Merge tag 'pinctrl-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "An especially linear and sparse improvement and new drivers release.
  Nothing exciting. The biggest change in Bartosz changes to make
  gpiochip set/get calls return error codes (something we should have
  fixed ages ago but is now finally getting fixed.)

  Core changes:

   - Add the devres devm_pinctrl_register_mappings() call that can
     register some pin control machine mappings and have them go away
     with the associated device

  New drivers:

   - Support for the Mediatek MT6893 and MT8196 SoCs

   - Support for the Renesas RZ/V2N SoC

   - Support for the NXP Freescale i.MX943 SoC

  Improvements:

   - Per-SoC suspend/resume callbacks in the Samsung drivers

   - Set all pins as input (High-Z) at probe in the MCP23S08 driver

   - Switch most GPIO chips to use the setters/getters with a return
     value

   - EGPIO support in the Qualcomm QCM2290 driver

   - Fix up the number of available GPIO lines in Qualcomm QCS8300 and
     QCS615"

* tag 'pinctrl-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
  pinctrl: freescale: Add support for imx943 pinctrl
  pinctrl: core: add devm_pinctrl_register_mappings()
  pinctrl: remove extern specifier for functions in machine.h
  pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms
  pinctrl: freescale: Enable driver if platform is enabled.
  pinctrl: freescale: Depend imx-scu driver on OF
  pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name()
  pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction()
  pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction()
  pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get()
  pinctrl: armada-37xx: propagate error from armada_37xx_gpio_direction_output()
  pinctrl: armada-37xx: set GPIO output value before setting direction
  pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31
  pinctrl: meson: Drop unused aml_pctl_find_group_by_name()
  pinctrl: at91: Fix possible out-of-boundary access
  pinctrl: add stubs for OF-specific pinconf functions
  pinctrl: qcom: correct the ngpios entry for QCS8300
  pinctrl: qcom: correct the ngpios entry for QCS615
  dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300
  dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615
  ...

15 files changed, 771 insertions, 267 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl-a4.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl-a4.yaml
index 78279b9fb737..a6ef4797e5c5 100644
--- a/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl-a4.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl-a4.yaml
@@ -14,7 +14,12 @@ allOf:
 
 properties:
   compatible:
-    const: amlogic,pinctrl-a4
+    oneOf:
+      - const: amlogic,pinctrl-a4
+      - items:
+          - enum:
+              - amlogic,pinctrl-a5
+          - const: amlogic,pinctrl-a4
 
