| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There are cases where a context synchronization event is necessary
between an IRQ being raised and being handled, and there are races such
that we cannot rely upon the exception entry being subsequent to the
interrupt being raised. To fix this, we place an ISB between a read of
IAR and the subsequent invocation of an IRQ handler.
When EOI mode 1 is in use, we need to EOI an interrupt prior to invoking
its handler, and we have a write to EOIR for this. As this write to EOIR
requires an ISB, and this is provided by the gic_write_eoir() helper, we
omit the usual ISB in this case, with the logic being:
| if (static_branch_likely(&supports_deactivate_key))
| gic_write_eoir(irqnr);
| else
| isb();
This is somewhat opaque, and it would be a little clearer if there were
an unconditional ISB, with only the write to EOIR being conditional,
e.g.
| if (static_branch_likely(&supports_deactivate_key))
| write_gicreg(irqnr, ICC_EOIR1_EL1);
|
| isb();
This patch rewrites the code that way, with this logic factored into a
new helper function with comments explaining what the ISB is for, as
were originally laid out in commit:
39a06b67c2c1256b ("irqchip/gic: Ensure we have an ISB between ack and ->handle_irq")
Note that since then, we removed the IAR polling in commit:
342677d70ab92142 ("irqchip/gic-v3: Remove acknowledge loop")
... which removed one of the two race conditions.
For consistency, other portions of the driver are made to manipulate
EOIR using write_gicreg() and explcit ISBs, and the gic_write_eoir()
helper function is removed.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220513133038.226182-3-mark.rutland@arm.com
|
|
When a IAR register read races with a GIC interrupt RELEASE event,
GIC-CPU interface could wrongly return a valid INTID to the CPU
for an interrupt that is already released(non activated) instead of 0x3ff.
As a side effect, an interrupt handler could run twice, once with
interrupt priority and then with idle priority.
As a workaround, gic_read_iar is updated so that it will return a
valid interrupt ID only if there is a change in the active priority list
after the IAR read on all the affected Silicons.
Since there are silicon variants where both 23154 and 38545 are applicable,
workaround for erratum 23154 has been extended to address both of them.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220307143014.22758-1-lcherian@marvell.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Although naming across the codebase isn't that consistent, it
tends to follow certain patterns. Moreover, the term "flush"
isn't defined in the Arm Architecture reference manual, and might
be interpreted to mean clean, invalidate, or both for a cache.
Rename arm64-internal functions to make the naming internally
consistent, as well as making it consistent with the Arm ARM, by
specifying whether it applies to the instruction, data, or both
caches, whether the operation is a clean, invalidate, or both.
Also specify which point the operation applies to, i.e., to the
point of unification (PoU), coherency (PoC), or persistence
(PoP).
This commit applies the following sed transformation to all files
under arch/arm64:
"s/\b__flush_cache_range\b/caches_clean_inval_pou_macro/g;"\
"s/\b__flush_icache_range\b/caches_clean_inval_pou/g;"\
"s/\binvalidate_icache_range\b/icache_inval_pou/g;"\
"s/\b__flush_dcache_area\b/dcache_clean_inval_poc/g;"\
"s/\b__inval_dcache_area\b/dcache_inval_poc/g;"\
"s/__clean_dcache_area_poc\b/dcache_clean_poc/g;"\
"s/\b__clean_dcache_area_pop\b/dcache_clean_pop/g;"\
"s/\b__clean_dcache_area_pou\b/dcache_clean_pou/g;"\
"s/\b__flush_cache_user_range\b/caches_clean_inval_user_pou/g;"\
"s/\b__flush_icache_all\b/icache_inval_all_pou/g;"
Note that __clean_dcache_area_poc is deliberately missing a word
boundary check at the beginning in order to match the efistub
symbols in image-vars.h.
Also note that, despite its name, __flush_icache_range operates
on both instruction and data caches. The name change here
reflects that.
No functional change intended.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210524083001.2586635-19-tabba@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
To be consistent with other functions with similar names and
functionality in cacheflush.h, cache.S, and cachetlb.rst, change
to specify the range in terms of start and end, as opposed to
start and size.
No functional change intended.
Reported-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210524083001.2586635-13-tabba@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Apple SoCs (A11 and newer) have some interrupt sources hardwired to the
FIQ line. We implement support for this by simply treating IRQs and FIQs
the same way in the interrupt vectors.
