 - -This is a child bus node of "brcm,mdio-mux-iproc" node. - -Example: - -mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - pci_phy0: pci-phy@0 { - compatible = "brcm,ns2-pcie-phy"; - reg = <0x0>; - #phy-cells = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/phy/brcm,ns2-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,ns2-pcie-phy.yaml new file mode 100644 index 000000000000..70eb48b391c9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,ns2-pcie-phy.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/brcm,ns2-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom NS2 PCIe PHY binding document + +maintainers: + - Ray Jui <ray.jui@broadcom.com> + - Scott Branden <scott.branden@broadcom.com> + +properties: + compatible: + const: brcm,ns2-pcie-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + pci-phy@0 { + compatible = "brcm,ns2-pcie-phy"; + reg = <0x0>; + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml index cb1aa325336f..435b971dfd9b 100644 --- a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml +++ b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml @@ -102,19 +102,17 @@ if: then: properties: reg: - maxItems: 2 + minItems: 2 + reg-names: - items: - - const: "phy" - - const: "phy-ctrl" + minItems: 2 else: properties: reg: maxItems: 1 + reg-names: maxItems: 1 - items: - - const: "phy" required: - compatible diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy-rx.yaml b/Documentation/devicetree/bindings/phy/cdns,dphy-rx.yaml new file mode 100644 index 000000000000..6fdd46ad5a78 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/cdns,dphy-rx.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/cdns,dphy-rx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence DPHY Rx + +maintainers: + - Pratyush Yadav <pratyush@kernel.org> + +properties: + compatible: + items: + - const: cdns,dphy-rx + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + dphy0: phy@4580000 { + compatible = "cdns,dphy-rx"; + reg = <0x4580000 0x1100>; + #phy-cells = <0>; + power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; + }; diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.txt b/Documentation/devicetree/bindings/phy/cdns,dphy.txt deleted file mode 100644 index 1095bc4e72d9..000000000000 --- a/Documentation/devicetree/bindings/phy/cdns,dphy.txt +++ /dev/null @@ -1,20 +0,0 @@ -Cadence DPHY -============ - -Cadence DPHY block. - -Required properties: -- compatible: should be set to "cdns,dphy". -- reg: physical base address and length of the DPHY registers. -- clocks: DPHY reference clocks. -- clock-names: must contain "psm" and "pll_ref". -- #phy-cells: must be set to 0. - -Example: - dphy0: dphy@fd0e0000{ - compatible = "cdns,dphy"; - reg = <0x0 0xfd0e0000 0x0 0x1000>; - clocks = <&psm_clk>, <&pll_ref_clk>; - clock-names = "psm", "pll_ref"; - #phy-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.yaml b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml new file mode 100644 index 000000000000..6cd9b0f388a4 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/cdns,dphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence DPHY + +maintainers: + - Pratyush Yadav <pratyush@kernel.org> + +properties: + compatible: + enum: + - cdns,dphy + - ti,j721e-dphy + + reg: + maxItems: 1 + + clocks: + items: + - description: PMA state machine clock + - description: PLL reference clock + + clock-names: + items: + - const: psm + - const: pll_ref + + "#phy-cells": + const: 0 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + dphy0: phy@fd0e0000{ + compatible = "cdns,dphy"; + reg = <0xfd0e0000 0x1000>; + clocks = <&psm_clk>, <&pll_ref_clk>; + clock-names = "psm", "pll_ref"; + power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml new file mode 100644 index 000000000000..0af765ba2793 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/fsl,imx8-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8 SoC series PCIe PHY + +maintainers: + - Richard Zhu <hongxing.zhu@nxp.com> + +properties: + "#phy-cells": + const: 0 + + compatible: + enum: + - fsl,imx8mm-pcie-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ref + + resets: + maxItems: 1 + + reset-names: + items: + - const: pciephy + + fsl,refclk-pad-mode: + description: | + Specifies the mode of the refclk pad used. It can be UNUSED(PHY + refclock is derived from SoC internal source), INPUT(PHY refclock + is provided externally via the refclk pad) or OUTPUT(PHY refclock + is derived from SoC internal source and provided on the refclk pad). + Refer include/dt-bindings/phy/phy-imx8-pcie.h for the constants + to be used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2 ] + + fsl,tx-deemph-gen1: + description: Gen1 De-emphasis value (optional). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + fsl,tx-deemph-gen2: + description: Gen2 De-emphasis value (optional). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + fsl,clkreq-unsupported: + type: boolean + description: A boolean property indicating the CLKREQ# signal is + not supported in the board design (optional) + +required: + - "#phy-cells" + - compatible + - reg + - clocks + - clock-names + - fsl,refclk-pad-mode + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mm-clock.h> + #include <dt-bindings/phy/phy-imx8-pcie.h> + #include <dt-bindings/reset/imx8mq-reset.h> + + pcie_phy: pcie-phy@32f00000 { + compatible = "fsl,imx8mm-pcie-phy"; + reg = <0x32f00000 0x10000>; + clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; + clock-names = "ref"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; + assigned-clock-rates = <100000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>; + resets = <&src IMX8MQ_RESET_PCIEPHY>; + reset-names = "pciephy"; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + #phy-cells = <0>; + }; +... diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8qm-lvds-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8qm-lvds-phy.yaml new file mode 100644 index 000000000000..8767e48c71a6 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/fsl,imx8qm-lvds-phy.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/fsl,imx8qm-lvds-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mixel LVDS PHY for Freescale i.MX8qm SoC + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + The Mixel LVDS PHY IP block is found on Freescale i.MX8qm SoC. + It converts two groups of four 7/10 bits of CMOS data into two + groups of four data lanes of LVDS data streams. A phase-locked + transmit clock is transmitted in parallel with each group of + data streams over a fifth LVDS link. Every cycle of the transmit + clock, 56/80 bits of input data are sampled and transmitted + through the two groups of LVDS data streams. Together with the + transmit clocks, the two groups of LVDS data streams form two + LVDS channels. + + The Mixel LVDS PHY found on Freescale i.MX8qm SoC is controlled + by Control and Status Registers(CSR) module in the SoC. The CSR + module, as a system controller, contains the PHY's registers. + +properties: + compatible: + enum: + - fsl,imx8qm-lvds-phy + - mixel,28fdsoi-lvds-1250-8ch-tx-pll + + "#phy-cells": + const: 1 + description: | + Cell allows setting the LVDS channel index of the PHY. + Index 0 is for LVDS channel0 and index 1 is for LVDS channel1. + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - "#phy-cells" + - clocks + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/firmware/imx/rsrc.h> + phy { + compatible = "fsl,imx8qm-lvds-phy"; + #phy-cells = <1>; + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>; + power-domains = <&pd IMX_SC_R_LVDS_0>; + }; diff --git a/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml b/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml new file mode 100644 index 000000000000..4d91e2f4f247 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/fsl,lynx-28g.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Lynx 28G SerDes PHY binding + +maintainers: + - Ioana Ciornei <ioana.ciornei@nxp.com> + +properties: + compatible: + enum: + - fsl,lynx-28g + + reg: + maxItems: 1 + + "#phy-cells": + const: 1 + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + serdes_1: phy@1ea0000 { + compatible = "fsl,lynx-28g"; + reg = <0x0 0x1ea0000 0x0 0x1e30>; + #phy-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml index c2e073e26190..20b79e2e8b82 100644 --- a/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml +++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml @@ -41,20 +41,10 @@ additionalProperties: false examples: - | - bus { - #address-cells = <2>; - #size-cells = <2>; - - usb3_otg_bc: usb3_otg_bc@ff200000 { - compatible = "syscon", "simple-mfd"; - reg = <0x0 0xff200000 0x0 0x1000>; - - usb-phy { - compatible = "hisilicon,hi3660-usb-phy"; - #phy-cells = <0>; - hisilicon,pericrg-syscon = <&crg_ctrl>; - hisilicon,pctrl-syscon = <&pctrl>; - hisilicon,eye-diagram-param = <0x22466e4>; - }; - }; + usb-phy { + compatible = "hisilicon,hi3660-usb-phy"; + #phy-cells = <0>; + hisilicon,pericrg-syscon = <&crg_ctrl>; + hisilicon,pctrl-syscon = <&pctrl>; + hisilicon,eye-diagram-param = <0x22466e4>; }; diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml index ebd78acfe2de..1cb00dbcd4c5 100644 --- a/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml +++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml @@ -52,22 +52,12 @@ additionalProperties: false examples: - | - bus { - #address-cells = <2>; - #size-cells = <2>; - - usb3_otg_bc: usb3_otg_bc@ff200000 { - compatible = "syscon", "simple-mfd"; - reg = <0x0 0xff200000 0x0 0x1000>; - - usb_phy { - compatible = "hisilicon,hi3670-usb-phy"; - #phy-cells = <0>; - hisilicon,pericrg-syscon = <&crg_ctrl>; - hisilicon,pctrl-syscon = <&pctrl>; - hisilicon,sctrl-syscon = <&sctrl>; - hisilicon,eye-diagram-param = <0xfdfee4>; - hisilicon,tx-vboost-lvl = <0x5>; - }; - }; + usb-phy { + compatible = "hisilicon,hi3670-usb-phy"; + #phy-cells = <0>; + hisilicon,pericrg-syscon = <&crg_ctrl>; + hisilicon,pctrl-syscon = <&pctrl>; + hisilicon,sctrl-syscon = <&sctrl>; + hisilicon,eye-diagram-param = <0xfdfee4>; + hisilicon,tx-vboost-lvl = <0x5>; }; diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml index 347d0cdfb80d..5d54b0a0e873 100644 --- a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml +++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml @@ -47,10 +47,18 @@ properties: intel,syscfg: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to Chip configuration registers + - description: ComboPhy instance id description: Chip configuration registers handle and ComboPhy instance id intel,hsio: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to HSIO registers + - description: ComboPhy instance id description: HSIO registers handle and ComboPhy instance id on NOC intel,aggregation: diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml index 954e67571dfd..ca818f83579b 100644 --- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/intel,lgm-emmc-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Intel Lightning Mountain(LGM) eMMC PHY Device Tree Bindings +title: Intel Lightning Mountain(LGM) eMMC PHY maintainers: - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml index ce62c0b94daf..653a12286637 100644 --- a/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/intel,lgm-usb-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Intel LGM USB PHY Device Tree Bindings +title: Intel LGM USB PHY maintainers: - Vadivel Murugan Ramuthevar <vadivel.muruganx.ramuthevar@linux.intel.com> diff --git a/Documentation/devicetree/bindings/phy/intel,phy-thunderbay-emmc.yaml b/Documentation/devicetree/bindings/phy/intel,phy-thunderbay-emmc.yaml new file mode 100644 index 000000000000..34bdb5c4cae8 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/intel,phy-thunderbay-emmc.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/intel,phy-thunderbay-emmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Thunder Bay eMMC PHY bindings + +maintainers: + - Srikandan Nandhini <nandhini.srikandan@intel.com> + +properties: + compatible: + const: intel,thunderbay-emmc-phy + + "#phy-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: emmcclk + +required: + - "#phy-cells" + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + mmc_phy@80440800 { + #phy-cells = <0x0>; + compatible = "intel,thunderbay-emmc-phy"; + status = "okay"; + reg = <0x80440800 0x100>; + clocks = <&emmc>; + clock-names = "emmcclk"; + }; diff --git a/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml index a97482179cf5..711de06bb0fc 100644 --- a/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/lantiq,vrx200-pcie-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Lantiq VRX200 and ARX300 PCIe PHY Device Tree Bindings +title: Lantiq VRX200 and ARX300 PCIe PHY maintainers: - Martin Blumenstingl <martin.blumenstingl@googlemail.com> diff --git a/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml index 2437c3683326..632d61c07f40 100644 --- a/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml +++ b/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml @@ -45,7 +45,7 @@ additionalProperties: false examples: - | usb2_utmi_host_phy: phy@5f000 { - compatible = "marvell,armada-3700-utmi-host-phy"; + compatible = "marvell,a3700-utmi-host-phy"; reg = <0x5f000 0x800>; marvell,usb-misc-reg = <&usb2_syscon>; #phy-cells = <0>; diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml index 6e4d795f9b02..9c2a7345955d 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml @@ -24,6 +24,10 @@ properties: - enum: - mediatek,mt7623-mipi-tx - const: mediatek,mt2701-mipi-tx + - items: + - enum: + - mediatek,mt8365-mipi-tx + - const: mediatek,mt8183-mipi-tx - const: mediatek,mt2701-mipi-tx - const: mediatek,mt8173-mipi-tx - const: mediatek,mt8183-mipi-tx diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml index 29d4123323c2..c2f4cb0b254a 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml @@ -4,7 +4,7 @@ $id: "http://devicetree.org/schemas/phy/mediatek,mt7621-pci-phy.