aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/allwinner (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-08arm64: dts: allwinner: beelink-gs1: Enable GPU OPPClément Péron1-0/+1
Enable GPU OPP table for Beelink GS1. Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220906153034.153321-6-peron.clem@gmail.com
2022-09-08arm64: dts: allwinner: h6: Add GPU OPP tableClément Péron1-0/+87
Add an Operating Performance Points table for the GPU to enable Dynamic Voltage & Frequency Scaling on the H6. The voltage range is set with minimal voltage set to the target and the maximal voltage set to 1.2V. This allow DVFS framework to work properly on board with fixed regulator. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220906153034.153321-4-peron.clem@gmail.com
2022-09-08arm64: dts: allwinner: h6: Add cooling map for GPUClément Péron1-2/+49
Add a simple cooling map for the GPU. This cooling map come from the vendor kernel 4.9 with a 2°C hysteresis added. Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220906153034.153321-3-peron.clem@gmail.com
2022-09-08arm64: dts: allwinner: a100: Add I2C DMA requestsSamuel Holland1-0/+12
The I2C controllers in the A100 SoC are all connected to the DMA engine. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220830020824.62288-4-samuel@sholland.org
2022-09-08arm64: dts: allwinner: a100: Add device node for DMA controllerYangtao Li1-0/+12
The A100 SoC has a DMA controller that supports 8 DMA channels to and from various peripherals. Add a device node for it. Signed-off-by: Yangtao Li <frank@allwinnertech.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220830020824.62288-3-samuel@sholland.org
2022-07-09arm64: dts: allwinner: h616: Add X96 Mate TV box supportAndre Przywara2-0/+178
The X96 Mate is an Allwinner H616 based TV box, featuring: - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU - 2GiB/4GiB RAM (fully usable!) - 16/32/64GiB eMMC - 100Mbps Ethernet (via embedded AC200 EPHY, not yet supported) - Unsupported Allwinner WiFi chip - 2 x USB 2.0 host ports - HDMI port - IR receiver - 5V/2A DC power supply via barrel plug Add a basic devicetree for it, with SD card and eMMC working, as well as serial and the essential peripherals, like the AXP PMIC. This DT is somewhat minimal, and should work on many other similar TV boxes with the Allwinner H616 chip. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220708105235.3983266-8-andre.przywara@arm.com
2022-07-09arm64: dts: allwinner: h616: Add OrangePi Zero 2 board supportAndre Przywara2-0/+214
The OrangePi Zero 2 is a development board with the new H616 SoC. It comes with the following features: - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU - 512MiB/1GiB DDR3 DRAM - AXP305 PMIC - Raspberry-Pi-1 compatible GPIO header - extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports - 1 USB 2.0 host port - 1 USB 2.0 type C port (power supply + OTG) - MicroSD slot - on-board 2MiB bootable SPI NOR flash - 1Gbps Ethernet port (via RTL8211F PHY) - micro-HDMI port - (yet) unsupported Allwinner WiFi/BT chip Add the devicetree file describing the currently supported features. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220708105235.3983266-7-andre.przywara@arm.com
2022-07-09arm64: dts: allwinner: Add Allwinner H616 .dtsi fileAndre Przywara1-0/+591
This (relatively) new SoC is similar to the H6, but drops the (broken) PCIe support and the USB 3.0 controller. It also gets the management controller removed, which in turn removes *some*, but not all of the devices formerly dedicated to the ARISC (CPUS). And while there is still the extra sunxi interrupt controller, the package lacks the corresponding NMI pin, so no interrupts for the PMIC. The reserved memory node is actually handled by Trusted Firmware now, but U-Boot fails to propagate this to a separately loaded DTB, so we keep it in here for now, until U-Boot learns to do this properly. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220708105235.3983266-4-andre.przywara@arm.com
2022-07-08arm64: dts: allwinner: pinephone: Enable internal HMIC biasSamuel Holland2-0/+8
Revisions 1.0 and 1.1 of the PinePhone mainboard do not have an external resistor connecting HBIAS to MIC2P. Enable the internal resistor to provide the necessary headeset microphone bias. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220621035452.60272-4-samuel@sholland.org
2022-07-05arm64: dts: allwinner: a100: Update I2C controller fallbackSamuel Holland1-0/+6
The I2C controllers in the A100 SoC are newer-generation hardware which includes an offload engine. Signify that by including the allwinner,sun8i-v536-i2c fallback compatible, as V536 is the first SoC with this generation of I2C controller. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220702052544.31443-2-samuel@sholland.org
2022-07-04arm64: dts: allwinner: a64: orangepi-win: Fix LED node nameSamuel Holland1-1/+1
