aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/can/usb/peak_usb
AgeCommit message (Collapse)AuthorFilesLines
2022-11-07can: dev: fix skb drop checkOliver Hartkopp1-1/+1
In commit a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") the priv->ctrlmode element is read even on virtual CAN interfaces that do not create the struct can_priv at startup. This out-of-bounds read may lead to CAN frame drops for virtual CAN interfaces like vcan and vxcan. This patch mainly reverts the original commit and adds a new helper for CAN interface drivers that provide the required information in struct can_priv. Fixes: a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") Reported-by: Dariusz Stojaczyk <Dariusz.Stojaczyk@opensynergy.com> Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Cc: Max Staudt <max@enpas.org> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20221102095431.36831-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org # 6.0.x [mkl: patch pch_can, too] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-08-31net: move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220830201457.7984-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28can: peak_usb: advertise timestamping capabilities and add ioctl supportVincent Mailhol5-0/+45
Currently, userland has no method to query which timestamping features are supported by the peak_usb driver (aside maybe of getting RX messages and observe whether or not hardware timestamps stay at zero). The canonical way to add hardware timestamp support is to implement ethtool_ops::get_ts_info() in order to advertise the timestamping capabilities and to implement net_device_ops::ndo_eth_ioctl() as requested in [1]. Currently, the driver only supports hardware RX timestamps [2] but not hardware TX. For this reason, the generic function can_ethtool_op_get_ts_info_hwts() and can_eth_ioctl_hwts() can not be reused and instead this patch adds pcan_get_ts_info() and peak_eth_ioctl(). [1] kernel doc Timestamping, section 3.1: "Hardware Timestamping Implementation: Device Drivers" Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers [2] https://lore.kernel.org/linux-can/20220727080634.l6uttnbrmwbabh3o@pengutronix.de/ CC: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20220727101641.198847-15-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: add CAN_ERR_CNT flag to notify availability of error counterVincent Mailhol1-0/+1
Add a dedicated flag in uapi/linux/can/error.h to notify the userland that fields data[6] and data[7] of the CAN error frame were respectively populated with the tx and rx error counters. For all driver tree-wide, set up this flags whenever needed. Link: https://lore.kernel.org/all/20220719143550.3681-12-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-19can: peak_usb: include support for a new MCUStephane Grosjean1-10/+58
The CANFD-USB PCAN-USB FD interface undergoes an internal component change that requires a slight modification of its drivers, which leads them to dynamically use endpoint numbers provided by the interface itself. In addition to a change in the calls to the USB functions exported by the kernel, the detection of the USB interface dedicated to CAN must also be modified, as some PEAK-System devices support other interfaces than CAN. Link: https://lore.kernel.org/all/20220719120632.26774-3-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> [mkl: add missing cpu_to_le16() conversion] [mkl: fix networking block comment style] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-19can: peak_usb: correction of an initially misnamed field nameStephane Grosjean2-2/+2
The data structure returned from the USB device contains a number flashed by the user and not the serial number of the device. Link: https://lore.kernel.org/all/20220719120632.26774-2-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-19can: peak_usb: pcan_dump_mem(): mark input prompt and data pointer as constStephane Grosjean2-2/+2
Mark the input prompt and data pointer as const. Link: https://lore.kernel.org/all/20220719120632.26774-1-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> [mkl: mark data pointer as const, too; update commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-23can: peak_usb: fix typo in commentJulia Lawall1-1/+1
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Link: https://lore.kernel.org/all/20220521111145.81697-24-Julia.Lawall@inria.fr Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-05can: do not increase tx_bytes statistics for RTR framesVincent Mailhol2-12/+9
