aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc/dce110 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-02drm/amd/display: memory leakNavid Emamdoost1-0/+1
In dcn*_clock_source_create when dcn20_clk_src_construct fails allocated clk_src needs release. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-25drm/amd/display: prevent memory leakNavid Emamdoost1-0/+1
In dcn*_create_resource_pool the allocated memory should be released if construct pool fails. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: Expose OTG_V_TOTAL_MID for HW DiagsBayan Zabihiyan1-1/+2
[Why] Existing HW Features, HW Diags test requested that the registers be exposed. [How] Add V_TOTAL_MID to existing DC structures. Make sure values are passed down throughout DC Add Register definition. Program the additional registers Add additional Logic for V_TOTAL_CONTROL. Signed-off-by: Bayan Zabihiyan <bayan.zabihiyan@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: fix audio endpoint not getting disabled issueSu Sung Chung2-19/+25
[Why] Disable_audio_stream gets enum option as a paramenter which will decide if we free acquired resources or not. However checks for the option is guarded by the other condition which check if audio stream is getting diabled more than once. With both conditions combined, if we attempt to disable audio stream twice in a row, first with keep and second with free as an option, we will never free any resources, which will make system think there is audio endpoint connected even after we plug out the device [How] Get rid of option as parameter to disable_audio_stream and move the part of the code that free acquired resources to outside where to keep or to free resources is actually determined Signed-off-by: Su Sung Chung <Su.Chung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: re structure odm to allow 4 to 1 supportDmytro Laktyushkin1-3/+4
Currently odm is handled using top_bottom pipe by special casing the differing opps to differentiate from mpc combine. Since top/bottom pipe list was made to track mpc muxing this creates difficulties in adding a 4 pipe odm case support. Rather than continue using mpc combine list, this change reworks odm to use it's own linked list to keep track of odm combine pipes. This also opens up options for using mpo with odm, if a practical use case is ever found. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Make init_hw and init_pipes generic for seamless bootMartin Leung2-9/+9
[Why] For seamless boot the init_hw sequence must be split into actual hardware vs pipes, in order to defer pipe initialization to set mode and skip of pipe-destructive sequences [How] made dcn10_init_hw and dcn10_init_pipes generic for future dcns to inherit deleted dcn20 specific versions. This is part 1 of a 2 partimplementation of seamless boot Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: make firmware info only load once during dc_bios createDmytro Laktyushkin1-3/+1
Currently every time DC wants to access firmware info we make a call into VBIOS. This makes no sense as there is nothing that can change runtime inside fw info and can cause issues when calling unstable bios during bringup. This change eliminate this behavior by only calling bios once for fw info and keeping it stored as part of dc_bios. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: reset hdmi tmds rate and data scramble on pipe resetWenjing Liu1-1/+4
[why] hdmi data scramble and tmds rate is not reset during pipe reset. [how] reset hdmi tmds rate and data scramble on pipe reset Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-12drm/amd/display: Fix a typo - dce_aduio_mask --> dce_audio_maskChristophe JAILLET1-1/+1
This should be 'dce_audio_mask', not 'dce_aduio_mask'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Set enabled to false at start of audio disableNicholas Kazlauskas1-2/+2
[Why] In an effort to stop redundant calls to dce110_disable_audio_stream the audio->enabled flag was added to the audio resource struct. While this state probably shouldn't have been tracked on the audio struct itself it still works fine for some sequences. However, it does not work for cases where we're freeing the audio resource (such as hotplugs) or when dynamic audio is enabled. In these cases the pipe_ctx->stream_res.audio = NULL before we can set audio->enabled = false. The next time we acquire the audio resource such as on hotplug the audio will not be enabled for the stream since DC thinks it's still enabled. Audio state tracking should cover this sequence. [How] Set audio->enabled = false at the start as long as we have pipe_ctx->stream_res.audio. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Clean up dynamic metadata logicJulian Parkin1-23/+1
[Why] Code to enable DCN20 dynamic metadata feature is duplicated in two places and was added to DCE110 enable stream. [How] Create DCN20 specific enable stream function for clarity, and add a hardware sequencer function to program dynamic metadata to avoid the duplicate code. Signed-off-by: Julian Parkin <julian.parkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: add dcc programming for dual planeDmytro Laktyushkin1-21/+21
Add dual plane dcc programming support for surfaces. Removes unions from plane size and dcc params as they serve no practical purpose only making our code more convoluted. This results in easy dual plane dcc and surface size programming. Temporary diags_dm code is used to handle the interface change without breaking functionality as a diags change needs to be applied after this one. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Disable Audio on reinitialize hardwareAlvin Lee1-4/+16