To support these systems, the FIQ mask bit needs to be kept in sync with
the IRQ mask bit, so both kinds of exceptions are masked together. No
other platforms should be delivering FIQ exceptions right now, and we
already unmask FIQ in normal process context, so this should not have an
effect on other systems - if spurious FIQs were arriving, they would
already panic the kernel.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Hector Martin <marcan@marcan.st>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210315115629.57191-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The GIC's internal view of the priority mask register and the assigned
interrupt priorities are based on whether GIC security is enabled and
whether firmware routes Group 0 interrupts to EL3. At the moment, we
support priority masking when ICC_PMR_EL1 and interrupt priorities are
either both modified by the GIC, or both left unchanged.
Trusted Firmware-A's default interrupt routing model allows Group 0
interrupts to be delivered to the non-secure world (SCR_EL3.FIQ == 0).
Unfortunately, this is precisely the case that the GIC driver doesn't
support: ICC_PMR_EL1 remains unchanged, but the GIC's view of interrupt
priorities is different from the software programmed values.
Support pseudo-NMIs when SCR_EL3.FIQ == 0 by using a different value to
mask regular interrupts. All the other values remain the same.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200912153707.667731-3-alexandru.elisei@arm.com
|
|
The "inline" keyword is a hint for the compiler to inline a function. The
functions system_uses_irq_prio_masking() and gic_write_pmr() are used by
the code running at EL2 on a non-VHE system, so mark them as
__always_inline to make sure they'll always be part of the .hyp.text
section.
This fixes the following splat when trying to run a VM:
[ 47.625273] Kernel panic - not syncing: HYP panic:
[ 47.625273] PS:a00003c9 PC:0000ca0b42049fc4 ESR:86000006
[ 47.625273] FAR:0000ca0b42049fc4 HPFAR:0000000010001000 PAR:0000000000000000
[ 47.625273] VCPU:0000000000000000
[ 47.647261] CPU: 1 PID: 217 Comm: kvm-vcpu-0 Not tainted 5.8.0-rc1-ARCH+ #61
[ 47.654508] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT)
[ 47.661139] Call trace:
[ 47.663659] dump_backtrace+0x0/0x1cc
[ 47.667413] show_stack+0x18/0x24
[ 47.670822] dump_stack+0xb8/0x108
[ 47.674312] panic+0x124/0x2f4
[ 47.677446] panic+0x0/0x2f4
[ 47.680407] SMP: stopping secondary CPUs
[ 47.684439] Kernel Offset: disabled
[ 47.688018] CPU features: 0x240402,20002008
[ 47.692318] Memory Limit: none
[ 47.695465] ---[ end Kernel panic - not syncing: HYP panic:
[ 47.695465] PS:a00003c9 PC:0000ca0b42049fc4 ESR:86000006
[ 47.695465] FAR:0000ca0b42049fc4 HPFAR:0000000010001000 PAR:0000000000000000
[ 47.695465] VCPU:0000000000000000 ]---
The instruction abort was caused by the code running at EL2 trying to fetch
an instruction which wasn't mapped in the EL2 translation tables. Using
objdump showed the two functions as separate symbols in the .text section.
Fixes: 85738e05dc38 ("arm64: kvm: Unmask PMR before entering guest")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200618171254.1596055-1-alexandru.elisei@arm.com
|
|
KVM/arm fixes for 5.6, take #1
- Fix compilation on 32bit
- Move VHE guest entry/exit into the VHE-specific entry code
- Make sure all functions called by the non-VHE HYP code is tagged as __always_inline
|
|
On non VHE CPUs, KVM's __hyp_text contains code run at EL2 while the rest
of the kernel runs at EL1. This code lives in its own section with start
and end markers so we can map it to EL2.
The compiler may decide not to inline static-inline functions from the
header file. It may also decide not to put these out-of-line functions
in the same section, meaning they aren't mapped when called at EL2.
Clang-9 does exactly this with __kern_hyp_va() and a few others when
x18 is reserved for the shadow call stack. Add the additional __always_
hint to all the static-inlines that are called from a hyp file.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200220165839.256881-2-james.morse@arm.com
----
kvm_get_hyp_vector() pulls in all the regular per-cpu accessors
and this_cpu_has_cap(), fortunately its only called for VHE.
|
|
V{PEND,PROP}BASER registers are actually located in VLPI_base frame
of the *redistributor*. Rename their accessors to reflect this fact.
No functional changes.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200206075711.1275-7-yuzenghui@huawei.com
|
|
GICv4.1 defines a new VPE table that is potentially shared between
both the ITSs and the redistributors, following complicated affinity
rules.