   "#address-cells":
     const: 2
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-iomuxc1.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-iomuxc1.yaml
new file mode 100644
index 000000000000..957918b73a93
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-iomuxc1.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx7ulp-iomuxc1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7ULP IOMUX Controller
+
+description: |
+  i.MX 7ULP has three IOMUXC instances: IOMUXC0 for M4 ports, IOMUXC1 for A7
+  ports and IOMUXC DDR for DDR interface.
+
+  Note: This binding doc is only for the IOMUXC1 support in A7 Domain and it
+  only supports generic pin config.
+
+  Please refer to fsl,imx-pinctrl.txt in this directory for common binding
+  part and usage.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx7ulp-iomuxc1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          Each entry consists of 5 integers which represents the mux
+          and config setting for one pin. The first 4 integers
+          <mux_conf_reg input_reg mux_mode input_val> are specified
+          using a PIN_FUNC_ID macro, which can be found in
+          imx7ulp-pinfunc.h in the device tree source folder.
+          The last integer CONFIG is the pad setting value like
+          pull-up on this pin.
+
+          Please refer to i.MX7ULP Reference Manual for detailed
+          CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_conf_reg" indicates the offset of mux register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_mode" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                CONFIG bits definition:
+                  PAD_CTL_OBE           (1 << 17)
+                  PAD_CTL_IBE           (1 << 16)
+                  PAD_CTL_LK            (1 << 16)
+                  PAD_CTL_DSE_HI        (1 << 6)
+                  PAD_CTL_DSE_STD       (0 << 6)
+                  PAD_CTL_ODE           (1 << 5)
+                  PAD_CTL_PUSH_PULL     (0 << 5)
+                  PAD_CTL_SRE_SLOW      (1 << 2)
+                  PAD_CTL_SRE_STD       (0 << 2)
+                  PAD_CTL_PE            (1 << 0)
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pinctrl@40ac0000 {
+        compatible = "fsl,imx7ulp-iomuxc1";
+        reg = <0x40ac0000 0x1000>;
+
+        lpuart4grp {
+            fsl,pins = <
+                0x000c 0x0248 0x4 0x1 0x1
+                0x0008 0x024c 0x4 0x1 0x1
+            >;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt
deleted file mode 100644
index bfa3703a7446..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale i.MX7ULP IOMUX Controller
-
-i.MX 7ULP has three IOMUXC instances: IOMUXC0 for M4 ports, IOMUXC1 for A7
-ports and IOMUXC DDR for DDR interface.
-
-Note:
-This binding doc is only for the IOMUXC1 support in A7 Domain and it only
-supports generic pin config.
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding
-part and usage.
-
-Required properties:
-- compatible:	"fsl,imx7ulp-iomuxc1".
-- fsl,pins:	Each entry consists of 5 integers which represents the mux
-		and config setting for one pin. The first 4 integers
-		<mux_conf_reg input_reg mux_mode input_val> are specified
-		using a PIN_FUNC_ID macro, which can be found in
-		imx7ulp-pinfunc.h in the device tree source folder.
-		The last integer CONFIG is the pad setting value like
-		pull-up on this pin.
-
-		Please refer to i.MX7ULP Reference Manual for detailed
-		CONFIG settings.
-
-CONFIG bits definition:
-PAD_CTL_OBE		(1 << 17)
-PAD_CTL_IBE		(1 << 16)
-PAD_CTL_LK		(1 << 16)
-PAD_CTL_DSE_HI		(1 << 6)
-PAD_CTL_DSE_STD		(0 << 6)
-PAD_CTL_ODE		(1 << 5)
-PAD_CTL_PUSH_PULL	(0 << 5)
-PAD_CTL_SRE_SLOW	(1 << 2)
-PAD_CTL_SRE_STD		(0 << 2)
-PAD_CTL_PE		(1 << 0)
-
-Examples:
-#include "imx7ulp-pinfunc.h"
-
-/* Pin Controller Node */
-iomuxc1: pinctrl@40ac0000 {
-	compatible = "fsl,imx7ulp-iomuxc1";
-	reg = <0x40ac0000 0x1000>;
-
-	/* Pin Configuration Node */
-	pinctrl_lpuart4: lpuart4grp {
-		fsl,pins = <
-			IMX7ULP_PAD_PTC3__LPUART4_RX	0x1
-			IMX7ULP_PAD_PTC2__LPUART4_TX	0x1
-		>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,vf610-iomuxc.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,vf610-iomuxc.yaml
new file mode 100644
index 000000000000..3e13587df310
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,vf610-iomuxc.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,vf610-iomuxc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Vybrid VF610 IOMUX Controller
+
+description:
+  Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+  and usage.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,vf610-iomuxc
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          two integers array, represents a group of pins mux and config setting.
+          The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a pin
+          working on a specific function, CONFIG is the pad setting value such
+          as pull-up, speed, ode for this pin. Please refer to Vybrid VF610
+          datasheet for the valid pad config settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description:
+                PIN_FUN_ID refer to vf610-pinfunc.h in device tree source folder
+                for all available PIN_FUNC_ID for Vybrid VF610.
+            - description: |
+                CONFIG bits definition is
+                PAD_CTL_SPEED_LOW               (1 << 12)
+                PAD_CTL_SPEED_MED               (2 << 12)
+                PAD_CTL_SPEED_HIGH              (3 << 12)
+                PAD_CTL_SRE_FAST                (1 << 11)
+                PAD_CTL_SRE_SLOW                (0 << 11)
+                PAD_CTL_ODE                     (1 << 10)
+                PAD_CTL_HYS                     (1 << 9)
+                PAD_CTL_DSE_DISABLE             (0 << 6)
+                PAD_CTL_DSE_150ohm              (1 << 6)
+                PAD_CTL_DSE_75ohm               (2 << 6)
+                PAD_CTL_DSE_50ohm               (3 << 6)
+                PAD_CTL_DSE_37ohm               (4 << 6)
+                PAD_CTL_DSE_30ohm               (5 << 6)
+                PAD_CTL_DSE_25ohm               (6 << 6)
+                PAD_CTL_DSE_20ohm               (7 << 6)
+                PAD_CTL_PUS_100K_DOWN           (0 << 4)
+                PAD_CTL_PUS_47K_UP              (1 << 4)
+                PAD_CTL_PUS_100K_UP             (2 << 4)
+                PAD_CTL_PUS_22K_UP              (3 << 4)
+                PAD_CTL_PKE                     (1 << 3)
+                PAD_CTL_PUE                     (1 << 2)
+                PAD_CTL_OBE_ENABLE              (1 << 1)
+                PAD_CTL_IBE_ENABLE              (1 << 0)
+                PAD_CTL_OBE_IBE_ENABLE          (3 << 0)
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt
deleted file mode 100644
index ddcdeb697c29..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Freescale Vybrid VF610 IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,vf610-iomuxc"
-- fsl,pins: two integers array, represents a group of pins mux and config
-  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is
-  a pin working on a specific function, CONFIG is the pad setting value
-  such as pull-up, speed, ode for this pin. Please refer to Vybrid VF610
-  datasheet for the valid pad config settings.
-
-CONFIG bits definition:
-PAD_CTL_SPEED_LOW		(1 << 12)
-PAD_CTL_SPEED_MED		(2 << 12)
-PAD_CTL_SPEED_HIGH		(3 << 12)
-PAD_CTL_SRE_FAST		(1 << 11)
-PAD_CTL_SRE_SLOW		(0 << 11)
-PAD_CTL_ODE			(1 << 10)
-PAD_CTL_HYS			(1 << 9)
-PAD_CTL_DSE_DISABLE		(0 << 6)
-PAD_CTL_DSE_150ohm		(1 << 6)
-PAD_CTL_DSE_75ohm		(2 << 6)
-PAD_CTL_DSE_50ohm		(3 << 6)
-PAD_CTL_DSE_37ohm		(4 << 6)
-PAD_CTL_DSE_30ohm		(5 << 6)
-PAD_CTL_DSE_25ohm		(6 << 6)
-PAD_CTL_DSE_20ohm		(7 << 6)
-PAD_CTL_PUS_100K_DOWN		(0 << 4)
-PAD_CTL_PUS_47K_UP		(1 << 4)
-PAD_CTL_PUS_100K_UP		(2 << 4)
-PAD_CTL_PUS_22K_UP		(3 << 4)
-PAD_CTL_PKE			(1 << 3)
-PAD_CTL_PUE			(1 << 2)
-PAD_CTL_OBE_ENABLE		(1 << 1)
-PAD_CTL_IBE_ENABLE		(1 << 0)
-PAD_CTL_OBE_IBE_ENABLE		(3 << 0)
-
-Please refer to vf610-pinfunc.h in device tree source folder
-for all available PIN_FUNC_ID for Vybrid VF610.
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
index bccff08a5ba3..b9680b896f12 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
@@ -136,75 +136,44 @@ examples:
         #address-cells = <2>;
         #size-cells = <2>;
 