[Why] When we recover from hang, we do not want to skip the audio enable call. [How] Disable audio in dc_reinitialize_hardware Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display:Use Pixel clock in 100Hz units for HDMI Audio wall clock DTONevenko Stupar1-11/+11
[Why] -Pass and use pixel clock in 100 Hz to Audio for HDMI audio DTO for Audio wall clock programming so audio DTO gets increased precision for timings with /1001 factor. -For HDMI TMDS for N and CTS ACR tables are based on 10 KHz units, these does not need to be modified as N and CTS values are still valid using current tables. Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25drm/amd/display: update infoframe after dig fe is turned on (v2)Nicholas Kazlauskas1-0/+1
[Why] The AVI infoframe is incorrectly programmed on DCN1/2 when enabling a stream - causing the wrong pixel encoding to be used for display. This is because the AVI infoframe is programmed before the DIG BE is connected to the FE and turned on, so enabling the AFMT block doesn't actually work and the registers subsequently can't be written to. [How] Program the infoframe *after* turning on the DIG FE. This was the behavior previously used but it was incorrectly reverted when adding the DCN2 HW sequencer code. v2: Don't call update_info_frame twice Fixes: 7ed4e6352c16fe01 ("drm/amd/display: Add DCN2 HW Sequencer and Resource") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25Merge branch 'drm-next' into drm-next-5.3Alex Deucher5-0/+12
Backmerge drm-next and fix up conflicts due to drmP.h removal. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: make clk_mgr call enable_pme_waSu Sung Chung1-23/+6
[why] Before for raven and navi we are calling pp_smu functions for pme [how] refactor a code so we will call clk_mgr's enable_pme_wa function so we can use pme_wa for future asics. This way we don't need to worry about different ASIC since clk_mgr already have that information Signed-off-by: Su Sung Chung <Su.Chung@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display/dc: fix azalia workaround sw implementation bughersen wu1-2/+2
caller of pp_nv_set_pme_wa_enable pass incorrect pp_smu: dc->res_pool->pp_smu. it should be dc->res_pool->pp_smu->nv_funcs.pp_smu. with incorrect input, pp->dm = NULL. This causes system crash. Signed-off-by: hersen wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/display: Add DCN2 HW Sequencer and ResourceHarry Wentland1-1/+41
Add DCN2 resource definition and HW Sequencer changes. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-20Revert "drm/amd/display: make clk_mgr call enable_pme_wa"Alex Deucher1-6/+19
This reverts commit a1651530a3bacf1d796fdb7bc587faef9f305d36. Revert this to apply the version that includes DCN2 support. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-14Merge tag 'drm-misc-next-2019-06-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDaniel Vetter5-0/+12
drm-misc-next for v5.3: UAPI Changes: Cross-subsystem Changes: - Add code to signal all dma-fences when freed with pending signals. - Annotate reservation object access in CONFIG_DEBUG_MUTEXES Core Changes: - Assorted documentation fixes. - Use irqsave/restore spinlock to add crc entry. - Move code around to drm_client, for internal modeset clients. - Make drm_crtc.h and drm_debugfs.h self-contained. - Remove drm_fb_helper_connector. - Add bootsplash to todo. - Fix lock ordering in pan_display_legacy. - Support pinning buffers to current location in gem-vram. - Remove the now unused locking functions from gem-vram. - Remove the now unused kmap-object argument from vram helpers. - Stop checking return value of debugfs_create. - Add atomic encoder enable/disable helpers. - pass drm_atomic_state to atomic connector check. - Add atomic support for bridge enable/disable. - Add self refresh helpers to core. Driver Changes: - Add extra delay to make MTP SDM845 work. - Small fixes to virtio, vkms, sii902x, sii9234, ast, mcde, analogix, rockchip. - Add zpos and ?BGR8888 support to meson. - More removals of drm_os_linux and drmP headers for amd, radeon, sti, r128, r128, savage, sis. - Allow synopsis to unwedge the i2c hdmi bus. - Add orientation quirks for GPD panels. - Edid cleanups and fixing handling for edid < 1.2. - Add runtime pm to stm. - Handle s/r in dw-hdmi. - Add hooks for power on/off to dsi for stm. - Remove virtio dirty tracking code, done in drm core. - Rework BO handling in ast and mgag200. Tiny conflict in drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c, needed #include <linux/slab.h> to make it compile. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0e01de30-9797-853c-732f-4a5bd6e61445@linux.intel.com
2019-06-11drm/amd/display: make clk_mgr call enable_pme_waSu Sung Chung1-19/+6
refactor a code so we will call clk_mgr's enable_pme_wa function so we can use pme_wa for future asics. This way we don't need to worry about different ASIC since clk_mgr already have that information Signed-off-by: Su Sung Chung <Su.Chung@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-11drm/amd/display: S3 Resume time increase after decoupling DPMS from fast bootSivapiriyanKumarasamy1-9/+26
[Why] We incorrectly began powering down the display at boot/resume whenever fast boot was not possible. This should not be done in the case where there exists a stream for the eDP since this implies that we want to turn it on. [How] Add check for eDP stream to decide whether to power off edp. Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Reza Amini <Reza.Amini@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-10drm/amd: drop use of drmp.h in os_types.hSam Ravnborg2-0/+3