To make things more confusing, the programming of this table at
the redistributor level is reusing the GICv4.0 GICR_VPROPBASER register
for something completely different.
The code flow is somewhat complexified by the need to respect the
affinities required by the HW, meaning that tables can either be
inherited from a previously discovered ITS or redistributor.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20191224111055.11836-6-maz@kernel.org
|
|
On a system with two security states, if SCR_EL3.FIQ is cleared,
non-secure IRQ priorities get shifted to fit the secure view but
priority masks aren't.
On such system, it turns out that GIC_PRIO_IRQON masks the priority of
normal interrupts, which obviously ends up in a hang.
Increase GIC_PRIO_IRQON value (i.e. lower priority) to make sure
interrupts are not blocked by it.
Cc: Oleg Nesterov <oleg@redhat.com>
Fixes: bd82d4bd21880b7c ("arm64: Fix incorrect irqflag restore for priority masking")
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Thierry <julien.thierry.kdev@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[will: fixed Fixes: tag]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Pull arm64 updates from Catalin Marinas:
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
- Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
manage the permissions of executable vmalloc regions more strictly
- Slight performance improvement by keeping softirqs enabled while
touching the FPSIMD/SVE state (kernel_neon_begin/end)
- Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new
XAFLAG and AXFLAG instructions for floating point comparison flags
manipulation) and FRINT (rounding floating point numbers to integers)
- Re-instate ARM64_PSEUDO_NMI support which was previously marked as
BROKEN due to some bugs (now fixed)
- Improve parking of stopped CPUs and implement an arm64-specific
panic_smp_self_stop() to avoid warning on not being able to stop
secondary CPUs during panic
- perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
platforms
- perf: DDR performance monitor support for iMX8QXP
- cache_line_size() can now be set from DT or ACPI/PPTT if provided to
cope with a system cache info not exposed via the CPUID registers
- Avoid warning on hardware cache line size greater than
ARCH_DMA_MINALIGN if the system is fully coherent
- arm64 do_page_fault() and hugetlb cleanups
- Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
- Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the
'arm_boot_flags' introduced in 5.1)
- CONFIG_RANDOMIZE_BASE now enabled in defconfig
- Allow the selection of ARM64_MODULE_PLTS, currently only done via
RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
over into the vmalloc area
- Make ZONE_DMA32 configurable
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
perf: arm_spe: Enable ACPI/Platform automatic module loading
arm_pmu: acpi: spe: Add initial MADT/SPE probing
ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
ACPI/PPTT: Modify node flag detection to find last IDENTICAL
x86/entry: Simplify _TIF_SYSCALL_EMU handling
arm64: rename dump_instr as dump_kernel_instr
arm64/mm: Drop [PTE|PMD]_TYPE_FAULT
arm64: Implement panic_smp_self_stop()
arm64: Improve parking of stopped CPUs
arm64: Expose FRINT capabilities to userspace
arm64: Expose ARMv8.5 CondM capability to userspace
arm64: defconfig: enable CONFIG_RANDOMIZE_BASE
arm64: ARM64_MODULES_PLTS must depend on MODULES
arm64: bpf: do not allocate executable memory
arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages
arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP
arm64: module: create module allocations without exec permissions
arm64: Allow user selection of ARM64_MODULE_PLTS
acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
arm64: Allow selecting Pseudo-NMI again
...
|
|
When using IRQ priority masking to disable interrupts, in order to deal
with the PSR.I state, local_irq_save() would convert the I bit into a
PMR value (GIC_PRIO_IRQOFF). This resulted in local_irq_restore()
potentially modifying the value of PMR in undesired location due to the
state of PSR.I upon flag saving [1].
In an attempt to solve this issue in a less hackish manner, introduce
a bit (GIC_PRIO_IGNORE_PMR) for the PMR values that can represent
whether PSR.I is being used to disable interrupts, in which case it
takes precedence of the status of interrupt masking via PMR.
GIC_PRIO_PSR_I_SET is chosen such that (<pmr_value> |
GIC_PRIO_PSR_I_SET) does not mask more interrupts than <pmr_value> as
some sections (e.g. arch_cpu_idle(), interrupt acknowledge path)
requires PMR not to mask interrupts that could be signaled to the
CPU when using only PSR.I.