-        syscfg_pctl_a: syscfg-pctl-a@10005000 {
-          compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
-          reg = <0 0x10005000 0 0x1000>;
-        };
-
-        syscfg_pctl_b: syscfg-pctl-b@1020c020 {
-          compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
-          reg = <0 0x1020C020 0 0x1000>;
-        };
-
         pinctrl@1c20800 {
-          compatible = "mediatek,mt8135-pinctrl";
-          reg = <0 0x1000B000 0 0x1000>;
-          mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
-          gpio-controller;
-          #gpio-cells = <2>;
-          interrupt-controller;
-          #interrupt-cells = <2>;
-          interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-              <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-              <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-
-          i2c0_pins_a: i2c0-pins {
-            pins1 {
-              pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
-                <MT8135_PIN_101_SCL0__FUNC_SCL0>;
-              bias-disable;
-            };
-          };
-
-          i2c1_pins_a: i2c1-pins {
-            pins {
-              pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
-                <MT8135_PIN_196_SCL1__FUNC_SCL1>;
-              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            compatible = "mediatek,mt8135-pinctrl";
+            reg = <0 0x1000B000 0 0x1000>;
+            mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+
+            i2c0_pins_a: i2c0-pins {
+                pins1 {
+                    pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
+                             <MT8135_PIN_101_SCL0__FUNC_SCL0>;
+                    bias-disable;
+                };
             };
-          };
 