The actual payload length of the CAN Remote Transmission Request (RTR) frames is always 0, i.e. no payload is transmitted on the wire. However, those RTR frames still use the DLC to indicate the length of the requested frame. As such, net_device_stats::tx_bytes should not be increased when sending RTR frames. The function can_get_echo_skb() already returns the correct length, even for RTR frames (c.f. [1]). However, for historical reasons, the drivers do not use can_get_echo_skb()'s return value and instead, most of them store a temporary length (or dlc) in some local structure or array. Using the return value of can_get_echo_skb() solves the issue. After doing this, such length/dlc fields become unused and so this patch does the adequate cleaning when needed. This patch fixes all the CAN drivers. Finally, can_get_echo_skb() is decorated with the __must_check attribute in order to force future drivers to correctly use its return value (else the compiler would emit a warning). [1] commit ed3320cec279 ("can: dev: __can_get_echo_skb(): fix real payload length return value for RTR frames") Link: https://lore.kernel.org/all/20211207121531.42941-6-mailhol.vincent@wanadoo.fr Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Yasushi SHOJI <yashi@spacecubics.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Stephane Grosjean <s.grosjean@peak-system.com> Cc: Andreas Larsson <andreas@gaisler.com> Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2 Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2 [mkl: add conversion for grcan] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-05can: do not increase rx_bytes statistics for RTR framesVincent Mailhol3-11/+14
The actual payload length of the CAN Remote Transmission Request (RTR) frames is always 0, i.e. no payload is transmitted on the wire. However, those RTR frames still use the DLC to indicate the length of the requested frame. As such, net_device_stats::rx_bytes should not be increased for the RTR frames. This patch fixes all the CAN drivers. Link: https://lore.kernel.org/all/20211207121531.42941-5-mailhol.vincent@wanadoo.fr Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Yasushi SHOJI <yashi@spacecubics.com> Cc: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> Cc: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2 Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-05can: do not increase rx statistics when generating a CAN rx error message frameVincent Mailhol3-7/+0
The CAN error message frames (i.e. error skb) are an interface specific to socket CAN. The payload of the CAN error message frames does not correspond to any actual data sent on the wire. Only an error flag and a delimiter are transmitted when an error occurs (c.f. ISO 11898-1 section 10.4.4.2 "Error flag"). For this reason, it makes no sense to increment the rx_packets and rx_bytes fields of struct net_device_stats because no actual payload were transmitted on the wire. This patch fixes all the CAN drivers. Link: https://lore.kernel.org/all/20211207121531.42941-2-mailhol.vincent@wanadoo.fr CC: Marc Kleine-Budde <mkl@pengutronix.de> CC: Nicolas Ferre <nicolas.ferre@microchip.com> CC: Alexandre Belloni <alexandre.belloni@bootlin.com> CC: Ludovic Desroches <ludovic.desroches@microchip.com> CC: Chandrasekar Ramakrishnan <rcsekar@samsung.com> CC: Maxime Ripard <mripard@kernel.org> CC: Chen-Yu Tsai <wens@csie.org> CC: Jernej Skrabec <jernej.skrabec@gmail.com> CC: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> CC: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> CC: Michal Simek <michal.simek@xilinx.com> CC: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2 Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-29net: Don't include filter.h from net/sock.hJakub Kicinski1-0/+1
sock.h is pretty heavily used (5k objects rebuilt on x86 after it's touched). We can drop the include of filter.h from it and add a forward declaration of struct sk_filter instead. This decreases the number of rebuilt objects when bpf.h is touched from ~5k to ~1k. There's a lot of missing includes this was masking. Primarily in networking tho, this time. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org
2021-11-06can: peak_usb: exchange the order of information messagesStephane Grosjean1-5/+5
Proposes the possible update of the PCAN-USB firmware after indicating its name and current version. Link: https://lore.kernel.org/all/20211021081505.18223-3-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-11-06can: peak_usb: always ask for BERR reporting for PCAN-USB devicesStephane Grosjean1-9/+8
Since for the PCAN-USB, the management of the transition to the ERROR_WARNING or ERROR_PASSIVE state is done according to the error counters, these must be requested unconditionally. Link: https://lore.kernel.org/all/20211021081505.18223-2-s.grosjean@peak-system.com Fixes: c11dcee75830 ("can: peak_usb: pcan_usb_decode_error(): upgrade handling of bus state changes") Cc: stable@vger.kernel.org Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-24can: peak_usb: CANFD: store 64-bits hw timestampsStephane Grosjean3-3/+20
This patch allows to use the whole 64-bit timestamps received from the CAN-FD device (expressed in µs) rather than only its low part, in the hwtstamp structure of the skb transferred to the network layer, when a CAN/CANFD frame has been received. Link: https://lore.kernel.org/all/20210930094603.23134-1-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: peak_usb: pcan_usb_fd_decode_status(): remove unnecessary test on the nullity of a pointerStephane Grosjean1-2/+1