[1] https://www.spinics.net/lists/arm-kernel/msg716956.html
Fixes: 4a503217ce37 ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking")
Cc: <stable@vger.kernel.org> # 5.1.x-
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Pouloze <suzuki.poulose@arm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Implement architecture specific primitive allowing the GICv3 driver to
use priorities to mask interrupts.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Mask the IRQ priority through PMR and re-enable IRQs at CPU level,
allowing only higher priority interrupts to be received during interrupt
handling.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add helper functions to access system registers related to interrupt
priorities: PMR and RPR.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We would like to reset the Group-0 Active Priority Registers
at boot time if they are available to us. They would be available
if SCR_EL3.FIQ was not set, but we cannot directly probe this bit,
and short of checking, we may end-up trapping to EL3, and the
firmware may not be please to get such an exception. Yes, this
is dumb.
Instead, let's use PMR to find out if its value gets affected by
SCR_EL3.FIQ being set. We use the fact that when SCR_EL3.FIQ is
set, the LSB of the priority is lost due to the shifting back and
forth of the actual priority. If we read back a 0, we know that
Group0 is unavailable. In case we read a non-zero value, we can
safely reset the AP0Rn register.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
A new feature Range Selector (RS) has been added to GIC specification
in order to support more than 16 CPUs at affinity level 0. New fields
are introduced in SGI system registers (ICC_SGI0R_EL1, ICC_SGI1R_EL1
and ICC_ASGI1R_EL1) to relax an artificial limit of 16 at level 0.
- A new RSS field in ICC_CTLR_EL3, ICC_CTLR_EL1 and ICV_CTLR_EL1:
[18] - Range Selector Support (RSS)
0b0 = Targeted SGIs with affinity level 0 values of 0-15 are supported.
0b1 = Targeted SGIs with affinity level 0 values of 0-255 are supported.
- A new RS field in ICC_SGI0R_EL1, ICC_SGI1R_EL1 and ICC_ASGI1R_EL1:
[47:44] - RangeSelector (RS) which group of 16 TargetList[n] field
TargetList[n] represents aff0 value ((RS*16)+n)
When ICC_CTLR_EL3.RSS==0 or ICC_CTLR_EL1.RSS==0, RS is RES0.
- A new RSS field in GICD_TYPER:
[26] - Range Selector Support (RSS)
0b0 = Targeted SGIs with affinity level 0 values of 0-15 are supported.
0b1 = Targeted SGIs with affinity level 0 values of 0-255 are supported.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
When masking/unmasking a doorbell interrupt, it is necessary
to issue an invalidation to the corresponding redistributor.
We use the DirectLPI feature by writting directly to the corresponding
redistributor.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
V{PEND,PROP}BASER being 64bit registers, they need some ad-hoc
accessors on 32bit, specially given that VPENDBASER contains
a Valid bit, making the access a bit convoluted.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Per ARM DDI 0487B.a, the registers are named ICC_IGRPEN*_EL1 rather than
ICC_GRPEN*_EL1. Correct our mnemonics and comments to match, before we
add more GICv3 register definitions.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Acked-by: Christoffer Dall <cdall@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
|
|
Unlike most sysreg defintiions, the GICv3 definitions don't have a SYS_
prefix, and they don't live in <asm/sysreg.h>. Additionally, some
definitions are duplicated elsewhere (e.g. in the KVM save/restore
code).
For consistency, and to make it possible to share a common definition
for these sysregs, this patch moves the definitions to <asm/sysreg.h>,
adding a SYS_ prefix, and sorting the registers per their encoding.
Existing users of the definitions are fixed up so that this change is
not problematic.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
|
|
readq and writeq type of assessors are not supported in AArch32, so we
need to specialise them and glue later with series of 32-bit accesses
on AArch32 side.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
It'd be better to switch to CMA... but before that done redirect
flush_dcache operation, so 32-bit implementation could be wired
latter.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
The workaround for Cavium ThunderX erratum 23154 has a homebrew
pipeflush built out of NOP sequences around the read of the IAR.
This patch converts the code to use the new nops macro, which makes it
a little easier to read.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
The GIC system registers are accessed using open-coded wrappers around
the mrs_s/msr_s asm macros.