-          i2c2_pins_a: i2c2-pins {
-            pins1 {
-              pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
-              bias-pull-down;
+            i2c1_pins_a: i2c1-pins {
+                pins {
+                    pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
+                             <MT8135_PIN_196_SCL1__FUNC_SCL1>;
+                    bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+                };
             };
 
-            pins2 {
-              pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
-              bias-pull-up;
-            };
-          };
-
-          i2c3_pins_a: i2c3-pins {
-            pins1 {
-              pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
-                <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;
-              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-            };
-
-            pins2 {
-              pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>,
-                <MT8135_PIN_36_SDA3__FUNC_SDA3>;
-              output-low;
-              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-            };
+            i2c2_pins_a: i2c2-pins {
+                pins1 {
+                    pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
+                    bias-pull-down;
+                };
 
-            pins3 {
-              pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>,
-                <MT8135_PIN_60_JTDI__FUNC_JTDI>;
-              drive-strength = <32>;
+                pins2 {
+                    pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
+                    bias-pull-up;
+                };
             };
-          };
         };
     };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index 3bbc00df5548..f4bab7a132d3 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -245,9 +245,4 @@ examples:
                 };
             };
         };
-
-        mmc0 {
-           pinctrl-0 = <&mmc0_pins_default>;
-           pinctrl-names = "default";
-        };
     };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6893-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6893-pinctrl.yaml
new file mode 100644
index 000000000000..fa189fe00624
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6893-pinctrl.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6893-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6893 Pin Controller
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description:
+  The MediaTek's MT6893 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt6893-pinctrl
+
+  reg:
+    items:
+      - description: pin controller base
+      - description: rm group IO
+      - description: bm group IO
+      - description: lm group IO
+      - description: lb group IO
+      - description: rt group IO
+      - description: lt group IO
+      - description: tm group IO
+      - description: External Interrupt (EINT) controller base
+
+  reg-names:
+    items:
+      - const: base
+      - const: rm
+      - const: bm
+      - const: lm
+      - const: lb
+      - const: rt
+      - const: lt
+      - const: tm
+      - const: eint
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below mentioned gpio
+      binding representation for description of particular cells.
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names: true
+
+  interrupts:
+    description: The interrupt outputs to sysirq
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^pins':
+        type: object
+        allOf:
+          - $ref: /schemas/pinctrl/pincfg-node.yaml
+          - $ref: /schemas/pinctrl/pinmux-node.yaml
+        description:
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+
+        properties:
+          pinmux:
+            description:
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux are defined as macros in
+              arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h for this SoC.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [75000, 5000]
+                description: Pull down RSEL type resistance values (in ohms)
+            description:
+              For normal pull down type there is no need to specify a resistance
+              value, hence this can be specified as a boolean property.
+              For RSEL pull down type a resistance value (in ohms) can be added.
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [10000, 5000, 4000, 3000]
+                description: Pull up RSEL type resistance values (in ohms)
+            description:
+              For normal pull up type there is no need to specify a resistance
+              value, hence this can be specified as a boolean property.
+              For RSEL pull up type a resistance value (in ohms) can be added.
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt65xx.h>
+    #define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+    #define PINMUX_GPIO99__FUNC_SCL0 (MTK_PIN_NO(99) | 1)
+    #define PINMUX_GPIO100__FUNC_SDA0 (MTK_PIN_NO(100) | 1)
+
+    pio: pinctrl@10005000 {
+        compatible = "mediatek,mt6893-pinctrl";
+        reg = <0x10005000 0x1000>,
+              <0x11c20000 0x0200>,
+              <0x11d10000 0x0200>,
+              <0x11e20000 0x0200>,
+              <0x11e70000 0x0200>,
+              <0x11ea0000 0x0200>,
+              <0x11f20000 0x0200>,
+              <0x11f30000 0x0200>,
+              <0x1100b000 0x1000>;
+        reg-names = "base", "rm", "bm", "lm", "lb", "rt",
+                    "lt", "tm", "eint";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 220>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
+        #interrupt-cells = <2>;
+
+        gpio-pins {
+            pins {
+                pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+                bias-pull-up = <4000>;
+                drive-strength = <6>;
+            };
+        };
+
+        i2c0-pins {
+            pins-bus {
+                pinmux = <PINMUX_GPIO99__FUNC_SCL0>,
+                         <PINMUX_GPIO100__FUNC_SDA0>;
+                bias-pull-down = <75000>;
+                drive-strength-microamp = <1000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
index d74cae9d4d65..9acca85184fa 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -366,34 +366,34 @@ examples:
         #size-cells = <2>;
 