"status" does not match any pattern in the gpio-leds binding. Rename the node to the preferred pattern. This fixes a `make dtbs_check` error. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220702132816.46456-1-samuel@sholland.org
2022-06-14arm64: dts: allwinner: align gpio-key node names with dtschemaKrzysztof Kozlowski4-8/+8
The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220609113911.380368-4-krzysztof.kozlowski@linaro.org
2022-06-13arm64: dts: allwinner: Use constants for RTC clock indexesSamuel Holland9-20/+24
The binding header provides descriptive names for the RTC clock indexes, since the indexes were arbitrarily chosen by the binding, not by the hardware. Let's use the names, so the meaning is clearer. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220607012438.18183-2-samuel@sholland.org
2022-05-03arm64: dts: allwinner: teres-i: Add GPIO port regulatorsHarald Geyer1-0/+8
Allwinner A64 SoC has separate supplies for PC, PD, PE, PG and PL. Signed-off-by: Harald Geyer <harald@ccbib.org> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220430191009.73946-1-harald@ccbib.org
2022-04-10arm64: dts: allwinner: a64: olinuxino: Enable audioPhilip Rinn1-0/+30
Enable the audio hardware on the Olimex A64-OLinuXino board family. Tested on the A64-OLinuXino-2Ge8G-IND variant. Signed-off-by: Philip Rinn <rinni@inventati.org> Acked-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220407155145.10891-1-rinni@inventati.org
2022-01-10Merge tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds11-132/+243
Pull ARM SoC devicetree updates from Arnd Bergmann: "As usual, this is the bulk of the updates for the SoC tree, adding more devices to existing files, addressing issues from ever improving automated checking, and fixing minor issues. The most interesting bits as usual are the new platforms. All the newly supported SoCs belong into existing families this time: - Qualcomm gets support for two newly announced platforms, both of which can now work in production environments: the SDX65 5G modem that can run a minimal Linux on its Cortex-A7 core, and the Snapdragon 8 Gen 1, their latest high-end phone SoC. - Renesas adds support for R-Car S4-8, the most recent automotive Server/Communication SoC. - TI adds support for J721s2, a new automotive SoC in the K3 family. - Mediatek MT7986a/b is a SoC used in Wifi routers, the latest generation following their popular MT76xx series. Only basic support is added for now. - NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8 series. - TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we have supported for a long time. New boards with the existing SoCs include - Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers - AT91/SAMA5 based evaluation board - NXP gains twenty new development and industrial boards for their i.MX and Layerscape SoCs - Intel IXP4xx now supports the final two machines in device tree that were previously only supported in old style board files. - Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while MT8183 is used in the Acer Chromebook 314. - Qualcomm gains support for the reference machines using the two new SoCs, plus a number of Chromebook variants and phones based on the Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia devices and the Microsoft Surface Duo 2. - ST STM32 now supports the Engicam i.Core STM32MP1 carrier board. - Tegra now boots various older Android devices based on 32-bit chips out of the box, including a number of ASUS Transformer tablets. There is also a new Jetson AGX Orin developer kit. - Apple support adds the missing device trees for all the remaining M1 Macbook and iMac variants, though not yet the M1 Pro/Max versions. - Allwinner now supports another version of the Tanix TX6 set-top box based on the H6 SoC. - Broadcom gains support for the Netgear RAXE500 Wireless router based on BCM4908" * tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits) Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U" arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX arm64: dts: qcom: sm8450-qrd: Enable USB nodes arm64: dts: qcom: sm8450: Add usb nodes ARM: dts: aspeed: add LCLK setting into LPC KCS nodes dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property ARM: dts: aspeed: add LCLK setting into LPC IBT node ARM: dts: aspeed: p10: Add TPM device ARM: dts: aspeed: p10: Enable USB host ports ARM: dts: aspeed: Add TYAN S8036 BMC machine ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config ARM: dts: aspeed: Adding Facebook Bletchley BMC ARM: dts: aspeed: g220a: Enable secondary flash ARM: dts: Add openbmc-flash-layout-64-alt.dtsi ARM: dts: aspeed: Add secure boot controller node dt-bindings: aspeed: Add Secure Boot Controller bindings ARM: dts: Remove "spidev" nodes dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850 dt-bindings: arm: samsung: Document E850-96 board binding dt-bindings: Add vendor prefix for WinLink ...