Since alloc_can_err_skb() puts NULL in cf in the case when skb cannot be allocated and can_change_state() handles the case when cf is NULL, the test on the nullity of skb is now unnecessary. Link: https://lore.kernel.org/all/20210929142111.55757-2-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: peak_usb: pcan_usb_fd_decode_status(): fix back to ERROR_ACTIVE state notificationStephane Grosjean1-3/+2
This corrects the lack of notification of a return to ERROR_ACTIVE state for USB - CANFD devices from PEAK-System. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/all/20210929142111.55757-1-s.grosjean@peak-system.com Cc: stable@vger.kernel.org Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+6
Conflicting commits, all resolutions pretty trivial: drivers/bus/mhi/pci_generic.c 5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU") 56f6f4c4eb2a ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean") drivers/nfc/s3fwrn5/firmware.c a0302ff5906a ("nfc: s3fwrn5: remove unnecessary label") 46573e3ab08f ("nfc: s3fwrn5: fix undefined parameter values in dev_err()") 801e541c79bb ("nfc: s3fwrn5: fix undefined parameter values in dev_err()") MAINTAINERS 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") 8a7b46fa7902 ("MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-25can: peak_usb: pcan_usb_decode_error(): upgrade handling of bus state changesStephane Grosjean1-122/+42
This patch updates old code by using the can_change_state() function published since by the socket-can module. In particular, this new code better manages the change of bus state by also using the value of the error counters that the driver now systematically asks for when initializing the channel. Link: https://lore.kernel.org/r/20210715142842.35793-1-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_usb: pcan_usb_encode_msg(): add informationStephane Grosjean1-2/+4
This patch adds information by replacing a hard-coded values with its symbol and a adding comment. Link: https://lore.kernel.org/r/20210625130931.27438-5-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_usb: PCAN-USB: add support of loopback and one-shot modeStephane Grosjean1-4/+49
The CAN - USB PCAN-USB interface is able to generate one-shot frames as well as loopback frames that it transmits starting from version 4.1 of its firmware. This patch adds support for the one-shot and loopback functionality to the driver, that can be activated if the embedded firmware allows it. If the driver detects that the PCAN-USB device runs an old firmware (< 4.1) it prints a message suggesting to contact <support@peak-system.com> for a possible firmware update. Link: https://lore.kernel.org/r/20210625130931.27438-3-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_usb: pcan_usb_get_device_id(): read value only in case of successStephane Grosjean1-1/+2
In case of error, reading value from response argument is useless. Link: https://lore.kernel.org/r/20210625130931.27438-2-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-24can: peak_usb: pcan_usb_handle_bus_evt(): fix reading rxerr/txerr valuesStephane Grosjean1-4/+6
This patch fixes an incorrect way of reading error counters in messages received for this purpose from the PCAN-USB interface. These messages inform about the increase or decrease of the error counters, whose values are placed in bytes 1 and 2 of the message data (not 0 and 1). Fixes: ea8b33bde76c ("can: pcan_usb: add support of rxerr/txerr counters") Link: https://lore.kernel.org/r/20210625130931.27438-4-s.grosjean@peak-system.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-13can: peak_usb: pcan_usb: replace open coded endianness conversion of unaligned dataMarc Kleine-Budde1-26/+11
This patch replaces the open coded endianness conversion of unaligned data by the appropriate get/put_unaligned_leXX() variants. Link: https://lore.kernel.org/r/20210406111622.1874957-11-mkl@pengutronix.de Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-13can: peak_usb: pcan_usb_get_serial(): unconditionally assign serial_numberMarc Kleine-Budde1-3/+1
The function serial_number is only called from one location with a valid serial_number pointer. Remove not needed NULL pointer check. Link: https://lore.kernel.org/r/20210406111622.1874957-10-mkl@pengutronix.de Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-13can: peak_usb: pcan_usb_get_serial(): make use of le32_to_cpup()Marc Kleine-Budde1-6/+2
This patch replaces the memcpy() + le32_to_cpu() by le32_to_cpup(). Link: https://lore.kernel.org/r/20210406111622.1874957-9-mkl@pengutronix.de Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-13can: peak_usb: pcan_usb_get_serial(): remove error message from error pathMarc Kleine-Budde1-4/+5
The caller of pcan_usb_get_serial() already prints an error message, so remove this one and return immediately. Link: https://lore.kernel.org/r/20210406111622.1874957-8-mkl@pengutronix.de Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-13can: peak_usb: pcan_usb_{,pro}_get_device_id(): remove unneeded check for device_idMarc Kleine-Budde2-4/+3