         pio: pinctrl@10211000 {
-          compatible = "mediatek,mt7622-pinctrl";
-          reg = <0 0x10211000 0 0x1000>;
-          gpio-controller;
-          #gpio-cells = <2>;
-
-          pinctrl_eth_default: eth-pins {
-            mux-mdio {
-              groups = "mdc_mdio";
-              function = "eth";
-              drive-strength = <12>;
+            compatible = "mediatek,mt7622-pinctrl";
+            reg = <0 0x10211000 0 0x1000>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            pinctrl_eth_default: eth-pins {
+                mux-mdio {
+                    groups = "mdc_mdio";
+                    function = "eth";
+                    drive-strength = <12>;
+                };
+
+                mux-gmac2 {
+                    groups = "rgmii_via_gmac2";
+                    function = "eth";
+                    drive-strength = <12>;
+                };
+
+                mux-esw {
+                    groups = "esw";
+                    function = "eth";
+                    drive-strength = <8>;
+                };
+
+                conf-mdio {
+                    pins = "MDC";
+                    bias-pull-up;
+                };
             };
-
-            mux-gmac2 {
-              groups = "rgmii_via_gmac2";
-              function = "eth";
-              drive-strength = <12>;
-            };
-
-            mux-esw {
-              groups = "esw";
-              function = "eth";
-              drive-strength = <8>;
-            };
-
-            conf-mdio {
-              pins = "MDC";
-              bias-pull-up;
-            };
-          };
         };
     };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
index 8507bd15f243..464879274cae 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
@@ -195,43 +195,43 @@ examples:
         #size-cells = <2>;
 