2021-12-16arm64: dts: allwinner: h6: Add Hantro G2 nodeJernej Skrabec1-0/+9
H6 SoC has a second VPU, dedicated to VP9 decoding. It's a slightly older design, though. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211129182633.480021-10-jernej.skrabec@gmail.com
2021-12-03arm64: dts: allwinner: h6: tanix-tx6: Enable bluetoothJernej Skrabec1-0/+14
Tanix TX6 comes either with RTL8822BS or RTL8822CS wifi+bt combo module. Wifi part is already enabled in tanix DTSI. Let's enable also bluetooth. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-12-03arm64: dts: allwinner: h6: tanix: Add MMC1 nodeJernej Skrabec1-0/+16
Both, Tanix TX6 and Tanix TX6 mini, have SDIO wifi module, albeit different. However, driver can be autoprobed via SDIO ID. Add MMC1 node, so kernel can discover wifi module and load driver for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-12-03arm64: dts: allwinner: h6: Add Tanix TX6 mini dtsJernej Skrabec2-0/+16
Tanix TX6 mini is less capable version of Tanix TX6 although it comes with some features not present on Tanix TX6. Basic specs: - H6 SoC - 2 GiB DDR3 RAM - HDMI - SPDIF - 2x USB - analogue audio - CVBS - SD card - IR remote - LED display - fast ethernet - XR819 wifi - 16 GiB eMMC Currently supported features doesn't differ that much from Tanix TX6, but that will change soon. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-12-03arm64: dts: allwinner: h6: tanix-tx6: Split to DT and DTSIJernej Skrabec2-163/+174
There is another very similar device to Tanix TX6, namely Tanix TX6 mini. Because most of the board design is shared, it makes sense to have common nodes in DTSI file. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-11-23arm64: dts: allwinner: a64: Update MBUS nodeSamuel Holland1-2/+8
In order to support memory dynamic frequency scaling (MDFS), the MBUS binding now requires enumerating more resources. Provide them in the device tree. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211118031841.42315-6-samuel@sholland.org
2021-11-23ARM: dts: sunxi: h3/h5: Update MBUS nodeSamuel Holland1-0/+4
In order to support memory dynamic frequency scaling (MDFS), the MBUS binding now requires enumerating more resources. Provide them in the device tree. Since the H3 and H5 have different clock divider limits, they need separate compatibles. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211118031841.42315-5-samuel@sholland.org
2021-11-22arm64: dts: allwinner: a64: Add CEC clock to HDMIJernej Skrabec1-2/+2
Experimentation determined that HDMI CEC controller inside DW HDMI block depends on 32k clock from RTC. If this clock is tampered with, HDMI CEC communication starts or stops working, depending on situation. SoC user manual doesn't say anything about CEC, so this was overlooked. Fix this by adding dependency to RTC 32k clock. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211120073448.32480-2-jernej.skrabec@gmail.com
2021-11-22arm64: dts: allwinner: h6: tanix-tx6: Add I2C nodeJernej Skrabec1-0/+8
Tanix TX6 has a LED display driven by FD650. Currently there is no Linux driver nor any binding for it. However, we can at least provide I2C node in DT, so user space scripts or programs can manually control it. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211121115002.693329-1-jernej.skrabec@gmail.com
2021-11-17arm64: dts: allwinner: orangepi-zero-plus: fix PHY modeRobert Marko1-1/+1
Orange Pi Zero Plus uses a Realtek RTL8211E RGMII Gigabit PHY, but its currently set to plain RGMII mode meaning that it doesn't introduce delays. With this setup, TX packets are completely lost and changing the mode to RGMII-ID so the PHY will add delays internally fixes the issue. Fixes: a7affb13b271 ("arm64: allwinner: H5: Add Xunlong Orange Pi Zero Plus") Acked-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Ron Goossens <rgoossens@gmail.com> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211117140222.43692-1-robert.marko@sartura.hr
2021-11-16arm64: dts: allwinner: h6: tanix-tx6: Add SPDIFJernej Skrabec1-0/+22
Tanix TX6 board has SPDIF connector in form of 3.5 mm jack. Add support for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211115201112.452696-1-jernej.skrabec@gmail.com