Drop use of the deprecated drmP.h from display/dc/os_types.h Fix all fallout after this change. Most of the fixes was adding a missing include of vmalloc.h. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-4-sam@ravnborg.org
2019-06-10drm/amd: drop dependencies on drm_os_linux.hSam Ravnborg4-0/+9
Fix so no files in drm/amd/ depends on the deprecated drm_os_linux.h header file. It was done manually: - remove drm_os_linux.h from drmP.h - fix all build errros Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-3-sam@ravnborg.org
2019-05-31drm/amd/display: do not power on eDP power rail earlyAnthony Koo1-3/+0
[Why] Modern Standby may toggle display adapter state between D0 and D3 state unpredictably. But events that cause transition to D0 are not always resulting in a display light up scenario. Modern eDP panels should be able to power on panel logic quickly upon VDD going high. Based on spec, the T3 time between VDD on and HPD high can be between 0 and 80 ms. Doing any tricky sorts of optimization by powering on panel VDD early during D0 transition on can negatively impact other features due to unnecessary power drain and toggling when final system state does not intend for the panel to be lit up. We need OEMs to source higher end panels that have T3 time close to 0 if they want quick S3/Modern Standby resume times. [How] Remove panel VDD power on in init_hw Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: disable PSR/ABM before destroy DMCU structPaul Hsieh1-0/+5
[Why] 1. DMCU is not running on some platform but driver still send ABM command. It may cause assert due to DMCU is not alive. 2. To make sure PSR disable when driver disable [How] 1. Add dmcu_is_running in ABM struct, driver can check this flag to determine driver should send ABM command or not. 2. Send PSR disable command when destroy PSR Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Disable audio stream only if it's currently enabledEryk Brol1-0/+10
[Why] Previously there were 2 consecutive calls being made to disable audio stream. The first one disabled the audio stream, and the second one went through and also tried to disable the audio stream causing BACO entry issues due to the ASIC appearing busy. [How] 1. Add a status field to the audio struct which stores enabled/disabled info 2. In the calls to enable/disable audio stream check if we're already in the desired state before executing the function Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: make clk mgr soc specificEric Yang2-29/+3
[Why] First step of refactoring clk mgr to better handle different ways of handling clock operations. Clock operation policies are soc specific and not just DCN vesion specific. It is not a hw resource, should not be in the resource pool. [How] Change clock manager creation to be based on HW internal ID, rename clock manager members to be more clear. Move clock manager out of resource. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Engine-specific encoder allocationWesley Chalmers2-1/+39
[WHY] From DCE110 onward, we have the ability to assign DIG BE and FE separately for any display connector type; before, we could only do this for DP. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: enabling stream after HPD low to high happenedCharlene Liu1-1/+3
[Why] 1. No real HPD plug in/out but HPD happens, the driver notifies OS connection changed. 2. No display in target. When HPD goes low to high, the driver should regard as HPD and enter setmode flow. [How] In this case, even stream didn't change but still retrain. Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Remove DPMS state dependency for fast bootSivapiriyanKumarasamy1-50/+35
[Why] The DPMS state of a display should not impact whether we want to enable fast boot. Currently fast boot is not enabled when resuming from S4 because of this. [How] Remove check for DPMS state when determining if fast boot can be applied. Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: stop external access to internal optc sync paramsDmytro Laktyushkin5-0/+25
These are internal otg params and should be handled as such. Thich change passes the params as function arguments. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Fill prescale_params->scale for RGB565Nicholas Kazlauskas1-0/+3
[Why] An assertion is thrown when using SURFACE_PIXEL_FORMAT_GRPH_RGB565 formats on DCE since the prescale_params->scale wasn't being filled. Found by a dmesg-fail when running the igt@kms_plane@pixel-format-pipe-a-planes test on Baffin. [How] Fill in the scale parameter. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-15drm/amd/display: Add fast_validate parameterJoshua Aberback1-1/+2
Add a fast_validate parameter in dc_validate_global_state for future use Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-15drm/amd/display: expand plane caps to include fp16 and scaling capabilityJun Lei1-2/+36
[why] there are some scaling capabilities such as fp16 which are known to be unsupported on a given ASIC. exposing these static capabilities allows much simpler implementation for OS interfaces which require to report such static capabilities to reduce the number of dynamic validation calls [how] refactor the existing plane caps to be more extensible, and add fp16 and scaling capabilities Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-10drm/amd/display: fix clk_mgr namingDmytro Laktyushkin1-2/+2