         pio: pinctrl@10005000 {
-          compatible = "mediatek,mt8183-pinctrl";
-          reg = <0 0x10005000 0 0x1000>,
-                <0 0x11f20000 0 0x1000>,
-                <0 0x11e80000 0 0x1000>,
-                <0 0x11e70000 0 0x1000>,
-                <0 0x11e90000 0 0x1000>,
-                <0 0x11d30000 0 0x1000>,
-                <0 0x11d20000 0 0x1000>,
-                <0 0x11c50000 0 0x1000>,
-                <0 0x11f30000 0 0x1000>,
-                <0 0x1000b000 0 0x1000>;
-          reg-names = "iocfg0", "iocfg1", "iocfg2",
-                "iocfg3", "iocfg4", "iocfg5",
-                "iocfg6", "iocfg7", "iocfg8",
-                "eint";
-          gpio-controller;
-          #gpio-cells = <2>;
-          gpio-ranges = <&pio 0 0 192>;
-          interrupt-controller;
-          interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
-          #interrupt-cells = <2>;
-
-          i2c0_pins_a: i2c0-pins {
-            pins1 {
-              pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
-                <PINMUX_GPIO49__FUNC_SDA5>;
-              mediatek,pull-up-adv = <3>;
-              drive-strength-microamp = <1000>;
+            compatible = "mediatek,mt8183-pinctrl";
+            reg = <0 0x10005000 0 0x1000>,
+                  <0 0x11f20000 0 0x1000>,
+                  <0 0x11e80000 0 0x1000>,
+                  <0 0x11e70000 0 0x1000>,
+                  <0 0x11e90000 0 0x1000>,
+                  <0 0x11d30000 0 0x1000>,
+                  <0 0x11d20000 0 0x1000>,
+                  <0 0x11c50000 0 0x1000>,
+                  <0 0x11f30000 0 0x1000>,
+                  <0 0x1000b000 0 0x1000>;
+            reg-names = "iocfg0", "iocfg1", "iocfg2",
+                  "iocfg3", "iocfg4", "iocfg5",
+                  "iocfg6", "iocfg7", "iocfg8",
+                  "eint";
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pio 0 0 192>;
+            interrupt-controller;
+            interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+            #interrupt-cells = <2>;
+
+            i2c0_pins_a: i2c0-pins {
+                pins1 {
+                  pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+                           <PINMUX_GPIO49__FUNC_SDA5>;
+                    mediatek,pull-up-adv = <3>;
+                    drive-strength-microamp = <1000>;
+                };
             };
-          };
 
-          i2c1_pins_a: i2c1-pins {
-            pins {
-              pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
-                <PINMUX_GPIO51__FUNC_SDA3>;
-              mediatek,pull-down-adv = <2>;
+            i2c1_pins_a: i2c1-pins {
+                pins {
+                    pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+                             <PINMUX_GPIO51__FUNC_SDA3>;
+                    mediatek,pull-down-adv = <2>;
+                };
             };
-          };
         };
     };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml
index 1686427eb854..949dcd6fd847 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml
@@ -142,43 +142,43 @@ additionalProperties: false
 
