aboutsummaryrefslogtreecommitdiffstats
path: root/arch/mips/kernel/irq_cpu.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-06-21MIPS/IRQCHIP: Move irq_chip from arch/mips to drivers/irqchip.Ralf Baechle1-169/+0
While at it, rename it because in drivers/irqchip no longer every CPU is a MIPS. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-01-16MIPS: IRQ: Fix disable_irq on CPU IRQsFelix Fietkau1-0/+4
If the irq_chip does not define .irq_disable, any call to disable_irq will defer disabling the IRQ until it fires while marked as disabled. This assumes that the handler function checks for this condition, which handle_percpu_irq does not. In this case, calling disable_irq leads to an IRQ storm, if the interrupt fires while disabled. This optimization is only useful when disabling the IRQ is slow, which is not true for the MIPS CPU IRQ. Disable this optimization by implementing .irq_disable and .irq_enable Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8949/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Set vint handler when mapping CPU interruptsAndrew Bresticker1-0/+4
When mapping an interrupt in the CPU IRQ domain, set the vint handler for that interrupt if the CPU uses vectored interrupt handling. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7802/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Provide a generic plat_irq_dispatchAndrew Bresticker1-0/+18
For platforms which boot with device-tree or have correctly chained all external interrupt controllers, a generic plat_irq_dispatch() can be used. Implement a plat_irq_dispatch() which simply handles all the pending interrupts as reported by C0_Cause. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7801/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Rename mips_cpu_intc_init() -> mips_cpu_irq_of_init()Andrew Bresticker1-2/+2
mips_cpu_intc_init() is used for DT-based initialization of the CPU IRQ domain. Give it a more appropriate name. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7800/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Always use IRQ domains for CPU IRQsAndrew Bresticker1-25/+11
Use an IRQ domain for the 8 CPU IRQs in both the DT and non-DT cases. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7799/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Panic messages should not end in \n.Ralf Baechle1-1/+1
Panic() is going to add a \n itself and it's annoying if a panic message rolls of the screen on a device with no scrollback. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-21Merge branch 'mips-next-3.9' of git://git.linux-mips.org/pub/scm/john/linux-john into mips-for-linux-nextRalf Baechle1-0/+42
2013-02-17MIPS: add irqdomain support for the CPU IRQ controllerGabor Juhos1-0/+42
Add code to load a irq_domain for the MIPS IRQ controller from a devicetree file. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: David Daney <david.daney@cavium.com> Patchwork: http://patchwork.linux-mips.org/patch/4902/
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle1-4/+4
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-03-28Disintegrate asm/system.h for MIPSDavid Howells1-1/+0
Disintegrate asm/system.h for MIPS. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> cc: linux-mips@linux-mips.org
2011-07-25MIPS: Install handlers for software IRQsKevin Cernekee1-8/+6
BMIPS4350/4380/5000 CMT/SMT all use SW INT0/INT1 for inter-thread signaling. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1709/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-29MIPS: Convert the irq functions to the new namesThomas Gleixner1-2/+2
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-25MIPS: irq_cpu: Convert to new irq_chip functionsThomas Gleixner1-25/+21
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2191/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-07MIPS: Add missing #inclusions of <linux/irq.h>David Howells1-0/+1
Add missing #inclusions of <linux/irq.h> to a whole bunch of files that should really include it. Note that this can replace #inclusions of <asm/irq.h>. This is required for the patch to sort out irqflags handling function naming to compile on MIPS. The problem is that these files require access to things like setup_irq() - which isn't available by #including <linux/interrupt.h> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ralf Baechle <ralf@linux-mips.org>
2009-03-30MIPS: Enable GENERIC_HARDIRQS_NO__DO_IRQ for all platformsRalf Baechle1-1/+2