2021-11-15arm64: dts: allwinner: add 'chassis-type' propertyArnaud Ferraris4-0/+5
A new 'chassis-type' root node property has recently been approved for the device-tree specification, in order to provide a simple way for userspace to detect the device form factor and adjust their behavior accordingly. This patch fills in this property for end-user devices (such as laptops, smartphones and tablets) based on Allwinner ARM64 processors. Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211016102025.23346-2-arnaud.ferraris@collabora.com
2021-11-03Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds12-20/+71
Pull ARM SoC DT updates from Arnd Bergmann: "This is a rather large update for the ARM devicetree files, after a few quieter releases, with 775 total commits and 47 branches pulled into this one. There are 5 new SoC types plus some minor variations, and a total of 60 new machines, so I'm limiting the summary to the main noteworthy items: - Apple M1 gain support for PCI and pinctrl, getting a bit closer to a usable system out of the box. - Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as SM7225, 11 new smartphones, and three additional Chromebooks, and improvements all over the place. - Samsung gains support for ExynosAutov9, an automotive version of their smartphone SoC, but otherwise no major changes. - Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number of improvements for the recently added SAMA7 family. The LAN966 SoC that was added in the platform code does not have dts files yet. Two board files are added for the older at91sam9g20 SoC - Aspeed supports two additional server boards using their AST2600 as BMC, and improves support for qemu models - Rockchip RK3566/RK3688 gets added, along with six new development boards using RK3328/RK3399/RK3566, and one Chromebook tablet. - Two NAS boxes are added using the ARMv4 based Gemini platform - One new board is added to the Intel Arria SoC FPGA family - Marvell adds one network switch based on Armada 381 and the new MOCHAbin 7040 development board - NXP adds support for the S32G2 automotive SoC, two imx6 based ebook readers, and three additional development boards, which is notably less than their usual additions, but they also gain improvements to their many existing boards - STmicroelectronics adds their stm32mp13 SoC family along with a reference board - Renesas adds new versions of their R-Car Gen3 SoCs and many updates for their older generations - Broadcom adds support for a number of Cisco Meraki wireless controllers, along with two new boards and other updates for BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards - Mediatek improves support for the MT81xx SoCs used in Chromebooks as well as the MT76xx networking SoCs - NVIDIA adds a number of cleanups and additional support for more hardware on the already supported machines - TI K3 adds support for three new boards along with cleanups - Toshiba adds one board for the Visconti family - Xilinx adds five new ZynqMP based machines - Amlogic support is added for the Radxa Zero and two Jethub home automation controllers, along with changes to other machines - Rob Herring continues his work on fixing dtc warnings all over the tree. - Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon, Ux500, Unisoc" * tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits) arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address arm64: dts: apple: t8103: Add root port interrupt routing arm64: dts: apple: t8103: Add PCIe DARTs arm64: apple: Add PCIe node arm64: apple: Add pinctrl nodes ARM: dts: arm: Update ICST clock nodes 'reg' and node names ARM: dts: arm: Update register-bit-led nodes 'reg' and node names arm64: dts: exynos: add chipid node for exynosautov9 SoC ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors" arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property arm64: dts: qcom: sm8350: Add CPU topology and idle-states arm64: dts: qcom: Drop unneeded extra device-specific includes arm64: dts: qcom: msm8916: Drop standalone smem node arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: msm8916-asus-z00l: Add SDCard arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node ...