 examples:
   - |
-            #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
-            #include <dt-bindings/interrupt-controller/arm-gic.h>
-            pio: pinctrl@10005000 {
-                    compatible = "mediatek,mt8192-pinctrl";
-                    reg = <0x10005000 0x1000>,
-                          <0x11c20000 0x1000>,
-                          <0x11d10000 0x1000>,
-                          <0x11d30000 0x1000>,
-                          <0x11d40000 0x1000>,
-                          <0x11e20000 0x1000>,
-                          <0x11e70000 0x1000>,
-                          <0x11ea0000 0x1000>,
-                          <0x11f20000 0x1000>,
-                          <0x11f30000 0x1000>,
-                          <0x1000b000 0x1000>;
-                    reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
-                          "iocfg_bl", "iocfg_br", "iocfg_lm",
-                          "iocfg_lb", "iocfg_rt", "iocfg_lt",
-                          "iocfg_tl", "eint";
-                    gpio-controller;
-                    #gpio-cells = <2>;
-                    gpio-ranges = <&pio 0 0 220>;
-                    interrupt-controller;
-                    interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
-                    #interrupt-cells = <2>;
-
-                    spi1-default-pins {
-                            pins-cs-mosi-clk {
-                                    pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
-                                             <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
-                                             <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
-                                    bias-disable;
-                            };
-
-                            pins-miso {
-                                    pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
-                                    bias-pull-down;
-                            };
-                    };
+    #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pio: pinctrl@10005000 {
+        compatible = "mediatek,mt8192-pinctrl";
+        reg = <0x10005000 0x1000>,
+              <0x11c20000 0x1000>,
+              <0x11d10000 0x1000>,
+              <0x11d30000 0x1000>,
+              <0x11d40000 0x1000>,
+              <0x11e20000 0x1000>,
+              <0x11e70000 0x1000>,
+              <0x11ea0000 0x1000>,
+              <0x11f20000 0x1000>,
+              <0x11f30000 0x1000>,
+              <0x1000b000 0x1000>;
+        reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
+              "iocfg_bl", "iocfg_br", "iocfg_lm",
+              "iocfg_lb", "iocfg_rt", "iocfg_lt",
+              "iocfg_tl", "eint";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 220>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
+        #interrupt-cells = <2>;
+
+        spi1-default-pins {
+            pins-cs-mosi-clk {
+                pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
+                         <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
+                         <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
+                bias-disable;
             };
+
+            pins-miso {
+                pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
+                bias-pull-down;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8196-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8196-pinctrl.yaml
new file mode 100644
index 000000000000..9082bd625e2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8196-pinctrl.yaml
@@ -0,0 +1,236 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8196-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8196 Pin Controller
+
+maintainers:
+  - Lei Xue <lei.xue@mediatek.com>
+  - Cathy Xu <ot_cathy.xu@mediatek.com>
+
+description:
+  The MediaTek's MT8196 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8196-pinctrl
+
+  reg:
+    items:
+      - description: gpio base
+      - description: rt group IO
+      - description: rm1 group IO
+      - description: rm2 group IO
+      - description: rb group IO
+      - description: bm1 group IO
+      - description: bm2 group IO
+      - description: bm3 group IO
+      - description: lt group IO
+      - description: lm1 group IO
+      - description: lm2 group IO
+      - description: lb1 group IO
+      - description: lb2 group IO
+      - description: tm1 group IO
+      - description: tm2 group IO
+      - description: tm3 group IO
+      - description: eint0 group IO
+      - description: eint1 group IO
+      - description: eint2 group IO
+      - description: eint3 group IO
+      - description: eint4 group IO
+
+  reg-names:
+    items:
+      - const: base
+      - const: rt
+      - const: rm1
+      - const: rm2
+      - const: rb
+      - const: bm1
+      - const: bm2
+      - const: bm3
+      - const: lt
+      - const: lm1
+      - const: lm2
+      - const: lb1
+      - const: lb2
+      - const: tm1
+      - const: tm2
+      - const: tm3
+      - const: eint0
+      - const: eint1
+      - const: eint2
+      - const: eint3
+      - const: eint4
+
+  interrupts:
+    description: The interrupt outputs to sysirq.
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      Number of cells in GPIO specifier, should be two. The first cell is the
+      pin number, the second cell is used to specify optional parameters which
+      are defined in <dt-bindings/gpio/gpio.h>.