This patch moves the code over to the {read,wrote}_sysreg_s accessors
instead, reducing the amount of explicit asm blocks in the arch headers.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Pull KVM updates from Radim Krčmář:
"All architectures:
- move `make kvmconfig` stubs from x86
- use 64 bits for debugfs stats
ARM:
- Important fixes for not using an in-kernel irqchip
- handle SError exceptions and present them to guests if appropriate
- proxying of GICV access at EL2 if guest mappings are unsafe
- GICv3 on AArch32 on ARMv8
- preparations for GICv3 save/restore, including ABI docs
- cleanups and a bit of optimizations
MIPS:
- A couple of fixes in preparation for supporting MIPS EVA host
kernels
- MIPS SMP host & TLB invalidation fixes
PPC:
- Fix the bug which caused guests to falsely report lockups
- other minor fixes
- a small optimization
s390:
- Lazy enablement of runtime instrumentation
- up to 255 CPUs for nested guests
- rework of machine check deliver
- cleanups and fixes
x86:
- IOMMU part of AMD's AVIC for vmexit-less interrupt delivery
- Hyper-V TSC page
- per-vcpu tsc_offset in debugfs
- accelerated INS/OUTS in nVMX
- cleanups and fixes"
* tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (140 commits)
KVM: MIPS: Drop dubious EntryHi optimisation
KVM: MIPS: Invalidate TLB by regenerating ASIDs
KVM: MIPS: Split kernel/user ASID regeneration
KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
KVM: arm/arm64: vgic: Don't flush/sync without a working vgic
KVM: arm64: Require in-kernel irqchip for PMU support
KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register
KVM: PPC: Book3S PR: Support 64kB page size on POWER8E and POWER8NVL
KVM: PPC: Book3S: Remove duplicate setting of the B field in tlbie
KVM: PPC: BookE: Fix a sanity check
KVM: PPC: Book3S HV: Take out virtual core piggybacking code
KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread
ARM: gic-v3: Work around definition of gic_write_bpr1
KVM: nVMX: Fix the NMI IDT-vectoring handling
KVM: VMX: Enable MSR-BASED TPR shadow even if APICv is inactive
KVM: nVMX: Fix reload apic access page warning
kvmconfig: add virtio-gpu to config fragment
config: move x86 kvm_guest.config to a common location
arm64: KVM: Remove duplicating init code for setting VMID
ARM: KVM: Support vgic-v3
...
|
|
Since we are going to share vgic-v3 save/restore code with ARM keep
arch specific accessors separately.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
|
|
Currently, when running on FVP, CPU 0 boots up with its BPR changed from
the reset value. This renders it impossible to (preemptively) prioritize
interrupts on CPU 0.
This is harmless on normal systems since Linux typically does not
support preemptive interrupts. It does however cause problems in
systems with additional changes (such as patches for NMI simulation).
Many thanks to Andrew Thoelke for suggesting the BPR as having the
potential to harm preemption.
Suggested-by: Andrew Thoelke <andrew.thoelke@arm.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
The ARM GICv3 specification mentions the need for dsb after a read
from the ICC_IAR1_EL1 register:
4.1.1 Physical CPU Interface:
The effects of reading ICC_IAR0_EL1 and ICC_IAR1_EL1
on the state of a returned INTID are not guaranteed
to be visible until after the execution of a DSB.
Not having this could result in missed interrupts, so let's add the
required barrier.
[Marc: fixed commit message]
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Tirumalesh Chalamarla <tchalamarla@caviumnetworks.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Both the 32bit and 64bit versions of the GICv3 header file are using
barriers, but neglect to include barrier.h, leading to an interesting
splat in some circumstances.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1449483072-17694-3-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
On 32bit platforms, we cannot assure that an I/O ldrd or strd will be
done atomically. Besides, an hypervisor would be unable to emulate such
accesses.
In order to allow the AArch32 version of the driver to split them into
two 32bit accesses while keeping the requirement for atomic writes, this
patch specializes the IROUTER and TYPER accesses.
Since the latter is an ID register, it won't need to be read atomically,
but we still avoid future confusion by using gic_read_typer instead of a
generic gic_readq.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
This patch does a few simple compatibility-related changes:
- change the system register access prototypes to their actual size,
- homogenise mpidr accesses with unsigned long,
- force the 64bit register values to unsigned long long.
Note: the list registers are 64bit on GICv3, but the AArch32 vGIC driver
will need to split their values into two 32bit registers: LRn and LRCn.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
This patch moves the GICv3 system register access helpers to
arch/arm64/. Their 32bit counterparts will need to use mrc/mcr accesses
instead of mrs_s/msr_s.
[maz: fixed conflict with Cavium erratum handling]
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
Mark Rutland
Linu Cherian
Fuad Tabba
Hector Martin
Alexandru Elisei
Paolo Bonzini
James Morse
Zenghui Yu
Marc Zyngier
Julien Thierry
Linus Torvalds
Julien Thierry
Thomas Gleixner
Marc Zyngier
Shanker Donthineni
Vladimir Murzin
Will Deacon
Daniel Thompson
Tirumalesh Chalamarla
Jean-Philippe Brucker