__do_IRQ() is deprecated and will go away. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15[MIPS] irq_cpu: use handle_percpu_irq handler to avoid dropping interrupts.Ralf Baechle1-1/+1
This matters to any sort of device that is wired to one of the CPU interrupt pins on an SMP system. Typically the scenario is most easily triggered with the count/compare timer interrupt where the same interrupt number and thus irq_desc is used on each processor. CPU A CPU B do_IRQ() generic_handle_irq() handle_level_irq() spin_lock(desc_lock) set IRQ_INPROGRESS spin_unlock(desc_lock) do_IRQ() generic_handle_irq() handle_level_irq() spin_lock(desc_lock) IRQ_INPROGRESS set => bail out spin_lock(desc_lock) clear IRQ_INPROGRESS spin_unlock(desc_lock) In case of the cp0 compare interrupt this means the interrupt will be acked and not handled or re-armed on CPU b, so there won't be any timer interrupt until the count register wraps around. With kernels 2.6.20 ... 2.6.23 we usually were lucky that things were just working right on VSMP because the count registers are synchronized on bootup so it takes something that disables interrupts for a long time on one processor to trigger this one. For scenarios where an interrupt is multicasted or broadcasted over several CPUs the existing code was safe and the fix will break it. There is no way to know in the interrupt controller code because it is abstracted from the platform code. I think we do not have such a setup currently, so this should be ok. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-06[MIPS] use name instead of typename for each irq_chipAtsushi Nemoto1-2/+2
The "typename" field was obsoleted by the "name" field. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-06[MIPS] Define MIPS_CPU_IRQ_BASE in generic headerAtsushi Nemoto1-10/+7
The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all platforms and are same value on most platforms (0 or 16, depends on CONFIG_I8259). Define them in asm-mips/mach-generic/irq.h and make them customizable. This will save a few cycle on each CPU interrupt. A good side effect is removing some dependencies to MALTA in generic SMTC code. Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing them might cause some header dependency problem and there seems no good reason to customize it. So currently only VR41XX is using custom MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259. Testing this patch on those platforms is greatly appreciated. Thank you. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-06[MIPS] Compile __do_IRQ() when really neededFranck Bui-Huu1-10/+0
__do_IRQ() is needed only by irq handlers that can't use default handlers defined in kernel/irq/chip.c. For others platforms there's no need to compile this function since it won't be used. For those platforms this patch defines GENERIC_HARDIRQS_NO__DO_IRQ symbol which is used exactly for this purpose. Futhermore for platforms which do not use __do_IRQ(), end() method which is part of the 'irq_chip' structure is not used. This patch simply removes this method in this case. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] use generic_handle_irq, handle_level_irq, handle_percpu_irqAtsushi Nemoto1-1/+4
Further incorporation of generic irq framework. Replacing __do_IRQ() by proper flow handler would make the irq handling path a bit simpler and faster. * use generic_handle_irq() instead of __do_IRQ(). * use handle_level_irq for obvious level-type irq chips. * use handle_percpu_irq for irqs marked as IRQ_PER_CPU. * setup .eoi routine for irq chips possibly used with handle_percpu_irq. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] IRQ cleanupsAtsushi Nemoto1-64/+13
This is a big irq cleanup patch. * Use set_irq_chip() to register irq_chip. * Initialize .mask, .unmask, .mask_ack field. Functions for these method are already exist in most case. * Do not initialize .startup, .shutdown, .enable, .disable fields if default routines provided by irq_chip_set_defaults() were suitable. * Remove redundant irq_desc initializations. * Remove unnecessary local_irq_save/local_irq_restore, spin_lock. With this cleanup, it would be easy to switch to slightly lightwait irq flow handlers (handle_level_irq(), etc.) instead of __do_IRQ(). Though whole this patch is quite large, changes in each irq_chip are not quite simple. Please review and test on your platform. Thanks. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13[MIPS] Eleminate interrupt migration helper use.Ralf Baechle1-2/+2
> #define hw_interrupt_type irq_chip > typedef struct irq_chip hw_irq_controller; > #define no_irq_type no_irq_chip > typedef struct irq_desc irq_desc_t; Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-29[PATCH] genirq: rename desc->handler to desc->chipIngo Molnar1-2/+2
This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29MT bulletproofing.Ralf Baechle1-12/+67
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Inlining will result in back-to-back mtc0 mfc0 instructions. Break theRalf Baechle1-0/+2
hazard by using back_to_back_c0_hazard(). Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Use an irq_enable_hazard hazard barrier in unmask_mips_irq. ThisRalf Baechle1-0/+2
hasn't been an actual bug, so it's more a change to be 100% compliant with the requirements of the architecture spec. Similar fix to mask_mips_irq where there was a slightly less theoretical chance of getting hit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Convert struct hw_interrupt_type initializations to ISO C99 namedRalf Baechle1-8/+7
initializers. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Mask and ack CPU interrupts upon initialization. Keep the stateMaciej W. Rozycki1-1/+6
of software interrupts when unmasking. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds1-0/+118
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.