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" -title: Mediatek Mt7621 PCIe PHY Device Tree Bindings +title: Mediatek Mt7621 PCIe PHY maintainers: - Sergio Paracuellos <sergio.paracuellos@gmail.com> diff --git a/Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml new file mode 100644 index 000000000000..422750cc4121 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek PCIe PHY + +maintainers: + - Jianjun Wang <jianjun.wang@mediatek.com> + +description: | + The PCIe PHY supports physical layer functionality for PCIe Gen3 port. + +properties: + compatible: + const: mediatek,mt8195-pcie-phy + + reg: + maxItems: 1 + + reg-names: + items: + - const: sif + + "#phy-cells": + const: 0 + + nvmem-cells: + maxItems: 7 + description: + Phandles to nvmem cell that contains the efuse data, if unspecified, + default value is used. + + nvmem-cell-names: + items: + - const: glb_intr + - const: tx_ln0_pmos + - const: tx_ln0_nmos + - const: rx_ln0 + - const: tx_ln1_pmos + - const: tx_ln1_nmos + - const: rx_ln1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + phy@11e80000 { + compatible = "mediatek,mt8195-pcie-phy"; + #phy-cells = <0>; + reg = <0x11e80000 0x10000>; + reg-names = "sif"; + nvmem-cells = <&pciephy_glb_intr>, + <&pciephy_tx_ln0_pmos>, + <&pciephy_tx_ln0_nmos>, + <&pciephy_rx_ln0>, + <&pciephy_tx_ln1_pmos>, + <&pciephy_tx_ln1_nmos>, + <&pciephy_rx_ln1>; + nvmem-cell-names = "glb_intr", "tx_ln0_pmos", + "tx_ln0_nmos", "rx_ln0", + "tx_ln1_pmos", "tx_ln1_nmos", + "rx_ln1"; + power-domains = <&spm 2>; + }; diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index 9e6c0f43f1c6..5613cc5106e3 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -5,7 +5,7 @@ $id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: MediaTek T-PHY Controller Device Tree Bindings +title: MediaTek T-PHY Controller maintainers: - Chunfeng Yun <chunfeng.yun@mediatek.com> @@ -80,9 +80,13 @@ properties: - mediatek,mt2712-tphy - mediatek,mt7629-tphy - mediatek,mt8183-tphy + - mediatek,mt8186-tphy + - mediatek,mt8192-tphy + - mediatek,mt8365-tphy - const: mediatek,generic-tphy-v2 - items: - enum: + - mediatek,mt8188-tphy - mediatek,mt8195-tphy - const: mediatek,generic-tphy-v3 - const: mediatek,mt2701-u3phy @@ -159,6 +163,25 @@ patternProperties: - PHY_TYPE_USB3 - PHY_TYPE_PCIE - PHY_TYPE_SATA + - PHY_TYPE_SGMII + + nvmem-cells: + items: + - description: internal R efuse for U2 PHY or U3/PCIe PHY + - description: rx_imp_sel efuse for U3/PCIe PHY + - description: tx_imp_sel efuse for U3/PCIe PHY + description: | + Phandles to nvmem cell that contains the efuse data; + Available only for U2 PHY or U3/PCIe PHY of version 2/3, these + three items should be provided at the same time for U3/PCIe PHY, + when use software to load efuse; + If unspecified, will use hardware auto-load efuse. + + nvmem-cell-names: + items: + - const: intr + - const: rx_imp + - const: tx_imp # The following optional vendor properties are only for debug or HQA test mediatek,eye-src: @@ -196,6 +219,16 @@ patternProperties: minimum: 1 maximum: 15 + mediatek,pre-emphasis: + description: + The level of pre-emphasis which used to widen the eye opening and + boost eye swing, the unit step is about 4.16% increment; e.g. the + level 1 means amplitude increases about 4.16%, the level 2 is about + 8.3% etc. (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 3 + mediatek,bc12: description: Specify the flag to enable BC1.2 if support it diff --git a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml index 598fd2b95c29..a9e3139fd421 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml @@ -5,7 +5,7 @@ $id: http://devicetree.org/schemas/phy/mediatek,xsphy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: MediaTek XS-PHY Controller Device Tree Bindings +title: MediaTek XS-PHY Controller maintainers: - Chunfeng Yun <chunfeng.yun@mediatek.com> diff --git a/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml b/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml new file mode 100644 index 000000000000..6e914fbbac56 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/microchip,lan966x-serdes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Lan966x Serdes controller + +maintainers: + - Horatiu Vultur <horatiu.vultur@microchip.com> + +description: | + Lan966x has 7 interfaces, consisting of 2 copper transceivers(CU), + 3 SERDES6G and 2 RGMII interfaces. Two of the SERDES6G support QSGMII. + Also it has 8 logical Ethernet ports which can be connected to these + interfaces. The Serdes controller will allow to configure these interfaces + and allows to "mux" the interfaces to different ports. + + For simple selection of the interface that is used with a port, the + following macros are defined CU(X), SERDES6G(X), RGMII(X). Where X is a + number that represents the index of that interface type. For example + CU(1) means use interface copper transceivers 1. SERDES6G(2) means use + interface SerDes 2. + +properties: + $nodename: + pattern: "^serdes@[0-9a-f]+$" + + compatible: + const: microchip,lan966x-serdes + + reg: + items: + - description: HSIO registers + - description: HW_STAT register + + '#phy-cells': + const: 2 + description: | + - Input port to use for a given macro. + - The macro to be used. The macros are defined in + dt-bindings/phy/phy-lan966x-serdes. + +required: + - compatible + - reg + - '#phy-cells' + +additionalProperties: false + +examples: + - | + serdes: serdes@e2004010 { + compatible = "microchip,lan966x-serdes"; + reg = <0xe202c000 0x9c>, <0xe2004010 0x4>; + #phy-cells = <2>; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt deleted file mode 100644 index 9b23407233c0..000000000000 --- a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt +++ /dev/null @@ -1,29 +0,0 @@ -Mixel DSI PHY for i.MX8 - -The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the -MIPI-DSI IP from Northwest Logic). It represents the physical layer for the -electrical signals for DSI. - -Required properties: -- compatible: Must be: - - "fsl,imx8mq-mipi-dphy" -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Must contain the following entries: - - "phy_ref": phandle and specifier referring to the DPHY ref clock -- reg: the register range of the PHY controller -- #phy-cells: number of cells in PHY, as defined in - Documentation/devicetree/bindings/phy/phy-bindings.txt - this must be <0> - -Optional properties: -- power-domains: phandle to power domain - -Example: - dphy: dphy@30a0030 { - compatible = "fsl,imx8mq-mipi-dphy"; - clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; - clock-names = "phy_ref"; - reg = <0x30a00300 0x100>; - power-domains = <&pd_mipi0>; - #phy-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml new file mode 100644 index 000000000000..786cfd71cb7e --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mixel,mipi-dsi-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mixel DSI PHY for i.MX8 + +maintainers: + - Guido Günther <agx@sigxcpu.org> + +description: | + The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the + MIPI-DSI IP from Northwest Logic). It represents the physical layer for the + electrical signals for DSI. + + The Mixel PHY IP block found on i.MX8qxp is a combo PHY that can work + in either MIPI-DSI PHY mode or LVDS PHY mode. + +properties: + compatible: + enum: + - fsl,imx8mq-mipi-dphy + - fsl,imx8qxp-mipi-dphy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: phy_ref + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + assigned-clock-rates: + maxItems: 1 + + "#phy-cells": + const: 0 + + fsl,syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + A phandle which points to Control and Status Registers(CSR) module. + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#phy-cells" + - power-domains + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8mq-mipi-dphy + then: + properties: + fsl,syscon: false + + required: + - assigned-clocks + - assigned-clock-parents + - assigned-clock-rates + + - if: + properties: + compatible: + contains: + const: fsl,imx8qxp-mipi-dphy + then: + properties: + assigned-clocks: false + assigned-clock-parents: false + assigned-clock-rates: false + + required: + - fsl,syscon + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + dphy: dphy@30a0030 { + compatible = "fsl,imx8mq-mipi-dphy"; + reg = <0x30a00300 0x100>; + clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; + clock-names = "phy_ref"; + assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; + assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>; + assigned-clock-rates = <24000000>; + #phy-cells = <0>; + power-domains = <&pgc_mipi>; + }; diff --git a/Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml b/Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml new file mode 100644 index 000000000000..3169b873231e --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mscc,vsc7514-serdes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsemi Ocelot SerDes muxing + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - UNGLinuxDriver@microchip.com + +description: | + On Microsemi Ocelot, there is a handful of registers in HSIO address + space for setting up the SerDes to switch port muxing. + + A SerDes X can be "muxed" to work with switch port Y or Z for example. + One specific SerDes can also be used as a PCIe interface. + + Hence, a SerDes represents an interface, be it an Ethernet or a PCIe one. + + There are two kinds of SerDes: SERDES1G supports 10/100Mbps in + half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports + 10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode. + + Also, SERDES6G number (aka "macro") 0 is the only interface supporting + QSGMII. + + This is a child of the HSIO syscon ("mscc,ocelot-hsio", see + Documentation/devicetree/bindings/mips/mscc.txt) on the Microsemi Ocelot. + +properties: + compatible: + enum: + - mscc,vsc7514-serdes + + "#phy-cells": + const: 2 + description: | + The first number defines the input port to use for a given SerDes macro. + The second defines the macro to use. They are defined in + dt-bindings/phy/phy-ocelot-serdes.h + +required: + - compatible + - "#phy-cells" + +additionalProperties: + false + +examples: + - | + serdes: serdes { + compatible = "mscc,vsc7514-serdes"; + #phy-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt index c9f5c0caf8a9..70c813b0755f 100644 --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt @@ -8,16 +8,17 @@ Required properties: * "fsl,vf610-usbphy" for Vybrid vf610 * "fsl,imx6sx-usbphy" for imx6sx * "fsl,imx7ulp-usbphy" for imx7ulp + * "fsl,imx8dxl-usbphy" for imx8dxl "fsl,imx23-usbphy" is still a fallback for other strings - reg: Should contain registers location and length - interrupts: Should contain phy interrupt - fsl,anatop: phandle for anatop register, it is only for imx6 SoC series Optional properties: -- fsl,tx-cal-45-dn-ohms: Integer [30-55]. Resistance (in ohms) of switchable +- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable high-speed trimming resistor connected in parallel with the 45 ohm resistor that terminates the DN output signal. Default: 45 -- fsl,tx-cal-45-dp-ohms: Integer [30-55]. Resistance (in ohms) of switchable +- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable high-speed trimming resistor connected in parallel with the 45 ohm resistor that terminates the DP output signal. Default: 45 - fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml index dfde0eaf66e1..d61585c96e31 100644 --- a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml @@ -275,17 +275,17 @@ allOf: - nvidia,hssquelch-level - nvidia,hsdiscon-level - else: - properties: - clocks: - maxItems: 4 + else: + properties: + clocks: + maxItems: 4 - clock-names: - items: - - const: reg - - const: pll_u - - const: timer - - const: utmi-pads + clock-names: + items: + - const: reg + - const: pll_u + - const: timer + - const: utmi-pads - if: properties: diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml index e71b32c9c0d1..a9e227d8b076 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml @@ -113,6 +113,15 @@ patternProperties: minimum: 1 maximum: 16 + cdns,ssc-mode: + description: + Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC, + EXTERNAL_SSC or INTERNAL_SSC. + Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 1 + required: - reg - resets diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml index bd9ae11c9994..2fec9e54ad0e 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -202,7 +202,7 @@ examples: #phy-cells = <0>; cdns,phy-type = <PHY_TYPE_PCIE>; cdns,num-lanes = <2>; - cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>; + cdns,ssc-mode = <CDNS_SERDES_NO_SSC>; }; phy@2 { @@ -211,7 +211,7 @@ examples: #phy-cells = <0>; cdns,phy-type = <PHY_TYPE_SGMII>; cdns,num-lanes = <1>; - cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>; + cdns,ssc-mode = <CDNS_SERDES_NO_SSC>; }; }; }; diff --git a/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt b/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt deleted file mode 100644 index 332219860187..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt +++ /dev/null @@ -1,43 +0,0 @@ -Microsemi Ocelot SerDes muxing driver -------------------------------------- - -On Microsemi Ocelot, there is a handful of registers in HSIO address -space for setting up the SerDes to switch port muxing. - -A SerDes X can be "muxed" to work with switch port Y or Z for example. -One specific SerDes can also be used as a PCIe interface. - -Hence, a SerDes represents an interface, be it an Ethernet or a PCIe one. - -There are two kinds of SerDes: SERDES1G supports 10/100Mbps in -half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports -10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode. - -Also, SERDES6G number (aka "macro") 0 is the only interface supporting -QSGMII. - -This is a child of the HSIO syscon ("mscc,ocelot-hsio", see -Documentation/devicetree/bindings/mips/mscc.txt) on the Microsemi Ocelot. - -Required properties: - -- compatible: should be "mscc,vsc7514-serdes" -- #phy-cells : from the generic phy bindings, must be 2. - The first number defines the input port to use for a given - SerDes macro. The second defines the macro to use. They are - defined in dt-bindings/phy/phy-ocelot-serdes.h - -Example: - - serdes: serdes { - compatible = "mscc,vsc7514-serdes"; - #phy-cells = <2>; - }; - - ethernet { - port1 { - phy-handle = <&phy_foo>; - /* Link SERDES1G_5 to port1 */ - phys = <&serdes 1 SERDES1G_5>; - }; - }; diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml index 5bebd86bf8b6..f71920082fa3 100644 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml @@ -13,11 +13,13 @@ properties: compatible: enum: - rockchip,px30-usb2phy + - rockchip,rk3128-usb2phy - rockchip,rk3228-usb2phy - rockchip,rk3308-usb2phy - rockchip,rk3328-usb2phy - rockchip,rk3366-usb2phy - rockchip,rk3399-usb2phy + - rockchip,rk3568-usb2phy - rockchip,rv1108-usb2phy reg: @@ -50,6 +52,10 @@ properties: description: Phandle to the extcon device providing the cable state for the otg phy. + interrupts: + description: Muxed interrupt for both ports + maxItems: 1 + rockchip,usbgrf: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -67,6 +73,7 @@ properties: interrupts: description: host linestate interrupt + maxItems: 1 interrupt-names: const: linestate @@ -78,8 +85,6 @@ properties: required: - "#phy-cells" - - interrupts - - interrupt-names otg-port: type: object @@ -109,8 +114,6 @@ properties: required: - "#phy-cells" - - interrupts - - interrupt-names required: - compatible @@ -120,6 +123,40 @@ required: - host-port - otg-port +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,rk3568-usb2phy + + then: + properties: + host-port: + properties: + interrupts: false + + otg-port: + properties: + interrupts: false + + required: + - interrupts + + else: + properties: + interrupts: false + + host-port: + required: + - interrupts + - interrupt-names + + otg-port: + required: + - interrupts + - interrupt-names + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml new file mode 100644 index 000000000000..8d8698412de0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/phy-rockchip-naneng-combphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SoC Naneng Combo Phy + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,rk3568-naneng-combphy + + reg: + maxItems: 1 + + clocks: + items: + - description: reference clock + - description: apb clock + - description: pipe clock + + clock-names: + items: + - const: ref + - const: apb + - const: pipe + + resets: + items: + - description: exclusive PHY reset line + + rockchip,enable-ssc: + type: boolean + description: + The option SSC can be enabled for U3, SATA and PCIE. + Most commercially available platforms use SSC to reduce EMI. + + rockchip,ext-refclk: + type: boolean + description: + Many PCIe connections, especially backplane connections, + require a synchronous reference clock between the two link partners. + To achieve this a common clock source, referred to as REFCLK in + the PCI Express Card Electromechanical Specification, + should be used by both ends of the PCIe link. + In PCIe mode one can choose to use an internal or an external reference + clock. + By default the internal clock is selected. The PCIe PHY provides a 100MHz + differential clock output(optional with SSC) for system applications. + When selecting this option an externally 100MHz differential + reference clock needs to be provided to the PCIe PHY. + + rockchip,pipe-grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Some additional phy settings are accessed through GRF regs. + + rockchip,pipe-phy-grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Some additional pipe settings are accessed through GRF regs. + + "#phy-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - rockchip,pipe-grf + - rockchip,pipe-phy-grf + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3568-cru.h> + + pipegrf: syscon@fdc50000 { + compatible = "rockchip,rk3568-pipe-grf", "syscon"; + reg = <0xfdc50000 0x1000>; + }; + + pipe_phy_grf0: syscon@fdc70000 { + compatible = "rockchip,rk3568-pipe-phy-grf", "syscon"; + reg = <0xfdc70000 0x1000>; + }; + + combphy0: phy@fe820000 { + compatible = "rockchip,rk3568-naneng-combphy"; + reg = <0xfe820000 0x100>; + clocks = <&pmucru CLK_PCIEPHY0_REF>, + <&cru PCLK_PIPEPHY0>, + <&cru PCLK_PIPE>; + clock-names = "ref", "apb", "pipe"; + assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>; + assigned-clock-rates = <100000000>; + resets = <&cru SRST_PIPEPHY0>; + rockchip,pipe-grf = <&pipegrf>; + rockchip,pipe-phy-grf = <&pipe_phy_grf0>; + #phy-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt index de6a706abcdb..35f03df00130 100644 --- a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt +++ b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt @@ -9,7 +9,7 @@ Required properties: - resets : list of phandle and reset specifier pairs. There should be two entries, one for the whole phy and one for the port - reset-names : list of reset signal names. Should be "global" and "port" -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt Example: diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml index 267b695215b6..801993813b18 100644 --- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml +++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml @@ -76,8 +76,9 @@ patternProperties: connector: type: object - allOf: - - $ref: ../connector/usb-connector.yaml + $ref: /schemas/connector/usb-connector.yaml + unevaluatedProperties: false + properties: vbus-supply: true diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt deleted file mode 100644 index d23ff90baad5..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt +++ /dev/null @@ -1,28 +0,0 @@ -NVIDIA Tegra194 P2U binding - -Tegra194 has two PHY bricks namely HSIO (High Speed IO) and NVHS (NVIDIA High -Speed) each interfacing with 12 and 8 P2U instances respectively. -A P2U instance is a glue logic between Synopsys DesignWare Core PCIe IP's PIPE -interface and PHY of HSIO/NVHS bricks. Each P2U instance represents one PCIe -lane. - -Required properties: -- compatible: For Tegra19x, must contain "nvidia,tegra194-p2u". -- reg: Should be the physical address space and length of respective each P2U - instance. -- reg-names: Must include the entry "ctl". - -Required properties for PHY port node: -- #phy-cells: Defined by generic PHY bindings. Must be 0. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - -p2u_hsio_0: phy@3e10000 { - compatible = "nvidia,tegra194-p2u"; - reg = <0x03e10000 0x10000>; - reg-names = "ctl"; - - #phy-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml new file mode 100644 index 000000000000..4dc5205d893b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/phy-tegra194-p2u.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: NVIDIA Tegra194 & Tegra234 P2U binding + +maintainers: + - Thierry Reding <treding@nvidia.com> + +description: > + Tegra194 has two PHY bricks namely HSIO (High Speed IO) and NVHS (NVIDIA High + Speed) each interfacing with 12 and 8 P2U instances respectively. + Tegra234 has three PHY bricks namely HSIO, NVHS and GBE (Gigabit Ethernet) + each interfacing with 8, 8 and 8 P2U instances respectively. + A P2U instance is a glue logic between Synopsys DesignWare Core PCIe IP's PIPE + interface and PHY of HSIO/NVHS/GBE bricks. Each P2U instance represents one + PCIe lane. + +properties: + compatible: + enum: + - nvidia,tegra194-p2u + - nvidia,tegra234-p2u + + reg: + maxItems: 1 + description: Should be the physical address space and length of respective each P2U instance. + + reg-names: + items: + - const: ctl + + nvidia,skip-sz-protect-en: + description: Should be present if two PCIe retimers are present between + the root port and its immediate downstream device. + type: boolean + + '#phy-cells': + const: 0 + +additionalProperties: false + +examples: + - | + p2u_hsio_0: phy@3e10000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e10000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml new file mode 100644 index 000000000000..1e104ae76ee6 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,edp-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm eDP PHY + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + The Qualcomm eDP PHY is found in a number of Qualcomm platform and provides + the physical interface for Embedded Display Port. + +properties: + compatible: + enum: + - qcom,sc7280-edp-phy + - qcom,sc8180x-edp-phy + - qcom,sc8280xp-dp-phy + - qcom,sc8280xp-edp-phy + + reg: + items: + - description: PHY base register block + - description: tx0 register block + - description: tx1 register block + - description: PLL register block + + clocks: + maxItems: 2 + + clock-names: + items: + - const: aux + - const: cfg_ahb + + "#clock-cells": + const: 1 + + "#phy-cells": + const: 0 + + vdda-phy-supply: true + vdda-pll-supply: true + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + - "#phy-cells" + +additionalProperties: false + +examples: + - | + phy@aec2a00 { + compatible = "qcom,sc8180x-edp-phy"; + reg = <0x0aec2a00 0x1c0>, + <0x0aec2200 0xa0>, + <0x0aec2600 0xa0>, + <0x0aec2000 0x19c>; + + clocks = <&dispcc 0>, <&dispcc 1>; + clock-names = "aux", "cfg_ahb"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vdda-phy-supply = <&vdd_a_edp_0_1p2>; + vdda-pll-supply = <&vdd_a_edp_0_0p9>; + }; +... diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml new file mode 100644 index 000000000000..fdb277edebeb --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/phy/qcom,hdmi-phy-other.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Adreno/Snapdragon HDMI phy + +maintainers: + - Rob Clark <robdclark@gmail.com> + +properties: + compatible: + enum: + - qcom,hdmi-phy-8660 + - qcom,hdmi-phy-8960 + - qcom,hdmi-phy-8974 + - qcom,hdmi-phy-8084 + + reg: + maxItems: 2 + + reg-names: + items: + - const: hdmi_phy + - const: hdmi_pll + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + + power-domains: + maxItems: 1 + + core-vdda-supply: + description: phandle to VDDA supply regulator + + vddio-supply: + description: phandle to VDD I/O supply regulator + + '#phy-cells': + const: 0 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,hdmi-phy-8660 + - qcom,hdmi-phy-8960 + then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: slave_iface + vddio-supply: false + + - if: + properties: + compatible: + contains: + enum: + - qcom,hdmi-phy-8084 + - qcom,hdmi-phy-8974 + then: + properties: + clocks: + maxItems: 2 + clock-names: + items: + - const: iface + - const: alt_iface + +required: + - compatible + - clocks + - reg + - reg-names + - '#phy-cells' + +additionalProperties: false + +examples: + - | + hdmi_phy: phy@4a00400 { + compatible = "qcom,hdmi-phy-8960"; + reg-names = "hdmi_phy", + "hdmi_pll"; + reg = <0x4a00400 0x60>, + <0x4a00500 0x100>; + #phy-cells = <0>; + power-domains = <&mmcc 1>; + clock-names = "slave_iface"; + clocks = <&clk 21>; + core-vdda-supply = <&pm8921_hdmi_mvs>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml new file mode 100644 index 000000000000..83fe4b39b56f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/phy/qcom,hdmi-phy-qmp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Adreno/Snapdragon QMP HDMI phy + +maintainers: + - Rob Clark <robdclark@gmail.com> + +properties: + compatible: + enum: + - qcom,hdmi-phy-8996 + + reg: + maxItems: 6 + + reg-names: + items: + - const: hdmi_pll + - const: hdmi_tx_l0 + - const: hdmi_tx_l1 + - const: hdmi_tx_l2 + - const: hdmi_tx_l3 + - const: hdmi_phy + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + minItems: 2 + items: + - const: iface + - const: ref + - const: xo + + power-domains: + maxItems: 1 + + vcca-supply: + description: phandle to VCCA supply regulator + + vddio-supply: + description: phandle to VDD I/O supply regulator + + '#clock-cells': + const: 0 + + '#phy-cells': + const: 0 + +required: + - compatible + - clocks + - clock-names + - reg + - reg-names + - '#phy-cells' + +additionalProperties: false + +examples: + - | + hdmi-phy@9a0600 { + compatible = "qcom,hdmi-phy-8996"; + reg = <0x009a0600 0x1c4>, + <0x009a0a00 0x124>, + <0x009a0c00 0x124>, + <0x009a0e00 0x124>, + <0x009a1000 0x124>, + <0x009a1200 0x0c8>; + reg-names = "hdmi_pll", + "hdmi_tx_l0", + "hdmi_tx_l1", + "hdmi_tx_l2", + "hdmi_tx_l3", + "hdmi_phy"; + + clocks = <&mmcc 116>, + <&gcc 214>, + <&xo_board>; + clock-names = "iface", + "ref", + "xo"; + #clock-cells = <0>; + #phy-cells = <0>; + + vddio-supply = <&vreg_l12a_1p8>; + vcca-supply = <&vreg_l28a_0p925>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml new file mode 100644 index 000000000000..4e710ef75523 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml @@ -0,0 +1,189 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QMP PHY controller (MSM8996 PCIe) + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: + QMP PHY controller supports physical layer functionality for a number of + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. + +properties: + compatible: + const: qcom,msm8996-qmp-pcie-phy + + reg: + items: + - description: serdes + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + clocks: + maxItems: 3 + + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + + resets: + maxItems: 3 + + reset-names: + items: + - const: phy + - const: common + - const: cfg + + vdda-phy-supply: true + + vdda-pll-supply: true + + vddp-ref-clk-supply: true + +patternProperties: + "^phy@[0-9a-f]+$": + type: object + description: one child node per PHY provided by this block + properties: + reg: + items: + - description: TX + - description: RX + - description: PCS + + clocks: + items: + - description: PIPE clock + + clock-names: + deprecated: true + items: + - enum: + - pipe0 + - pipe1 + - pipe2 + + resets: + items: + - description: PHY reset + + reset-names: + deprecated: true + items: + - enum: + - lane0 + - lane1 + - lane2 + + "#clock-cells": + const: 0 + + clock-output-names: + maxItems: 1 + + "#phy-cells": + const: 0 + + required: + - reg + - clocks + - resets + - "#clock-cells" + - clock-output-names + - "#phy-cells" + + additionalProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + - clocks + - clock-names + - resets + - reset-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8996.h> + pcie_phy: phy-wrapper@34000 { + compatible = "qcom,msm8996-qmp-pcie-phy"; + reg = <0x34000 0x488>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x34000 0x4000>; + + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_PCIE_PHY_BCR>, + <&gcc GCC_PCIE_PHY_COM_BCR>, + <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; + reset-names = "phy", "common", "cfg"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + + pciephy_0: phy@1000 { + reg = <0x1000 0x130>, + <0x1200 0x200>, + <0x1400 0x1dc>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + + #clock-cells = <0>; + clock-output-names = "pcie_0_pipe_clk_src"; + + #phy-cells = <0>; + }; + + pciephy_1: phy@2000 { + reg = <0x2000 0x130>, + <0x2200 0x200>, + <0x2400 0x1dc>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk_src"; + + #phy-cells = <0>; + }; + + pciephy_2: phy@3000 { + reg = <0x3000 0x130>, + <0x3200 0x200>, + <0x3400 0x1dc>; + + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; + resets = <&gcc GCC_PCIE_2_PHY_BCR>; + + #clock-cells = <0>; + clock-output-names = "pcie_2_pipe_clk_src"; + + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml new file mode 100644 index 000000000000..324ad7d03a38 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml @@ -0,0 +1,296 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,qmp-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QMP PHY controller (PCIe) + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: + QMP PHY controller supports physical layer functionality for a number of + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. + +properties: + compatible: + enum: + - qcom,ipq6018-qmp-pcie-phy + - qcom,ipq8074-qmp-gen3-pcie-phy + - qcom,ipq8074-qmp-pcie-phy + - qcom,msm8998-qmp-pcie-phy + - qcom,sc8180x-qmp-pcie-phy + - qcom,sdm845-qhp-pcie-phy + - qcom,sdm845-qmp-pcie-phy + - qcom,sdx55-qmp-pcie-phy + - qcom,sm8250-qmp-gen3x1-pcie-phy + - qcom,sm8250-qmp-gen3x2-pcie-phy + - qcom,sm8250-qmp-modem-pcie-phy + - qcom,sm8450-qmp-gen3x1-pcie-phy + - qcom,sm8450-qmp-gen4x2-pcie-phy + + reg: + items: + - description: serdes + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + clocks: + minItems: 2 + maxItems: 4 + + clock-names: + minItems: 2 + maxItems: 4 + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + maxItems: 2 + + vdda-phy-supply: true + + vdda-pll-supply: true + + vddp-ref-clk-supply: true + +patternProperties: + "^phy@[0-9a-f]+$": + type: object + description: single PHY-provider child node + properties: + reg: + minItems: 3 + maxItems: 6 + + clocks: + items: + - description: PIPE clock + + clock-names: + deprecated: true + items: + - const: pipe0 + + "#clock-cells": + const: 0 + + clock-output-names: + maxItems: 1 + + "#phy-cells": + const: 0 + + required: + - reg + - clocks + - "#clock-cells" + - clock-output-names + - "#phy-cells" + + additionalProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-qmp-pcie-phy + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + resets: + maxItems: 2 + reset-names: + items: + - const: phy + - const: common + required: + - vdda-phy-supply + - vdda-pll-supply + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq6018-qmp-pcie-phy + - qcom,ipq8074-qmp-gen3-pcie-phy + - qcom,ipq8074-qmp-pcie-phy + then: + properties: + clocks: + maxItems: 2 + clock-names: + items: + - const: aux + - const: cfg_ahb + resets: + maxItems: 2 + reset-names: + items: + - const: phy + - const: common + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8180x-qmp-pcie-phy + - qcom,sdm845-qhp-pcie-phy + - qcom,sdm845-qmp-pcie-phy + - qcom,sdx55-qmp-pcie-phy + - qcom,sm8250-qmp-gen3x1-pcie-phy + - qcom,sm8250-qmp-gen3x2-pcie-phy + - qcom,sm8250-qmp-modem-pcie-phy + - qcom,sm8450-qmp-gen3x1-pcie-phy + - qcom,sm8450-qmp-gen4x2-pcie-phy + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: refgen + resets: + maxItems: 1 + reset-names: + items: + - const: phy + required: + - vdda-phy-supply + - vdda-pll-supply + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8250-qmp-gen3x2-pcie-phy + - qcom,sm8250-qmp-modem-pcie-phy + - qcom,sm8450-qmp-gen4x2-pcie-phy + then: + patternProperties: + "^phy@[0-9a-f]+$": + properties: + reg: + items: + - description: TX lane 1 + - description: RX lane 1 + - description: PCS + - description: TX lane 2 + - description: RX lane 2 + - description: PCS_MISC + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8180x-qmp-pcie-phy + - qcom,sdm845-qmp-pcie-phy + - qcom,sdx55-qmp-pcie-phy + - qcom,sm8250-qmp-gen3x1-pcie-phy + - qcom,sm8450-qmp-gen3x1-pcie-phy + then: + patternProperties: + "^phy@[0-9a-f]+$": + properties: + reg: + items: + - description: TX + - description: RX + - description: PCS + - description: PCS_MISC + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq6018-qmp-pcie-phy + - qcom,ipq8074-qmp-pcie-phy + - qcom,msm8998-qmp-pcie-phy + - qcom,sdm845-qhp-pcie-phy + then: + patternProperties: + "^phy@[0-9a-f]+$": + properties: + reg: + items: + - description: TX + - description: RX + - description: PCS + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8250.h> + phy-wrapper@1c0e000 { + compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; + reg = <0x01c0e000 0x1c0>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x01c0e000 0x1000>; + + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_WIGIG_CLKREF_EN>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + phy@200 { + reg = <0x200 0x170>, + <0x400 0x200>, + <0xa00 0x1f0>, + <0x600 0x170>, + <0x800 0x200>, + <0xe00 0xf4>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml deleted file mode 100644 index 630ceaf915e2..000000000000 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +++ /dev/null @@ -1,487 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - -%YAML 1.2 ---- -$id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" - -title: Qualcomm QMP PHY controller - -maintainers: - - Vinod Koul <vkoul@kernel.org> - -description: - QMP phy controller supports physical layer functionality for a number of - controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. - -properties: - compatible: - enum: - - qcom,ipq6018-qmp-pcie-phy - - qcom,ipq6018-qmp-usb3-phy - - qcom,ipq8074-qmp-pcie-phy - - qcom,ipq8074-qmp-usb3-phy - - qcom,msm8996-qmp-pcie-phy - - qcom,msm8996-qmp-ufs-phy - - qcom,msm8996-qmp-usb3-phy - - qcom,msm8998-qmp-pcie-phy - - qcom,msm8998-qmp-ufs-phy - - qcom,msm8998-qmp-usb3-phy - - qcom,qcm2290-qmp-usb3-phy - - qcom,sc7180-qmp-usb3-phy - - qcom,sc8180x-qmp-pcie-phy - - qcom,sc8180x-qmp-ufs-phy - - qcom,sc8180x-qmp-usb3-phy - - qcom,sdm845-qhp-pcie-phy - - qcom,sdm845-qmp-pcie-phy - - qcom,sdm845-qmp-ufs-phy - - qcom,sdm845-qmp-usb3-phy - - qcom,sdm845-qmp-usb3-uni-phy - - qcom,sm6115-qmp-ufs-phy - - qcom,sm8150-qmp-ufs-phy - - qcom,sm8150-qmp-usb3-phy - - qcom,sm8150-qmp-usb3-uni-phy - - qcom,sm8250-qmp-ufs-phy - - qcom,sm8250-qmp-gen3x1-pcie-phy - - qcom,sm8250-qmp-gen3x2-pcie-phy - - qcom,sm8250-qmp-modem-pcie-phy - - qcom,sm8250-qmp-usb3-phy - - qcom,sm8250-qmp-usb3-uni-phy - - qcom,sm8350-qmp-ufs-phy - - qcom,sm8350-qmp-usb3-phy - - qcom,sm8350-qmp-usb3-uni-phy - - qcom,sdx55-qmp-pcie-phy - - qcom,sdx55-qmp-usb3-uni-phy - - reg: - minItems: 1 - items: - - description: Address and length of PHY's common serdes block. - - description: Address and length of PHY's DP_COM control block. - - "#clock-cells": - enum: [ 1, 2 ] - - "#address-cells": - enum: [ 1, 2 ] - - "#size-cells": - enum: [ 1, 2 ] - - ranges: true - - clocks: - minItems: 1 - maxItems: 4 - - clock-names: - minItems: 1 - maxItems: 4 - - resets: - minItems: 1 - maxItems: 3 - - reset-names: - minItems: 1 - maxItems: 3 - - vdda-phy-supply: - description: - Phandle to a regulator supply to PHY core block. - - vdda-pll-supply: - description: - Phandle to 1.8V regulator supply to PHY refclk pll block. - - vddp-ref-clk-supply: - description: - Phandle to a regulator supply to any specific refclk pll block. - -#Required nodes: -patternProperties: - "^phy@[0-9a-f]+$": - type: object - description: - Each device node of QMP phy is required to have as many child nodes as - the number of lanes the PHY has. - -required: - - compatible - - reg - - "#clock-cells" - - "#address-cells" - - "#size-cells" - - ranges - - clocks - - clock-names - - resets - - reset-names - -additionalProperties: false - -allOf: - - if: - properties: - compatible: - contains: - enum: - - qcom,sdm845-qmp-usb3-uni-phy - then: - properties: - clocks: - items: - - description: Phy aux clock. - - description: Phy config clock. - - description: 19.2 MHz ref clk. - - description: Phy common block aux clock. - clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - - const: com_aux - resets: - items: - - description: reset of phy block. - - description: phy common block reset. - reset-names: - items: - - const: phy - - const: common - required: - - vdda-phy-supply - - vdda-pll-supply - - if: - properties: - compatible: - contains: - enum: - - qcom,sdx55-qmp-usb3-uni-phy - then: - properties: - clocks: - items: - - description: Phy aux clock. - - description: Phy config clock. - - description: 19.2 MHz ref clk. - clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - resets: - items: - - description: reset of phy block. - - description: phy common block reset. - reset-names: - items: - - const: phy - - const: common - required: - - vdda-phy-supply - - vdda-pll-supply - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8996-qmp-pcie-phy - then: - properties: - clocks: - items: - - description: Phy aux clock. - - description: Phy config clock. - - description: 19.2 MHz ref clk. - clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - resets: - items: - - description: reset of phy block. - - description: phy common block reset. - - description: phy's ahb cfg block reset. - reset-names: - items: - - const: phy - - const: common - - const: cfg - required: - - vdda-phy-supply - - vdda-pll-supply - - if: - properties: - compatible: - contains: - enum: - - qcom,ipq8074-qmp-usb3-phy - - qcom,msm8996-qmp-usb3-phy - - qcom,msm8998-qmp-pcie-phy - - qcom,msm8998-qmp-usb3-phy - then: - properties: - clocks: - items: - - description: Phy aux clock. - - description: Phy config clock. - - description: 19.2 MHz ref clk. - clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - resets: - items: - - description: reset of phy block. - - description: phy common block reset. - reset-names: - items: - - const: phy - - const: common - required: - - vdda-phy-supply - - vdda-pll-supply - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8996-qmp-ufs-phy - then: - properties: - clocks: - items: - - description: 19.2 MHz ref clk. - clock-names: - items: - - const: ref - resets: - items: - - description: PHY reset in the UFS controller. - reset-names: - items: - - const: ufsphy - required: - - vdda-phy-supply - - vdda-pll-supply - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8998-qmp-ufs-phy - - qcom,sdm845-qmp-ufs-phy - - qcom,sm8150-qmp-ufs-phy - - qcom,sm8250-qmp-ufs-phy - then: - properties: - clocks: - items: - - description: 19.2 MHz ref clk. - - description: Phy reference aux clock. - clock-names: - items: - - const: ref - - const: ref_aux - resets: - items: - - description: PHY reset in the UFS controller. - reset-names: - items: - - const: ufsphy - required: - - vdda-phy-supply - - vdda-pll-supply - - if: - properties: - compatible: - contains: - enum: - - qcom,ipq6018-qmp-pcie-phy - - qcom,ipq8074-qmp-pcie-phy - then: - properties: - clocks: - items: - - description: Phy aux clock. - - description: Phy config clock. - clock-names: - items: - - const: aux - - const: cfg_ahb - resets: - items: - - description: reset of phy block. - - description: phy common block reset. - reset-names: - items: - - const: phy - - const: common - - if: - properties: - compatible: - contains: - enum: - - qcom,sc8180x-qmp-pcie-phy - - qcom,sdm845-qhp-pcie-phy - - qcom,sdm845-qmp-pcie-phy - - qcom,sdx55-qmp-pcie-phy - - qcom,sm8250-qmp-gen3x1-pcie-phy - - qcom,sm8250-qmp-gen3x2-pcie-phy - - qcom,sm8250-qmp-modem-pcie-phy - then: - properties: - clocks: - items: - - description: Phy aux clock. - - description: Phy config clock. - - description: 19.2 MHz ref clk. - - description: Phy refgen clk. - clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - - const: refgen - resets: - items: - - description: reset of phy block. - reset-names: - items: - - const: phy - required: - - vdda-phy-supply - - vdda-pll-supply - - if: - properties: - compatible: - contains: - enum: - - qcom,sm8150-qmp-usb3-phy - - qcom,sm8150-qmp-usb3-uni-phy - - qcom,sm8250-qmp-usb3-uni-phy - - qcom,sm8350-qmp-usb3-uni-phy - then: - properties: - clocks: - items: - - description: Phy aux clock. - - description: 19.2 MHz ref clk source. - - description: 19.2 MHz ref clk. - - description: Phy common block aux clock. - clock-names: - items: - - const: aux - - const: ref_clk_src - - const: ref - - const: com_aux - resets: - items: - - description: reset of phy block. - - description: phy common block reset. - reset-names: - items: - - const: phy - - const: common - required: - - vdda-phy-supply - - vdda-pll-supply - - if: - properties: - compatible: - contains: - enum: - - qcom,sm8250-qmp-usb3-phy - - qcom,sm8350-qmp-usb3-phy - then: - properties: - clocks: - items: - - description: Phy aux clock. - - description: 19.2 MHz ref clk. - - description: Phy common block aux clock. - clock-names: - items: - - const: aux - - const: ref_clk_src - - const: com_aux - resets: - items: - - description: reset of phy block. - - description: phy common block reset. - reset-names: - items: - - const: phy - - const: common - required: - - vdda-phy-supply - - vdda-pll-supply - - if: - properties: - compatible: - contains: - enum: - - qcom,qcm2290-qmp-usb3-phy - then: - properties: - clocks: - items: - - description: Phy config clock. - - description: 19.2 MHz ref clk. - - description: Phy common block aux clock. - clock-names: - items: - - const: cfg_ahb - - const: ref - - const: com_aux - resets: - items: - - description: phy_phy reset. - - description: reset of phy block. - reset-names: - items: - - const: phy_phy - - const: phy - required: - - vdda-phy-supply - - vdda-pll-supply - -examples: - - | - #include <dt-bindings/clock/qcom,gcc-sdm845.h> - usb_2_qmpphy: phy-wrapper@88eb000 { - compatible = "qcom,sdm845-qmp-usb3-uni-phy"; - reg = <0x088eb000 0x18c>; - #clock-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x088eb000 0x2000>; - - clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_SEC_CLKREF_CLK>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; - - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; - - vdda-phy-supply = <&vdda_usb2_ss_1p2>; - vdda-pll-supply = <&vdda_usb2_ss_core>; - - usb_2_ssphy: phy@200 { - reg = <0x200 0x128>, - <0x400 0x1fc>, - <0x800 0x218>, - <0x600 0x70>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; - }; diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml new file mode 100644 index 000000000000..815c375d0f7b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml @@ -0,0 +1,240 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,qmp-ufs-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QMP PHY controller (UFS) + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: + QMP PHY controller supports physical layer functionality for a number of + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. + +properties: + compatible: + enum: + - qcom,msm8996-qmp-ufs-phy + - qcom,msm8998-qmp-ufs-phy + - qcom,sc8180x-qmp-ufs-phy + - qcom,sc8280xp-qmp-ufs-phy + - qcom,sdm845-qmp-ufs-phy + - qcom,sm6115-qmp-ufs-phy + - qcom,sm6350-qmp-ufs-phy + - qcom,sm8150-qmp-ufs-phy + - qcom,sm8250-qmp-ufs-phy + - qcom,sm8350-qmp-ufs-phy + - qcom,sm8450-qmp-ufs-phy + + reg: + items: + - description: serdes + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + items: + - const: ufsphy + + vdda-phy-supply: true + + vdda-pll-supply: true + + vddp-ref-clk-supply: true + +patternProperties: + "^phy@[0-9a-f]+$": + type: object + description: single PHY-provider child node + properties: + reg: + minItems: 3 + maxItems: 6 + + "#phy-cells": + const: 0 + + required: + - reg + - "#phy-cells" + + additionalProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + - clocks + - clock-names + - resets + - reset-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-qmp-ufs-phy + then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: ref + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-qmp-ufs-phy + - qcom,sc8180x-qmp-ufs-phy + - qcom,sc8280xp-qmp-ufs-phy + - qcom,sdm845-qmp-ufs-phy + - qcom,sm6115-qmp-ufs-phy + - qcom,sm6350-qmp-ufs-phy + - qcom,sm8150-qmp-ufs-phy + - qcom,sm8250-qmp-ufs-phy + then: + properties: + clocks: + maxItems: 2 + clock-names: + items: + - const: ref + - const: ref_aux + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8450-qmp-ufs-phy + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: ref + - const: ref_aux + - const: qref + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-qmp-ufs-phy + - qcom,sc8280xp-qmp-ufs-phy + - qcom,sdm845-qmp-ufs-phy + - qcom,sm6350-qmp-ufs-phy + - qcom,sm8150-qmp-ufs-phy + - qcom,sm8250-qmp-ufs-phy + - qcom,sm8350-qmp-ufs-phy + - qcom,sm8450-qmp-ufs-phy + then: + patternProperties: + "^phy@[0-9a-f]+$": + properties: + reg: + items: + - description: TX lane 1 + - description: RX lane 1 + - description: PCS + - description: TX lane 2 + - description: RX lane 2 + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8180x-qmp-ufs-phy + then: + patternProperties: + "^phy@[0-9a-f]+$": + properties: + reg: + items: + - description: TX + - description: RX + - description: PCS + - description: PCS_MISC + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-qmp-ufs-phy + - qcom,sm6115-qmp-ufs-phy + then: + patternProperties: + "^phy@[0-9a-f]+$": + properties: + reg: + items: + - description: TX + - description: RX + - description: PCS + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> + #include <dt-bindings/clock/qcom,rpmh.h> + phy-wrapper@1d87000 { + compatible = "qcom,sc8280xp-qmp-ufs-phy"; + reg = <0x01d87000 0xe10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x01d87000 0x1000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + vdda-phy-supply = <&vreg_l6b>; + vdda-pll-supply = <&vreg_l3b>; + + phy@400 { + reg = <0x400 0x108>, + <0x600 0x1e0>, + <0xc00 0x1dc>, + <0x800 0x108>, + <0xa00 0x1e0>; + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml new file mode 100644 index 000000000000..7acb4b7de7f9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml @@ -0,0 +1,401 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,qmp-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QMP PHY controller (USB) + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: + QMP PHY controller supports physical layer functionality for a number of + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. + +properties: + compatible: + enum: + - qcom,ipq6018-qmp-usb3-phy + - qcom,ipq8074-qmp-usb3-phy + - qcom,msm8996-qmp-usb3-phy + - qcom,msm8998-qmp-usb3-phy + - qcom,qcm2290-qmp-usb3-phy + - qcom,sc7180-qmp-usb3-phy + - qcom,sc8180x-qmp-usb3-phy + - qcom,sc8280xp-qmp-usb3-uni-phy + - qcom,sdm845-qmp-usb3-phy + - qcom,sdm845-qmp-usb3-uni-phy + - qcom,sdx55-qmp-usb3-uni-phy + - qcom,sdx65-qmp-usb3-uni-phy + - qcom,sm8150-qmp-usb3-phy + - qcom,sm8150-qmp-usb3-uni-phy + - qcom,sm8250-qmp-usb3-phy + - qcom,sm8250-qmp-usb3-uni-phy + - qcom,sm8350-qmp-usb3-phy + - qcom,sm8350-qmp-usb3-uni-phy + - qcom,sm8450-qmp-usb3-phy + + reg: + minItems: 1 + items: + - description: serdes + - description: DP_COM + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + clocks: + minItems: 3 + maxItems: 4 + + clock-names: + minItems: 3 + maxItems: 4 + + power-domains: + maxItems: 1 + + resets: + maxItems: 2 + + reset-names: + maxItems: 2 + + vdda-phy-supply: true + + vdda-pll-supply: true + + vddp-ref-clk-supply: true + +patternProperties: + "^phy@[0-9a-f]+$": + type: object + description: single PHY-provider child node + properties: + reg: + minItems: 3 + maxItems: 6 + + clocks: + items: + - description: PIPE clock + + clock-names: + deprecated: true + items: + - const: pipe0 + + "#clock-cells": + const: 0 + + clock-output-names: + maxItems: 1 + + "#phy-cells": + const: 0 + + required: + - reg + - clocks + - "#clock-cells" + - clock-output-names + - "#phy-cells" + + additionalProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + - clocks + - clock-names + - resets + - reset-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7180-qmp-usb3-phy + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: com_aux + resets: + maxItems: 1 + reset-names: + items: + - const: phy + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm845-qmp-usb3-uni-phy + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: com_aux + resets: + maxItems: 2 + reset-names: + items: + - const: phy + - const: common + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-qmp-usb3-phy + - qcom,msm8996-qmp-usb3-phy + - qcom,msm8998-qmp-usb3-phy + - qcom,sdx55-qmp-usb3-uni-phy + - qcom,sdx65-qmp-usb3-uni-phy + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + resets: + maxItems: 2 + reset-names: + items: + - const: phy + - const: common + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8280xp-qmp-usb3-uni-phy + - qcom,sm8150-qmp-usb3-phy + - qcom,sm8150-qmp-usb3-uni-phy + - qcom,sm8250-qmp-usb3-uni-phy + - qcom,sm8350-qmp-usb3-uni-phy + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: aux + - const: ref_clk_src + - const: ref + - const: com_aux + resets: + maxItems: 2 + reset-names: + items: + - const: phy + - const: common + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8250-qmp-usb3-phy + - qcom,sm8350-qmp-usb3-phy + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: aux + - const: ref_clk_src + - const: com_aux + resets: + maxItems: 2 + reset-names: + items: + - const: phy + - const: common + + - if: + properties: + compatible: + contains: + enum: + - qcom,qcm2290-qmp-usb3-phy + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: cfg_ahb + - const: ref + - const: com_aux + resets: + maxItems: 2 + reset-names: + items: + - const: phy_phy + - const: phy + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8280xp-qmp-usb3-uni-phy + then: + required: + - power-domains + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm845-qmp-usb3-phy + - qcom,sm8150-qmp-usb3-phy + - qcom,sm8350-qmp-usb3-phy + - qcom,sm8450-qmp-usb3-phy + then: + patternProperties: + "^phy@[0-9a-f]+$": + properties: + reg: + items: + - description: TX lane 1 + - description: RX lane 1 + - description: PCS + - description: TX lane 2 + - description: RX lane 2 + - description: PCS_MISC + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-qmp-usb3-phy + then: + patternProperties: + "^phy@[0-9a-f]+$": + properties: + reg: + items: + - description: TX lane 1 + - description: RX lane 1 + - description: PCS + - description: TX lane 2 + - description: RX lane 2 + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq6018-qmp-usb3-phy + - qcom,ipq8074-qmp-usb3-phy + - qcom,qcm2290-qmp-usb3-phy + - qcom,sc7180-qmp-usb3-phy + - qcom,sc8180x-qmp-usb3-phy + - qcom,sdx55-qmp-usb3-uni-phy + - qcom,sdx65-qmp-usb3-uni-phy + - qcom,sm8150-qmp-usb3-uni-phy + - qcom,sm8250-qmp-usb3-phy + then: + patternProperties: + "^phy@[0-9a-f]+$": + properties: + reg: + items: + - description: TX + - description: RX + - description: PCS + - description: PCS_MISC + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-qmp-usb3-phy + - qcom,sc8280xp-qmp-usb3-uni-phy + - qcom,sm8250-qmp-usb3-uni-phy + - qcom,sm8350-qmp-usb3-uni-phy + then: + patternProperties: + "^phy@[0-9a-f]+$": + properties: + reg: + items: + - description: TX + - description: RX + - description: PCS + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + usb_2_qmpphy: phy-wrapper@88eb000 { + compatible = "qcom,sdm845-qmp-usb3-uni-phy"; + reg = <0x088eb000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x088eb000 0x2000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; + + usb_2_ssphy: phy@200 { + reg = <0x200 0x128>, + <0x400 0x1fc>, + <0x800 0x218>, + <0x600 0x70>; + + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + + #clock-cells = <0>; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml index 60dc27834e1d..97a7ecafbf85 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm QMP USB3 DP PHY controller maintainers: - - Manu Gautam <mgautam@codeaurora.org> + - Wesley Cheng <quic_wcheng@quicinc.com> properties: compatible: @@ -16,6 +16,7 @@ properties: - qcom,sc7180-qmp-usb3-dp-phy - qcom,sc7280-qmp-usb3-dp-phy - qcom,sc8180x-qmp-usb3-dp-phy + - qcom,sc8280xp-qmp-usb43dp-phy - qcom,sdm845-qmp-usb3-dp-phy - qcom,sm8250-qmp-usb3-dp-phy reg: @@ -30,9 +31,6 @@ properties: - const: dp_com - const: dp - "#clock-cells": - enum: [ 1, 2 ] - "#address-cells": enum: [ 1, 2 ] @@ -55,6 +53,9 @@ properties: - const: ref - const: com_aux + power-domains: + maxItems: 1 + resets: items: - description: reset of phy block. @@ -81,6 +82,7 @@ properties: patternProperties: "^usb3-phy@[0-9a-f]+$": type: object + additionalProperties: false description: The USB3 PHY. @@ -99,6 +101,7 @@ patternProperties: - description: pipe clock clock-names: + deprecated: true items: - const: pipe0 @@ -115,12 +118,12 @@ patternProperties: required: - reg - clocks - - clock-names - '#clock-cells' - '#phy-cells' "^dp-phy@[0-9a-f]+$": type: object + additionalProperties: false description: The DP PHY. @@ -147,7 +150,6 @@ patternProperties: required: - compatible - reg - - "#clock-cells" - "#address-cells" - "#size-cells" - ranges @@ -160,6 +162,17 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8280xp-qmp-usb43dp-phy + then: + required: + - power-domains + examples: - | #include <dt-bindings/clock/qcom,gcc-sdm845.h> @@ -169,7 +182,6 @@ examples: <0x088e8000 0x10>, <0x088ea000 0x40>; reg-names = "usb", "dp_com", "dp"; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x088e9000 0x2000>; @@ -197,7 +209,6 @@ examples: #clock-cells = <0>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; }; diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index aa2e409a1a09..636ea430fbff 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm QUSB2 phy controller maintainers: - - Manu Gautam <mgautam@codeaurora.org> + - Wesley Cheng <quic_wcheng@quicinc.com> description: QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. @@ -19,6 +19,7 @@ properties: - items: - enum: - qcom,ipq8074-qusb2-phy + - qcom,msm8953-qusb2-phy - qcom,msm8996-qusb2-phy - qcom,msm8998-qusb2-phy - qcom,qcm2290-qusb2-phy @@ -29,7 +30,9 @@ properties: - items: - enum: - qcom,sc7180-qusb2-phy + - qcom,sdm670-qusb2-phy - qcom,sdm845-qusb2-phy + - qcom,sm6350-qusb2-phy - const: qcom,qusb2-v2-phy reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt deleted file mode 100644 index b3b75c1e6285..000000000000 --- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt +++ /dev/null @@ -1,84 +0,0 @@ -Qualcomm's USB HS PHY - -PROPERTIES - -- compatible: - Usage: required - Value type: <string> - Definition: Should contain "qcom,usb-hs-phy" and more specifically one of the - following: - - "qcom,usb-hs-phy-apq8064" - "qcom,usb-hs-phy-msm8916" - "qcom,usb-hs-phy-msm8974" - -- #phy-cells: - Usage: required - Value type: <u32> - Definition: Should contain 0 - -- clocks: - Usage: required - Value type: <prop-encoded-array> - Definition: Should contain clock specifier for the reference and sleep - clocks - -- clock-names: - Usage: required - Value type: <stringlist> - Definition: Should contain "ref" and "sleep" for the reference and sleep - clocks respectively - -- resets: - Usage: required - Value type: <prop-encoded-array> - Definition: Should contain the phy and POR resets - -- reset-names: - Usage: required - Value type: <stringlist> - Definition: Should contain "phy" and "por" for the phy and POR resets - respectively - -- v3p3-supply: - Usage: required - Value type: <phandle> - Definition: Should contain a reference to the 3.3V supply - -- v1p8-supply: - Usage: required - Value type: <phandle> - Definition: Should contain a reference to the 1.8V supply - -- extcon: - Usage: optional - Value type: <prop-encoded-array> - Definition: Should contain the vbus extcon - -- qcom,init-seq: - Usage: optional - Value type: <u8 array> - Definition: Should contain a sequence of ULPI address and value pairs to - program into the ULPI_EXT_VENDOR_SPECIFIC area. This is related - to Device Mode Eye Diagram test. The addresses are offsets - from the ULPI_EXT_VENDOR_SPECIFIC address, for example, - <0x1 0x53> would mean "write the value 0x53 to address 0x81". - -EXAMPLE - -otg: usb-controller { - ulpi { - phy { - compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy"; - #phy-cells = <0>; - clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; - clock-names = "ref", "sleep"; - resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>; - reset-names = "phy", "por"; - v3p3-supply = <&pm8941_l24>; - v1p8-supply = <&pm8941_l6>; - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x63>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml new file mode 100644 index 000000000000..0655e485b260 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,usb-hs-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm's USB HS PHY binding description + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +if: + properties: + compatible: + contains: + const: qcom,usb-hs-phy-apq8064 +then: + properties: + resets: + maxItems: 1 + + reset-names: + const: por + +else: + properties: + resets: + minItems: 2 + maxItems: 2 + + reset-names: + items: + - const: phy + - const: por + +properties: + compatible: + items: + - enum: + - qcom,usb-hs-phy-apq8064 + - qcom,usb-hs-phy-msm8226 + - qcom,usb-hs-phy-msm8916 + - qcom,usb-hs-phy-msm8974 + - const: qcom,usb-hs-phy + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + maxItems: 2 + contains: + items: + - const: ref + - const: sleep + + resets: true + + reset-names: true + + v1p8-supply: true + + v3p3-supply: true + + extcon: true + + "#phy-cells": + const: 0 + + qcom,init-seq: + $ref: /schemas/types.yaml#/definitions/uint8-matrix + description: > + Sequence of ULPI address and value pairs to + program into the ULPI_EXT_VENDOR_SPECIFIC area. + This is related to Device Mode Eye Diagram test. + maxItems: 32 # no hard limit + items: + items: + - description: > + the address is offset from the ULPI_EXT_VENDOR_SPECIFIC address + - description: value + +required: + - clocks + - clock-names + - resets + - reset-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + otg: usb-controller { + #reset-cells = <1>; + + ulpi { + phy { + compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&clk 0>, <&clk 258>; + clock-names = "ref", "sleep"; + resets = <&gcc 10>, <&otg 0>; + reset-names = "phy", "por"; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x63>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml index 20203a8a9e41..68e70961beb2 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -7,7 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm Synopsys Femto High-Speed USB PHY V2 maintainers: - - Wesley Cheng <wcheng@codeaurora.org> + - Wesley Cheng <quic_wcheng@quicinc.com> description: | Qualcomm High-Speed USB PHY @@ -15,11 +15,16 @@ description: | properties: compatible: enum: + - qcom,usb-snps-hs-5nm-phy - qcom,usb-snps-hs-7nm-phy - qcom,sc7280-usb-hs-phy + - qcom,sc8180x-usb-hs-phy + - qcom,sc8280xp-usb-hs-phy + - qcom,sm6375-usb-hs-phy - qcom,sm8150-usb-hs-phy - qcom,sm8250-usb-hs-phy - qcom,sm8350-usb-hs-phy + - qcom,sm8450-usb-hs-phy - qcom,usb-snps-femto-v2-phy reg: @@ -49,6 +54,94 @@ properties: vdda33-supply: description: phandle to the regulator 3.3V supply node. + qcom,hs-disconnect-bp: + description: + This adjusts the voltage level for the threshold used to + detect a disconnect event at the host. + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -272 + maximum: 2156 + + qcom,squelch-detector-bp: + description: + This adjusts the voltage level for the threshold used to + detect valid high-speed data. + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -2090 + maximum: 1590 + + qcom,hs-amplitude-bp: + description: + This adjusts the high-speed DC level voltage. + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -660 + maximum: 2670 + + qcom,pre-emphasis-duration-bp: + description: + This signal controls the duration for which the + HS pre-emphasis current is sourced onto DP<#> or DM<#>. + The HS Transmitter pre-emphasis duration is defined in terms of + unit amounts. One unit of pre-emphasis duration is approximately + 650 ps and is defined as 1X pre-emphasis duration. + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: 10000 + maximum: 20000 + + qcom,pre-emphasis-amplitude-bp: + description: + This signal controls the amount of current sourced to + DP<#> and DM<#> after a J-to-K or K-to-J transition. + The HS Transmitter pre-emphasis current is defined in terms of unit + amounts. One unit amount is approximately 2 mA and is defined as + 1X pre-emphasis current. + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: 10000 + maximum: 40000 + + qcom,hs-rise-fall-time-bp: + description: + This adjusts the rise/fall times of the high-speed waveform. + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -4100 + maximum: 5430 + + qcom,hs-crossover-voltage-microvolt: + description: + This adjusts the voltage at which the DP<#> and DM<#> + signals cross while transmitting in HS mode. + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -31000 + maximum: 28000 + + qcom,hs-output-impedance-micro-ohms: + description: + In some applications, there can be significant series resistance + on the D+ and D- paths between the transceiver and cable. This adjusts + the driver source impedance to compensate for added series + resistance on the USB. The hardware accepts only discrete values. The + value closest to the provided input will be chosen as the override value + for this param. + minimum: -2300000 + maximum: 6100000 + + qcom,ls-fs-output-impedance-bp: + description: + This adjusts the low- and full-speed single-ended source + impedance while driving high. The following adjustment values are based + on nominal process, voltage, and temperature. + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -1053 + maximum: 1310 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt deleted file mode 100644 index a3bd1c4499b7..000000000000 --- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt +++ /dev/null @@ -1,112 +0,0 @@ -* Renesas R-Car generation 2 USB PHY - -This file provides information on what the device node for the R-Car generation -2 USB PHY contains. - -Required properties: -- compatible: "renesas,usb-phy-r8a7742" if the device is a part of R8A7742 SoC. - "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC. - "renesas,usb-phy-r8a7744" if the device is a part of R8A7744 SoC. - "renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC. - "renesas,usb-phy-r8a77470" if the device is a part of R8A77470 SoC. - "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. - "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC. - "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC. - "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 or - RZ/G1 compatible device. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: offset and length of the register block. -- #address-cells: number of address cells for the USB channel subnodes, must - be <1>. -- #size-cells: number of size cells for the USB channel subnodes, must be <0>. -- clocks: clock phandle and specifier pair. -- clock-names: string, clock input name, must be "usbhs". - -The USB PHY device tree node should have the subnodes corresponding to the USB -channels. These subnodes must contain the following properties: -- reg: the USB controller selector; see the table below for the values. -- #phy-cells: see phy-bindings.txt in the same directory, must be <1>. - -The phandle's argument in the PHY specifier is the USB controller selector for -the USB channel other than r8a77470 SoC; see the selector meanings below: - -+-----------+---------------+---------------+ -|\ Selector | | | -+ --------- + 0 | 1 | -| Channel \| | | -+-----------+---------------+---------------+ -| 0 | PCI EHCI/OHCI | HS-USB | -| 2 | PCI EHCI/OHCI | xHCI | -+-----------+---------------+---------------+ - -For r8a77470 SoC;see the selector meaning below: - -+-----------+---------------+---------------+ -|\ Selector | | | -+ --------- + 0 | 1 | -| Channel \| | | -+-----------+---------------+---------------+ -| 0 | EHCI/OHCI | HS-USB | -+-----------+---------------+---------------+ - -Example (Lager board): - - usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7790", "renesas,rcar-gen2-usb-phy"; - reg = <0 0xe6590100 0 0x100>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cpg CPG_MOD 704>; - clock-names = "usbhs"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 704>; - - usb0: usb-channel@0 { - reg = <0>; - #phy-cells = <1>; - }; - usb2: usb-channel@2 { - reg = <2>; - #phy-cells = <1>; - }; - }; - -Example (iWave RZ/G1C sbc): - - usbphy0: usb-phy0@e6590100 { - compatible = "renesas,usb-phy-r8a77470", - "renesas,rcar-gen2-usb-phy"; - reg = <0 0xe6590100 0 0x100>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cpg CPG_MOD 704>; - clock-names = "usbhs"; - power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; - resets = <&cpg 704>; - - usb0: usb-channel@0 { - reg = <0>; - #phy-cells = <1>; - }; - }; - - usbphy1: usb-phy@e6598100 { - compatible = "renesas,usb-phy-r8a77470", - "renesas,rcar-gen2-usb-phy"; - reg = <0 0xe6598100 0 0x100>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cpg CPG_MOD 706>; - clock-names = "usbhs"; - power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; - resets = <&cpg 706>; - - usb1: usb-channel@0 { - reg = <0>; - #phy-cells = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/phy/renesas,rcar-gen2-usb-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,rcar-gen2-usb-phy.yaml new file mode 100644 index 000000000000..afc09f39b02b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/renesas,rcar-gen2-usb-phy.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/renesas,rcar-gen2-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Gen2 USB PHY + +maintainers: + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +properties: + compatible: + items: + - enum: + - renesas,usb-phy-r8a7742 # RZ/G1H + - renesas,usb-phy-r8a7743 # RZ/G1M + - renesas,usb-phy-r8a7744 # RZ/G1N + - renesas,usb-phy-r8a7745 # RZ/G1E + - renesas,usb-phy-r8a77470 # RZ/G1C + - renesas,usb-phy-r8a7790 # R-Car H2 + - renesas,usb-phy-r8a7791 # R-Car M2-W + - renesas,usb-phy-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-usb-phy # R-Car Gen2 or RZ/G1 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: usbhs + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +patternProperties: + "^usb-phy@[02]$": + type: object + description: Subnode corresponding to a USB channel. + + properties: + reg: + description: FIXME RZ/G1C supports channel 0 only + enum: [0, 2] + + '#phy-cells': + description: | + The phandle's argument in the PHY specifier is the USB controller + selector for the USB channel. + For RZ/G1C: + - 0 for EHCI/OHCI + - 1 for HS-USB + For all other SoCS: + - 0 for PCI EHCI/OHCI + - 1 for HS-USB (channel 0) or xHCI (channel 2) + const: 1 + + required: + - reg + - '#phy-cells' + + additionalProperties: false + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + - clocks + - clock-names + - resets + - power-domains + - usb-phy@0 + +if: + properties: + compatible: + contains: + const: renesas,usb-phy-r8a77470 +then: + properties: + usb-phy@2: false +else: + required: + - usb-phy@2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> + #include <dt-bindings/power/r8a7790-sysc.h> + usb-phy-controller@e6590100 { + compatible = "renesas,usb-phy-r8a7790", "renesas,rcar-gen2-usb-phy"; + reg = <0xe6590100 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 704>; + + usb0: usb-phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml index 3a6e1165419c..f82649a55e91 100644 --- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml @@ -32,8 +32,10 @@ properties: - items: - enum: + - renesas,usb2-phy-r9a07g043 # RZ/G2UL - renesas,usb2-phy-r9a07g044 # RZ/G2{L,LC} - - const: renesas,rzg2l-usb2-phy # RZ/G2L family + - renesas,usb2-phy-r9a07g054 # RZ/V2L + - const: renesas,rzg2l-usb2-phy reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml index b8483f9edbfc..fe57c5373d18 100644 --- a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml +++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml @@ -34,7 +34,7 @@ properties: # must not be 0. minItems: 2 items: - - const: usb3-if # The funcional clock + - const: usb3-if # The functional clock - const: usb3s_clk # The usb3's external clock - const: usb_extal # The usb2's external clock diff --git a/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml new file mode 100644 index 000000000000..9f2d8d2cc7a5 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/rockchip,pcie3-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip PCIe v3 phy + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,rk3568-pcie3-phy + + reg: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 3 + + clock-names: + items: + - const: refclk_m + - const: refclk_n + - const: pclk + + data-lanes: + description: which lanes (by position) should be mapped to which + controller (value). 0 means lane disabled, higher value means used. + (controller-number +1 ) + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 16 + items: + minimum: 0 + maximum: 16 + + "#phy-cells": + const: 0 + + resets: + maxItems: 1 + + reset-names: + const: phy + + rockchip,phy-grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the syscon managing the phy "general register files" + + rockchip,pipe-grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the syscon managing the pipe "general register files" + +required: + - compatible + - reg + - rockchip,phy-grf + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3568-cru.h> + pcie30phy: phy@fe8c0000 { + compatible = "rockchip,rk3568-pcie3-phy"; + reg = <0xfe8c0000 0x20000>; + #phy-cells = <0>; + clocks = <&pmucru CLK_PCIE30PHY_REF_M>, + <&pmucru CLK_PCIE30PHY_REF_N>, + <&cru PCLK_PCIE30PHY>; + clock-names = "refclk_m", "refclk_n", "pclk"; + resets = <&cru SRST_PCIE30PHY>; + reset-names = "phy"; + rockchip,phy-grf = <&pcie30_phy_grf>; + }; diff --git a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml index 8a3032a3bd73..5c35e5ceec0b 100644 --- a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml @@ -18,6 +18,7 @@ properties: - rockchip,px30-dsi-dphy - rockchip,rk3128-dsi-dphy - rockchip,rk3368-dsi-dphy + - rockchip,rk3568-dsi-dphy reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml index bb4a2e4b8ab0..0e6505e9da50 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/rockchip-inno-csi-dphy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Rockchip SoC MIPI RX0 D-PHY Device Tree Bindings +title: Rockchip SoC MIPI RX0 D-PHY maintainers: - Heiko Stuebner <heiko@sntech.de> @@ -20,6 +20,7 @@ properties: - rockchip,rk1808-csi-dphy - rockchip,rk3326-csi-dphy - rockchip,rk3368-csi-dphy + - rockchip,rk3568-csi-dphy reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml b/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml index 7d888d358823..5114e99b0035 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml +++ b/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/rockchip-mipi-dphy-rx0.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Rockchip SoC MIPI RX0 D-PHY Device Tree Bindings +title: Rockchip SoC MIPI RX0 D-PHY maintainers: - Helen Koike <helen.koike@collabora.com> diff --git a/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml new file mode 100644 index 000000000000..b03b2f00cc5b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/samsung,dp-video-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC DisplayPort PHY + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Marek Szyprowski <m.szyprowski@samsung.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +properties: + compatible: + enum: + - samsung,exynos5250-dp-video-phy + - samsung,exynos5420-dp-video-phy + + "#phy-cells": + const: 0 + + samsung,pmu-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to PMU system controller interface. + +required: + - compatible + - "#phy-cells" + - samsung,pmu-syscon + +additionalProperties: false + +examples: + - | + phy { + compatible = "samsung,exynos5420-dp-video-phy"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml new file mode 100644 index 000000000000..efc679c385ab --- /dev/null +++ b/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/samsung,exynos-hdmi-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC HDMI PHY + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + oneOf: + - enum: + - samsung,exynos4210-hdmiphy + - samsung,exynos4212-hdmiphy + - const: samsung,exynos5-hdmiphy + deprecated: true + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-phy@38 { + compatible = "samsung,exynos4210-hdmiphy"; + reg = <0x38>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml index ac0af40be52d..28e299a9609d 100644 --- a/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/samsung,exynos-pcie-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Samsung SoC series PCIe PHY Device Tree Bindings +title: Samsung SoC series PCIe PHY maintainers: - Marek Szyprowski <m.szyprowski@samsung.com> diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos5250-sata-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos5250-sata-phy.yaml new file mode 100644 index 000000000000..8751e559484f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/samsung,exynos5250-sata-phy.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/samsung,exynos5250-sata-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos5250 SoC SATA PHY + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Marek Szyprowski <m.szyprowski@samsung.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +properties: + compatible: + const: samsung,exynos5250-sata-phy + + clocks: + maxItems: 1 + + clock-names: + items: + - const: sata_phyctrl + + "#phy-cells": + const: 0 + + reg: + maxItems: 1 + + samsung,syscon-phandle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to PMU system controller interface. + + samsung,exynos-sataphy-i2c-phandle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to I2C SATA interface. + +required: + - compatible + - clocks + - clock-names + - "#phy-cells" + - reg + - samsung,syscon-phandle + - samsung,exynos-sataphy-i2c-phandle + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5250.h> + + phy@12170000 { + compatible = "samsung,exynos5250-sata-phy"; + reg = <0x12170000 0x1ff>; + clocks = <&clock CLK_SATA_PHYCTRL>; + clock-names = "sata_phyctrl"; + #phy-cells = <0>; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; + }; diff --git a/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml new file mode 100644 index 000000000000..415440aaad89 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/samsung,mipi-video-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5P/Exynos SoC MIPI CSIS/DSIM DPHY + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Marek Szyprowski <m.szyprowski@samsung.