The callback struct peak_usb_adapter::dev_get_device_id, which is implemented by the functions pcan_usb_{,pro}_get_device_id() is only ever called with a valid device_id pointer. This patch removes the unneeded check if the device_id pointer is valid. Link: https://lore.kernel.org/r/20210406111622.1874957-7-mkl@pengutronix.de Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-13can: peak_usb: peak_usb_probe(): make use of driver_infoMarc Kleine-Budde1-33/+24
There's no need to iterate over all supported adapters to find the struct peak_usb_adapter that describes the currently probed devices's capabilities. The driver core gives us the information for free, if we assign it to the struct usb_device_id::driver_info. This patch assigns the usb_device_id::driver_info and converts peak_usb_probe() to make use of it. This reduces the driver size by 100 bytes on ARCH=arm. | add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-124 (-124) | Function old new delta | peak_usb_adapters_list 24 - -24 | peak_usb_probe 236 136 -100 | Total: Before=25263, After=25139, chg -0.49% Link: https://lore.kernel.org/r/20210406111622.1874957-6-mkl@pengutronix.de Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-13can: peak_usb: remove write only variable struct peak_usb_adapter::ts_periodMarc Kleine-Budde4-7/+0
The variable struct peak_usb_adapter::ts_period is only ever written to. This patch removes it from the driver. Link: https://lore.kernel.org/r/20210406111622.1874957-5-mkl@pengutronix.de Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-13can: peak_usb: remove unused variables from struct peak_usb_deviceMarc Kleine-Budde1-4/+0
This patch removes the unused variables struct peak_usb_device::echo_skb and struct peak_usb_device::bus_load from the driver. Link: https://lore.kernel.org/r/20210406111622.1874957-4-mkl@pengutronix.de Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-13can: peak_usb: pcan_usb_pro.h: remove double space in indentionMarc Kleine-Budde1-38/+38
This patch replaces the double space indention after the u8 with a single space in pcan_usb_pro.h. Link: https://lore.kernel.org/r/20210406111622.1874957-3-mkl@pengutronix.de Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-13can: peak_usb: fix checkpatch warningsMarc Kleine-Budde4-4/+5
This patch cleans several checkpatch warnings in the peak_usb driver. Link: https://lore.kernel.org/r/20210406111622.1874957-2-mkl@pengutronix.de Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+5
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-01drivers: net: fix memory leak in peak_usb_create_devPavel Skripkin1-1/+5
syzbot reported memory leak in peak_usb. The problem was in case of failure after calling ->dev_init()[2] in peak_usb_create_dev()[1]. The data allocated int dev_init() wasn't freed, so simple ->dev_free() call fix this problem. backtrace: [<0000000079d6542a>] kmalloc include/linux/slab.h:552 [inline] [<0000000079d6542a>] kzalloc include/linux/slab.h:682 [inline] [<0000000079d6542a>] pcan_usb_fd_init+0x156/0x210 drivers/net/can/usb/peak_usb/pcan_usb_fd.c:868 [2] [<00000000c09f9057>] peak_usb_create_dev drivers/net/can/usb/peak_usb/pcan_usb_core.c:851 [inline] [1] [<00000000c09f9057>] peak_usb_probe+0x389/0x490 drivers/net/can/usb/peak_usb/pcan_usb_core.c:949 Reported-by: syzbot+91adee8d9ebb9193d22d@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-30can: peak_usb: add support of ONE_SHOT modeStephane Grosjean2-5/+15
This patch adds "ONE-SHOT" mode support to the following CAN-USB PEAK-System GmbH interfaces: - PCAN-USB X6 - PCAN-USB FD - PCAN-USB Pro FD - PCAN-Chip USB - PCAN-USB Pro Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> [mkl: split into two patches] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-30can: peak_usb: add support of ethtool set_phys_id()Stephane Grosjean6-1/+126
This patch makes it possible to specifically flash the LED of a CAN port of the CAN-USB interfaces of PEAK-System. Link: https://lore.kernel.org/r/20210309122141.3276927-1-mkl@pengutronix.de Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> [mkl: use common prefix PCAN_ for defines] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-30can: peak_usb: pcan_usb_pro_encode_msg(): use macros for flags instead of plain integersStephane Grosjean1-2/+2
This patch replaces the plain integers used for flags in pcan_usb_pro_encode_msg() by macros which are already defined. Link: https://lore.kernel.org/r/20210309082128.23125-4-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> [mkl: split into two patches] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-30can: dev: can_free_echo_skb(): extend to return can frame lengthMarc Kleine-Budde1-1/+1
In order to implement byte queue limits (bql) in CAN drivers, the length of the CAN frame needs to be passed into the networking stack even if the transmission failed for some reason. To avoid to calculate this length twice, extend can_free_echo_skb() to return that value. Convert all users of this function, too. This patch is the natural extension of commit: | 9420e1d495e2 ("can: dev: can_get_echo_skb(): extend to return can | frame length") Link: https://lore.kernel.org/r/20210319142700.305648-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky3-7/+0