clk_mgr is called dccg in dc_state, this change fixes that Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-03drm/amd/display: Fix multi-thread writing to 1 stateAidan Wood2-38/+38
[Why] Multiple threads were writing back to one global VBA in DC resulting in multiple threads overwriting eachother's data [How] Add an instance of DML (which contains VBA) to each context and change all calls that used dc->dml to use context->dml. Created a seperate copy constructor for linux in a case where there is no access to DC. Signed-off-by: Aidan Wood <Aidan.Wood@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-27drm/amd/display: use dc_is_virtual instead of ENUMEric Bernstein1-1/+1
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-20drm/amd/display: add missing opp programming for odmDmytro Laktyushkin1-1/+1
A number of places opp programming was missing for odm second pipe. This change fixes the oversight. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-20drm/amd/display: Fix DP audio regressionWesley Chalmers1-3/+2
Audio was unmuted for HDMI only, need to do so for DP as well. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-20drm/amd/display: fix DP 422 VID_M half the rate issue.Charlene Liu1-2/+1
[Description] when programming VID_TIMING, we were using the original VESA timing for DP_VIDM/N. for YCbCr420 or compressed YCbCr422, using half rate as YCbCr444. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-20drm/amd/display: Fix setting DP_VID_N_MULEric Bernstein1-0/+1
[Why] Need to set VID_N_MUL for 4:2:0 cases [How] Move setting to enc1_stream_encoder_dp_unblank and ensure it is also set for non-4:2:0 cases. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-19drm/amd/display: fix up reference clock abstractionsJun Lei1-1/+1
[why] "reference clock" is a very overloaded variable in DC and causes confusion as there are multiple sources of reference clock, which may be different values incorrect input values to DML will cause DCHUB to be programmed improperly and lead to hard to debug underflow issues [how] instead of using ref clock everywhere, specify WHICH ref clock: - xtalin - dccg refclk - dchub refclk these are all distinct values which may not be equal Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: David Francis <David.Francis@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-19drm/amd/display: Rename is_hdmi to is_hdmi_tmds typeEric Bernstein1-7/+8
HDMI has TMDS and FRL signal types. Be specific about what is used. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-19drm/amd/display: Add plane capabilities to dc_capsNicholas Kazlauskas1-0/+20
[Why] The current dc_caps doesn't provide the information needed to determine the count and type of each plane to be exposed to userspace. There are three types of DRM planes that are exposed to userspace: 1. Primary planes (can be used for modesetting) 2. Overlay planes (can be blended below or above a primary plane) 3. Cursor planes (blended topmost) We need to know the number and type of each in amdgpu_dm to expose to userspace. Hardware supports blending planes below, above or both ways depending on the ASIC. Alpha support is also ASIC dependent. Some hardware has dedicated pipes for overlays and other hardware combines the pipes. All of this should be exposed in a way that DM can query and use. [How] Introduce the dc_plane_cap structure that describes the capabilities for the hw planes. It describes: - the type of the plane - whether the plane can blend with planes below it - whether the plane can blend with planes above it - whether the plane supports per pixel alpha blending - supported formats on the plane (partial list for now) Pre DCN ASICs don't have their full capabilities described for now. They can be updated as needed in the future. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-05drm/amd/display: make seamless boot work genericallyAnthony Koo1-0/+3
[Why] Seamless boot code not working on all ASICs because of some underflow issues caused by some uninitialized HW state. [How] Keep some logical and power gating init code in hw_init. Move some per pipe init code to enable accelerated mode Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-05drm/amd/display: PPLIB HookupJun Lei1-9/+28
[Why] Make dml and integration with pplib clearer. [How] Change the way the dml formula is initialized to make its values more clear. Restructure DC interface with pplib into rv_funcs. Cap clocks received from pplib. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-19drm/amd/display: Refactor for setup periodic interrupt.Yongqiang Sun1-4/+2
[Why] Current periodic interrupt start point calc in optc is not clear. [How] 1. DM convert delta time to lines number and dc will calculate the start position as per lines number and interrupt type. 2. hwss calculates the start point as per line offset. 3. optc programs vertical interrupts register as per start point and interrupt source. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-19drm/amd/display: Ungate stream before programming registersGary Kattan1-0/+6
[Why] Certain tests fail after a fresh reboot. This is caused by writing to registers prior to ungating the stream we're trying to program. [How] Make sure the stream is ungated before writing to its registers. This also enables power-gating plane resources before init_hw initializes them. Additionally, this does some refactoring to move gating/ungating from enable/disable_plane functions to where stream resources are enabled/disabled. Signed-off-by: Gary Kattan <gary.kattan@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.