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +description: | + For samsung,s5pv210-mipi-video-phy compatible PHYs the second cell in the + PHY specifier identifies the PHY and its meaning is as follows:: + 0 - MIPI CSIS 0, + 1 - MIPI DSIM 0, + 2 - MIPI CSIS 1, + 3 - MIPI DSIM 1. + + samsung,exynos5420-mipi-video-phy and samsung,exynos5433-mipi-video-phy + support additional fifth PHY:: + 4 - MIPI CSIS 2. + +properties: + compatible: + enum: + - samsung,s5pv210-mipi-video-phy + - samsung,exynos5420-mipi-video-phy + - samsung,exynos5433-mipi-video-phy + + "#phy-cells": + const: 1 + + syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to PMU system controller interface, valid only for + samsung,s5pv210-mipi-video-phy and samsung,exynos5420-mipi-video-phy. + + samsung,pmu-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to PMU system controller interface, valid for + samsung,exynos5433-mipi-video-phy. + + samsung,disp-sysreg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to DISP system controller interface, valid for + samsung,exynos5433-mipi-video-phy. + + samsung,cam0-sysreg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to CAM0 system controller interface, valid for + samsung,exynos5433-mipi-video-phy. + + samsung,cam1-sysreg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to CAM1 system controller interface, valid for + samsung,exynos5433-mipi-video-phy. + +required: + - compatible + - "#phy-cells" + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,s5pv210-mipi-video-phy + - samsung,exynos5420-mipi-video-phy + then: + properties: + samsung,pmu-syscon: false + samsung,disp-sysreg: false + samsung,cam0-sysreg: false + samsung,cam1-sysreg: false + required: + - syscon + else: + properties: + syscon: false + required: + - samsung,pmu-syscon + - samsung,disp-sysreg + - samsung,cam0-sysreg + - samsung,cam1-sysreg + +additionalProperties: false + +examples: + - | + phy { + compatible = "samsung,exynos5433-mipi-video-phy"; + #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; + samsung,cam0-sysreg = <&syscon_cam0>; + samsung,cam1-sysreg = <&syscon_cam1>; + samsung,disp-sysreg = <&syscon_disp>; + }; + + - | + phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + syscon = <&pmu_system_controller>; + #phy-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml index f6ed1a005e7a..c5dbb91ac402 100644 --- a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/samsung,ufs-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Samsung SoC series UFS PHY Device Tree Bindings +title: Samsung SoC series UFS PHY maintainers: - Alim Akhtar <alim.akhtar@samsung.com> @@ -17,6 +17,7 @@ properties: enum: - samsung,exynos7-ufs-phy - samsung,exynosautov9-ufs-phy + - tesla,fsd-ufs-phy reg: maxItems: 1 @@ -26,23 +27,25 @@ properties: - const: phy-pma clocks: - items: - - description: PLL reference clock - - description: symbol clock for input symbol ( rx0-ch0 symbol clock) - - description: symbol clock for input symbol ( rx1-ch1 symbol clock) - - description: symbol clock for output symbol ( tx0 symbol clock) + minItems: 1 + maxItems: 4 clock-names: - items: - - const: ref_clk - - const: rx1_symbol_clk - - const: rx0_symbol_clk - - const: tx0_symbol_clk + minItems: 1 + maxItems: 4 samsung,pmu-syscon: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: phandle for PMU system controller interface, used to - control pmu registers bits for ufs m-phy + $ref: '/schemas/types.yaml#/definitions/phandle-array' + maxItems: 1 + items: + minItems: 1 + items: + - description: phandle for PMU system controller interface, used to + control pmu registers bits for ufs m-phy + - description: offset of the pmu control register + description: + It can be phandle/offset pair. The second cell which can represent an + offset is optional. required: - "#phy-cells" @@ -53,6 +56,39 @@ required: - clock-names - samsung,pmu-syscon +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos7-ufs-phy + + then: + properties: + clocks: + items: + - description: PLL reference clock + - description: symbol clock for input symbol (rx0-ch0 symbol clock) + - description: symbol clock for input symbol (rx1-ch1 symbol clock) + - description: symbol clock for output symbol (tx0 symbol clock) + + clock-names: + items: + - const: ref_clk + - const: rx1_symbol_clk + - const: rx0_symbol_clk + - const: tx0_symbol_clk + + else: + properties: + clocks: + items: + - description: PLL reference clock + + clock-names: + items: + - const: ref_clk + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/phy/samsung,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb2-phy.yaml new file mode 100644 index 000000000000..d9f22a801cbf --- /dev/null +++ b/Documentation/devicetree/bindings/phy/samsung,usb2-phy.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/samsung,usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5P/Exynos SoC USB 2.0 PHY + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Marek Szyprowski <m.szyprowski@samsung.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +description: | + The first phandle argument in the PHY specifier identifies the PHY, its + meaning is compatible dependent. For the currently supported SoCs (Exynos4210 + and Exynos4212) it is as follows:: + 0 - USB device ("device"), + 1 - USB host ("host"), + 2 - HSIC0 ("hsic0"), + 3 - HSIC1 ("hsic1"), + Exynos3250 has only USB device phy available as phy 0. + + Exynos4210 and Exynos4212 use mode switching and require that mode switch + register is supplied. + +properties: + compatible: + enum: + - samsung,exynos3250-usb2-phy + - samsung,exynos4210-usb2-phy + - samsung,exynos4x12-usb2-phy + - samsung,exynos5250-usb2-phy + - samsung,exynos5420-usb2-phy + - samsung,s5pv210-usb2-phy + + clocks: + items: + - description: PHY module gate clock. + - description: Reference rate clock of PHY module. + + clock-names: + items: + - const: phy + - const: ref + + "#phy-cells": + const: 1 + + reg: + maxItems: 1 + + samsung,pmureg-phandle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to PMU system controller interface. + + samsung,sysreg-phandle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to system registers interface. + + vbus-supply: + description: + VBUS power source. + +required: + - compatible + - clocks + - clock-names + - "#phy-cells" + - reg + - samsung,pmureg-phandle + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos4x12-usb2-phy + - samsung,exynos5250-usb2-phy + - samsung,exynos5420-usb2-phy + then: + required: + - samsung,sysreg-phandle + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5420.h> + + phy@12130000 { + compatible = "samsung,exynos5420-usb2-phy"; + reg = <0x12130000 0x100>; + #phy-cells = <1>; + clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>; + clock-names = "phy", "ref"; + samsung,sysreg-phandle = <&sysreg_system_controller>; + samsung,pmureg-phandle = <&pmu_system_controller>; + }; diff --git a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml new file mode 100644 index 000000000000..5ba55f9f20cc --- /dev/null +++ b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/samsung,usb3-drd-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC USB 3.0 DRD PHY USB 2.0 PHY + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Marek Szyprowski <m.szyprowski@samsung.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +description: | + For samsung,exynos5250-usbdrd-phy and samsung,exynos5420-usbdrd-phy + compatible PHYs, the second cell in the PHY specifier identifies the + PHY id, which is interpreted as follows:: + 0 - UTMI+ type phy, + 1 - PIPE3 type phy. + + For SoCs like Exynos5420 having multiple USB 3.0 DRD PHY controllers, + 'usbdrd_phy' nodes should have numbered alias in the aliases node, in the + form of usbdrdphyN, N = 0, 1... (depending on number of controllers). + +properties: + compatible: + enum: + - samsung,exynos5250-usbdrd-phy + - samsung,exynos5420-usbdrd-phy + - samsung,exynos5433-usbdrd-phy + - samsung,exynos7-usbdrd-phy + + clocks: + minItems: 2 + maxItems: 5 + + clock-names: + minItems: 2 + maxItems: 5 + description: | + At least two clocks:: + - Main PHY clock (same as USB DRD controller i.e. DWC3 IP clock), used + for register access. + - PHY reference clock (usually crystal clock), used for PHY operations, + associated by phy name. It is used to determine bit values for clock + settings register. For Exynos5420 this is given as 'sclk_usbphy30' + in the CMU. + + "#phy-cells": + const: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Any connector to the data bus of this controller should be modelled using + the OF graph bindings specified. + + reg: + maxItems: 1 + + samsung,pmu-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to PMU system controller interface. + + vbus-supply: + description: + VBUS power source. + + vbus-boost-supply: + description: + VBUS Boost 5V power source. + +required: + - compatible + - clocks + - clock-names + - "#phy-cells" + - reg + - samsung,pmu-syscon + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5433-usbdrd-phy + - samsung,exynos7-usbdrd-phy + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: phy + - const: ref + - const: phy_utmi + - const: phy_pipe + - const: itp + else: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: phy + - const: ref + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5420.h> + + phy@12100000 { + compatible = "samsung,exynos5420-usbdrd-phy"; + reg = <0x12100000 0x100>; + #phy-cells = <1>; + clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; + vbus-supply = <&usb300_vbus_reg>; + }; diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt deleted file mode 100644 index 8f51aee91101..000000000000 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ /dev/null @@ -1,210 +0,0 @@ -Samsung S5P/Exynos SoC series MIPI CSIS/DSIM DPHY -------------------------------------------------- - -Required properties: -- compatible : should be one of the listed compatibles: - - "samsung,s5pv210-mipi-video-phy" - - "samsung,exynos5420-mipi-video-phy" - - "samsung,exynos5433-mipi-video-phy" -- #phy-cells : from the generic phy bindings, must be 1; - -In case of s5pv210 and exynos5420 compatible PHYs: -- syscon - phandle to the PMU system controller - -In case of exynos5433 compatible PHY: - - samsung,pmu-syscon - phandle to the PMU system controller - - samsung,disp-sysreg - phandle to the DISP system registers controller - - samsung,cam0-sysreg - phandle to the CAM0 system registers controller - - samsung,cam1-sysreg - phandle to the CAM1 system registers controller - -For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in -the PHY specifier identifies the PHY and its meaning is as follows: - 0 - MIPI CSIS 0, - 1 - MIPI DSIM 0, - 2 - MIPI CSIS 1, - 3 - MIPI DSIM 1. -"samsung,exynos5420-mipi-video-phy" and "samsung,exynos5433-mipi-video-phy" -supports additional fifth PHY: - 4 - MIPI CSIS 2. - -Samsung Exynos SoC series Display Port PHY -------------------------------------------------- - -Required properties: -- compatible : should be one of the following supported values: - - "samsung,exynos5250-dp-video-phy" - - "samsung,exynos5420-dp-video-phy" -- samsung,pmu-syscon: phandle for PMU system controller interface, used to - control pmu registers for power isolation. -- #phy-cells : from the generic PHY bindings, must be 0; - -Samsung S5P/Exynos SoC series USB PHY -------------------------------------------------- - -Required properties: -- compatible : should be one of the listed compatibles: - - "samsung,exynos3250-usb2-phy" - - "samsung,exynos4210-usb2-phy" - - "samsung,exynos4x12-usb2-phy" - - "samsung,exynos5250-usb2-phy" - - "samsung,exynos5420-usb2-phy" - - "samsung,s5pv210-usb2-phy" -- reg : a list of registers used by phy driver - - first and obligatory is the location of phy modules registers -- samsung,sysreg-phandle - handle to syscon used to control the system registers -- samsung,pmureg-phandle - handle to syscon used to control PMU registers -- #phy-cells : from the generic phy bindings, must be 1; -- clocks and clock-names: - - the "phy" clock is required by the phy module, used as a gate - - the "ref" clock is used to get the rate of the clock provided to the - PHY module - -Optional properties: -- vbus-supply: power-supply phandle for vbus power source - -The first phandle argument in the PHY specifier identifies the PHY, its -meaning is compatible dependent. For the currently supported SoCs (Exynos 4210 -and Exynos 4212) it is as follows: - 0 - USB device ("device"), - 1 - USB host ("host"), - 2 - HSIC0 ("hsic0"), - 3 - HSIC1 ("hsic1"), -Exynos3250 has only USB device phy available as phy 0. - -Exynos 4210 and Exynos 4212 use mode switching and require that mode switch -register is supplied. - -Example: - -For Exynos 4412 (compatible with Exynos 4212): - -usbphy: phy@125b0000 { - compatible = "samsung,exynos4x12-usb2-phy"; - reg = <0x125b0000 0x100>; - clocks = <&clock 305>, <&clock 2>; - clock-names = "phy", "ref"; - #phy-cells = <1>; - samsung,sysreg-phandle = <&sys_reg>; - samsung,pmureg-phandle = <&pmu_reg>; -}; - -Then the PHY can be used in other nodes such as: - -phy-consumer@12340000 { - phys = <&usbphy 2>; - phy-names = "phy"; -}; - -Refer to DT bindings documentation of particular PHY consumer devices for more -information about required PHYs and the way of specification. - -Samsung SATA PHY Controller ---------------------------- - -SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers. -Each SATA PHY controller should have its own node. - -Required properties: -- compatible : compatible list, contains "samsung,exynos5250-sata-phy" -- reg : offset and length of the SATA PHY register set; -- #phy-cells : must be zero -- clocks : must be exactly one entry -- clock-names : must be "sata_phyctrl" -- samsung,exynos-sataphy-i2c-phandle : a phandle to the I2C device, no arguments -- samsung,syscon-phandle : a phandle to the PMU system controller, no arguments - -Example: - sata_phy: sata-phy@12170000 { - compatible = "samsung,exynos5250-sata-phy"; - reg = <0x12170000 0x1ff>; - clocks = <&clock 287>; - clock-names = "sata_phyctrl"; - #phy-cells = <0>; - samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; - samsung,syscon-phandle = <&pmu_syscon>; - }; - -Device-Tree bindings for sataphy i2c client driver --------------------------------------------------- - -Required properties: -compatible: Should be "samsung,exynos-sataphy-i2c" -- reg: I2C address of the sataphy i2c device. - -Example: - - sata_phy_i2c:sata-phy@38 { - compatible = "samsung,exynos-sataphy-i2c"; - reg = <0x38>; - }; - -Samsung Exynos5 SoC series USB DRD PHY controller --------------------------------------------------- - -Required properties: -- compatible : Should be set to one of the following supported values: - - "samsung,exynos5250-usbdrd-phy" - for exynos5250 SoC, - - "samsung,exynos5420-usbdrd-phy" - for exynos5420 SoC. - - "samsung,exynos5433-usbdrd-phy" - for exynos5433 SoC. - - "samsung,exynos7-usbdrd-phy" - for exynos7 SoC. -- reg : Register offset and length of USB DRD PHY register set; -- clocks: Clock IDs array as required by the controller -- clock-names: names of clocks correseponding to IDs in the clock property; - Required clocks: - - phy: main PHY clock (same as USB DRD controller i.e. DWC3 IP clock), - used for register access. - - ref: PHY's reference clock (usually crystal clock), used for - PHY operations, associated by phy name. It is used to - determine bit values for clock settings register. - For Exynos5420 this is given as 'sclk_usbphy30' in CMU. - - optional clocks: Exynos5433 & Exynos7 SoC has now following additional - gate clocks available: - - phy_pipe: for PIPE3 phy - - phy_utmi: for UTMI+ phy - - itp: for ITP generation -- samsung,pmu-syscon: phandle for PMU system controller interface, used to - control pmu registers for power isolation. -- #phy-cells : from the generic PHY bindings, must be 1; - -For "samsung,exynos5250-usbdrd-phy" and "samsung,exynos5420-usbdrd-phy" -compatible PHYs, the second cell in the PHY specifier identifies the -PHY id, which is interpreted as follows: - 0 - UTMI+ type phy, - 1 - PIPE3 type phy, - -Example: - usbdrd_phy: usbphy@12100000 { - compatible = "samsung,exynos5250-usbdrd-phy"; - reg = <0x12100000 0x100>; - clocks = <&clock 286>, <&clock 1>; - clock-names = "phy", "ref"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <1>; - }; - -- aliases: For SoCs like Exynos5420 having multiple USB 3.0 DRD PHY controllers, - 'usbdrd_phy' nodes should have numbered alias in the aliases node, - in the form of usbdrdphyN, N = 0, 1... (depending on number of - controllers). -Example: - aliases { - usbdrdphy0 = &usb3_phy0; - usbdrdphy1 = &usb3_phy1; - }; - -Samsung Exynos SoC series PCIe PHY controller --------------------------------------------------- -Required properties: -- compatible : Should be set to "samsung,exynos5440-pcie-phy" -- #phy-cells : Must be zero -- reg : a register used by phy driver. - - First is for phy register, second is for block register. -- reg-names : Must be set to "phy" and "block". - -Example: - pcie_phy0: pcie-phy@270000 { - #phy-cells = <0>; - compatible = "samsung,exynos5440-pcie-phy"; - reg = <0x270000 0x1000>, <0x271000 0x40>; - reg-names = "phy", "block"; - }; diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml index 745c525ce6b9..a3cd45acea28 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml @@ -16,6 +16,7 @@ maintainers: properties: compatible: enum: + - socionext,uniphier-pro4-ahci-phy - socionext,uniphier-pxs2-ahci-phy - socionext,uniphier-pxs3-ahci-phy @@ -26,23 +27,82 @@ properties: const: 0 clocks: + minItems: 1 maxItems: 2 - clock-names: - oneOf: - - items: # for PXs2 - - const: link - - items: # for others - - const: link - - const: phy + clock-names: true resets: - maxItems: 2 + minItems: 2 + maxItems: 6 + + reset-names: true - reset-names: - items: - - const: link - - const: phy +allOf: + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pro4-ahci-phy + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: link + - const: gio + resets: + minItems: 6 + maxItems: 6 + reset-names: + items: + - const: link + - const: gio + - const: phy + - const: pm + - const: tx + - const: rx + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pxs2-ahci-phy + then: + properties: + clocks: + maxItems: 1 + clock-names: + const: link + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: link + - const: phy + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pxs3-ahci-phy + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: link + - const: phy + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: link + - const: phy required: - compatible diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml index 3e0566899041..b3ed2f74a414 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml @@ -19,6 +19,7 @@ properties: - socionext,uniphier-pro5-pcie-phy - socionext,uniphier-ld20-pcie-phy - socionext,uniphier-pxs3-pcie-phy + - socionext,uniphier-nx1-pcie-phy reg: maxItems: 1 @@ -30,28 +31,51 @@ properties: minItems: 1 maxItems: 2 - clock-names: - oneOf: - - items: # for Pro5 - - const: gio - - const: link - - const: link # for others + clock-names: true resets: minItems: 1 maxItems: 2 - reset-names: - oneOf: - - items: # for Pro5 - - const: gio - - const: link - - const: link # for others + reset-names: true socionext,syscon: $ref: /schemas/types.yaml#/definitions/phandle description: A phandle to system control to set configurations for phy +allOf: + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pro5-pcie-phy + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: gio + - const: link + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: gio + - const: link + else: + properties: + clocks: + maxItems: 1 + clock-names: + const: link + resets: + maxItems: 1 + reset-names: + const: link + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml index 479b203f7aa6..63dab914a48d 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml @@ -43,6 +43,9 @@ patternProperties: "#phy-cells": const: 0 + vbus-supply: + description: A phandle to the regulator for USB VBUS, only for USB host + required: - reg - "#phy-cells" diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml index a681cbc3b4ef..21e4414eea60 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml @@ -22,6 +22,7 @@ properties: - socionext,uniphier-pxs2-usb3-hsphy - socionext,uniphier-ld20-usb3-hsphy - socionext,uniphier-pxs3-usb3-hsphy + - socionext,uniphier-nx1-usb3-hsphy reg: maxItems: 1 @@ -30,27 +31,15 @@ properties: const: 0 clocks: - minItems: 1 + minItems: 2 maxItems: 3 - clock-names: - oneOf: - - const: link # for PXs2 - - items: # for PXs3 with phy-ext - - const: link - - const: phy - - const: phy-ext - - items: # for others - - const: link - - const: phy + clock-names: true resets: maxItems: 2 - reset-names: - items: - - const: link - - const: phy + reset-names: true vbus-supply: description: A phandle to the regulator for USB VBUS @@ -73,6 +62,77 @@ properties: required for each port, if any one is omitted, the trimming data of the port will not be set at all. +allOf: + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pro5-usb3-hsphy + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: gio + - const: link + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: gio + - const: link + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pxs2-usb3-hsphy + - socionext,uniphier-ld20-usb3-hsphy + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: link + - const: phy + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: link + - const: phy + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pxs3-usb3-hsphy + - socionext,uniphier-nx1-usb3-hsphy + then: + properties: + clocks: + minItems: 2 + maxItems: 3 + clock-names: + minItems: 2 + items: + - const: link + - const: phy + - const: phy-ext + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: link + - const: phy + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml index 41c0dd68ee25..4c26d2d2303d 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml @@ -23,6 +23,7 @@ properties: - socionext,uniphier-pxs2-usb3-ssphy - socionext,uniphier-ld20-usb3-ssphy - socionext,uniphier-pxs3-usb3-ssphy + - socionext,uniphier-nx1-usb3-ssphy reg: maxItems: 1 @@ -34,33 +35,88 @@ properties: minItems: 2 maxItems: 3 - clock-names: - oneOf: - - items: # for Pro4, Pro5 - - const: gio - - const: link - - items: # for PXs3 with phy-ext - - const: link - - const: phy - - const: phy-ext - - items: # for others - - const: link - - const: phy + clock-names: true resets: maxItems: 2 - reset-names: - oneOf: - - items: # for Pro4,Pro5 - - const: gio - - const: link - - items: # for others - - const: link - - const: phy + reset-names: true vbus-supply: - description: A phandle to the regulator for USB VBUS + description: A phandle to the regulator for USB VBUS, only for USB host + +allOf: + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pro4-usb3-ssphy + - socionext,uniphier-pro5-usb3-ssphy + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: gio + - const: link + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: gio + - const: link + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pxs2-usb3-ssphy + - socionext,uniphier-ld20-usb3-ssphy + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: link + - const: phy + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: link + - const: phy + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pxs3-usb3-ssphy + - socionext,uniphier-nx1-usb3-ssphy + then: + properties: + clocks: + minItems: 2 + maxItems: 3 + clock-names: + minItems: 2 + items: + - const: link + - const: phy + - const: phy-ext + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: link + - const: phy required: - compatible @@ -70,7 +126,6 @@ required: - clock-names - resets - reset-names - - vbus-supply additionalProperties: false diff --git a/Documentation/devicetree/bindings/phy/sunplus,sp7021-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/sunplus,sp7021-usb2-phy.yaml new file mode 100644 index 000000000000..069d422775bb --- /dev/null +++ b/Documentation/devicetree/bindings/phy/sunplus,sp7021-usb2-phy.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/sunplus,sp7021-usb2-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Sunplus SP7021 USB 2.0 PHY Controller + +maintainers: + - Vincent Shih <vincent.sunplus@gmail.com> + +properties: + compatible: + const: sunplus,sp7021-usb2-phy + + reg: + items: + - description: UPHY register region + - description: MOON4 register region + + reg-names: + items: + - const: phy + - const: moon4 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + "#phy-cells": + const: 0 + + nvmem-cell-names: + description: names corresponding to the nvmem cells of disconnect voltage + const: disc_vol + + nvmem-cells: + description: nvmem cell address of disconnect voltage + maxItems: 1 + + sunplus,disc-vol-addr-off: + $ref: /schemas/types.yaml#/definitions/uint32 + description: the otp address offset of disconnect voltage + +required: + - compatible + - reg + - reg-names + - clocks + - resets + - "#phy-cells" + - nvmem-cell-names + - nvmem-cells + - sunplus,disc-vol-addr-off + +additionalProperties: false + +examples: + - | + sp_uphy0: usb-phy@9c004a80 { + compatible = "sunplus,sp7021-usb2-phy"; + reg = <0x9c004a80 0x80>, <0x9c000248 0x10>; + reg-names = "phy", "moon4"; + clocks = <&clkc 0x3d>; + resets = <&rstc 0x2d>; + #phy-cells = <0>; + nvmem-cell-names = "disc_vol"; + nvmem-cells = <&disc_vol>; + sunplus,disc-vol-addr-off = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml index cbbf5e8b1197..8694b9eb52f9 100644 --- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml @@ -8,7 +8,7 @@ title: OMAP USB2 PHY maintainers: - Kishon Vijay Abraham I <kishon@ti.com> - - Roger Quadros <rogerq@ti.com> + - Roger Quadros <rogerq@kernel.org> properties: compatible: @@ -45,6 +45,10 @@ properties: syscon-phy-power: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the system control module + - description: register offset to power on/off the PHY description: phandle/offset pair. Phandle to the system control module and register offset to power on/off the PHY. diff --git a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml index ff8a6d9eb153..da7cac537e15 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml @@ -53,12 +53,25 @@ properties: - ti,am43xx-phy-gmii-sel - ti,dm814-phy-gmii-sel - ti,am654-phy-gmii-sel + - ti,j7200-cpsw5g-phy-gmii-sel reg: maxItems: 1 '#phy-cells': true + ti,qsgmii-main-ports: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + Required only for QSGMII mode. Array to select the port for + QSGMII main mode. Rest of the ports are selected as QSGMII_SUB + ports automatically. Any one of the 4 CPSW5G ports can act as the + main port with the rest of them being the QSGMII_SUB ports. + maxItems: 1 + items: + minimum: 1 + maximum: 4 + allOf: - if: properties: @@ -73,6 +86,18 @@ allOf: '#phy-cells': const: 1 description: CPSW port number (starting from 1) + + - if: + not: + properties: + compatible: + contains: + enum: + - ti,j7200-cpsw5g-phy-gmii-sel + then: + properties: + ti,qsgmii-main-ports: false + - if: properties: compatible: @@ -97,7 +122,7 @@ additionalProperties: false examples: - | - phy_gmii_sel: phy-gmii-sel@650 { + phy_gmii_sel: phy@650 { compatible = "ti,am3352-phy-gmii-sel"; reg = <0x650 0x4>; #phy-cells = <2>; diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index dcd63908aeae..2225925b6dad 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -16,19 +16,23 @@ properties: - ti,j721e-wiz-16g - ti,j721e-wiz-10g - ti,am64-wiz-10g + - ti,j7200-wiz-10g power-domains: maxItems: 1 clocks: - maxItems: 3 + minItems: 3 + maxItems: 4 description: clock-specifier to represent input to the WIZ clock-names: + minItems: 3 items: - const: fck - const: core_ref_clk - const: ext_ref_clk + - const: core_ref1_clk num-lanes: minimum: 1 @@ -79,10 +83,12 @@ properties: refclk-dig: type: object + additionalProperties: false description: | WIZ node should have subnode for refclk_dig to select the reference clock source for the reference clock used in the PHY and PMA digital logic. + deprecated: true properties: clocks: minItems: 2 @@ -105,12 +111,19 @@ properties: - assigned-clocks - assigned-clock-parents + ti,scm: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + phandle to System Control Module for syscon regmap access. + patternProperties: "^pll[0|1]-refclk$": type: object + additionalProperties: false description: | WIZ node should have subnodes for each of the PLLs present in the SERDES. + deprecated: true properties: clocks: maxItems: 2 @@ -133,9 +146,11 @@ patternProperties: "^cmn-refclk1?-dig-div$": type: object + additionalProperties: false description: WIZ node should have subnodes for each of the PMA common refclock provided by the SERDES. + deprecated: true properties: clocks: maxItems: 1 @@ -170,6 +185,16 @@ required: - "#reset-cells" - ranges +allOf: + - if: + properties: + compatible: + contains: + const: ti,j7200-wiz-10g + then: + required: + - ti,scm + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml index 6107880e5246..02b76f15e717 100644 --- a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml +++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml @@ -37,6 +37,12 @@ properties: max bit rate supported in bps minimum: 1 + mux-states: + description: + mux controller node to route the signals from controller to + transceiver. + maxItems: 1 + required: - compatible - '#phy-cells' @@ -53,4 +59,5 @@ examples: max-bitrate = <5000000>; standby-gpios = <&wakeup_gpio1 16 GPIO_ACTIVE_LOW>; enable-gpios = <&main_gpio1 67 GPIO_ACTIVE_HIGH>; + mux-states = <&mux0 1>; }; diff --git a/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml b/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml new file mode 100644 index 000000000000..51492fe738ec --- /dev/null +++ b/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/transmit-amplitude.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common PHY and network PCS transmit amplitude property binding + +description: + Binding describing the peak-to-peak transmit amplitude for common PHYs + and network PCSes. + +maintainers: + - Marek Behún <kabel@kernel.org> + +properties: + tx-p2p-microvolt: + description: + Transmit amplitude voltages in microvolts, peak-to-peak. If this property + contains multiple values for various PHY modes, the + 'tx-p2p-microvolt-names' property must be provided and contain + corresponding mode names. + + tx-p2p-microvolt-names: + description: | + Names of the modes corresponding to voltages in the 'tx-p2p-microvolt' + property. Required only if multiple voltages are provided. + + If a value of 'default' is provided, the system should use it for any PHY + mode that is otherwise not defined here. If 'default' is not provided, the + system should use manufacturer default value. + minItems: 1 + maxItems: 16 + items: + enum: + - default + + # ethernet modes + - sgmii + - qsgmii + - xgmii + - 1000base-x + - 2500base-x + - 5gbase-r + - rxaui + - xaui + - 10gbase-kr + - usxgmii + - 10gbase-r + - 25gbase-r + + # PCIe modes + - pcie + - pcie1 + - pcie2 + - pcie3 + - pcie4 + - pcie5 + - pcie6 + + # USB modes + - usb + - usb-ls + - usb-fs + - usb-hs + - usb-ss + - usb-ss+ + - usb-4 + + # storage modes + - sata + - ufs-hs + - ufs-hs-a + - ufs-hs-b + + # display modes + - lvds + - dp + - dp-rbr + - dp-hbr + - dp-hbr2 + - dp-hbr3 + - dp-uhbr-10 + - dp-uhbr-13.5 + - dp-uhbr-20 + + # camera modes + - mipi-dphy + - mipi-dphy-univ + - mipi-dphy-v2.5-univ + +dependencies: + tx-p2p-microvolt-names: [ tx-p2p-microvolt ] + +additionalProperties: true + +examples: + - | + phy: phy { + #phy-cells = <1>; + tx-p2p-microvolt = <915000>, <1100000>, <1200000>; + tx-p2p-microvolt-names = "2500base-x", "usb-hs", "usb-ss"; + }; diff --git a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml index 79906519c652..cefbc8b53a83 100644 --- a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml +++ b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/phy/xlnx,zynqmp-psgtr.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Xilinx ZynqMP Gigabit Transceiver PHY Device Tree Bindings +title: Xilinx ZynqMP Gigabit Transceiver PHY maintainers: - Laurent Pinchart <laurent.pinchart@ideasonboard.com> |