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names: true
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^pins':
+        type: object
+        $ref: /schemas/pinctrl/pincfg-node.yaml
+        additionalProperties: false
+        description:
+          A pinctrl node should contain at least one subnode representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+
+        properties:
+          pinmux:
+            description:
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h
+              directly, for this SoC.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8196 pull down PUPD/R0/R1 type define value.
+              - enum: [75000, 5000]
+                description: mt8196 pull down RSEL type si unit value(ohm).
+            description: |
+              For pull down type is normal, it doesn't need add R1R0 define
+              and resistance value.
+              For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8196.
+              For pull down type is PD/RSEL, it can add resistance value(ohm)
+              to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit". It can support resistance
+              value(ohm) "75000" & "5000" in mt8196.
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8196 pull up PUPD/R0/R1 type define value.
+              - enum: [1000, 1500, 2000, 3000, 4000, 5000, 75000]
+                description: mt8196 pull up RSEL type si unit value(ohm).
+            description: |
+              For pull up type is normal, it don't need add R1R0 define
+              and resistance value.
+              For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8196.
+              For pull up type is PU/RSEL, it can add resistance value(ohm)
+              to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit". It can support resistance
+              value(ohm) "1000" & "1500" & "2000" & "3000" & "4000" & "5000" &
+              "75000" in mt8196.
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/mt65xx.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #define PINMUX_GPIO99__FUNC_SCL0 (MTK_PIN_NO(99) | 1)
+    #define PINMUX_GPIO100__FUNC_SDA0 (MTK_PIN_NO(100) | 1)
+
+    pio: pinctrl@1002d000 {
+        compatible = "mediatek,mt8196-pinctrl";
+        reg = <0x1002d000 0x1000>,
+              <0x12000000 0x1000>,
+              <0x12020000 0x1000>,
+              <0x12040000 0x1000>,
+              <0x12060000 0x1000>,
+              <0x12820000 0x1000>,
+              <0x12840000 0x1000>,
+              <0x12860000 0x1000>,
+              <0x13000000 0x1000>,
+              <0x13020000 0x1000>,
+              <0x13040000 0x1000>,
+              <0x130f0000 0x1000>,
+              <0x13110000 0x1000>,
+              <0x13800000 0x1000>,
+              <0x13820000 0x1000>,
+              <0x13860000 0x1000>,
+              <0x12080000 0x1000>,
+              <0x12880000 0x1000>,
+              <0x13080000 0x1000>,
+              <0x13880000 0x1000>,
+              <0x1c54a000 0x1000>;
+        reg-names = "base", "rt", "rm1", "rm2", "rb" , "bm1",
+                    "bm2", "bm3", "lt", "lm1", "lm2", "lb1",
+                    "lb2", "tm1", "tm2", "tm3", "eint0", "eint1",
+                    "eint2", "eint3", "eint4";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 271>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>;
+        #interrupt-cells = <2>;
+
+        i2c0-pins {
+            pins {
+                pinmux = <PINMUX_GPIO99__FUNC_SCL0>,
+                         <PINMUX_GPIO100__FUNC_SDA0>;
+                bias-disable;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml
index 1ce4b5df584a..2791e578c1de 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml
@@ -110,7 +110,7 @@ examples:
               <0x03c00000 0x300000>;
         reg-names = "east", "west", "south";
         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-        gpio-ranges = <&tlmm 0 0 123>;
+        gpio-ranges = <&tlmm 0 0 124>;
         gpio-controller;
         #gpio-cells = <2>;
         interrupt-controller;
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml
index bb0d7132886a..489b41dcc179 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml
@@ -106,7 +106,7 @@ examples:
         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
         gpio-controller;
         #gpio-cells = <2>;
-        gpio-ranges = <&tlmm 0 0 133>;
+        gpio-ranges = <&tlmm 0 0 134>;
         interrupt-controller;
         #interrupt-cells = <2>;
 
diff --git a/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml
index b01ecd83b71b..d80e88aa07b4 100644
--- a/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml
@@ -17,6 +17,19 @@ properties:
     items:
       - description: pinctrl io memory base
 
+  clocks:
+    items:
+      - description: Functional Clock
+      - description: Bus Clock
+
+  clock-names:
+    items:
+      - const: func
+      - const: bus
+
+  resets:
+    maxItems: 1
+
 patternProperties:
   '-cfg$':
     type: object
@@ -94,6 +107,8 @@ patternProperties:
 required:
   - compatible
   - reg
+  - clocks
+  - clock-names
 
 additionalProperties: false
 
@@ -108,6 +123,9 @@ examples:
         pinctrl@d401e000 {
             compatible = "spacemit,k1-pinctrl";
             reg = <0x0 0xd401e000 0x0 0x400>;
+            clocks = <&syscon_apbc 42>,
+                     <&syscon_apbc 94>;
+            clock-names = "func", "bus";
 
             uart0_2_cfg: uart0-2-cfg {
                 uart0-2-pins {