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+4
Conflicts: drivers/net/can/dev.c commit 03f16c5075b2 ("can: dev: can_restart: fix use after free bug") commit 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") Code move. drivers/net/dsa/b53/b53_common.c commit 8e4052c32d6b ("net: dsa: b53: fix an off by one in checking "vlan->vid"") commit b7a9e0da2d1c ("net: switchdev: remove vid_begin -> vid_end range from VLAN objects") Field rename. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20can: peak_usb: fix use after free bugsVincent Mailhol1-4/+4
After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the peak_usb_netif_rx_ni(). Reordering the lines solves the issue. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/r/20210120114137.200019-4-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-14can: dev: can_get_echo_skb(): extend to return can frame lengthMarc Kleine-Budde1-1/+1
In order to implement byte queue limits (bql) in CAN drivers, the length of the CAN frame needs to be passed into the networking stack after queueing and after transmission completion. To avoid to calculate this length twice, extend can_get_echo_skb() to return that value. Convert all users of this function, too. Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20210111141930.693847-14-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-14can: dev: can_put_echo_skb(): extend to handle frame_lenVincent Mailhol1-1/+1
Add a frame_len argument to can_put_echo_skb() which is used to save length of the CAN frame into field frame_len of struct can_skb_priv so that it can be later used after transmission completion. Convert all users of this function, too. Drivers which implement BQL call can_put_echo_skb() with the output of can_skb_get_frame_len(skb) and drivers which do not simply pass zero as an input (in the same way that NULL would be given to can_get_echo_skb()). This way, we have a nice symmetry between the two echo functions. Link: https://lore.kernel.org/r/20210111061335.39983-1-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20210111141930.693847-13-mkl@pengutronix.de Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
2020-11-29can: pcan_usb_core: fix fall-through warnings for ClangGustavo A. R. Silva1-4/+5
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by moving the "default" to the end of the "switch" statement and explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: http://lore.kernel.org/r/aab7cf16bf43cc7c3e9c9930d2dae850c1d07a3c.1605896059.git.gustavoars@kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> [mkl: move default to end] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: drivers: add len8_dlc support for various CAN adaptersOliver Hartkopp2-12/+21
Support the Classical CAN raw DLC functionality to send and receive DLC values from 9 .. 15 on various Classical CAN capable CAN network drivers: - sja1000 - gs_usb - pcan_usb - pcan_usb_fd - usb_8dev Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201111095923.2535-1-socketcan@hartkopp.net [mkl: usb_8dev: changed indention] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: rename CAN FD related can_len2dlc and can_dlc2len helpersOliver Hartkopp1-2/+2
The helper functions can_len2dlc and can_dlc2len are only relevant for CAN FD data length code (DLC) conversion. To fit the introduced can_cc_dlc2len for Classical CAN we rename: can_dlc2len -> can_fd_dlc2len to get the payload length from the DLC can_len2dlc -> can_fd_len2dlc to get the DLC from the payload length Suggested-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201110101852.1973-6-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: replace can_dlc as variable/element for payload lengthOliver Hartkopp3-19/+19
The naming of can_dlc as element of struct can_frame and also as variable name is misleading as it claims to be a 'data length CODE' but in reality it always was a plain data length. With the indroduction of a new 'len' element in struct can_frame we can now remove can_dlc as name and make clear which of the former uses was a plain length (-> 'len') or a data length code (-> 'dlc') value. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201120100444.3199-1-socketcan@hartkopp.net [mkl: gs_usb: keep struct gs_host_frame::can_dlc as is] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: remove obsolete get_canfd_dlc() macroOliver Hartkopp1-1/+1
The macro was always used together with can_dlc2len() which sanitizes the given dlc value on its own. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201110101852.1973-4-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: rename get_can_dlc() macro with can_cc_dlc2len()Oliver Hartkopp2-2/+2
The get_can_dlc() macro is used to ensure the payload length information of the Classical CAN frame to be max 8 bytes (the CAN_MAX_DLEN). Rename the macro and use the correct constant in preparation of the len/dlc cleanup for Classical CAN frames. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201110101852.1973-3-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.