2021-10-14arm64: dts: allwinner: NanoPi R1S H5: Add generic compatible string for I2C EEPROMChukun Pan1-1/+8
The 'microchip,24c02' compatible does not match the at24 driver, so add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Also set this eeprom to read-only mode because it stores the mac address of the onboard usb network card. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211010135017.6855-2-amadeus@jmu.edu.cn
2021-09-16arm64: dts: allwinner: pinetab: Add HDMI supportDang Huynh1-0/+26
This patch enables HDMI display on PINE64 PineTab. The PineTab has a HDMI Type C (mini) port. Signed-off-by: Dang Huynh <danct12@disroot.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210914193732.3047668-1-danct12@disroot.org
2021-09-13arm64: dts: allwinner: a64: Add GPU opp tableJernej Skrabec1-0/+17
GPU on A64 currently runs at default frequency, which is 297 MHz. This is a bit low in some cases and noticeable lag can be observed in GPU rendered UIs. GPU is capable to run at 432 MHz. Add GPU OPP table. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210912095032.2397824-1-jernej.skrabec@gmail.com
2021-09-13arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet nodeClément Bœsch1-1/+1
RX and TX delay are provided by ethernet PHY. Reflect that in ethernet node. Fixes: 44a94c7ef989 ("arm64: dts: allwinner: H5: Restore EMAC changes") Signed-off-by: Clément Bœsch <u@pkh.me> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210905002027.171984-1-u@pkh.me
2021-09-13arm64: dts: allwinner: teres-i: Remove wakekup-source from the PMICMaxime Ripard1-1/+0
Neither the binding nor the driver make any use of the wakeup-source property for the AXP803. Remove it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20210901091852.479202-53-maxime@cerno.tech
2021-09-13arm64: dts: allwinner: teres-i: Add missing regMaxime Ripard1-0/+2
The anx6345 bridge mandates that the input port is named port@0. Since we have a unit-address, this implies that we need a reg property with the same value, but it was found to be missing in the Teres-I device tree. Make sure it's there. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20210901091852.479202-52-maxime@cerno.tech
2021-09-13arm64: dts: allwinner: pinetab: Change regulator node name to avoid warningMaxime Ripard1-1/+1
The fixed regulator clock name has a unit address, but no reg property, which generates a warning in DTC. Change its name to remove its useless unit address. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20210901091852.479202-51-maxime@cerno.tech
2021-09-13arm64: dts: allwinner: a100: Fix thermal zone node nameMaxime Ripard1-3/+3
The thermal zones one the A100 are called $device-thermal-zone. However, the thermal zone binding explicitly requires that zones are called *-thermal. Let's fix it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20210901091852.479202-50-maxime@cerno.tech
2021-09-13arm64: dts: allwinner: h6: Fix de3 parent clocks orderingMaxime Ripard1-4/+4
While it doesn't really matter from a functional point of view in this driver's case, it's usually a good practice to list the clocks in a driver in the same driver across all its users. The H6 is using the inverse order than all the other users, so let's make it consistent. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20210901091852.479202-49-maxime@cerno.tech
2021-09-13arm64: dts: allwinner: h5: Fix GPU thermal zone node nameMaxime Ripard1-1/+1
The GPU thermal zone is named gpu_thermal. However, the underscore is an invalid character for a node name and the thermal zone binding explicitly requires that zones are called *-thermal. Let's fix it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20210901091852.479202-48-maxime@cerno.tech
2021-09-13ARM: dts: sunxi: Fix the SPI NOR node namesMaxime Ripard1-1/+1
According to the SPI NOR bindings, the flash node names are supposed to be flash@<address>. Let's fix our users to use that new scheme. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20210901091852.479202-44-maxime@cerno.tech
2021-09-13ARM: dts: sunxi: Fix OPPs node nameMaxime Ripard3-3/+3
The operating-points-v2 nodes are named inconsistently, but mostly either opp_table0 or gpu-opp-table. However, the underscore is an invalid character for a node name and the thermal zone binding explicitly requires that zones are called opp-table-*. Let's fix it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20210901091852.479202-43-maxime@cerno.tech
2021-09-13ARM: dts: sunxi: Rename gpio pinctrl namesMaxime Ripard1-2/+2
We've had a pinctrl node name convention for a while now, let's follow it for the AXP pinctrl nodes as well. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20210901091852.479202-41-maxime@cerno.tech
2021-09-13ARM: dts: sunxi: Rename power-supply namesMaxime Ripard1-3/+3
The name of our PMIC power supply names conflict with the generic regulator supply check that matches anything called *-supply, including the nodes, and then makes sure it's a phandle. A node is obviously not a phandle, so let's change our power supplies names to avoid any conflict. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20210901091852.479202-40-maxime@cerno.tech
2021-07-26arm64: dts: allwinner: h6: tanix-tx6: enable emmcJernej Skrabec1-0/+10
Tanix TX6 has 32 GiB eMMC. Add a node for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210722161220.51181-4-jernej.skrabec@gmail.com
2021-07-26arm64: dts: allwinner: h6: tanix-tx6: Add PIO power suppliesJernej Skrabec1-0/+13
While there is no publicly available schematic of this board, it's not hard to determine voltage of GPIO port C, D and G (only ones which can be set). Port C and G are used for MMC/SDIO communication, so they use 1.8 V power supply. It's not clear if port D is even used, but if it is, it's pretty safe to assume it uses 3.3 V power supply. Value read from PIO Group Withstand Voltage Mode Select register from within pre-installed Android agrees with that assesment. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210722161220.51181-3-jernej.skrabec@gmail.com
2021-07-26arm64: dts: allwinner: h6: tanix-tx6: Fix regulator node namesJernej Skrabec1-2/+2
Regulator node names don't reflect class of the device. Fix that by prefixing names with "regulator-". Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210722161220.51181-2-jernej.skrabec@gmail.com
2021-07-10Merge tag 'arm-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds5-18/+274
Pull ARM devicetree updates from Olof Johansson: "Like always, the DT branch is sizable. There are numerous additions and fixes to existing platforms, but also a handful of new ones introduced. Less than some other releases, but there's been significant work on cleanups, refactorings and device enabling on existing platforms. A non-exhaustive list of new material: - Refactoring of BCM2711 dtsi structure to add support for the Raspberry Pi 400 - Rockchip: RK3568 SoC and EVB, video codecs for rk3036/3066/3188/322x - Qualcomm: SA8155p Automotive platform (SM8150 derivative), SM8150/8250 enhancements and support for Sony Xperia 1/1II and 5/5II - TI K3: PCI/USB3 support on AM64-sk boards, R5 remoteproc definitions - TI OMAP: Various cleanups - Tegra: Audio support for Jetson Xavier NX, SMMU support on Tegra194 - Qualcomm: lots of additions for peripherals across several SoCs, and new support for Microsoft Surface Duo (SM8150-based), Huawei Ascend G7. - i.MX: Numerous additions of features across SoCs and boards. - Allwinner: More device bindings for V3s, Forlinx OKA40i-C and NanoPi R1S H5 boards - MediaTek: More device bindings for mt8167, new Chromebook system variants for mt8183 - Renesas: RZ/G2L SoC and EVK added - Amlogic: BananaPi BPI-M5 board added" * tag 'arm-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (511 commits) arm64: dts: rockchip: add basic dts for RK3568 EVB arm64: dts: rockchip: add core dtsi for RK3568 SoC arm64: dts: rockchip: add generic pinconfig settings used by most Rockchip socs ARM: dts: rockchip: add vpu and vdec node for RK322x ARM: dts: rockchip: add vpu nodes for RK3066 and RK3188 ARM: dts: rockchip: add vpu node for RK3036 arm64: dts: ipq8074: Add QUP6 I2C node arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly arm64: dts: rockchip: Sort rk3399 firefly pinmux entries arm64: dts: rockchip: add infrared receiver node to RK3399 Firefly arm64: dts: rockchip: add SPDIF node for rk3399-firefly arm64: dts: rockchip: Add Rotation Property for OGA Panel arm64: dts: qcom: sc7180: bus votes for eMMC and SD card arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen arm64: dts: qcom: sm8250-edo: Enable GPI DMA arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI arm64: dts: qcom: sm8250-edo: Enable PCIe ...
2021-06-10arm64: dts: allwinner: a64-sopine-baseboard: change RGMII mode to TXIDIcenowy Zheng1-1/+1
Although the schematics of Pine A64-LTS and SoPine Baseboard shows both the RX and TX internal delay are enabled, they're using the same broken RTL8211E chip batch with Pine A64+, so they should use TXID instead, not ID. In addition, by checking the real components soldered on both a SoPine Baseboard and a Pine A64-LTS, RX delay is not enabled (GR69 soldered and GR70 NC) despite the schematics says it's enabled. It's a common situation for Pine64 boards that the NC information on schematics is not the same with the board. So the RGMII delay mode should be TXID on these boards. Fixes: c2b111e59a7b ("arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210609083843.463750-1-icenowy@aosc.io
2021-05-24arm64: dts: allwinner: pinephone: Set audio card nameArnaud Ferraris1-0/+1
Add the "PinePhone" name to the sound card: this will make upstreaming an ALSA UCM config easier as we can use a unique name. It also avoids an issue where the default card name is truncated. Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com> [Samuel: Split out change, updated commit message] Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210430035859.3487-8-samuel@sholland.org
2021-05-18arm64: dts: allwinner: h5: Add NanoPi R1S H5 supportChukun Pan2-0/+196
The NanoPi R1S H5 is a open source board made by FriendlyElec. It has the following features: - Allwinner H5, Quad-core Cortex-A53 - 512MB DDR3 RAM - 10/100/1000M Ethernet x 2 - RTL8189ETV WiFi 802.11b/g/n - USB 2.0 host port (A) - MicroSD Slot - Serial Debug Port - 5V 2A DC power-supply Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210516163523.9484-2-amadeus@jmu.edu.cn
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.